Skipping 455 KB..
Full Logasciidoc: reading: /opt/osmo-gsm-manuals/build/mscgen-filter.conf
asciidoc: reading: /opt/osmo-gsm-manuals/build/diag-filter.conf
asciidoc: reading: /opt/osmo-gsm-manuals/build/docinfo-releaseinfo.conf
asciidoc: reading: /opt/osmo-gsm-manuals/build/graphviz-filter.conf
asciidoc: reading: /etc/asciidoc/asciidoc.conf
asciidoc: reading: /build/osmo-smlc-0.3.1/_build/sub/doc/manuals/osmosmlc-usermanual.adoc
asciidoc: reading: /etc/asciidoc/docbook45.conf
asciidoc: reading: /etc/asciidoc/filters/music/music-filter.conf
asciidoc: reading: /etc/asciidoc/filters/latex/latex-filter.conf
asciidoc: reading: /etc/asciidoc/filters/code/code-filter.conf
asciidoc: reading: /etc/asciidoc/filters/source/source-highlight-filter.conf
asciidoc: reading: /etc/asciidoc/filters/graphviz/graphviz-filter.conf
asciidoc: reading: /etc/asciidoc/lang-en.conf
asciidoc: reading: /opt/osmo-gsm-manuals/build/mscgen-filter.conf
asciidoc: reading: /opt/osmo-gsm-manuals/build/diag-filter.conf
asciidoc: reading: /opt/osmo-gsm-manuals/build/docinfo-releaseinfo.conf
asciidoc: reading: /opt/osmo-gsm-manuals/build/graphviz-filter.conf
asciidoc: writing: /build/osmo-smlc-0.3.1/_build/sub/doc/manuals/osmosmlc-usermanual.xml
asciidoc: osmosmlc-usermanual.adoc: line 6: evaluating: {include:/build/osmo-smlc-0.3.1/_build/sub/doc/manuals/osmosmlc-usermanual-docinfo.xml}
asciidoc: WARNING: osmosmlc-usermanual.adoc: line 6: {include:/build/osmo-smlc-0.3.1/_build/sub/doc/manuals/osmosmlc-usermanual-docinfo.xml}: file does not exist
asciidoc: include: /build/osmo-smlc-0.3.1/_build/sub/doc/manuals/common/chapters/preface.adoc
asciidoc: osmosmlc-usermanual.adoc: line 9: reading: /build/osmo-smlc-0.3.1/_build/sub/doc/manuals/common/chapters/preface.adoc
Build the book set list...
asciidoc: include: /build/osmo-smlc-0.3.1/_build/sub/../../doc/manuals/chapters/overview.adoc
asciidoc: osmosmlc-usermanual.adoc: line 11: reading: /build/osmo-smlc-0.3.1/_build/sub/../../doc/manuals/chapters/overview.adoc
asciidoc: include: /build/osmo-smlc-0.3.1/_build/sub/../../doc/manuals/chapters/running.adoc
asciidoc: osmosmlc-usermanual.adoc: line 13: reading: /build/osmo-smlc-0.3.1/_build/sub/../../doc/manuals/chapters/running.adoc
asciidoc: include: /build/osmo-smlc-0.3.1/_build/sub/doc/manuals/common/chapters/vty.adoc
asciidoc: osmosmlc-usermanual.adoc: line 15: reading: /build/osmo-smlc-0.3.1/_build/sub/doc/manuals/common/chapters/vty.adoc
asciidoc: include: /build/osmo-smlc-0.3.1/_build/sub/doc/manuals/common/chapters/logging.adoc
asciidoc: osmosmlc-usermanual.adoc: line 17: reading: /build/osmo-smlc-0.3.1/_build/sub/doc/manuals/common/chapters/logging.adoc
asciidoc: include: /build/osmo-smlc-0.3.1/_build/sub/doc/manuals/common/chapters/cs7-config.adoc
asciidoc: osmosmlc-usermanual.adoc: line 19: reading: /build/osmo-smlc-0.3.1/_build/sub/doc/manuals/common/chapters/cs7-config.adoc
Build the listings...
asciidoc: include: /build/osmo-smlc-0.3.1/_build/sub/../../doc/manuals/chapters/positioning.adoc
asciidoc: osmosmlc-usermanual.adoc: line 21: reading: /build/osmo-smlc-0.3.1/_build/sub/../../doc/manuals/chapters/positioning.adoc
asciidoc: include: /build/osmo-smlc-0.3.1/_build/sub/../../doc/manuals/chapters/cells.adoc
asciidoc: osmosmlc-usermanual.adoc: line 23: reading: /build/osmo-smlc-0.3.1/_build/sub/../../doc/manuals/chapters/cells.adoc
asciidoc: include: /build/osmo-smlc-0.3.1/_build/sub/doc/manuals/common/chapters/counters-overview.adoc
asciidoc: osmosmlc-usermanual.adoc: line 25: reading: /build/osmo-smlc-0.3.1/_build/sub/doc/manuals/common/chapters/counters-overview.adoc
asciidoc: include: /build/osmo-smlc-0.3.1/_build/sub/doc/manuals/common/chapters/control_if.adoc
asciidoc: osmosmlc-usermanual.adoc: line 29: reading: /build/osmo-smlc-0.3.1/_build/sub/doc/manuals/common/chapters/control_if.adoc
asciidoc: control_if.adoc: line 25: evaluating: {counter2:target-number}
asciidoc: control_if.adoc: line 25: evaluating: {set2:target:osmosmlc-usermanual__1.svg}
asciidoc: control_if.adoc: line 32: filtering: packetdiag3 -o "/build/osmo-smlc-0.3.1/_build/sub/doc/manuals/osmosmlc-usermanual__1.svg" -Tsvg - && echo " "
XSLT stylesheets DocBook - LaTeX 2e (0.3.12)
===================================================
Stripping NS from DocBook 5/NG document.
Processing stripped document.
asciidoc: control_if.adoc: line 40: evaluating: {counter2:target-number}
asciidoc: control_if.adoc: line 40: evaluating: {set2:target:osmosmlc-usermanual__2.svg}
asciidoc: control_if.adoc: line 46: filtering: packetdiag3 -o "/build/osmo-smlc-0.3.1/_build/sub/doc/manuals/osmosmlc-usermanual__2.svg" -Tsvg - && echo " "
Build _temp_osmosmlc-vty-reference.pdf
asciidoc: control_if.adoc: line 77: evaluating: {counter2:target-number}
asciidoc: control_if.adoc: line 77: evaluating: {set2:target:osmosmlc-usermanual__3.svg}
asciidoc: control_if.adoc: line 83: filtering: "/usr/bin/python3" "./build/filter-wrapper.py" mscgen -o "/build/osmo-smlc-0.3.1/_build/sub/doc/manuals/osmosmlc-usermanual__3.svg" -Tsvg -
asciidoc: control_if.adoc: line 88: evaluating: {counter2:target-number}
asciidoc: control_if.adoc: line 88: evaluating: {set2:target:osmosmlc-usermanual__4.svg}
asciidoc: control_if.adoc: line 94: filtering: "/usr/bin/python3" "./build/filter-wrapper.py" mscgen -o "/build/osmo-smlc-0.3.1/_build/sub/doc/manuals/osmosmlc-usermanual__4.svg" -Tsvg -
asciidoc: control_if.adoc: line 104: evaluating: {counter2:target-number}
asciidoc: control_if.adoc: line 104: evaluating: {set2:target:osmosmlc-usermanual__5.svg}
asciidoc: control_if.adoc: line 110: filtering: "/usr/bin/python3" "./build/filter-wrapper.py" mscgen -o "/build/osmo-smlc-0.3.1/_build/sub/doc/manuals/osmosmlc-usermanual__5.svg" -Tsvg -
asciidoc: control_if.adoc: line 115: evaluating: {counter2:target-number}
asciidoc: control_if.adoc: line 115: evaluating: {set2:target:osmosmlc-usermanual__6.svg}
asciidoc: control_if.adoc: line 121: filtering: "/usr/bin/python3" "./build/filter-wrapper.py" mscgen -o "/build/osmo-smlc-0.3.1/_build/sub/doc/manuals/osmosmlc-usermanual__6.svg" -Tsvg -
asciidoc: control_if.adoc: line 131: evaluating: {counter2:target-number}
asciidoc: control_if.adoc: line 131: evaluating: {set2:target:osmosmlc-usermanual__7.svg}
asciidoc: control_if.adoc: line 136: filtering: "/usr/bin/python3" "./build/filter-wrapper.py" mscgen -o "/build/osmo-smlc-0.3.1/_build/sub/doc/manuals/osmosmlc-usermanual__7.svg" -Tsvg -
asciidoc: include: /build/osmo-smlc-0.3.1/_build/sub/doc/manuals/common/chapters/port_numbers.adoc
asciidoc: osmosmlc-usermanual.adoc: line 33: reading: /build/osmo-smlc-0.3.1/_build/sub/doc/manuals/common/chapters/port_numbers.adoc
asciidoc: include: /build/osmo-smlc-0.3.1/_build/sub/doc/manuals/common/chapters/bibliography.adoc
asciidoc: osmosmlc-usermanual.adoc: line 35: reading: /build/osmo-smlc-0.3.1/_build/sub/doc/manuals/common/chapters/bibliography.adoc
asciidoc: include: /build/osmo-smlc-0.3.1/_build/sub/doc/manuals/common/chapters/glossary.adoc
asciidoc: osmosmlc-usermanual.adoc: line 37: reading: /build/osmo-smlc-0.3.1/_build/sub/doc/manuals/common/chapters/glossary.adoc
asciidoc: include: /build/osmo-smlc-0.3.1/_build/sub/doc/manuals/common/chapters/gfdl.adoc
asciidoc: osmosmlc-usermanual.adoc: line 39: reading: /build/osmo-smlc-0.3.1/_build/sub/doc/manuals/common/chapters/gfdl.adoc
'osmosmlc-vty-reference.pdf' successfully built
+ rm /build/osmo-smlc-0.3.1/_build/sub/doc/manuals/generated/_temp_osmosmlc-vty-reference.xml
a2x: args: ['-vv', '-L', "--asciidoc-opts=-f /opt/osmo-gsm-manuals/build/mscgen-filter.conf -f /opt/osmo-gsm-manuals/build/diag-filter.conf -f /opt/osmo-gsm-manuals/build/docinfo-releaseinfo.conf -f /opt/osmo-gsm-manuals/build/graphviz-filter.conf -a srcdir='/build/osmo-smlc-0.3.1/_build/sub/../../doc/manuals' -a commondir='/opt/osmo-gsm-manuals/common' ", '--dblatex-opts=--config /opt/osmo-gsm-manuals/build/dblatex_config.xml -s /opt/osmo-gsm-manuals/build/custom-dblatex.sty -P draft.mode=yes -P draft.watermark=0 ', '-a', 'docinfo', '-a', 'revnumber=DRAFT 0.3.1-dirty', '-a', 'revdate=2024-Sep-16', 'osmosmlc-usermanual.adoc']
a2x: resource files: []
a2x: resource directories: ['/etc/asciidoc/stylesheets']
a2x: executing: asciidoc ['-f', '/opt/osmo-gsm-manuals/build/mscgen-filter.conf', '-f', '/opt/osmo-gsm-manuals/build/diag-filter.conf', '-f', '/opt/osmo-gsm-manuals/build/docinfo-releaseinfo.conf', '-f', '/opt/osmo-gsm-manuals/build/graphviz-filter.conf', '-a', 'srcdir=/build/osmo-smlc-0.3.1/_build/sub/../../doc/manuals', '-a', 'commondir=/opt/osmo-gsm-manuals/common', ('--attribute', 'docinfo'), ('--attribute', 'revnumber=DRAFT 0.3.1-dirty'), ('--attribute', 'revdate=2024-Sep-16'), ('--verbose',), ('--backend', 'docbook'), ('-a', 'a2x-format=pdf'), ('--out-file', '/build/osmo-smlc-0.3.1/_build/sub/doc/manuals/osmosmlc-usermanual.xml')]
a2x: executing: "dblatex" -t pdf -p "/etc/asciidoc/dblatex/asciidoc-dblatex.xsl" -s "/etc/asciidoc/dblatex/asciidoc-dblatex.sty" --config /opt/osmo-gsm-manuals/build/dblatex_config.xml -s /opt/osmo-gsm-manuals/build/custom-dblatex.sty -P draft.mode=yes -P draft.watermark=0 -V "/build/osmo-smlc-0.3.1/_build/sub/doc/manuals/osmosmlc-usermanual.xml"
Build the book set list...
xsltproc -o doclist.txt --xinclude --xincludestyle doclist.xsl /build/osmo-smlc-0.3.1/_build/sub/doc/manuals/osmosmlc-usermanual.xml
Build the listings...
xsltproc -o listings.xml --xinclude --xincludestyle --param current.dir '/build/osmo-smlc-0.3.1/_build/sub/doc/manuals' /usr/share/dblatex/xsl/common/mklistings.xsl /build/osmo-smlc-0.3.1/_build/sub/doc/manuals/osmosmlc-usermanual.xml
xsltproc -o osmosmlc-usermanual.rtex --xinclude --xincludestyle --param listings.xml '/tmp/tmp528z2qrc/listings.xml' --param current.dir '/build/osmo-smlc-0.3.1/_build/sub/doc/manuals' /tmp/tmp528z2qrc/custom.xsl /build/osmo-smlc-0.3.1/_build/sub/doc/manuals/osmosmlc-usermanual.xml
XSLT stylesheets DocBook - LaTeX 2e (0.3.12)
===================================================
Error: no ID for constraint linkend: ieee-802.11.
XRef to nonexistent id: ieee-802.11
Section level > 6 not well supported for bibliodiv
Image 'dblatex' not found
Cannot convert './common/images/wireshark-gsmtap-log.png' to pdf
rsvg-convert -a -f pdf -o fig0.pdf /build/osmo-smlc-0.3.1/_build/sub/doc/manuals/osmosmlc-usermanual__1.svg
rsvg-convert -a -f pdf -o fig1.pdf /build/osmo-smlc-0.3.1/_build/sub/doc/manuals/osmosmlc-usermanual__2.svg
rsvg-convert -a -f pdf -o fig2.pdf /build/osmo-smlc-0.3.1/_build/sub/doc/manuals/osmosmlc-usermanual__3.svg
rsvg-convert -a -f pdf -o fig3.pdf /build/osmo-smlc-0.3.1/_build/sub/doc/manuals/osmosmlc-usermanual__4.svg
rsvg-convert -a -f pdf -o fig4.pdf /build/osmo-smlc-0.3.1/_build/sub/doc/manuals/osmosmlc-usermanual__5.svg
rsvg-convert -a -f pdf -o fig5.pdf /build/osmo-smlc-0.3.1/_build/sub/doc/manuals/osmosmlc-usermanual__6.svg
rsvg-convert -a -f pdf -o fig6.pdf /build/osmo-smlc-0.3.1/_build/sub/doc/manuals/osmosmlc-usermanual__7.svg
Build osmosmlc-usermanual.pdf
built-in module pdftex registered
no support found for ifthen
no support found for ifxetex
no support found for fontspec
no support found for xltxtra
no support found for fontenc
no support found for inputenc
no support found for fancybox
built-in module makeidx registered
no support found for custom-dblatex
built-in module bibtopic registered
building additional files...
checking if compiling is necessary...
the output file doesn't exist
pdflatex -interaction=batchmode osmosmlc-usermanual.tex
running post-compilation scripts...
[index] the index file /tmp/tmp528z2qrc/osmosmlc-usermanual.idx is empty
osmosmlc-usermanual.aux MD5 checksum changed
osmosmlc-usermanual.toc MD5 checksum changed
the /tmp/tmp528z2qrc/osmosmlc-usermanual.aux file has changed
pdflatex -interaction=batchmode osmosmlc-usermanual.tex
running post-compilation scripts...
[index] the index file /tmp/tmp528z2qrc/osmosmlc-usermanual.idx is empty
osmosmlc-usermanual.aux MD5 checksum changed
the /tmp/tmp528z2qrc/osmosmlc-usermanual.aux file has changed but no re-run required?
no new compilation is needed
running last-compilation scripts...
