Changes

suites/gprs/: beautify output result of ping tests

Print ping output at the end and replace the whole test stdout report
with ping execution.

Change-Id: I90001ddc6bc1145ac9d115aee762f4f3500e8dc8

epc: Replace rlc_drb_mode with qci attribute

Change-Id: I21b7d7009f9b0df8ec4f59189a65cfc26f164f04

amarisoft_enb: Support zmq rf_driver

Change-Id: I958834d99584e33f632b839a0bd0acccc2379049

amarisoft_rf_driver_temp: fix tx time offset for ZMQ driver

Change-Id: Icee282837e62e02a17b93efba4c22756efa2a5d3

amarisoft_enb: add handling of num_cells modifier

the num_cells modifier allows to create multiple cells in a single enb
both cells are by default configured for CA

Change-Id: Ie9f16ce06ee56002c01097f2d338278f09ea4337

srsue.conf.tmpl: fix the configuration of UE params for carrier aggregation

the num_carriers is parsed as a string in the conf dict and therefore
needs to converted to int before matching

also changed the num_carriers to be of type UINT

Change-Id: I1386812d32e1181ba666720bbb875bf9bbce0f51

contrib: build amarisoft: Set trx_zmq.so RPATH to point to copied dependency libsrslte_rf.so

In the ENB case it's not really required since osmo-gsm-tester makes use
of LD_LIBRARY_PATH. However, since the UE is potentially run with
capabilitites to create tunnels and alike, LD_LIBRARY_PATH cannot be
used and lteue will fail to load trx_zmq.so (because it cannot find its
dependency libsrslte_rf.so).

Change-Id: Ifcbc6ed1c4c465b4cfab4c5689cde44624095f29

pcu: Improve logging and gsmtap

Change-Id: I506a39b114eed55a185d329cea5e9d6ba379a2ae

templates: Improve cs7 config in osmo-{bsc,msc}

Change-Id: I0aa0057c85e606d45e67d01b818db7549033bdbd

amarisoftUE: adding basic support for Amarisoft UE

Change-Id: Idda0d3a040663969dd71781814198b47fff7daf3

amarisoftue.cfg.tmpl: fix UE bandwidth/rate config and power on automatically

Change-Id: I2d63055d0648a1758905fd277c20edaeec8f9b85

enb: add measurement modifier to scenario files

this commit adds basic support for configuring measurements in the
eNB config. It currently support A1, A2, and A3 events.
By default UE measurements are turned off and need to be enabled by
configuring an event with:

+mod-enb-meas-event@{name},{report_type},{value},{hysterisis},{time to trigger}

For example one can update the a2 and a3 event with:

+mod-enb-meas-event@a2,rsrq,-40,2,480+mod-enb-meas-event@a3,rsrp,6,1,512

Change-Id: Ia7657be2396886840570bc41645450a268b4cfff

pcu: Enable 'egprs only' vty option if egprs requested

Change-Id: Idd0b5bf8769d693480268c0a0b89dbfd63779e48

Move suites/ dir inside example/

example/paths.conf and documentation are updated accordingly.

Test suites should have been moved a long time ago, since the they are
user or setup-specific based on what needs to be tested.

Change-Id: I154b19979b545deba8b232b60172903f63fd9e28

amarisoft_ue: fix UHD support

the Amarisoft UE seems to be only working with UHD when the bandwidth
param is provided. It seems the set_bandwidth() API is used.

Change-Id: I3f20a5a8ca80c63374f0ad500fd2794e2dc45479

srs/amarisoft{ue,enb}: Fix b200 specific rf_dev_args

Commit 12ae6d79a5b53a213f619999ef0230c1dae88bb7 switched the rf_dev_type
to be in lowercase but forgot to change these conditions.

Change-Id: I91d3877381b4e6343dc4aa0465e699341ed6648d

utils/bin: Support passing several bin files to setcap helper scripts

Change-Id: Ifa43f895ae0796d086f35778263aaba07f2e1b7a

amarisoft_ue: Implement data plane

Use the ifup script to set up the netns + configure the tun device
created by lteue. Use it also as a hook to know when the UE is attached.
Since tun setup is done by arch-optimized lte-avx(2) binaries, we also
need to give capabilitites to them (instead of allowing inheritance of
caps in general in the setcap script).

Change-Id: I1e228b1296eac8e4cb183c2faa735b0468abe124

pcu_{sysmo,oc2g}: Inherit from pcu abstract class

For some reason these classes were still not inheriting from the base
class (probably because it was added after they existed) and they
started failing after recent changes which presumed they where already
inheriting.

Change-Id: I88217baf490ec45373d0743585377ed2639a8cfd

bts_oc2g: Fix missing import remote

Change-Id: I318683b8dc6215f5bf863cfb1581e2c3bfa05621

bts_oc2g: Fix ready_for_pcu() waiting forever

Change-Id: Id33e527591164b87d1e14b7922247b726267ad6e

Get rid of install top directory

Some content there is out of date, or should be mvoed to utils/ with the
rest of installable stuff.