'osmosmlc-usermanual.pdf' successfully built
a2x: deleting /build/osmo-smlc-0.3.1/_build/sub/doc/manuals/osmosmlc-usermanual.xml
make[4]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/doc/manuals'
make[4]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/doc'
make[4]: Nothing to be done for 'all-am'.
make[4]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/doc'
make[3]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/doc'
Making all in contrib
make[3]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/contrib'
Making all in systemd
make[4]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/contrib/systemd'
make[4]: Nothing to be done for 'all'.
make[4]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/contrib/systemd'
make[4]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/contrib'
make[4]: Nothing to be done for 'all-am'.
make[4]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/contrib'
make[3]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/contrib'
make[3]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub'
make[3]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub'
make[2]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub'
make[1]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub'
make[1]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub'
Making dvi in include
make[2]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/include'
Making dvi in osmocom
make[3]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/include/osmocom'
Making dvi in smlc
make[4]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/include/osmocom/smlc'
make[4]: Nothing to be done for 'dvi'.
make[4]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/include/osmocom/smlc'
make[4]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/include/osmocom'
make[4]: Nothing to be done for 'dvi-am'.
make[4]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/include/osmocom'
make[3]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/include/osmocom'
make[3]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/include'
make[3]: Nothing to be done for 'dvi-am'.
make[3]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/include'
make[2]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/include'
Making dvi in src
make[2]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/src'
Making dvi in osmo-smlc
make[3]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/src/osmo-smlc'
make[3]: Nothing to be done for 'dvi'.
make[3]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/src/osmo-smlc'
make[3]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/src'
make[3]: Nothing to be done for 'dvi-am'.
make[3]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/src'
make[2]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/src'
Making dvi in tests
make[2]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/tests'
Making dvi in smlc_subscr
make[3]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/tests/smlc_subscr'
make[3]: Nothing to be done for 'dvi'.
make[3]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/tests/smlc_subscr'
make[3]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/tests'
make[3]: Nothing to be done for 'dvi-am'.
make[3]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/tests'
make[2]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/tests'
Making dvi in doc
make[2]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/doc'
Making dvi in examples
make[3]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/doc/examples'
make[3]: Nothing to be done for 'dvi'.
make[3]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/doc/examples'
Making dvi in manuals
make[3]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/doc/manuals'
make[3]: Nothing to be done for 'dvi'.
make[3]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/doc/manuals'
make[3]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/doc'
make[3]: Nothing to be done for 'dvi-am'.
make[3]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/doc'
make[2]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/doc'
Making dvi in contrib
make[2]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/contrib'
Making dvi in systemd
make[3]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/contrib/systemd'
make[3]: Nothing to be done for 'dvi'.
make[3]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/contrib/systemd'
make[3]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/contrib'
make[3]: Nothing to be done for 'dvi-am'.
make[3]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/contrib'
make[2]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/contrib'
make[2]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub'
make[2]: Nothing to be done for 'dvi-am'.
make[2]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub'
make[1]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub'
make[1]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub'
make check-recursive
make[2]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub'
Making check in include
make[3]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/include'
Making check in osmocom
make[4]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/include/osmocom'
Making check in smlc
make[5]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/include/osmocom/smlc'
make[5]: Nothing to be done for 'check'.
make[5]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/include/osmocom/smlc'
make[5]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/include/osmocom'
make[5]: Nothing to be done for 'check-am'.
make[5]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/include/osmocom'
make[4]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/include/osmocom'
make[4]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/include'
make[4]: Nothing to be done for 'check-am'.
make[4]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/include'
make[3]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/include'
Making check in src
make[3]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/src'
Making check in osmo-smlc
make[4]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/src/osmo-smlc'
make[4]: Nothing to be done for 'check'.
make[4]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/src/osmo-smlc'
make[4]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/src'
make[4]: Nothing to be done for 'check-am'.
make[4]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/src'
make[3]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/src'
Making check in tests
make[3]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/tests'
Making check in smlc_subscr
make[4]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/tests/smlc_subscr'
make smlc_subscr_test
make[5]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/tests/smlc_subscr'
CC smlc_subscr_test.o
CCLD smlc_subscr_test
make[5]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/tests/smlc_subscr'
make[4]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/tests/smlc_subscr'
make[4]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/tests'
make check-local
make[5]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/tests'
/bin/bash '../../../tests/testsuite'
## --------------------------- ##
## osmo-smlc 0.3.1 test suite. ##
## --------------------------- ##
1: smlc_subscr ok
## ------------- ##
## Test results. ##
## ------------- ##
1 test was successful.
make python-tests
make[6]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/tests'
make vty-test
make[7]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/tests'
osmo_verify_transcript_vty.py -v \
-n OsmoSMLC -p 4271 \
-r "../src/osmo-smlc/osmo-smlc -c ../../../tests/osmo-smlc.cfg" \
../../../tests/*.vty
<0004> telnet_interface.c:88 Available via telnet 127.0.0.1 4271
[38;5;33m<000b> control_if.c:1024 CTRL at 127.0.0.1 4272[0;m
[38;5;45m<0011> sccp_user.c:545 Lb: Creating SS7 instance[0;m
[38;5;45m<0011> sccp_user.c:572 Lb: Using SS7 instance 0, pc:0.23.6[0;m
[38;5;45m<0011> sccp_user.c:579 Lb: Creating AS instance[0;m
[38;5;45m<0011> sccp_user.c:590 Lb: Using AS instance as-clnt-Lb[0;m
[38;5;45m<0011> sccp_user.c:596 Lb: Creating default route[0;m
[38;5;45m<0011> sccp_user.c:635 Lb: No unassociated ASP for m3ua, creating new ASP asp-clnt-Lb[0;m
[38;5;45m<0011> sccp_user.c:705 Lb: Using ASP instance asp-clnt-Lb[0;m
[38;5;43m<0010> osmo_ss7_instance.c:158 0: Creating SCCP instance[0;m
Launching: cd '/build/osmo-smlc-0.3.1/_build/sub/tests'; ../src/osmo-smlc/osmo-smlc -c ../../../tests/osmo-smlc.cfg
OsmoSMLC> enable
OsmoSMLC# show cells
% No cell locations are configured
OsmoSMLC# configure terminal
OsmoSMLC(config)# cells?
cells Configure cell locations
OsmoSMLC(config)# cells
OsmoSMLC(config-cells)# list
help
list [with-flags]
show vty-attributes
show vty-attributes (application|library|global)
write terminal
write file [PATH]
write memory
write
show running-config
exit
end
lac-ci <0-65535> <0-65535> lat LATITUDE lon LONGITUDE
no lac-ci <0-65535> <0-65535>
cgi <0-999> <0-999> <0-65535> <0-65535> lat LATITUDE lon LONGITUDE
no cgi <0-999> <0-999> <0-65535> <0-65535>
OsmoSMLC(config-cells)# lac-ci?
lac-ci Cell location by LAC and CI
OsmoSMLC(config-cells)# lac-ci ?
<0-65535> LAC
OsmoSMLC(config-cells)# lac-ci 23 ?
<0-65535> CI
OsmoSMLC(config-cells)# lac-ci 23 42 ?
lat Global latitute coordinate
OsmoSMLC(config-cells)# lac-ci 23 42 lat ?
LATITUDE Latitude floating-point number, -90.0 (S) to 90.0 (N)
OsmoSMLC(config-cells)# lac-ci 23 42 lat 23.23 ?
lon Global longitude coordinate
OsmoSMLC(config-cells)# lac-ci 23 42 lat 23.23 lon ?
LONGITUDE Longitude as floating-point number, -180.0 (W) to 180.0 (E)
OsmoSMLC(config-cells)# lac-ci 23 42 lat 23.23 lon 42.42 ?
<cr>
OsmoSMLC(config-cells)# cgi?
cgi Cell location by Cell-Global ID
OsmoSMLC(config-cells)# cgi ?
<0-999> MCC
OsmoSMLC(config-cells)# cgi 001 ?
<0-999> MNC
OsmoSMLC(config-cells)# cgi 001 02 ?
<0-65535> LAC
OsmoSMLC(config-cells)# cgi 001 02 3 ?
<0-65535> CI
OsmoSMLC(config-cells)# cgi 001 02 3 4 ?
lat Global latitute coordinate
OsmoSMLC(config-cells)# cgi 001 02 3 4 lat ?
LATITUDE Latitude floating-point number, -90.0 (S) to 90.0 (N)
OsmoSMLC(config-cells)# cgi 001 02 3 4 lat 1.1 ?
lon Global longitude coordinate
OsmoSMLC(config-cells)# cgi 001 02 3 4 lat 1.1 lon ?
LONGITUDE Longitude as floating-point number, -180.0 (W) to 180.0 (E)
OsmoSMLC(config-cells)# cgi 001 02 3 4 lat 1.1 lon 2.2 ?
<cr>
OsmoSMLC(config-cells)# lac-ci 23 42 lat 23.23 lon 42.42
OsmoSMLC(config-cells)# cgi 001 02 3 4 lat 1.1 lon 2.2
OsmoSMLC(config-cells)# do show cells
cells
lac-ci 23 42 lat 23.23 lon 42.42
cgi 001 02 3 4 lat 1.1 lon 2.2
OsmoSMLC(config-cells)# show running-config
Current configuration:
!
!
log stderr blocking-io
logging filter all 1
logging color 1
logging print category-hex 1
logging print category 0
logging print thread-id 0
logging timestamp 0
logging print file 1
logging level smlc notice
logging level ref notice
logging level lb notice
logging level lcs notice
logging level lglobal notice
logging level llapd notice
logging level linp notice
logging level lmux notice
logging level lmi notice
logging level lmib notice
logging level lsms notice
logging level lctrl notice
logging level lgtp notice
logging level lstats notice
logging level lgsup notice
logging level loap notice
logging level lss7 notice
logging level lsccp notice
logging level lsua notice
logging level lm3ua notice
logging level lmgcp notice
logging level ljibuf notice
logging level lrspro notice
logging level lns notice
logging level lbssgp notice
logging level lnsdata notice
logging level lnssignal notice
logging level liuup notice
logging level lpfcp notice
logging level lcsn1 notice
logging level lio notice
!
line vty
no login
!
cs7 instance 0
point-code 0.23.6
cells
lac-ci 23 42 lat 23.23 lon 42.42
cgi 001 02 3 4 lat 1.1 lon 2.2
end
OsmoSMLC(config-cells)# no lac-ci 99 99
% cannot remove, no such entry
OsmoSMLC(config-cells)# no cgi 009 08 7 6
% cannot remove, no such entry
OsmoSMLC(config-cells)# do show cells
cells
lac-ci 23 42 lat 23.23 lon 42.42
cgi 001 02 3 4 lat 1.1 lon 2.2
OsmoSMLC(config-cells)# lac-ci 23 42 lat 17.17 lon 18.18
OsmoSMLC(config-cells)# do show cells
cells
lac-ci 23 42 lat 17.17 lon 18.18
cgi 001 02 3 4 lat 1.1 lon 2.2
OsmoSMLC(config-cells)# no lac-ci 23 42
OsmoSMLC(config-cells)# no cgi 001 02 3 4
OsmoSMLC(config-cells)# do show cells
% No cell locations are configured
signal 15 received
<0004> telnet_interface.c:88 Available via telnet 127.0.0.1 4271
[38;5;33m<000b> control_if.c:1024 CTRL at 127.0.0.1 4272[0;m
[38;5;45m<0011> sccp_user.c:545 Lb: Creating SS7 instance[0;m
[38;5;45m<0011> sccp_user.c:572 Lb: Using SS7 instance 0, pc:0.23.6[0;m
[38;5;45m<0011> sccp_user.c:579 Lb: Creating AS instance[0;m
[38;5;45m<0011> sccp_user.c:590 Lb: Using AS instance as-clnt-Lb[0;m
[38;5;45m<0011> sccp_user.c:596 Lb: Creating default route[0;m
[38;5;45m<0011> sccp_user.c:635 Lb: No unassociated ASP for m3ua, creating new ASP asp-clnt-Lb[0;m
[38;5;45m<0011> sccp_user.c:705 Lb: Using ASP instance asp-clnt-Lb[0;m
[38;5;43m<0010> osmo_ss7_instance.c:158 0: Creating SCCP instance[0;m
Launching: cd '/build/osmo-smlc-0.3.1/_build/sub/tests'; ../src/osmo-smlc/osmo-smlc -c ../../../tests/osmo-smlc.cfg
OsmoSMLC> enable
OsmoSMLC# configure terminal
signal 15 received
RESULTS:
pass: ../../../tests/cell_locations.vty
pass: ../../../tests/test_nodes.vty
make[7]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/tests'
make ctrl-test
make[7]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/tests'
osmo_verify_transcript_ctrl.py -v \
-p 4272 \
-r "../src/osmo-smlc/osmo-smlc -c ../../../tests/osmo-smlc.cfg" \
../../../tests/*.ctrl
<0004> telnet_interface.c:88 Available via telnet 127.0.0.1 4271
[38;5;33m<000b> control_if.c:1024 CTRL at 127.0.0.1 4272[0;m
[38;5;45m<0011> sccp_user.c:545 Lb: Creating SS7 instance[0;m
[38;5;45m<0011> sccp_user.c:572 Lb: Using SS7 instance 0, pc:0.23.6[0;m
[38;5;45m<0011> sccp_user.c:579 Lb: Creating AS instance[0;m
[38;5;45m<0011> sccp_user.c:590 Lb: Using AS instance as-clnt-Lb[0;m
[38;5;45m<0011> sccp_user.c:596 Lb: Creating default route[0;m
[38;5;45m<0011> sccp_user.c:635 Lb: No unassociated ASP for m3ua, creating new ASP asp-clnt-Lb[0;m
[38;5;45m<0011> sccp_user.c:705 Lb: Using ASP instance asp-clnt-Lb[0;m
[38;5;43m<0010> osmo_ss7_instance.c:158 0: Creating SCCP instance[0;m
signal 15 received
Launching: cd '/build/osmo-smlc-0.3.1/_build/sub/tests'; ../src/osmo-smlc/osmo-smlc -c ../../../tests/osmo-smlc.cfg
RESULTS:
pass: ../../../tests/test_nodes.ctrl
make[7]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/tests'
osmotestvty.py -p /build/osmo-smlc-0.3.1/_build/sub/../.. -w /build/osmo-smlc-0.3.1/_build/sub -v
test_history (__main__.TestVTY.test_history) ... confpath /build/osmo-smlc-0.3.1/_build/sub/../.., workdir /build/osmo-smlc-0.3.1/_build/sub
Running tests for specific VTY commands
Launch: ./src/osmo-smlc/osmo-smlc -c /build/osmo-smlc-0.3.1/_build/sub/../../doc/examples/osmo-smlc/osmo-smlc.cfg from /build/osmo-smlc-0.3.1/_build/sub
Opening /dev/null
Launching: PWD=/build/osmo-smlc-0.3.1/_build/sub './src/osmo-smlc/osmo-smlc' '-c' '/build/osmo-smlc-0.3.1/_build/sub/../../doc/examples/osmo-smlc/osmo-smlc.cfg'
> ls -l /proc/47347/fd
total 0
lr-x------ 1 build build 64 Nov 18 12:04 0 -> pipe:[2202447795]
l-wx------ 1 build build 64 Nov 18 12:04 1 -> pipe:[2202447796]
l-wx------ 1 build build 64 Nov 18 12:04 2 -> pipe:[2202447797]
l-wx------ 1 build build 64 Nov 18 12:04 3 -> /dev/null
> ss -tn
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
> ss -tln
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
LISTEN 0 10 127.0.0.1:4272 0.0.0.0:*
LISTEN 0 10 127.0.0.1:4271 0.0.0.0:*
> ps xua | grep osmo
build 44619 0.0 0.0 3924 3076 ? S 12:04 0:00 /bin/bash -c test -d osmo-smlc-0.3.1/_build || exit 0; \ dc_install_base=`CDPATH="${ZSH_VERSION+.}:" && cd osmo-smlc-0.3.1/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ && dc_destdir="${TMPDIR-/tmp}/am-dc-$$/" \ && am__cwd=`pwd` \ && CDPATH="${ZSH_VERSION+.}:" && cd osmo-smlc-0.3.1/_build/sub \ && ../../configure \ --with-systemdsystemunitdir=$dc_install_base//lib/systemd/system \ --enable-vty-tests --enable-external-tests --enable-werror --enable-manuals \ --srcdir=../.. --prefix="$dc_install_base" \ && make \ && make dvi \ && make check \ && make install \ && make installcheck \ && make uninstall \ && make distuninstallcheck_dir="$dc_install_base" \ distuninstallcheck \ && chmod -R a-w "$dc_install_base" \ && ({ \ (cd ../.. && umask 077 && mkdir "$dc_destdir") \ && make DESTDIR="$dc_destdir" install \ && make DESTDIR="$dc_destdir" uninstall \ && make DESTDIR="$dc_destdir" \ distuninstallcheck_dir="$dc_destdir" distuninstallcheck; \ } || { rm -rf "$dc_destdir"; exit 1; }) \ && rm -rf "$dc_destdir" \ && make dist \ && rm -rf osmo-smlc-0.3.1.tar.gz osmo-smlc-0.3.1.tar.bz2 \ && make distcleancheck \ && cd "$am__cwd" \ || exit 1
build 46999 0.0 0.0 3924 3028 ? S 12:04 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '2'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-smlc-0.3.1/_build/sub'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='include src tests doc contrib ' ;; \ *) list='include src tests doc contrib ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail"
build 47028 0.0 0.0 3924 3112 ? S 12:04 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '3'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-smlc-0.3.1/_build/sub/tests'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='smlc_subscr ' ;; \ *) list='smlc_subscr ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail"
build 47347 55.5 0.0 27860 23088 ? S 12:04 0:00 /usr/bin/python3 /usr/local/bin/osmotestvty.py -p /build/osmo-smlc-0.3.1/_build/sub/../.. -w /build/osmo-smlc-0.3.1/_build/sub -v
build 47348 0.0 0.0 13124 6992 ? S 12:04 0:00 ./src/osmo-smlc/osmo-smlc -c /build/osmo-smlc-0.3.1/_build/sub/../../doc/examples/osmo-smlc/osmo-smlc.cfg
build 47355 0.0 0.0 2576 916 ? S 12:04 0:00 /bin/sh -c ps xua | grep osmo
build 47357 0.0 0.0 3700 1888 ? S 12:04 0:00 grep osmo
ok
test_terminal_length (__main__.TestVTY.test_terminal_length) ... Socket: in 1 tries, connected to 127.0.0.1:4271 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 54464), raddr=('127.0.0.1', 4271)> (1 sockets open)
Socket: closing 127.0.0.1:4271 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 54464), raddr=('127.0.0.1', 4271)> (0 sockets open)
Process returned code: 0
Launch: ./src/osmo-smlc/osmo-smlc -c /build/osmo-smlc-0.3.1/_build/sub/../../doc/examples/osmo-smlc/osmo-smlc.cfg from /build/osmo-smlc-0.3.1/_build/sub
Launching: PWD=/build/osmo-smlc-0.3.1/_build/sub './src/osmo-smlc/osmo-smlc' '-c' '/build/osmo-smlc-0.3.1/_build/sub/../../doc/examples/osmo-smlc/osmo-smlc.cfg'
> ls -l /proc/47347/fd
total 0
lr-x------ 1 build build 64 Nov 18 12:04 0 -> pipe:[2202447795]
l-wx------ 1 build build 64 Nov 18 12:04 1 -> pipe:[2202447796]
l-wx------ 1 build build 64 Nov 18 12:04 2 -> pipe:[2202447797]
l-wx------ 1 build build 64 Nov 18 12:04 3 -> /dev/null
> ss -tn
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
> ss -tln
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
LISTEN 0 10 127.0.0.1:4272 0.0.0.0:*
LISTEN 0 10 127.0.0.1:4271 0.0.0.0:*
> ps xua | grep osmo
build 44619 0.0 0.0 3924 3076 ? S 12:04 0:00 /bin/bash -c test -d osmo-smlc-0.3.1/_build || exit 0; \ dc_install_base=`CDPATH="${ZSH_VERSION+.}:" && cd osmo-smlc-0.3.1/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ && dc_destdir="${TMPDIR-/tmp}/am-dc-$$/" \ && am__cwd=`pwd` \ && CDPATH="${ZSH_VERSION+.}:" && cd osmo-smlc-0.3.1/_build/sub \ && ../../configure \ --with-systemdsystemunitdir=$dc_install_base//lib/systemd/system \ --enable-vty-tests --enable-external-tests --enable-werror --enable-manuals \ --srcdir=../.. --prefix="$dc_install_base" \ && make \ && make dvi \ && make check \ && make install \ && make installcheck \ && make uninstall \ && make distuninstallcheck_dir="$dc_install_base" \ distuninstallcheck \ && chmod -R a-w "$dc_install_base" \ && ({ \ (cd ../.. && umask 077 && mkdir "$dc_destdir") \ && make DESTDIR="$dc_destdir" install \ && make DESTDIR="$dc_destdir" uninstall \ && make DESTDIR="$dc_destdir" \ distuninstallcheck_dir="$dc_destdir" distuninstallcheck; \ } || { rm -rf "$dc_destdir"; exit 1; }) \ && rm -rf "$dc_destdir" \ && make dist \ && rm -rf osmo-smlc-0.3.1.tar.gz osmo-smlc-0.3.1.tar.bz2 \ && make distcleancheck \ && cd "$am__cwd" \ || exit 1
build 46999 0.0 0.0 3924 3028 ? S 12:04 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '2'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-smlc-0.3.1/_build/sub'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='include src tests doc contrib ' ;; \ *) list='include src tests doc contrib ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail"
build 47028 0.0 0.0 3924 3112 ? S 12:04 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '3'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-smlc-0.3.1/_build/sub/tests'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='smlc_subscr ' ;; \ *) list='smlc_subscr ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail"
build 47347 15.6 0.0 27860 23088 ? S 12:04 0:00 /usr/bin/python3 /usr/local/bin/osmotestvty.py -p /build/osmo-smlc-0.3.1/_build/sub/../.. -w /build/osmo-smlc-0.3.1/_build/sub -v
build 47358 0.0 0.0 13124 6912 ? S 12:04 0:00 ./src/osmo-smlc/osmo-smlc -c /build/osmo-smlc-0.3.1/_build/sub/../../doc/examples/osmo-smlc/osmo-smlc.cfg
build 47365 0.0 0.0 2576 880 ? S 12:04 0:00 /bin/sh -c ps xua | grep osmo
build 47367 0.0 0.0 3700 1820 ? S 12:04 0:00 grep osmo
ok
test_unknown_command (__main__.TestVTY.test_unknown_command) ... Socket: in 1 tries, connected to 127.0.0.1:4271 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 45954), raddr=('127.0.0.1', 4271)> (1 sockets open)
Socket: closing 127.0.0.1:4271 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 45954), raddr=('127.0.0.1', 4271)> (0 sockets open)
Process returned code: 0
Launch: ./src/osmo-smlc/osmo-smlc -c /build/osmo-smlc-0.3.1/_build/sub/../../doc/examples/osmo-smlc/osmo-smlc.cfg from /build/osmo-smlc-0.3.1/_build/sub
Launching: PWD=/build/osmo-smlc-0.3.1/_build/sub './src/osmo-smlc/osmo-smlc' '-c' '/build/osmo-smlc-0.3.1/_build/sub/../../doc/examples/osmo-smlc/osmo-smlc.cfg'
> ls -l /proc/47347/fd
total 0
lr-x------ 1 build build 64 Nov 18 12:04 0 -> pipe:[2202447795]
l-wx------ 1 build build 64 Nov 18 12:04 1 -> pipe:[2202447796]
l-wx------ 1 build build 64 Nov 18 12:04 2 -> pipe:[2202447797]
l-wx------ 1 build build 64 Nov 18 12:04 3 -> /dev/null
> ss -tn
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
> ss -tln
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
LISTEN 0 10 127.0.0.1:4272 0.0.0.0:*
LISTEN 0 10 127.0.0.1:4271 0.0.0.0:*
> ps xua | grep osmo
build 44619 0.0 0.0 3924 3076 ? S 12:04 0:00 /bin/bash -c test -d osmo-smlc-0.3.1/_build || exit 0; \ dc_install_base=`CDPATH="${ZSH_VERSION+.}:" && cd osmo-smlc-0.3.1/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ && dc_destdir="${TMPDIR-/tmp}/am-dc-$$/" \ && am__cwd=`pwd` \ && CDPATH="${ZSH_VERSION+.}:" && cd osmo-smlc-0.3.1/_build/sub \ && ../../configure \ --with-systemdsystemunitdir=$dc_install_base//lib/systemd/system \ --enable-vty-tests --enable-external-tests --enable-werror --enable-manuals \ --srcdir=../.. --prefix="$dc_install_base" \ && make \ && make dvi \ && make check \ && make install \ && make installcheck \ && make uninstall \ && make distuninstallcheck_dir="$dc_install_base" \ distuninstallcheck \ && chmod -R a-w "$dc_install_base" \ && ({ \ (cd ../.. && umask 077 && mkdir "$dc_destdir") \ && make DESTDIR="$dc_destdir" install \ && make DESTDIR="$dc_destdir" uninstall \ && make DESTDIR="$dc_destdir" \ distuninstallcheck_dir="$dc_destdir" distuninstallcheck; \ } || { rm -rf "$dc_destdir"; exit 1; }) \ && rm -rf "$dc_destdir" \ && make dist \ && rm -rf osmo-smlc-0.3.1.tar.gz osmo-smlc-0.3.1.tar.bz2 \ && make distcleancheck \ && cd "$am__cwd" \ || exit 1
build 46999 0.0 0.0 3924 3028 ? S 12:04 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '2'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-smlc-0.3.1/_build/sub'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='include src tests doc contrib ' ;; \ *) list='include src tests doc contrib ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail"
build 47028 0.0 0.0 3924 3112 ? S 12:04 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '3'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-smlc-0.3.1/_build/sub/tests'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='smlc_subscr ' ;; \ *) list='smlc_subscr ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail"
build 47347 11.5 0.0 27860 23088 ? S 12:04 0:00 /usr/bin/python3 /usr/local/bin/osmotestvty.py -p /build/osmo-smlc-0.3.1/_build/sub/../.. -w /build/osmo-smlc-0.3.1/_build/sub -v
build 47368 0.0 0.0 13124 6904 ? S 12:04 0:00 ./src/osmo-smlc/osmo-smlc -c /build/osmo-smlc-0.3.1/_build/sub/../../doc/examples/osmo-smlc/osmo-smlc.cfg
build 47375 0.0 0.0 2576 908 ? S 12:04 0:00 /bin/sh -c ps xua | grep osmo
build 47377 0.0 0.0 3700 1968 ? S 12:04 0:00 grep osmo
ok
----------------------------------------------------------------------
Ran 3 tests in 0.633s
OK
Socket: in 1 tries, connected to 127.0.0.1:4271 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 45968), raddr=('127.0.0.1', 4271)> (1 sockets open)
Socket: closing 127.0.0.1:4271 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 45968), raddr=('127.0.0.1', 4271)> (0 sockets open)
Process returned code: 0
osmotestconfig.py -p /build/osmo-smlc-0.3.1/_build/sub/../.. -w /build/osmo-smlc-0.3.1/_build/sub -v
Verifying src/osmo-smlc/osmo-smlc -c /build/osmo-smlc-0.3.1/_build/sub/../../doc/examples/osmo-smlc/osmo-smlc.cfg, test verify_doc
Opening /dev/null
Launching: PWD=/build/osmo-smlc-0.3.1/_build/sub 'src/osmo-smlc/osmo-smlc' '-c' '/build/osmo-smlc-0.3.1/_build/sub/../../doc/examples/osmo-smlc/osmo-smlc.cfg'
> ls -l /proc/47378/fd
total 0
lr-x------ 1 build build 64 Nov 18 12:04 0 -> pipe:[2202447795]
l-wx------ 1 build build 64 Nov 18 12:04 1 -> pipe:[2202447796]
l-wx------ 1 build build 64 Nov 18 12:04 2 -> pipe:[2202447797]
l-wx------ 1 build build 64 Nov 18 12:04 3 -> /dev/null
> ss -tn
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
> ss -tln
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
LISTEN 0 10 127.0.0.1:4272 0.0.0.0:*
LISTEN 0 10 127.0.0.1:4271 0.0.0.0:*
> ps xua | grep osmo
build 44619 0.0 0.0 3924 3076 ? S 12:04 0:00 /bin/bash -c test -d osmo-smlc-0.3.1/_build || exit 0; \ dc_install_base=`CDPATH="${ZSH_VERSION+.}:" && cd osmo-smlc-0.3.1/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ && dc_destdir="${TMPDIR-/tmp}/am-dc-$$/" \ && am__cwd=`pwd` \ && CDPATH="${ZSH_VERSION+.}:" && cd osmo-smlc-0.3.1/_build/sub \ && ../../configure \ --with-systemdsystemunitdir=$dc_install_base//lib/systemd/system \ --enable-vty-tests --enable-external-tests --enable-werror --enable-manuals \ --srcdir=../.. --prefix="$dc_install_base" \ && make \ && make dvi \ && make check \ && make install \ && make installcheck \ && make uninstall \ && make distuninstallcheck_dir="$dc_install_base" \ distuninstallcheck \ && chmod -R a-w "$dc_install_base" \ && ({ \ (cd ../.. && umask 077 && mkdir "$dc_destdir") \ && make DESTDIR="$dc_destdir" install \ && make DESTDIR="$dc_destdir" uninstall \ && make DESTDIR="$dc_destdir" \ distuninstallcheck_dir="$dc_destdir" distuninstallcheck; \ } || { rm -rf "$dc_destdir"; exit 1; }) \ && rm -rf "$dc_destdir" \ && make dist \ && rm -rf osmo-smlc-0.3.1.tar.gz osmo-smlc-0.3.1.tar.bz2 \ && make distcleancheck \ && cd "$am__cwd" \ || exit 1
build 46999 0.0 0.0 3924 3028 ? S 12:04 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '2'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-smlc-0.3.1/_build/sub'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='include src tests doc contrib ' ;; \ *) list='include src tests doc contrib ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail"
build 47028 0.0 0.0 3924 3112 ? S 12:04 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '3'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-smlc-0.3.1/_build/sub/tests'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='smlc_subscr ' ;; \ *) list='smlc_subscr ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail"
build 47378 45.4 0.0 27988 23288 ? S 12:04 0:00 /usr/bin/python3 /usr/local/bin/osmotestconfig.py -p /build/osmo-smlc-0.3.1/_build/sub/../.. -w /build/osmo-smlc-0.3.1/_build/sub -v
build 47379 0.0 0.0 13124 6988 ? S 12:04 0:00 src/osmo-smlc/osmo-smlc -c /build/osmo-smlc-0.3.1/_build/sub/../../doc/examples/osmo-smlc/osmo-smlc.cfg
build 47386 0.0 0.0 2576 912 ? S 12:04 0:00 /bin/sh -c ps xua | grep osmo
build 47388 0.0 0.0 3700 1880 ? S 12:04 0:00 grep osmo
Socket: in 1 tries, connected to 127.0.0.1:4271 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 45974), raddr=('127.0.0.1', 4271)> (1 sockets open)
Process returned code: 0
Socket: closing 127.0.0.1:4271 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 45974), raddr=('127.0.0.1', 4271)> (0 sockets open)
Verifying src/osmo-smlc/osmo-smlc -c /build/osmo-smlc-0.3.1/_build/sub/writtenconfig/osmo-smlc.cfg0wzdlqn0, test write_config
Launching: PWD=/build/osmo-smlc-0.3.1/_build/sub 'src/osmo-smlc/osmo-smlc' '-c' '/build/osmo-smlc-0.3.1/_build/sub/writtenconfig/osmo-smlc.cfg0wzdlqn0'
> ls -l /proc/47378/fd
total 0
lr-x------ 1 build build 64 Nov 18 12:04 0 -> pipe:[2202447795]
l-wx------ 1 build build 64 Nov 18 12:04 1 -> pipe:[2202447796]
l-wx------ 1 build build 64 Nov 18 12:04 2 -> pipe:[2202447797]
l-wx------ 1 build build 64 Nov 18 12:04 3 -> /dev/null
> ss -tn
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
> ss -tln
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
LISTEN 0 10 127.0.0.1:4272 0.0.0.0:*
LISTEN 0 10 127.0.0.1:4271 0.0.0.0:*
> ps xua | grep osmo
build 44619 0.0 0.0 3924 3076 ? S 12:04 0:00 /bin/bash -c test -d osmo-smlc-0.3.1/_build || exit 0; \ dc_install_base=`CDPATH="${ZSH_VERSION+.}:" && cd osmo-smlc-0.3.1/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ && dc_destdir="${TMPDIR-/tmp}/am-dc-$$/" \ && am__cwd=`pwd` \ && CDPATH="${ZSH_VERSION+.}:" && cd osmo-smlc-0.3.1/_build/sub \ && ../../configure \ --with-systemdsystemunitdir=$dc_install_base//lib/systemd/system \ --enable-vty-tests --enable-external-tests --enable-werror --enable-manuals \ --srcdir=../.. --prefix="$dc_install_base" \ && make \ && make dvi \ && make check \ && make install \ && make installcheck \ && make uninstall \ && make distuninstallcheck_dir="$dc_install_base" \ distuninstallcheck \ && chmod -R a-w "$dc_install_base" \ && ({ \ (cd ../.. && umask 077 && mkdir "$dc_destdir") \ && make DESTDIR="$dc_destdir" install \ && make DESTDIR="$dc_destdir" uninstall \ && make DESTDIR="$dc_destdir" \ distuninstallcheck_dir="$dc_destdir" distuninstallcheck; \ } || { rm -rf "$dc_destdir"; exit 1; }) \ && rm -rf "$dc_destdir" \ && make dist \ && rm -rf osmo-smlc-0.3.1.tar.gz osmo-smlc-0.3.1.tar.bz2 \ && make distcleancheck \ && cd "$am__cwd" \ || exit 1
build 46999 0.0 0.0 3924 3028 ? S 12:04 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '2'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-smlc-0.3.1/_build/sub'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='include src tests doc contrib ' ;; \ *) list='include src tests doc contrib ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail"
build 47028 0.0 0.0 3924 3112 ? S 12:04 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '3'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-smlc-0.3.1/_build/sub/tests'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='smlc_subscr ' ;; \ *) list='smlc_subscr ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail"
build 47378 19.3 0.0 28152 23672 ? S 12:04 0:00 /usr/bin/python3 /usr/local/bin/osmotestconfig.py -p /build/osmo-smlc-0.3.1/_build/sub/../.. -w /build/osmo-smlc-0.3.1/_build/sub -v
build 47389 0.0 0.0 13124 6932 ? S 12:04 0:00 src/osmo-smlc/osmo-smlc -c /build/osmo-smlc-0.3.1/_build/sub/writtenconfig/osmo-smlc.cfg0wzdlqn0
build 47396 0.0 0.0 2576 896 ? S 12:04 0:00 /bin/sh -c ps xua | grep osmo
build 47398 0.0 0.0 3700 1788 ? S 12:04 0:00 grep osmo
Socket: in 1 tries, connected to 127.0.0.1:4271 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 45976), raddr=('127.0.0.1', 4271)> (1 sockets open)
Process returned code: 0
Socket: closing 127.0.0.1:4271 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 45976), raddr=('127.0.0.1', 4271)> (0 sockets open)
Verifying src/osmo-smlc/osmo-smlc -c /build/osmo-smlc-0.3.1/_build/sub/writtenconfig/osmo-smlc.cfg0wzdlqn0, test token_vty_command
Launching: PWD=/build/osmo-smlc-0.3.1/_build/sub 'src/osmo-smlc/osmo-smlc' '-c' '/build/osmo-smlc-0.3.1/_build/sub/writtenconfig/osmo-smlc.cfg0wzdlqn0'
> ls -l /proc/47378/fd
total 0
lr-x------ 1 build build 64 Nov 18 12:04 0 -> pipe:[2202447795]
l-wx------ 1 build build 64 Nov 18 12:04 1 -> pipe:[2202447796]
l-wx------ 1 build build 64 Nov 18 12:04 2 -> pipe:[2202447797]
l-wx------ 1 build build 64 Nov 18 12:04 3 -> /dev/null
> ss -tn
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
> ss -tln
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
LISTEN 0 10 127.0.0.1:4272 0.0.0.0:*
LISTEN 0 10 127.0.0.1:4271 0.0.0.0:*
> ps xua | grep osmo