Change-Id: I17ee94b175deb88faff71e7788c482093693f8a8

Move example/ and ttcn3/ to sysmocom/ and sysmocom/ttcn3

This content is mostly specific to sysmocom's setup (thought it can
still be re-used by other people if willing to).

symlinks in ttcn3/ pointing to example/ are redone to point to
sysmocom/.

Change-Id: I364e0859c0851b9167907a4d948b659a0f6a19fb

Introduce doc/examples/ directory

It contains simple usual setups to get started with osmo-gsm-tester,
such as creating a 4G network using srsLTE or a 2G network using the
osmocom stack (+ ofono modems).

Change-Id: I55d5b1152da201799af21a77ef6c562f97bd94fc

Rename object classes to be {obj_class}_{implementation}

Change-Id: Ieafd96d7ee5b4baef08ca767629b93834f6a8c7c

Create core directory to contain most of code not in object classes used by tests

Change-Id: I9aec6c55ccd71894182057d36e0025b69925d314

Move object classes used by tests into obj/ subdir

Change-Id: I0b2963cf00acd1f9036dca2e87aa3b87a0f8066d

Rename modem.py to ms_ofono.py

Change-Id: I050970986b0b3fbc23b756c5b7c524cb8b7c1327

iperf3: Avoid using --logfile arg

Some older iperf3 versions don't support the --logfile arg. Let's
instead parse the json from stdout. Old --logfile behavior is left in
code but disabled since it's a nicer (less hacky) way to get results,
because parsing from stdout means we need to avoid reading some content.

Change-Id: Ia1b7fa4dae074089878963aeddf0006aea68e31f

enb_amarisoft: fix enb conf template name

issue has been introduced during refactor of enb class names

Change-Id: Ib3ad6451c3979440be28d8811f51ce5d1c103518

enb_srs.py: Pass filenames to main cfg file template instead of cmdline args

Change-Id: Ifec6a8a9c29b94634f6ac7ea50aae9b8e18ae3cb

epc_srs.py: Pass filenames to main cfg file template instead of cmdline args

Change-Id: I1ac3a3cace7ec2b0f85c5d9a5f97d5007d7c65ac

ms_srs.py: Pass filenames to main cfg file template instead of cmdline args

Change-Id: Id2a6ba17d087d2ff67fe10b1dae6434259e74366

enb: add optional gtp_bind_addr paramter to enb class

this allows to optionally specify a the GTP bind_address for a enb object
in the resources.conf

this address is then used for binding the listening socket for gtp connections
which, in turn, allows to run the enb and epc on the same host.

when gtp_bind_addr is not specified, addr is used by default

this is especially useful if eNB and EPC run on the same host
and ZMQ is used for RF between eNB and UE. Two eNB addresses
are needed in this case, one bind address and one "remote-accessable"
address for the UEs ZMQ radio to connect to

Change-Id: I4fe38f31401428ed3e74e1d0b64960f0af122d37

powersupply: Import sublcass module only if used

This way we avoid unconditionally importing all subclass dependencies,
and make them optional based on whether the setup has devices of that
type or not.

Change-Id: I0d2f8b26364b45f0d837cc51078784d1d0fa7ea1

check_dependencies: Import modules dynamically and find related debian packages

This way we don't need to manually add new imports here or drop unusued
ones. It also makes sure local imports in all our py files is correct.
For instance, running the script already caught an issue which is added
to this patch (osmo_ms_driver/__main__.py).

This new version of the script also allows specifying subsets of
features to skip when checking for dependencies. This way, for instance
somebody not willing to use a sispm powersupply can stil check all the
needed dependencies are fine.

This new tool will make it easier to slowly make some dependencies only
used by some object test classes optional (for instance, python-smpplib
if user doesn't want to run an ESME node).

It also allows to retrieve the required debian/manually installed
packages when run with "-p" option:
"""
Debian packages:
        libpython3.5-minimal:amd64
        python3-gi
        python3-six
        libpython3.5-stdlib:amd64
        python3-pygments
        python3-yaml
        python3-mako
        python3-numpy
        python3-markupsafe

Modules without debian package (pip or setuptools?):
        usb                  [dpkg-query: no path found matching pattern /usr/local/lib/python3.5/dist-packages/usb/_interop.py]
        pydbus               [dpkg-query: no path found matching pattern /usr/local/lib/python3.5/dist-packages/pydbus/proxy.py]
        smpplib              [dpkg-query: no path found matching pattern /usr/local/lib/python3.5/dist-packages/smpplib/command_codes.py]
        sispm                [dpkg-query: no path found matching pattern /usr/local/lib/python3.5/dist-packages/sispm/__init__.py]
"""

Change-Id: I29ddf8971837754abd930d847bd1036e8e510de6

enb: Add cell_list attribute

It allows configuring each cell_list up to a maximum of 'num_cells'.