build 44619 0.0 0.0 3924 3076 ? S 12:04 0:00 /bin/bash -c test -d osmo-smlc-0.3.1/_build || exit 0; \ dc_install_base=`CDPATH="${ZSH_VERSION+.}:" && cd osmo-smlc-0.3.1/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ && dc_destdir="${TMPDIR-/tmp}/am-dc-$$/" \ && am__cwd=`pwd` \ && CDPATH="${ZSH_VERSION+.}:" && cd osmo-smlc-0.3.1/_build/sub \ && ../../configure \ --with-systemdsystemunitdir=$dc_install_base//lib/systemd/system \ --enable-vty-tests --enable-external-tests --enable-werror --enable-manuals \ --srcdir=../.. --prefix="$dc_install_base" \ && make \ && make dvi \ && make check \ && make install \ && make installcheck \ && make uninstall \ && make distuninstallcheck_dir="$dc_install_base" \ distuninstallcheck \ && chmod -R a-w "$dc_install_base" \ && ({ \ (cd ../.. && umask 077 && mkdir "$dc_destdir") \ && make DESTDIR="$dc_destdir" install \ && make DESTDIR="$dc_destdir" uninstall \ && make DESTDIR="$dc_destdir" \ distuninstallcheck_dir="$dc_destdir" distuninstallcheck; \ } || { rm -rf "$dc_destdir"; exit 1; }) \ && rm -rf "$dc_destdir" \ && make dist \ && rm -rf osmo-smlc-0.3.1.tar.gz osmo-smlc-0.3.1.tar.bz2 \ && make distcleancheck \ && cd "$am__cwd" \ || exit 1
build 46999 0.0 0.0 3924 3028 ? S 12:04 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '2'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-smlc-0.3.1/_build/sub'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='include src tests doc contrib ' ;; \ *) list='include src tests doc contrib ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail"
build 47028 0.0 0.0 3924 3112 ? S 12:04 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '3'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-smlc-0.3.1/_build/sub/tests'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='smlc_subscr ' ;; \ *) list='smlc_subscr ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail"
build 47378 11.3 0.0 28152 23672 ? S 12:04 0:00 /usr/bin/python3 /usr/local/bin/osmotestconfig.py -p /build/osmo-smlc-0.3.1/_build/sub/../.. -w /build/osmo-smlc-0.3.1/_build/sub -v
build 47399 0.0 0.0 13124 6872 ? S 12:04 0:00 src/osmo-smlc/osmo-smlc -c /build/osmo-smlc-0.3.1/_build/sub/writtenconfig/osmo-smlc.cfg0wzdlqn0
build 47406 0.0 0.0 2576 916 ? S 12:04 0:00 /bin/sh -c ps xua | grep osmo
build 47408 0.0 0.0 3700 1788 ? S 12:04 0:00 grep osmo
Socket: in 1 tries, connected to 127.0.0.1:4271 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 45980), raddr=('127.0.0.1', 4271)> (1 sockets open)
Process returned code: 0
Socket: closing 127.0.0.1:4271 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 45980), raddr=('127.0.0.1', 4271)> (0 sockets open)
make[6]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/tests'
make[5]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/tests'
make[4]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/tests'
make[3]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/tests'
Making check in doc
make[3]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/doc'
Making check in examples
make[4]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/doc/examples'
make[4]: Nothing to be done for 'check'.
make[4]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/doc/examples'
Making check in manuals
make[4]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/doc/manuals'
if [ -n "$ASCIIDOC_WARNINGS_CHECK" ]; then \
make osmosmlc-usermanual.check; \
fi
make[5]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/doc/manuals'
if ! [ -f osmosmlc-usermanual.adoc ]; then \
ln -s osmosmlc-usermanual.adoc osmosmlc-usermanual.adoc; \
fi
asciidoc -v -f /opt/osmo-gsm-manuals/build/mscgen-filter.conf -f /opt/osmo-gsm-manuals/build/diag-filter.conf -f /opt/osmo-gsm-manuals/build/docinfo-releaseinfo.conf -f /opt/osmo-gsm-manuals/build/graphviz-filter.conf -a srcdir='/build/osmo-smlc-0.3.1/_build/sub/../../doc/manuals' -a commondir='/opt/osmo-gsm-manuals/common' osmosmlc-usermanual.adoc > osmosmlc-usermanual.check 2>&1
touch osmosmlc-usermanual.check
make[5]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/doc/manuals'
make[4]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/doc/manuals'
make[4]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/doc'
make[4]: Nothing to be done for 'check-am'.
make[4]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/doc'
make[3]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/doc'
Making check in contrib
make[3]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/contrib'
Making check in systemd
make[4]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/contrib/systemd'
make[4]: Nothing to be done for 'check'.
make[4]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/contrib/systemd'
make[4]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/contrib'
make[4]: Nothing to be done for 'check-am'.
make[4]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/contrib'
make[3]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/contrib'
make[3]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub'
make[3]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub'
make[2]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub'
make[1]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub'
make[1]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub'
make install-recursive
make[2]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub'
Making install in include
make[3]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/include'
Making install in osmocom
make[4]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/include/osmocom'
Making install in smlc
make[5]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/include/osmocom/smlc'
make[6]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/include/osmocom/smlc'
make[6]: Nothing to be done for 'install-exec-am'.
make[6]: Nothing to be done for 'install-data-am'.
make[6]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/include/osmocom/smlc'
make[5]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/include/osmocom/smlc'
make[5]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/include/osmocom'
make[6]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/include/osmocom'
make[6]: Nothing to be done for 'install-exec-am'.
make[6]: Nothing to be done for 'install-data-am'.
make[6]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/include/osmocom'
make[5]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/include/osmocom'
make[4]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/include/osmocom'
make[4]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/include'
make[5]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/include'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/include'
make[4]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/include'
make[3]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/include'
Making install in src
make[3]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/src'
Making install in osmo-smlc
make[4]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/src/osmo-smlc'
make[5]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/src/osmo-smlc'
make[5]: Nothing to be done for 'install-data-am'.
/usr/bin/mkdir -p '/build/osmo-smlc-0.3.1/_inst/bin'
/bin/bash ../../libtool --mode=install /usr/bin/install -c osmo-smlc '/build/osmo-smlc-0.3.1/_inst/bin'
libtool: install: /usr/bin/install -c osmo-smlc /build/osmo-smlc-0.3.1/_inst/bin/osmo-smlc
make[5]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/src/osmo-smlc'
make[4]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/src/osmo-smlc'
make[4]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/src'
make[5]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/src'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/src'
make[4]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/src'
make[3]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/src'
Making install in tests
make[3]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/tests'
Making install in smlc_subscr
make[4]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/tests/smlc_subscr'
make[5]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/tests/smlc_subscr'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/tests/smlc_subscr'
make[4]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/tests/smlc_subscr'
make[4]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/tests'
make[5]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/tests'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/tests'
make[4]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/tests'
make[3]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/tests'
Making install in doc
make[3]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/doc'
Making install in examples
make[4]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/doc/examples'
make[5]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/doc/examples'
make[5]: Nothing to be done for 'install-exec-am'.
/usr/bin/mkdir -p '/build/osmo-smlc-0.3.1/_inst/etc/osmocom'
/usr/bin/install -c -m 644 ../../../../doc/examples/osmo-smlc/osmo-smlc.cfg '/build/osmo-smlc-0.3.1/_inst/etc/osmocom'
make install-data-hook
make[6]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/doc/examples'
for f in $(find ../../../../doc/examples -name '*.cfg*' | sed -e 's,^../../../../doc/examples,,'); do \
j="/build/osmo-smlc-0.3.1/_inst/share/doc/osmo-smlc/examples/$f" && \
mkdir -p "$(dirname $j)" && \
/usr/bin/install -c -m 644 ../../../../doc/examples/$f $j; \
done
make[6]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/doc/examples'
make[5]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/doc/examples'
make[4]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/doc/examples'
Making install in manuals
make[4]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/doc/manuals'
make[5]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/doc/manuals'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/doc/manuals'
[ -n "osmo-smlc" ] || exit 1
if [ "" != "1" ]; then \
for i in osmosmlc-usermanual.pdf osmosmlc-vty-reference.pdf; do \
install -vDm644 "$i" "/build/osmo-smlc-0.3.1/_inst/share/doc/osmo-smlc-doc/$i" || exit 1; \
done; \
fi
install: creating directory '/build/osmo-smlc-0.3.1/_inst/share/doc/osmo-smlc-doc'
'osmosmlc-usermanual.pdf' -> '/build/osmo-smlc-0.3.1/_inst/share/doc/osmo-smlc-doc/osmosmlc-usermanual.pdf'
'osmosmlc-vty-reference.pdf' -> '/build/osmo-smlc-0.3.1/_inst/share/doc/osmo-smlc-doc/osmosmlc-vty-reference.pdf'
make[4]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/doc/manuals'
make[4]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/doc'
make[5]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/doc'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/doc'
make[4]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/doc'
make[3]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/doc'
Making install in contrib
make[3]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/contrib'
Making install in systemd
make[4]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/contrib/systemd'
make[5]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/contrib/systemd'
make[5]: Nothing to be done for 'install-exec-am'.
/usr/bin/mkdir -p '/build/osmo-smlc-0.3.1/_inst//lib/systemd/system'
/usr/bin/install -c -m 644 ../../../../contrib/systemd/osmo-smlc.service '/build/osmo-smlc-0.3.1/_inst//lib/systemd/system'
make[5]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/contrib/systemd'
make[4]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/contrib/systemd'
make[4]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/contrib'
make[5]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/contrib'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/contrib'
make[4]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/contrib'
make[3]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/contrib'
make[3]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub'
make[4]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub'
make[4]: Nothing to be done for 'install-exec-am'.
make[4]: Nothing to be done for 'install-data-am'.
make[4]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub'
make[3]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub'
make[2]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub'
make[1]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub'
make[1]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub'
Making installcheck in include
make[2]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/include'
Making installcheck in osmocom
make[3]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/include/osmocom'
Making installcheck in smlc
make[4]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/include/osmocom/smlc'
make[4]: Nothing to be done for 'installcheck'.
make[4]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/include/osmocom/smlc'
make[4]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/include/osmocom'
make[4]: Nothing to be done for 'installcheck-am'.
make[4]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/include/osmocom'
make[3]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/include/osmocom'
make[3]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/include'
make[3]: Nothing to be done for 'installcheck-am'.
make[3]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/include'
make[2]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/include'
Making installcheck in src
make[2]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/src'
Making installcheck in osmo-smlc
make[3]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/src/osmo-smlc'
make[3]: Nothing to be done for 'installcheck'.
make[3]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/src/osmo-smlc'
make[3]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/src'
make[3]: Nothing to be done for 'installcheck-am'.
make[3]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/src'
make[2]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/src'
Making installcheck in tests
make[2]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/tests'
Making installcheck in smlc_subscr
make[3]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/tests/smlc_subscr'
make[3]: Nothing to be done for 'installcheck'.
make[3]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/tests/smlc_subscr'
make[3]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/tests'
/bin/bash '../../../tests/testsuite' AUTOTEST_PATH='/build/osmo-smlc-0.3.1/_inst/bin' \
## --------------------------- ##
## osmo-smlc 0.3.1 test suite. ##
## --------------------------- ##
1: smlc_subscr ok
## ------------- ##
## Test results. ##
## ------------- ##
1 test was successful.
make[3]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/tests'
make[2]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/tests'
Making installcheck in doc
make[2]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/doc'
Making installcheck in examples
make[3]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/doc/examples'
make[3]: Nothing to be done for 'installcheck'.
make[3]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/doc/examples'
Making installcheck in manuals
make[3]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/doc/manuals'
make[3]: Nothing to be done for 'installcheck'.
make[3]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/doc/manuals'
make[3]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/doc'
make[3]: Nothing to be done for 'installcheck-am'.
make[3]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/doc'
make[2]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/doc'
Making installcheck in contrib
make[2]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/contrib'
Making installcheck in systemd
make[3]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/contrib/systemd'
make[3]: Nothing to be done for 'installcheck'.
make[3]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/contrib/systemd'
make[3]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/contrib'
make[3]: Nothing to be done for 'installcheck-am'.
make[3]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/contrib'
make[2]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/contrib'
make[2]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub'
make[2]: Nothing to be done for 'installcheck-am'.
make[2]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub'
make[1]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub'
make[1]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub'
Making uninstall in include
make[2]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/include'
Making uninstall in osmocom
make[3]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/include/osmocom'
Making uninstall in smlc
make[4]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/include/osmocom/smlc'
make[4]: Nothing to be done for 'uninstall'.
make[4]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/include/osmocom/smlc'
make[4]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/include/osmocom'
make[4]: Nothing to be done for 'uninstall-am'.
make[4]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/include/osmocom'
make[3]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/include/osmocom'
make[3]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/include'
make[3]: Nothing to be done for 'uninstall-am'.
make[3]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/include'
make[2]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/include'
Making uninstall in src
make[2]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/src'
Making uninstall in osmo-smlc
make[3]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/src/osmo-smlc'
( cd '/build/osmo-smlc-0.3.1/_inst/bin' && rm -f osmo-smlc )
make[3]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/src/osmo-smlc'
make[3]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/src'
make[3]: Nothing to be done for 'uninstall-am'.
make[3]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/src'
make[2]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/src'
Making uninstall in tests
make[2]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/tests'
Making uninstall in smlc_subscr
make[3]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/tests/smlc_subscr'
make[3]: Nothing to be done for 'uninstall'.
make[3]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/tests/smlc_subscr'
make[3]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/tests'
make[3]: Nothing to be done for 'uninstall-am'.
make[3]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/tests'
make[2]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/tests'
Making uninstall in doc
make[2]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/doc'
Making uninstall in examples
make[3]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/doc/examples'
( cd '/build/osmo-smlc-0.3.1/_inst/etc/osmocom' && rm -f osmo-smlc.cfg )
make uninstall-hook
make[4]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/doc/examples'
for f in $(find ../../../../doc/examples -name '*.cfg*' | sed -e 's,^../../../../doc/examples,,'); do \
j="/build/osmo-smlc-0.3.1/_inst/share/doc/osmo-smlc/examples/$f" && \
rm -f $j; \
done
make[4]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/doc/examples'
make[3]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/doc/examples'
Making uninstall in manuals
make[3]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/doc/manuals'
[ -n "osmo-smlc" ] || exit 1
if [ "" != "1" ]; then \
for i in osmosmlc-usermanual.pdf osmosmlc-vty-reference.pdf; do \
rm -v "/build/osmo-smlc-0.3.1/_inst/share/doc/osmo-smlc-doc/$i"; \
done; \
fi
removed '/build/osmo-smlc-0.3.1/_inst/share/doc/osmo-smlc-doc/osmosmlc-usermanual.pdf'
removed '/build/osmo-smlc-0.3.1/_inst/share/doc/osmo-smlc-doc/osmosmlc-vty-reference.pdf'
make[3]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/doc/manuals'
make[3]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/doc'
make[3]: Nothing to be done for 'uninstall-am'.
make[3]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/doc'
make[2]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/doc'
Making uninstall in contrib
make[2]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/contrib'
Making uninstall in systemd
make[3]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/contrib/systemd'
( cd '/build/osmo-smlc-0.3.1/_inst//lib/systemd/system' && rm -f osmo-smlc.service )
make[3]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/contrib/systemd'
make[3]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/contrib'
make[3]: Nothing to be done for 'uninstall-am'.
make[3]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/contrib'
make[2]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/contrib'
make[2]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub'
make[2]: Nothing to be done for 'uninstall-am'.
make[2]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub'
make[1]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub'
make[1]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub'
make[1]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub'
make[1]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub'
make install-recursive
make[2]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub'
Making install in include
make[3]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/include'
Making install in osmocom
make[4]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/include/osmocom'
Making install in smlc
make[5]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/include/osmocom/smlc'
make[6]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/include/osmocom/smlc'
make[6]: Nothing to be done for 'install-exec-am'.
make[6]: Nothing to be done for 'install-data-am'.
make[6]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/include/osmocom/smlc'
make[5]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/include/osmocom/smlc'
make[5]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/include/osmocom'
make[6]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/include/osmocom'
make[6]: Nothing to be done for 'install-exec-am'.
make[6]: Nothing to be done for 'install-data-am'.
make[6]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/include/osmocom'
make[5]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/include/osmocom'
make[4]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/include/osmocom'
make[4]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/include'
make[5]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/include'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/include'
make[4]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/include'
make[3]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/include'
Making install in src
make[3]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/src'
Making install in osmo-smlc
make[4]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/src/osmo-smlc'
make[5]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/src/osmo-smlc'
make[5]: Nothing to be done for 'install-data-am'.
/usr/bin/mkdir -p '/tmp/am-dc-44619//build/osmo-smlc-0.3.1/_inst/bin'
/bin/bash ../../libtool --mode=install /usr/bin/install -c osmo-smlc '/tmp/am-dc-44619//build/osmo-smlc-0.3.1/_inst/bin'
libtool: install: /usr/bin/install -c osmo-smlc /tmp/am-dc-44619//build/osmo-smlc-0.3.1/_inst/bin/osmo-smlc
make[5]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/src/osmo-smlc'
make[4]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/src/osmo-smlc'
make[4]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/src'
make[5]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/src'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/src'
make[4]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/src'
make[3]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/src'
Making install in tests
make[3]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/tests'
Making install in smlc_subscr
make[4]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/tests/smlc_subscr'
make[5]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/tests/smlc_subscr'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/tests/smlc_subscr'
make[4]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/tests/smlc_subscr'
make[4]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/tests'
make[5]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/tests'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/tests'
make[4]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/tests'
make[3]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/tests'
Making install in doc
make[3]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/doc'
Making install in examples
make[4]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/doc/examples'
make[5]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/doc/examples'
make[5]: Nothing to be done for 'install-exec-am'.
/usr/bin/mkdir -p '/tmp/am-dc-44619//build/osmo-smlc-0.3.1/_inst/etc/osmocom'
/usr/bin/install -c -m 644 ../../../../doc/examples/osmo-smlc/osmo-smlc.cfg '/tmp/am-dc-44619//build/osmo-smlc-0.3.1/_inst/etc/osmocom'
make install-data-hook
make[6]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/doc/examples'
for f in $(find ../../../../doc/examples -name '*.cfg*' | sed -e 's,^../../../../doc/examples,,'); do \
j="/tmp/am-dc-44619//build/osmo-smlc-0.3.1/_inst/share/doc/osmo-smlc/examples/$f" && \
mkdir -p "$(dirname $j)" && \
/usr/bin/install -c -m 644 ../../../../doc/examples/$f $j; \
done
make[6]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/doc/examples'
make[5]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/doc/examples'
make[4]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/doc/examples'
Making install in manuals
make[4]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/doc/manuals'
make[5]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/doc/manuals'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/doc/manuals'
[ -n "osmo-smlc" ] || exit 1
if [ "" != "1" ]; then \
for i in osmosmlc-usermanual.pdf osmosmlc-vty-reference.pdf; do \
install -vDm644 "$i" "/tmp/am-dc-44619//build/osmo-smlc-0.3.1/_inst/share/doc/osmo-smlc-doc/$i" || exit 1; \
done; \
fi
install: creating directory '/tmp/am-dc-44619//build/osmo-smlc-0.3.1/_inst/share/doc/osmo-smlc-doc'
'osmosmlc-usermanual.pdf' -> '/tmp/am-dc-44619//build/osmo-smlc-0.3.1/_inst/share/doc/osmo-smlc-doc/osmosmlc-usermanual.pdf'
'osmosmlc-vty-reference.pdf' -> '/tmp/am-dc-44619//build/osmo-smlc-0.3.1/_inst/share/doc/osmo-smlc-doc/osmosmlc-vty-reference.pdf'
make[4]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/doc/manuals'
make[4]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/doc'
make[5]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/doc'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/doc'
make[4]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/doc'
make[3]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/doc'
Making install in contrib
make[3]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/contrib'
Making install in systemd
make[4]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/contrib/systemd'
make[5]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/contrib/systemd'
make[5]: Nothing to be done for 'install-exec-am'.
/usr/bin/mkdir -p '/tmp/am-dc-44619//build/osmo-smlc-0.3.1/_inst//lib/systemd/system'
/usr/bin/install -c -m 644 ../../../../contrib/systemd/osmo-smlc.service '/tmp/am-dc-44619//build/osmo-smlc-0.3.1/_inst//lib/systemd/system'
make[5]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/contrib/systemd'
make[4]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/contrib/systemd'
make[4]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/contrib'
make[5]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/contrib'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/contrib'
make[4]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/contrib'
make[3]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/contrib'
make[3]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub'
make[4]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub'
make[4]: Nothing to be done for 'install-exec-am'.
make[4]: Nothing to be done for 'install-data-am'.
make[4]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub'
make[3]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub'
make[2]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub'
make[1]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub'
make[1]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub'
Making uninstall in include
make[2]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/include'
Making uninstall in osmocom
make[3]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/include/osmocom'
Making uninstall in smlc
make[4]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/include/osmocom/smlc'
make[4]: Nothing to be done for 'uninstall'.
make[4]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/include/osmocom/smlc'
make[4]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/include/osmocom'
make[4]: Nothing to be done for 'uninstall-am'.
make[4]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/include/osmocom'
make[3]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/include/osmocom'
make[3]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/include'
make[3]: Nothing to be done for 'uninstall-am'.
make[3]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/include'
make[2]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/include'
Making uninstall in src
make[2]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/src'
Making uninstall in osmo-smlc
make[3]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/src/osmo-smlc'
( cd '/tmp/am-dc-44619//build/osmo-smlc-0.3.1/_inst/bin' && rm -f osmo-smlc )
make[3]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/src/osmo-smlc'
make[3]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/src'
make[3]: Nothing to be done for 'uninstall-am'.
make[3]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/src'
make[2]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/src'
Making uninstall in tests
make[2]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/tests'
Making uninstall in smlc_subscr
make[3]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/tests/smlc_subscr'
make[3]: Nothing to be done for 'uninstall'.
make[3]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/tests/smlc_subscr'
make[3]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/tests'
make[3]: Nothing to be done for 'uninstall-am'.
make[3]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/tests'
make[2]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/tests'
Making uninstall in doc
make[2]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/doc'
Making uninstall in examples
make[3]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/doc/examples'
( cd '/tmp/am-dc-44619//build/osmo-smlc-0.3.1/_inst/etc/osmocom' && rm -f osmo-smlc.cfg )
make uninstall-hook
make[4]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/doc/examples'
for f in $(find ../../../../doc/examples -name '*.cfg*' | sed -e 's,^../../../../doc/examples,,'); do \
j="/tmp/am-dc-44619//build/osmo-smlc-0.3.1/_inst/share/doc/osmo-smlc/examples/$f" && \
rm -f $j; \
done
make[4]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/doc/examples'
make[3]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/doc/examples'
Making uninstall in manuals
make[3]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/doc/manuals'
[ -n "osmo-smlc" ] || exit 1
if [ "" != "1" ]; then \
for i in osmosmlc-usermanual.pdf osmosmlc-vty-reference.pdf; do \
rm -v "/tmp/am-dc-44619//build/osmo-smlc-0.3.1/_inst/share/doc/osmo-smlc-doc/$i"; \
done; \
fi
removed '/tmp/am-dc-44619//build/osmo-smlc-0.3.1/_inst/share/doc/osmo-smlc-doc/osmosmlc-usermanual.pdf'
removed '/tmp/am-dc-44619//build/osmo-smlc-0.3.1/_inst/share/doc/osmo-smlc-doc/osmosmlc-vty-reference.pdf'
make[3]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/doc/manuals'
make[3]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/doc'
make[3]: Nothing to be done for 'uninstall-am'.
make[3]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/doc'
make[2]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/doc'
Making uninstall in contrib
make[2]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/contrib'
Making uninstall in systemd
make[3]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/contrib/systemd'
( cd '/tmp/am-dc-44619//build/osmo-smlc-0.3.1/_inst//lib/systemd/system' && rm -f osmo-smlc.service )
make[3]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/contrib/systemd'
make[3]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/contrib'
make[3]: Nothing to be done for 'uninstall-am'.
make[3]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/contrib'
make[2]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/contrib'
make[2]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub'
make[2]: Nothing to be done for 'uninstall-am'.
make[2]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub'
make[1]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub'
make[1]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub'
make[1]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub'
make[1]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub'
make dist-bzip2 dist-gzip am__post_remove_distdir='@:'
make[2]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub'
make distdir-am
make[3]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub'
if test -d "osmo-smlc-0.3.1"; then find "osmo-smlc-0.3.1" -type d ! -perm -200 -exec chmod u+w {} ';' && rm -rf "osmo-smlc-0.3.1" || { sleep 5 && rm -rf "osmo-smlc-0.3.1"; }; else :; fi
test -d "osmo-smlc-0.3.1" || mkdir "osmo-smlc-0.3.1"
(cd include && make top_distdir=../osmo-smlc-0.3.1 distdir=../osmo-smlc-0.3.1/include \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[4]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/include'
make distdir-am
make[5]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/include'
(cd osmocom && make top_distdir=../../osmo-smlc-0.3.1 distdir=../../osmo-smlc-0.3.1/include/osmocom \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[6]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/include/osmocom'
make distdir-am
make[7]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/include/osmocom'
(cd smlc && make top_distdir=../../../osmo-smlc-0.3.1 distdir=../../../osmo-smlc-0.3.1/include/osmocom/smlc \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[8]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/include/osmocom/smlc'
make distdir-am
make[9]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/include/osmocom/smlc'
make[9]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/include/osmocom/smlc'
make[8]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/include/osmocom/smlc'
make[7]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/include/osmocom'
make[6]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/include/osmocom'
make[5]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/include'
make[4]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/include'
(cd src && make top_distdir=../osmo-smlc-0.3.1 distdir=../osmo-smlc-0.3.1/src \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[4]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/src'
make distdir-am
make[5]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/src'
(cd osmo-smlc && make top_distdir=../../osmo-smlc-0.3.1 distdir=../../osmo-smlc-0.3.1/src/osmo-smlc \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[6]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/src/osmo-smlc'