Change-Id: I4fd30a3e37789b76bfaddc2beba1815154daab7f

powersupply.py: Fix import module line typo

Recent commit changed the import line so it runs only when required, but
added a typo making tests uing it fail.

Change-Id: Id3e5c16adc763a9b79cc464937c541abd15f98de
Fixes: 2b959580b9affe729e966c506656b7f47926c4bf

srsenb_rr.conf.tmpl: Fix whitespace

Change-Id: Ic2b4d8e2468984b096a870c878fa5d032ea4130f

enb: Implement initial RF emulation API

Two implementations are provided:
* Amarisoft Ctrl interface (websocket)
* Mini-Circuits Programmable Attenuator (HW, HTTP API) [1]

in Amarisoft ENBs, if no rfemu is configured explicitly, the Ctrl
interface one is used by default, while still being possible to use the
HW one.

[1] https://www.minicircuits.com/pdfs/RC4DAT-6G-60.pdf

Change-Id: Ie98a3fb9bcd2b87b96ecbb5b79e0f53981892a32

enb: Add attribute to set 'id'

Change-Id: I8ce296c7875d557062dc13e7093ce0400050f2ce

srsue, amarisoft/srsENB: Support setting rx/tx_gain attributes

Change-Id: I4228ba8746a54db4c17443718c01069d431361b9

AmarisoftUE: Fix setting tx/rx gain attr

Fixes: a6d6304afccbd37462acf9ad8207d6ac29f25da9
Change-Id: I344313863390a00604045dcc18e552aa789b282f

AmarisoftENB: Support setting PCI value

Change-Id: Ibffb95f9b55e145d76ba64119a73ef9f1ed7cdef

enb: Introduce support for neighbour cell list

Change-Id: If604f1f2643a73f8c4da6ae3e9d24cd6c7e52d06

srsenb: Support neighbour and secondary cell lists in config file

Change-Id: I8fe0703b7d9db69658c112066404d2da1c3d1e09

amarisoftENB: Fix running with num_cells=2

The B200 device being used in the physical setup doesn't support several
RF ports, so let's hardcode it to 0 for now.

Change-Id: Id4c31be2bd0c75f469e2293ade011c7b7ceedb1c

jenkins-build-amarisoft: turn off other RF libs when building for zmq driver

Change-Id: Ie4819d3f454d74e14829d02fbdc62a12f2d54cd5

jenkins-build-common.sh: also pass additional build flags to CMake

Change-Id: I1c5998d31201505d0a2532f22f905ec155d6c094

amarisoft_enb: use two antenna ports for TM > 1

Change-Id: Ia241f96341780760d482d389097659b0f7b897e8

enb: refactored rf_args handling for ZMQ-based radio

this patch moves the rf_dev_args creation for both eNB types
into the eNB base class, since they are identical.

the patch also fixes the arguments for all CA and MIMO configurations

Change-Id: I8ca3ed83e65dc07927385267e5970bc4f5b120d5

ms_srs: fix ZMQ radio arguments for CA and MIMO configs

similar to the eNB patches this fixes the CA and MIMO radio
parameters. In pricinple this could also be reused for the
AmarisoftUE but since we currently don't have a means to test
it I left it for a future commit.

Change-Id: I16b00009f97d61a9ab4715e5d727024661d3d0be

srsenb_rr.conf.tmpl: extend CQI and SR subframe scheduling

this fixes an issues when allocating CQI resources for multiple carriers
or multiple users

Change-Id: I8b9345502003da2f5b6841a98b77375656e84d8c

Generate schemas dynamically from pieces provided by each object class

This way we benefit from:
* knowing which attributes are used/required by each object class and
  subclass
* Having validation function definitions near the class going to use them

Change-Id: I8fd6773c51d19405a585977af4ed72cad2b21db1

Move object subclass instance allocation logic out of suite.py/resource.py

This way we get rid of object related content in resource.py and we can
finally move it to core/ in next commit.

Change-Id: Ia5b861115ae3ae1b90149863c4265dcc730b8cd4

Move resource.py to core/

Change-Id: I0f36a5e61ff0ef14d08165c9c184acdf2d6e6901

Move test.py and report.py to core/

Change-Id: Ibb7fa5ab40bcf1e59705bdd2c2c5a76025b2b544

Move all obj/ references in suite.py to testenv.py

Change-Id: If4ab39be7a97d33e82c5a34e2a10dfec38613a4e

Move trial.py and suite.py to core/

Change-Id: Ic9a4c90c190e9d8e1829fbef83a9243f3c6f655b

Update obj classes in obj/ to use testenv instead of suite_run

Change-Id: Idf41243a497de7bc507b9f1cd1b38640f456f815