make distdir-am
make[7]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/src/osmo-smlc'
make[7]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/src/osmo-smlc'
make[6]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/src/osmo-smlc'
make[5]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/src'
make[4]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/src'
(cd tests && make top_distdir=../osmo-smlc-0.3.1 distdir=../osmo-smlc-0.3.1/tests \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[4]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/tests'
make distdir-am
make[5]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/tests'
(cd smlc_subscr && make top_distdir=../../osmo-smlc-0.3.1 distdir=../../osmo-smlc-0.3.1/tests/smlc_subscr \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[6]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/tests/smlc_subscr'
make distdir-am
make[7]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/tests/smlc_subscr'
make[7]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/tests/smlc_subscr'
make[6]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/tests/smlc_subscr'
make[5]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/tests'
make[4]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/tests'
(cd doc && make top_distdir=../osmo-smlc-0.3.1 distdir=../osmo-smlc-0.3.1/doc \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[4]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/doc'
make distdir-am
make[5]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/doc'
(cd examples && make top_distdir=../../osmo-smlc-0.3.1 distdir=../../osmo-smlc-0.3.1/doc/examples \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[6]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/doc/examples'
make distdir-am
make[7]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/doc/examples'
make \
top_distdir="../../osmo-smlc-0.3.1" distdir="../../osmo-smlc-0.3.1/doc/examples" \
dist-hook
make[8]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/doc/examples'
for f in $(find ../../../../doc/examples -name '*.cfg*' | sed -e 's,^../../../../doc/examples,,'); do \
j="../../osmo-smlc-0.3.1/doc/examples/$f" && \
mkdir -p "$(dirname $j)" && \
/usr/bin/install -c -m 644 ../../../../doc/examples/$f $j; \
done
make[8]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/doc/examples'
make[7]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/doc/examples'
make[6]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/doc/examples'
(cd manuals && make top_distdir=../../osmo-smlc-0.3.1 distdir=../../osmo-smlc-0.3.1/doc/manuals \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[6]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/doc/manuals'
make distdir-am
make[7]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/doc/manuals'
make[7]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/doc/manuals'
make[6]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/doc/manuals'
make[5]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/doc'
make[4]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/doc'
(cd contrib && make top_distdir=../osmo-smlc-0.3.1 distdir=../osmo-smlc-0.3.1/contrib \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[4]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/contrib'
make distdir-am
make[5]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/contrib'
(cd systemd && make top_distdir=../../osmo-smlc-0.3.1 distdir=../../osmo-smlc-0.3.1/contrib/systemd \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[6]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/contrib/systemd'
make distdir-am
make[7]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/contrib/systemd'
make[7]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/contrib/systemd'
make[6]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/contrib/systemd'
make[5]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/contrib'
make[4]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/contrib'
make \
top_distdir="osmo-smlc-0.3.1" distdir="osmo-smlc-0.3.1" \
dist-hook
make[4]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub'
echo 0.3.1 > osmo-smlc-0.3.1/.tarball-version
make[4]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub'
test -n "" \
|| find "osmo-smlc-0.3.1" -type d ! -perm -755 \
-exec chmod u+rwx,go+rx {} \; -o \
! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
! -type d ! -perm -400 -exec chmod a+r {} \; -o \
! -type d ! -perm -444 -exec /bin/bash /build/osmo-smlc-0.3.1/install-sh -c -m a+r {} {} \; \
|| chmod -R a+r "osmo-smlc-0.3.1"
make[3]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub'
tardir=osmo-smlc-0.3.1 && ${TAR-tar} chof - "$tardir" | BZIP2=${BZIP2--9} bzip2 -c >osmo-smlc-0.3.1.tar.bz2
tardir=osmo-smlc-0.3.1 && ${TAR-tar} chof - "$tardir" | eval GZIP= gzip --best -c >osmo-smlc-0.3.1.tar.gz
make[2]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub'
if test -d "osmo-smlc-0.3.1"; then find "osmo-smlc-0.3.1" -type d ! -perm -200 -exec chmod u+w {} ';' && rm -rf "osmo-smlc-0.3.1" || { sleep 5 && rm -rf "osmo-smlc-0.3.1"; }; else :; fi
make[1]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub'
make[1]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub'
Making distclean in include
make[2]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/include'
Making distclean in osmocom
make[3]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/include/osmocom'
Making distclean in smlc
make[4]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/include/osmocom/smlc'
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "../../../../../include/osmocom/smlc" || test -z "" || rm -f
rm -f Makefile
make[4]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/include/osmocom/smlc'
make[4]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/include/osmocom'
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "../../../../include/osmocom" || test -z "" || rm -f
make[4]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/include/osmocom'
rm -f Makefile
make[3]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/include/osmocom'
make[3]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/include'
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "../../../include" || test -z "" || rm -f
make[3]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/include'
rm -f Makefile
make[2]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/include'
Making distclean in src
make[2]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/src'
Making distclean in osmo-smlc
make[3]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/src/osmo-smlc'
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
rm -f *.tab.c
test -z "" || rm -f
rm -f osmo-smlc
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "../../../../src/osmo-smlc" || test -z "" || rm -f
rm -f ./.deps/cell_locations.Po
rm -f ./.deps/lb_conn.Po
rm -f ./.deps/lb_peer.Po
rm -f ./.deps/sccp_lb_inst.Po
rm -f ./.deps/smlc_ctrl.Po
rm -f ./.deps/smlc_data.Po
rm -f ./.deps/smlc_loc_req.Po
rm -f ./.deps/smlc_main.Po
rm -f ./.deps/smlc_subscr.Po
rm -f Makefile
make[3]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/src/osmo-smlc'
make[3]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/src'
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "../../../src" || test -z "" || rm -f
make[3]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/src'
rm -f Makefile
make[2]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/src'
Making distclean in tests
make[2]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/tests'
Making distclean in smlc_subscr
make[3]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/tests/smlc_subscr'
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
rm -f *.tab.c
test -z "" || rm -f
rm -f smlc_subscr_test
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "../../../../tests/smlc_subscr" || test -z "" || rm -f
rm -f ./.deps/smlc_subscr_test.Po
rm -f Makefile
make[3]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/tests/smlc_subscr'
make[3]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/tests'
rm -rf .libs _libs
test ! -f '../../../tests/testsuite' || \
/bin/bash '../../../tests/testsuite' --clean
rm -f *.lo
test -z "atlocal" || rm -f atlocal
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "../../../tests" || test -z "" || rm -f
test -z "atconfig " || rm -f atconfig
make[3]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/tests'
rm -f Makefile
make[2]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/tests'
Making distclean in doc
make[2]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/doc'
Making distclean in examples
make[3]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/doc/examples'
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f
test . = "../../../../doc/examples" || test -z "" || rm -f
rm -f Makefile
make[3]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/doc/examples'
Making distclean in manuals
make[3]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/doc/manuals'
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f
test . = "../../../../doc/manuals" || test -z "" || rm -f
rm -rf osmosmlc-usermanual__*.png osmosmlc-usermanual__*.svg osmosmlc-usermanual.check osmosmlc-usermanual.pdf osmosmlc-usermanual.html osmosmlc-vty-reference.pdf osmosmlc-vty-reference.lint generated ./vty/smlc_vty_reference.xml common build generated/.pdf_shrink_marker
rm -f Makefile
make[3]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/doc/manuals'
make[3]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/doc'
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "../../../doc" || test -z "" || rm -f
make[3]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/doc'
rm -f Makefile
make[2]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/doc'
Making distclean in contrib
make[2]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/contrib'
Making distclean in systemd
make[3]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/contrib/systemd'
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f
test . = "../../../../contrib/systemd" || test -z "" || rm -f
rm -f Makefile
make[3]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/contrib/systemd'
make[3]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub/contrib'
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "../../../contrib" || test -z "" || rm -f
make[3]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/contrib'
rm -f Makefile
make[2]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub/contrib'
make[2]: Entering directory '/build/osmo-smlc-0.3.1/_build/sub'
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f
rm -f config.h stamp-h1
rm -f libtool config.lt
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "../.." || test -z "" || rm -f
rm -f cscope.out cscope.in.out cscope.po.out cscope.files
make[2]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub'
rm -f config.status config.cache config.log configure.lineno config.status.lineno
rm -f Makefile
make[1]: Leaving directory '/build/osmo-smlc-0.3.1/_build/sub'
if test -d "osmo-smlc-0.3.1"; then find "osmo-smlc-0.3.1" -type d ! -perm -200 -exec chmod u+w {} ';' && rm -rf "osmo-smlc-0.3.1" || { sleep 5 && rm -rf "osmo-smlc-0.3.1"; }; else :; fi
=================================================
osmo-smlc-0.3.1 archives ready for distribution:
osmo-smlc-0.3.1.tar.gz
osmo-smlc-0.3.1.tar.bz2
=================================================
+ '[' 1 = 1 ']'
+ '[' 1 = 1 ']'
+ make -C /build/doc/manuals publish
make: Entering directory '/build/doc/manuals'
/opt/osmo-gsm-manuals/build/shrink-pdfs.sh osmosmlc-usermanual.pdf osmosmlc-vty-reference.pdf
* osmosmlc-usermanual.pdf: 564K
* osmosmlc-vty-reference.pdf: 256K
[ -n "osmo-smlc" ] || exit 1
rm -rf "_publish_tmpdir"
mkdir -p "_publish_tmpdir/osmo-smlc/master"
cp osmosmlc-usermanual.pdf osmosmlc-vty-reference.pdf "_publish_tmpdir/osmo-smlc/master"
cd "_publish_tmpdir" && \
rsync \
-avzR \
-e "ssh -o 'UserKnownHostsFile=/opt/osmo-gsm-manuals/build/known_hosts' -p 48" \
"osmo-smlc" \
docs@ftp.osmocom.org:web-files/
sending incremental file list
osmo-smlc/
osmo-smlc/master/
osmo-smlc/master/osmosmlc-usermanual.pdf
osmo-smlc/master/osmosmlc-vty-reference.pdf
sent 13,964 bytes received 6,888 bytes 13,901.33 bytes/sec
total size is 834,944 speedup is 40.04
rm -rf "_publish_tmpdir"
make: Leaving directory '/build/doc/manuals'
+ make -j 12 maintainer-clean
Making maintainer-clean in include
make[1]: Entering directory '/build/include'
Making maintainer-clean in osmocom
make[2]: Entering directory '/build/include/osmocom'
Making maintainer-clean in smlc
make[3]: Entering directory '/build/include/osmocom/smlc'
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "." || test -z "" || rm -f
This command is intended for maintainers to use
it deletes files that may require special tools to rebuild.
rm -f Makefile
make[3]: Leaving directory '/build/include/osmocom/smlc'
make[3]: Entering directory '/build/include/osmocom'
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "." || test -z "" || rm -f
This command is intended for maintainers to use
it deletes files that may require special tools to rebuild.
make[3]: Leaving directory '/build/include/osmocom'
rm -f Makefile
make[2]: Leaving directory '/build/include/osmocom'
make[2]: Entering directory '/build/include'
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "." || test -z "" || rm -f
This command is intended for maintainers to use
it deletes files that may require special tools to rebuild.
make[2]: Leaving directory '/build/include'
rm -f Makefile
make[1]: Leaving directory '/build/include'
Making maintainer-clean in src
make[1]: Entering directory '/build/src'
Making maintainer-clean in osmo-smlc
make[2]: Entering directory '/build/src/osmo-smlc'
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
rm -f osmo-smlc
rm -f *.tab.c
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
This command is intended for maintainers to use
test . = "." || test -z "" || rm -f
it deletes files that may require special tools to rebuild.
rm -f ./.deps/cell_locations.Po
rm -f ./.deps/lb_conn.Po
rm -f ./.deps/lb_peer.Po
rm -f ./.deps/sccp_lb_inst.Po
rm -f ./.deps/smlc_ctrl.Po
rm -f ./.deps/smlc_data.Po
rm -f ./.deps/smlc_loc_req.Po
rm -f ./.deps/smlc_main.Po
rm -f ./.deps/smlc_subscr.Po
rm -f Makefile
make[2]: Leaving directory '/build/src/osmo-smlc'
make[2]: Entering directory '/build/src'
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "." || test -z "" || rm -f
This command is intended for maintainers to use
it deletes files that may require special tools to rebuild.
make[2]: Leaving directory '/build/src'
rm -f Makefile
make[1]: Leaving directory '/build/src'
Making maintainer-clean in tests
make[1]: Entering directory '/build/tests'
Making maintainer-clean in smlc_subscr
make[2]: Entering directory '/build/tests/smlc_subscr'
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
rm -f smlc_subscr_test
rm -f *.tab.c
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "." || test -z "" || rm -f
This command is intended for maintainers to use
it deletes files that may require special tools to rebuild.
rm -f ./.deps/smlc_subscr_test.Po
rm -f Makefile
make[2]: Leaving directory '/build/tests/smlc_subscr'
make[2]: Entering directory '/build/tests'
rm -rf .libs _libs
test ! -f './testsuite' || \
/bin/bash './testsuite' --clean
rm -f *.lo
test -z "atlocal" || rm -f atlocal
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
This command is intended for maintainers to use
test . = "." || test -z "" || rm -f
test -z "atconfig " || rm -f atconfig
it deletes files that may require special tools to rebuild.
make[2]: Leaving directory '/build/tests'
rm -f Makefile
make[1]: Leaving directory '/build/tests'
Making maintainer-clean in doc
make[1]: Entering directory '/build/doc'
Making maintainer-clean in examples
make[2]: Entering directory '/build/doc/examples'
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f
test . = "." || test -z "" || rm -f
This command is intended for maintainers to use
it deletes files that may require special tools to rebuild.
rm -f Makefile
make[2]: Leaving directory '/build/doc/examples'
Making maintainer-clean in manuals
make[2]: Entering directory '/build/doc/manuals'
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f
This command is intended for maintainers to use
test . = "." || test -z "" || rm -f
it deletes files that may require special tools to rebuild.
rm -f Makefile
make[2]: Leaving directory '/build/doc/manuals'
make[2]: Entering directory '/build/doc'
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "." || test -z "" || rm -f
This command is intended for maintainers to use
it deletes files that may require special tools to rebuild.
make[2]: Leaving directory '/build/doc'
rm -f Makefile
make[1]: Leaving directory '/build/doc'
Making maintainer-clean in contrib
make[1]: Entering directory '/build/contrib'
Making maintainer-clean in systemd
make[2]: Entering directory '/build/contrib/systemd'
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f
test . = "." || test -z "" || rm -f
This command is intended for maintainers to use
it deletes files that may require special tools to rebuild.
rm -f Makefile
make[2]: Leaving directory '/build/contrib/systemd'
make[2]: Entering directory '/build/contrib'
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "." || test -z "" || rm -f
This command is intended for maintainers to use
it deletes files that may require special tools to rebuild.
make[2]: Leaving directory '/build/contrib'
rm -f Makefile
make[1]: Leaving directory '/build/contrib'
make[1]: Entering directory '/build'
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f
rm -f config.h stamp-h1
rm -f libtool config.lt
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "." || test -z "" || rm -f
This command is intended for maintainers to use
rm -f cscope.out cscope.in.out cscope.po.out cscope.files
it deletes files that may require special tools to rebuild.
test -z "./.version" || rm -f ./.version
make[1]: Leaving directory '/build'
rm -f config.status config.cache config.log configure.lineno config.status.lineno
rm -rf ./autom4te.cache
rm -f Makefile
+ osmo-clean-workspace.sh
+ chmod -R +w .
+ git checkout -f HEAD
+ git clean -dxf
Removing .cache/
Removing .texlive2022/
Removing Makefile.in
Removing __pycache__/
Removing aclocal.m4
Removing compile
Removing config.guess
Removing config.h.in
Removing config.sub
Removing configure
Removing contrib/Makefile.in
Removing contrib/systemd/Makefile.in
Removing depcomp
Skipping repository deps/libosmo-sigtran
Skipping repository deps/osmo-gsm-manuals
Skipping repository deps/libosmo-abis
Skipping repository deps/libosmo-netif
Skipping repository deps/libosmocore
Removing deps/install
Removing doc/Makefile.in
Removing doc/examples/Makefile.in
Removing doc/manuals/Makefile.in
Removing doc/manuals/build
Removing doc/manuals/common
Removing doc/manuals/generated/
Removing doc/manuals/osmosmlc-usermanual.check
Removing doc/manuals/osmosmlc-usermanual.html
Removing doc/manuals/osmosmlc-usermanual.pdf
Removing doc/manuals/osmosmlc-usermanual__1.svg
Removing doc/manuals/osmosmlc-usermanual__2.svg
Removing doc/manuals/osmosmlc-usermanual__3.svg
Removing doc/manuals/osmosmlc-usermanual__4.svg
Removing doc/manuals/osmosmlc-usermanual__5.svg
Removing doc/manuals/osmosmlc-usermanual__6.svg
Removing doc/manuals/osmosmlc-usermanual__7.svg
Removing doc/manuals/osmosmlc-vty-reference.pdf
Removing include/Makefile.in
Removing include/osmocom/Makefile.in
Removing include/osmocom/smlc/Makefile.in
Removing install-sh
Removing ltmain.sh
Removing m4/
Removing missing
Removing osmo-smlc-0.3.1.tar.bz2
Removing osmo-smlc-0.3.1.tar.gz
Removing src/Makefile.in
Removing src/osmo-smlc/.deps/
Removing src/osmo-smlc/Makefile.in
Removing tests/Makefile.in
Removing tests/package.m4
Removing tests/smlc_subscr/.deps/
Removing tests/smlc_subscr/Makefile.in
Removing tests/testsuite
+ [ -d /build/deps ]
+ git_clean /build/deps/libosmo-abis
+ repos=/build/deps/libosmo-abis
+ [ ! -d /build/deps/libosmo-abis ]
+ [ ! -d /build/deps/libosmo-abis/.git ]
+ git -C /build/deps/libosmo-abis checkout -f HEAD
+ git -C /build/deps/libosmo-abis clean -dxf
+ git_clean /build/deps/libosmo-netif
+ repos=/build/deps/libosmo-netif
+ [ ! -d /build/deps/libosmo-netif ]
+ [ ! -d /build/deps/libosmo-netif/.git ]
+ git -C /build/deps/libosmo-netif checkout -f HEAD
Removing .version
Removing Makefile
Removing Makefile.in
Removing aclocal.m4
Removing autom4te.cache/
Removing compile
Removing config.guess
Removing config.h
Removing config.h.in
Removing config.log
Removing config.status
Removing config.sub
Removing configure
Removing depcomp
Removing include/Makefile
Removing include/Makefile.in
Removing install-sh
Removing libosmoabis.pc
Removing libosmotrau.pc
Removing libtool
Removing ltmain.sh
Removing m4/libtool.m4
Removing m4/ltoptions.m4
Removing m4/ltsugar.m4
Removing m4/ltversion.m4
Removing m4/lt~obsolete.m4
Removing missing
Removing src/.deps/
Removing src/.libs/
Removing src/Makefile
Removing src/Makefile.in
Removing src/e1_input.lo
Removing src/e1_input.o
Removing src/e1_input_vty.lo
Removing src/e1_input_vty.o
Removing src/init.lo
Removing src/init.o
Removing src/input/.deps/
Removing src/input/.dirstamp
Removing src/input/.libs/
Removing src/input/dahdi.lo
Removing src/input/dahdi.o
Removing src/input/e1d.lo
Removing src/input/e1d.o
Removing src/input/ipa.lo
Removing src/input/ipa.o
Removing src/input/ipa_keepalive.lo
Removing src/input/ipa_keepalive.o
Removing src/input/ipaccess.lo
Removing src/input/ipaccess.o
Removing src/input/lapd.lo
Removing src/input/lapd.o
Removing src/input/lapd_pcap.lo
Removing src/input/lapd_pcap.o
Removing src/input/misdn.lo
Removing src/input/misdn.o
Removing src/input/rs232.lo
Removing src/input/rs232.o
Removing src/input/unixsocket.lo
Removing src/input/unixsocket.o
Removing src/ipa_proxy.lo
Removing src/ipa_proxy.o
Removing src/libosmoabis.la
Removing src/libosmotrau.la
Removing src/subchan_demux.lo
Removing src/subchan_demux.o
Removing src/trau/.deps/
Removing src/trau/.dirstamp
Removing src/trau/.libs/
Removing src/trau/libosmotrau_la-csd_ra2.lo
Removing src/trau/libosmotrau_la-csd_ra2.o
Removing src/trau/libosmotrau_la-osmo_ortp.lo
Removing src/trau/libosmotrau_la-osmo_ortp.o
Removing src/trau/libosmotrau_la-raa_prime_decode.lo
Removing src/trau/libosmotrau_la-raa_prime_decode.o
Removing src/trau/libosmotrau_la-raa_prime_encode.lo
Removing src/trau/libosmotrau_la-raa_prime_encode.o
Removing src/trau/libosmotrau_la-trau_frame.lo
Removing src/trau/libosmotrau_la-trau_frame.o
Removing src/trau/libosmotrau_la-trau_pcu_ericsson.lo
Removing src/trau/libosmotrau_la-trau_pcu_ericsson.o
Removing src/trau/libosmotrau_la-trau_rtp_conv.lo
Removing src/trau/libosmotrau_la-trau_rtp_conv.o
Removing src/trau/libosmotrau_la-trau_sync.lo
Removing src/trau/libosmotrau_la-trau_sync.o
Removing src/trau_frame.lo
Removing src/trau_frame.o
Removing stamp-h1
Removing tests/.deps/
Removing tests/Makefile
Removing tests/Makefile.in
Removing tests/atconfig
Removing tests/ipa_recv/.deps/
Removing tests/raa_prime/.deps/
Removing tests/rtp_test/.deps/
Removing tests/subchan_demux/.deps/
Removing tests/trau_conv/.deps/
Removing tests/trau_pcu_ericsson/.deps/
Removing tests/trau_sync/.deps/
+ git -C /build/deps/libosmo-netif clean -dxf
Removing .version
Removing Doxyfile
Removing Makefile
Removing Makefile.in
Removing aclocal.m4
Removing autom4te.cache/
Removing compile
Removing config.guess
Removing config.h
Removing config.h.in
Removing config.log
Removing config.status
Removing config.sub
Removing configure
Removing depcomp
Removing doc/
Removing examples/.deps/
Removing examples/.libs/
Removing examples/Makefile
Removing examples/Makefile.in
Removing examples/ipa-stream-client
Removing examples/ipa-stream-client.o
Removing examples/ipa-stream-server
Removing examples/ipa-stream-server.o
Removing examples/osmux-test-input
Removing examples/osmux-test-input.o
Removing examples/osmux-test-output
Removing examples/osmux-test-output.o
Removing examples/rs232-read
Removing examples/rs232-read.o
Removing examples/rs232-write
Removing examples/rs232-write.o
Removing examples/rtp-udp-test-client
Removing examples/rtp-udp-test-client.o
Removing examples/rtp-udp-test-server
Removing examples/rtp-udp-test-server.o
Removing examples/stream-client
Removing examples/stream-client.o
Removing examples/stream-server
Removing examples/stream-server.o
Removing examples/udp-test-client
Removing examples/udp-test-client.o
Removing examples/udp-test-server
Removing examples/udp-test-server.o
Removing include/Makefile
Removing include/Makefile.in
Removing include/osmocom/Makefile
Removing include/osmocom/Makefile.in
Removing include/osmocom/netif/Makefile
Removing include/osmocom/netif/Makefile.in
Removing install-sh
Removing libosmo-netif.pc
Removing libtool
Removing ltmain.sh
Removing m4/libtool.m4
Removing m4/ltoptions.m4
Removing m4/ltsugar.m4
Removing m4/ltversion.m4
Removing m4/lt~obsolete.m4
Removing missing
Removing src/.deps/
Removing src/.libs/
Removing src/Makefile
Removing src/Makefile.in
Removing src/amr.lo
Removing src/amr.o
Removing src/datagram.lo
Removing src/datagram.o
Removing src/ipa.lo
Removing src/ipa.o
Removing src/ipa_unit.lo
Removing src/ipa_unit.o
Removing src/jibuf.lo
Removing src/jibuf.o
Removing src/libosmonetif.la
Removing src/osmux.lo
Removing src/osmux.o
Removing src/osmux_input.lo
Removing src/osmux_input.o
Removing src/osmux_output.lo
Removing src/osmux_output.o
Removing src/prim.lo
Removing src/prim.o
Removing src/rs232.lo
Removing src/rs232.o
Removing src/rtp.lo
Removing src/rtp.o
Removing src/sctp.lo
Removing src/sctp.o
Removing src/stream.lo
Removing src/stream.o
Removing src/stream_cli.lo
Removing src/stream_cli.o
Removing src/stream_srv.lo
Removing src/stream_srv.o
Removing stamp-h1
Removing tests/Makefile
Removing tests/Makefile.in
Removing tests/amr/.deps/
Removing tests/atconfig
Removing tests/jibuf/.deps/
Removing tests/osmo-pcap-test/.deps/
Removing tests/osmux/.deps/
Removing tests/stream/.deps/
Removing utils/.deps/
Removing utils/.libs/
Removing utils/Makefile
Removing utils/Makefile.in
Removing utils/osmo-amr-inspect
Removing utils/osmo-amr-inspect.o
+ git_clean /build/deps/libosmo-sigtran
+ repos=/build/deps/libosmo-sigtran
+ [ ! -d /build/deps/libosmo-sigtran ]
+ [ ! -d /build/deps/libosmo-sigtran/.git ]
+ git -C /build/deps/libosmo-sigtran checkout -f HEAD
+ git -C /build/deps/libosmo-sigtran clean -dxf
Removing .version
Removing Doxyfile
Removing Makefile
Removing Makefile.in
Removing aclocal.m4
Removing autom4te.cache/
Removing compile
Removing config.guess
Removing config.log
Removing config.status
Removing config.sub
Removing configure
Removing contrib/Makefile
Removing contrib/Makefile.in
Removing contrib/systemd/Makefile
Removing contrib/systemd/Makefile.in
Removing depcomp
Removing doc/Makefile
Removing doc/Makefile.in
Removing doc/examples/Makefile
Removing doc/examples/Makefile.in
Removing doc/html.tar
Removing doc/libosmo-sigtran.tag
Removing doc/manuals/Makefile
Removing doc/manuals/Makefile.in
Removing doc/sigtran/
Removing examples/.deps/
Removing examples/.libs/
Removing examples/Makefile
Removing examples/Makefile.in
Removing examples/sccp_demo_user
Removing examples/sccp_demo_user.o
Removing examples/sccp_test_server.o
Removing examples/sccp_test_vty.o
Removing include/Makefile
Removing include/Makefile.in
Removing include/osmocom/Makefile
Removing include/osmocom/Makefile.in
Removing include/osmocom/sccp/Makefile
Removing include/osmocom/sccp/Makefile.in
Removing include/osmocom/sigtran/Makefile
Removing include/osmocom/sigtran/Makefile.in
Removing install-sh
Removing libosmo-sigtran.pc
Removing libtool
Removing ltmain.sh
Removing missing
Removing src/.deps/
Removing src/.libs/
Removing src/Makefile
Removing src/Makefile.in
Removing src/ipa.lo
Removing src/ipa.o
Removing src/libosmo-sigtran.la
Removing src/libxua.a
Removing src/libxua_a-xua_msg.o
Removing src/m3ua.lo
Removing src/m3ua.o
Removing src/osmo_ss7.lo
Removing src/osmo_ss7.o
Removing src/osmo_ss7_as.lo
Removing src/osmo_ss7_as.o
Removing src/osmo_ss7_asp.lo
Removing src/osmo_ss7_asp.o
Removing src/osmo_ss7_asp_peer.lo
Removing src/osmo_ss7_asp_peer.o
Removing src/osmo_ss7_hmrt.lo
Removing src/osmo_ss7_hmrt.o
Removing src/osmo_ss7_instance.lo
Removing src/osmo_ss7_instance.o
Removing src/osmo_ss7_link.lo
Removing src/osmo_ss7_link.o
Removing src/osmo_ss7_linkset.lo
Removing src/osmo_ss7_linkset.o
Removing src/osmo_ss7_route.lo
Removing src/osmo_ss7_route.o
Removing src/osmo_ss7_route_table.lo
Removing src/osmo_ss7_route_table.o
Removing src/osmo_ss7_user.lo
Removing src/osmo_ss7_user.o
Removing src/osmo_ss7_vty.lo
Removing src/osmo_ss7_vty.o
Removing src/osmo_ss7_xua_srv.lo
Removing src/osmo_ss7_xua_srv.o
Removing src/sccp2sua.lo
Removing src/sccp2sua.o
Removing src/sccp_helpers.lo
Removing src/sccp_helpers.o
Removing src/sccp_lbcs.lo
Removing src/sccp_lbcs.o
Removing src/sccp_sap.lo
Removing src/sccp_sap.o
Removing src/sccp_sclc.lo
Removing src/sccp_sclc.o
Removing src/sccp_scmg.lo
Removing src/sccp_scmg.o
Removing src/sccp_scoc.lo
Removing src/sccp_scoc.o
Removing src/sccp_scrc.lo
Removing src/sccp_scrc.o
Removing src/sccp_types.lo
Removing src/sccp_types.o
Removing src/sccp_user.lo
Removing src/sccp_user.o
Removing src/sccp_vty.lo
Removing src/sccp_vty.o
Removing src/sua.lo
Removing src/sua.o
Removing src/xua_as_fsm.lo
Removing src/xua_as_fsm.o
Removing src/xua_asp_fsm.lo
Removing src/xua_asp_fsm.o
Removing src/xua_default_lm_fsm.lo
Removing src/xua_default_lm_fsm.o
Removing src/xua_msg.lo
Removing src/xua_msg.o
Removing src/xua_rkm.lo
Removing src/xua_rkm.o
Removing src/xua_shared.lo
Removing src/xua_shared.o
Removing src/xua_snm.lo
Removing src/xua_snm.o
Removing stp/.deps/
Removing stp/.libs/
Removing stp/Makefile
Removing stp/Makefile.in
Removing stp/osmo-stp
Removing stp/stp_main.o
Removing tests/Makefile
Removing tests/Makefile.in
Removing tests/atconfig
Removing tests/m2ua/.deps/
Removing tests/m2ua/Makefile
Removing tests/m2ua/Makefile.in
Removing tests/ss7/.deps/
Removing tests/ss7/Makefile
Removing tests/ss7/Makefile.in
Removing tests/vty/.deps/
Removing tests/vty/Makefile
Removing tests/vty/Makefile.in
Removing tests/xua/.deps/
Removing tests/xua/Makefile
Removing tests/xua/Makefile.in
+ git_clean /build/deps/libosmocore
+ repos=/build/deps/libosmocore
+ [ ! -d /build/deps/libosmocore ]
+ [ ! -d /build/deps/libosmocore/.git ]
+ git -C /build/deps/libosmocore checkout -f HEAD
+ git -C /build/deps/libosmocore clean -dxf
Removing .version
Removing Doxyfile.codec
Removing Doxyfile.coding
Removing Doxyfile.ctrl
Removing Doxyfile.gb
Removing Doxyfile.gsm
Removing Doxyfile.isdn
Removing Doxyfile.sim
Removing Doxyfile.usb
Removing Doxyfile.vty
Removing Makefile
Removing Makefile.in
Removing aclocal.m4
Removing autom4te.cache/
Removing compile
Removing config.guess
Removing config.h
Removing config.h.in
Removing config.log
Removing config.status
Removing config.sub
Removing configure
Removing contrib/libosmocore.spec
Removing depcomp
Removing include/Makefile
Removing include/Makefile.in
Removing include/osmocom/Makefile
Removing include/osmocom/Makefile.in
Removing include/osmocom/codec/Makefile
Removing include/osmocom/codec/Makefile.in
Removing include/osmocom/coding/Makefile
Removing include/osmocom/coding/Makefile.in
Removing include/osmocom/core/Makefile
Removing include/osmocom/core/Makefile.in
Removing include/osmocom/core/bit16gen.h
Removing include/osmocom/core/bit32gen.h
Removing include/osmocom/core/bit64gen.h
Removing include/osmocom/core/crc16gen.h
Removing include/osmocom/core/crc32gen.h
Removing include/osmocom/core/crc64gen.h
Removing include/osmocom/core/crc8gen.h
Removing include/osmocom/core/socket_compat.h
Removing include/osmocom/crypt/Makefile
Removing include/osmocom/crypt/Makefile.in
Removing include/osmocom/ctrl/Makefile
Removing include/osmocom/ctrl/Makefile.in
Removing include/osmocom/gprs/Makefile
Removing include/osmocom/gprs/Makefile.in
Removing include/osmocom/gprs/protocol/Makefile
Removing include/osmocom/gprs/protocol/Makefile.in
Removing include/osmocom/gsm/Makefile
Removing include/osmocom/gsm/Makefile.in
Removing include/osmocom/gsm/gsm0503.h
Removing include/osmocom/gsm/protocol/Makefile
Removing include/osmocom/gsm/protocol/Makefile.in
Removing include/osmocom/isdn/Makefile
Removing include/osmocom/isdn/Makefile.in
Removing include/osmocom/sim/Makefile
Removing include/osmocom/sim/Makefile.in
Removing include/osmocom/usb/Makefile
Removing include/osmocom/usb/Makefile.in
Removing include/osmocom/vty/Makefile
Removing include/osmocom/vty/Makefile.in
Removing install-sh
Removing libosmocodec.pc
Removing libosmocoding.pc
Removing libosmocore.pc
Removing libosmoctrl.pc
Removing libosmogb.pc
Removing libosmogsm.pc
Removing libosmoisdn.pc
Removing libosmosim.pc
Removing libosmousb.pc
Removing libosmovty.pc
Removing libtool
Removing ltmain.sh
Removing m4/libtool.m4
Removing m4/ltoptions.m4
Removing m4/ltsugar.m4
Removing m4/ltversion.m4
Removing m4/lt~obsolete.m4
Removing missing
Removing src/Makefile
Removing src/Makefile.in
Removing src/codec/.deps/
Removing src/codec/.libs/
Removing src/codec/Makefile
Removing src/codec/Makefile.in
Removing src/codec/ecu.lo
Removing src/codec/ecu_fr.lo
Removing src/codec/ecu_fr_old.lo
Removing src/codec/gsm610.lo
Removing src/codec/gsm620.lo
Removing src/codec/gsm660.lo
Removing src/codec/gsm690.lo
Removing src/codec/hr_sid_class.lo
Removing src/codec/libosmocodec.la
Removing src/coding/.deps/
Removing src/coding/.libs/
Removing src/coding/Makefile
Removing src/coding/Makefile.in
Removing src/coding/gsm0503_amr_dtx.lo
Removing src/coding/gsm0503_coding.lo
Removing src/coding/gsm0503_interleaving.lo
Removing src/coding/gsm0503_mapping.lo
Removing src/coding/gsm0503_parity.lo
Removing src/coding/gsm0503_tables.lo
Removing src/coding/libosmocoding.la
Removing src/core/.deps/
Removing src/core/.libs/
Removing src/core/Makefile
Removing src/core/Makefile.in
Removing src/core/application.lo
Removing src/core/backtrace.lo
Removing src/core/base64.lo
Removing src/core/bitcomp.lo
Removing src/core/bits.lo
Removing src/core/bitvec.lo
Removing src/core/context.lo
Removing src/core/conv.lo
Removing src/core/conv_acc.lo
Removing src/core/conv_acc_generic.lo
Removing src/core/conv_acc_sse.lo
Removing src/core/conv_acc_sse_avx.lo
Removing src/core/counter.lo
Removing src/core/crc16.lo
Removing src/core/crc16gen.c
Removing src/core/crc16gen.lo
Removing src/core/crc32gen.c
Removing src/core/crc32gen.lo
Removing src/core/crc64gen.c
Removing src/core/crc64gen.lo
Removing src/core/crc8gen.c
Removing src/core/crc8gen.lo
Removing src/core/exec.lo
Removing src/core/fsm.lo
Removing src/core/gsmtap_util.lo
Removing src/core/isdnhdlc.lo
Removing src/core/it_q.lo
Removing src/core/libosmocore.la
Removing src/core/logging.lo
Removing src/core/logging_gsmtap.lo
Removing src/core/logging_syslog.lo
Removing src/core/loggingrb.lo
Removing src/core/macaddr.lo
Removing src/core/mnl.lo
Removing src/core/msgb.lo
Removing src/core/msgfile.lo
Removing src/core/netdev.lo
Removing src/core/netns.lo
Removing src/core/osmo_io.lo
Removing src/core/osmo_io_poll.lo
Removing src/core/osmo_io_uring.lo
Removing src/core/panic.lo
Removing src/core/plugin.lo
Removing src/core/prbs.lo
Removing src/core/prim.lo
Removing src/core/rate_ctr.lo
Removing src/core/rbtree.lo
Removing src/core/select.lo
Removing src/core/sercomm.lo
Removing src/core/serial.lo
Removing src/core/signal.lo
Removing src/core/sockaddr_str.lo
Removing src/core/socket.lo
Removing src/core/soft_uart.lo
Removing src/core/stat_item.lo
Removing src/core/stats.lo
Removing src/core/stats_statsd.lo
Removing src/core/stats_tcp.lo
Removing src/core/strrb.lo
Removing src/core/tdef.lo
Removing src/core/thread.lo
Removing src/core/time_cc.lo
Removing src/core/timer.lo
Removing src/core/timer_clockgettime.lo
Removing src/core/timer_gettimeofday.lo
Removing src/core/tun.lo
Removing src/core/use_count.lo
Removing src/core/utils.lo
Removing src/core/write_queue.lo
Removing src/ctrl/.deps/
Removing src/ctrl/.libs/
Removing src/ctrl/Makefile
Removing src/ctrl/Makefile.in
Removing src/ctrl/control_cmd.lo
Removing src/ctrl/control_if.lo
Removing src/ctrl/control_vty.lo
Removing src/ctrl/fsm_ctrl_commands.lo
Removing src/ctrl/libosmoctrl.la
Removing src/gb/.deps/
Removing src/gb/.libs/
Removing src/gb/Makefile
Removing src/gb/Makefile.in
Removing src/gb/bssgp_bvc_fsm.lo
Removing src/gb/common_vty.lo
Removing src/gb/frame_relay.lo
Removing src/gb/gprs_bssgp.lo
Removing src/gb/gprs_bssgp2.lo
Removing src/gb/gprs_bssgp_bss.lo
Removing src/gb/gprs_bssgp_rim.lo
Removing src/gb/gprs_bssgp_util.lo
Removing src/gb/gprs_bssgp_vty.lo
Removing src/gb/gprs_ns.lo
Removing src/gb/gprs_ns2.lo
Removing src/gb/gprs_ns2_fr.lo
Removing src/gb/gprs_ns2_frgre.lo
Removing src/gb/gprs_ns2_message.lo
Removing src/gb/gprs_ns2_sns.lo
Removing src/gb/gprs_ns2_udp.lo
Removing src/gb/gprs_ns2_vc_fsm.lo
Removing src/gb/gprs_ns2_vty.lo
Removing src/gb/gprs_ns_frgre.lo
Removing src/gb/gprs_ns_sns.lo
Removing src/gb/gprs_ns_vty.lo
Removing src/gb/libosmogb-test.la
Removing src/gb/libosmogb.la
Removing src/gsm/.deps/
Removing src/gsm/.libs/
Removing src/gsm/Makefile
Removing src/gsm/Makefile.in
Removing src/gsm/a5.lo
Removing src/gsm/abis_nm.lo
Removing src/gsm/apn.lo
Removing src/gsm/auth_comp128v1.lo
Removing src/gsm/auth_comp128v23.lo
Removing src/gsm/auth_core.lo
Removing src/gsm/auth_milenage.lo
Removing src/gsm/auth_tuak.lo
Removing src/gsm/auth_xor.lo
Removing src/gsm/auth_xor_2g.lo
Removing src/gsm/bsslap.lo
Removing src/gsm/bssmap_le.lo
Removing src/gsm/bts_features.lo
Removing src/gsm/cbsp.lo
Removing src/gsm/comp128.lo
Removing src/gsm/comp128v23.lo
Removing src/gsm/gad.lo
Removing src/gsm/gan.lo
Removing src/gsm/gea.lo
Removing src/gsm/gprs_cipher_core.lo
Removing src/gsm/gprs_gea.lo
Removing src/gsm/gprs_rlc.lo
Removing src/gsm/gsm0341.lo
Removing src/gsm/gsm0411_smc.lo
Removing src/gsm/gsm0411_smr.lo
Removing src/gsm/gsm0411_utils.lo
Removing src/gsm/gsm0414.lo
Removing src/gsm/gsm0480.lo
Removing src/gsm/gsm0502.lo
Removing src/gsm/gsm0503_conv.c
Removing src/gsm/gsm0503_conv.lo
Removing src/gsm/gsm0808.lo
Removing src/gsm/gsm0808_utils.lo
Removing src/gsm/gsm23003.lo
Removing src/gsm/gsm23236.lo
Removing src/gsm/gsm29118.lo
Removing src/gsm/gsm29205.lo
Removing src/gsm/gsm44021.lo
Removing src/gsm/gsm44068.lo
Removing src/gsm/gsm48.lo
Removing src/gsm/gsm48049.lo
Removing src/gsm/gsm48_arfcn_range_encode.lo
Removing src/gsm/gsm48_ie.lo
Removing src/gsm/gsm48_rest_octets.lo
Removing src/gsm/gsm_04_08_gprs.lo
Removing src/gsm/gsm_utils.lo
Removing src/gsm/gsup.lo
Removing src/gsm/gsup_sms.lo
Removing src/gsm/ipa.lo
Removing src/gsm/iuup.lo
Removing src/gsm/kasumi.lo
Removing src/gsm/kdf.lo
Removing src/gsm/kdf/.deps/
Removing src/gsm/lapdm.lo
Removing src/gsm/libgsmint.la
Removing src/gsm/libosmogsm.la
Removing src/gsm/milenage/.deps/
Removing src/gsm/milenage/.dirstamp
Removing src/gsm/milenage/.libs/
Removing src/gsm/milenage/aes-encblock.lo
Removing src/gsm/milenage/aes-internal-enc.lo
Removing src/gsm/milenage/aes-internal.lo
Removing src/gsm/milenage/milenage.lo
Removing src/gsm/mncc.lo
Removing src/gsm/oap.lo
Removing src/gsm/oap_client.lo
Removing src/gsm/rlp.lo
Removing src/gsm/rsl.lo
Removing src/gsm/rxlev_stat.lo
Removing src/gsm/sysinfo.lo
Removing src/gsm/tlv_parser.lo
Removing src/gsm/tuak/.deps/
Removing src/gsm/tuak/.dirstamp
Removing src/gsm/tuak/.libs/
Removing src/gsm/tuak/KeccakP-1600-3gpp.lo
Removing src/gsm/tuak/tuak.lo
Removing src/isdn/.deps/
Removing src/isdn/.libs/
Removing src/isdn/Makefile
Removing src/isdn/Makefile.in
Removing src/isdn/i460_mux.lo
Removing src/isdn/lapd_core.lo
Removing src/isdn/libisdnint.la
Removing src/isdn/libosmoisdn.la
Removing src/isdn/v110.lo
Removing src/isdn/v110_ta.lo
Removing src/pseudotalloc/.deps/
Removing src/pseudotalloc/Makefile
Removing src/pseudotalloc/Makefile.in
Removing src/sim/.deps/
Removing src/sim/.libs/
Removing src/sim/Makefile
Removing src/sim/Makefile.in
Removing src/sim/card_fs_hpsim.lo
Removing src/sim/card_fs_isim.lo
Removing src/sim/card_fs_sim.lo
Removing src/sim/card_fs_tetra.lo
Removing src/sim/card_fs_uicc.lo
Removing src/sim/card_fs_usim.lo
Removing src/sim/class_tables.lo
Removing src/sim/core.lo
Removing src/sim/libosmosim.la
Removing src/sim/reader.lo
Removing src/sim/reader_pcsc.lo
Removing src/usb/.deps/
Removing src/usb/.libs/
Removing src/usb/Makefile
Removing src/usb/Makefile.in
Removing src/usb/libosmousb.la
Removing src/usb/osmo_libusb.lo
Removing src/vty/.deps/
Removing src/vty/.libs/
Removing src/vty/Makefile
Removing src/vty/Makefile.in
Removing src/vty/buffer.lo
Removing src/vty/command.lo
Removing src/vty/cpu_sched_vty.lo
Removing src/vty/fsm_vty.lo
Removing src/vty/libosmovty.la
Removing src/vty/logging_vty.lo
Removing src/vty/stats_vty.lo
Removing src/vty/talloc_ctx_vty.lo
Removing src/vty/tdef_vty.lo
Removing src/vty/telnet_interface.lo
Removing src/vty/utils.lo
Removing src/vty/vector.lo
Removing src/vty/vty.lo
Removing stamp-h1
Removing tapset/Makefile
Removing tapset/Makefile.in
Removing tests/.deps/
Removing tests/Makefile
Removing tests/Makefile.in
Removing tests/a5/.deps/
Removing tests/abis/.deps/
Removing tests/atconfig
Removing tests/atlocal
Removing tests/auth/.deps/
Removing tests/base64/.deps/
Removing tests/bitgen/.deps/
Removing tests/bits/.deps/
Removing tests/bitvec/.deps/
Removing tests/bsslap/.deps/
Removing tests/bssmap_le/.deps/
Removing tests/codec/.deps/
Removing tests/coding/.deps/
Removing tests/comp128/.deps/
Removing tests/context/.deps/
Removing tests/conv/.deps/
Removing tests/conv/gsm0503_test_vectors.c
Removing tests/ctrl/.deps/
Removing tests/dtx/.deps/
Removing tests/endian/.deps/
Removing tests/exec/.deps/
Removing tests/fr/.deps/
Removing tests/fsm/.deps/
Removing tests/gad/.deps/
Removing tests/gb/.deps/
Removing tests/gea/.deps/
Removing tests/gprs/.deps/
Removing tests/gsm0408/.deps/
Removing tests/gsm0502/.deps/
Removing tests/gsm0808/.deps/
Removing tests/gsm23003/.deps/
Removing tests/gsm23236/.deps/
Removing tests/gsm29205/.deps/
Removing tests/gsm44021/.deps/
Removing tests/gsm48/.deps/
Removing tests/gsup/.deps/
Removing tests/i460_mux/.deps/
Removing tests/it_q/.deps/
Removing tests/iuup/.deps/
Removing tests/jhash/.deps/
Removing tests/kasumi/.deps/
Removing tests/lapd/.deps/
Removing tests/logging/.deps/
Removing tests/loggingrb/.deps/
Removing tests/msgb/.deps/
Removing tests/msgfile/.deps/
Removing tests/oap/.deps/
Removing tests/osmo_io/.deps/
Removing tests/prbs/.deps/
Removing tests/rlp/.deps/
Removing tests/sercomm/.deps/
Removing tests/sim/.deps/
Removing tests/sms/.deps/
Removing tests/smscb/.deps/
Removing tests/sockaddr_str/.deps/
Removing tests/socket/.deps/
Removing tests/soft_uart/.deps/
Removing tests/stats/.deps/
Removing tests/strrb/.deps/
Removing tests/tdef/.deps/
Removing tests/time_cc/.deps/
Removing tests/timer/.deps/
Removing tests/tlv/.deps/
Removing tests/use_count/.deps/
Removing tests/ussd/.deps/
Removing tests/utils/.deps/
Removing tests/v110/.deps/
Removing tests/vty/.deps/
Removing tests/write_queue/.deps/
Removing utils/.deps/
Removing utils/.libs/
Removing utils/Makefile
Removing utils/Makefile.in
Removing utils/__pycache__/
Removing utils/gsmtap-logsend.o
Removing utils/osmo-aka-verify
Removing utils/osmo-aka-verify.o
Removing utils/osmo-arfcn
Removing utils/osmo-arfcn.o
Removing utils/osmo-auc-gen
Removing utils/osmo-auc-gen.o
Removing utils/osmo-config-merge
Removing utils/osmo-config-merge.o
Removing utils/osmo-gsmtap-logsend
Removing utils/osmo-ns-dummy
Removing utils/osmo-ns-dummy-vty.o
Removing utils/osmo-ns-dummy.o
Removing utils/osmo-sim-test
Removing utils/osmo-stat-dummy/.deps/
Removing utils/osmo-stat-dummy/Makefile
Removing utils/osmo-stat-dummy/Makefile.in
Removing utils/osmo_sim_test-osmo-sim-test.o
+ git_clean /build/deps/osmo-gsm-manuals
+ repos=/build/deps/osmo-gsm-manuals
+ [ ! -d /build/deps/osmo-gsm-manuals ]
+ [ ! -d /build/deps/osmo-gsm-manuals/.git ]
+ git -C /build/deps/osmo-gsm-manuals checkout -f HEAD
+ git -C /build/deps/osmo-gsm-manuals clean -dxf
Removing .version
Removing Makefile
Removing Makefile.in
Removing aclocal.m4
Removing autom4te.cache/
Removing compile
Removing config.guess
Removing config.log
Removing config.status
Removing config.sub
Removing configure
Removing install-sh
Removing libtool
Removing ltmain.sh
Removing missing
Removing osmo-gsm-manuals.pc
Removing tests/Makefile
Removing tests/Makefile.in
Removing tests/build
Removing tests/common
Removing tests/generated/
Removing tests/test-usermanual.adoc
Removing tests/test-usermanual.pdf
Removing tests/test-usermanual__1.svg
Removing tests/test-usermanual__10.svg
Removing tests/test-usermanual__11.svg
Removing tests/test-usermanual__12.svg
Removing tests/test-usermanual__13.svg
Removing tests/test-usermanual__14.svg
Removing tests/test-usermanual__15.svg
Removing tests/test-usermanual__16.svg
Removing tests/test-usermanual__17.svg
Removing tests/test-usermanual__18.svg
Removing tests/test-usermanual__19.svg
Removing tests/test-usermanual__2.svg
Removing tests/test-usermanual__20.svg
Removing tests/test-usermanual__21.svg
Removing tests/test-usermanual__22.svg
Removing tests/test-usermanual__23.svg
Removing tests/test-usermanual__24.svg
Removing tests/test-usermanual__25.svg
Removing tests/test-usermanual__26.svg
Removing tests/test-usermanual__27.svg
Removing tests/test-usermanual__28.svg
Removing tests/test-usermanual__29.svg
Removing tests/test-usermanual__3.svg
Removing tests/test-usermanual__30.svg
Removing tests/test-usermanual__31.svg
Removing tests/test-usermanual__32.svg
Removing tests/test-usermanual__33.svg
Removing tests/test-usermanual__34.svg
Removing tests/test-usermanual__35.svg
Removing tests/test-usermanual__36.svg
Removing tests/test-usermanual__37.svg
Removing tests/test-usermanual__38.svg
Removing tests/test-usermanual__39.svg
Removing tests/test-usermanual__4.svg
Removing tests/test-usermanual__40.svg
Removing tests/test-usermanual__41.svg
Removing tests/test-usermanual__42.svg
Removing tests/test-usermanual__43.svg
Removing tests/test-usermanual__44.svg
Removing tests/test-usermanual__45.svg
Removing tests/test-usermanual__46.svg
Removing tests/test-usermanual__47.svg
Removing tests/test-usermanual__48.svg
Removing tests/test-usermanual__49.svg
Removing tests/test-usermanual__5.svg
Removing tests/test-usermanual__50.svg
Removing tests/test-usermanual__51.svg
Removing tests/test-usermanual__52.svg
Removing tests/test-usermanual__53.svg
Removing tests/test-usermanual__54.svg
Removing tests/test-usermanual__55.svg
Removing tests/test-usermanual__56.svg
Removing tests/test-usermanual__57.svg
Removing tests/test-usermanual__58.svg
Removing tests/test-usermanual__59.svg
Removing tests/test-usermanual__6.svg
Removing tests/test-usermanual__60.svg
Removing tests/test-usermanual__61.svg
Removing tests/test-usermanual__62.svg
Removing tests/test-usermanual__63.svg
Removing tests/test-usermanual__64.svg
Removing tests/test-usermanual__65.svg
Removing tests/test-usermanual__7.svg
Removing tests/test-usermanual__8.svg
Removing tests/test-usermanual__9.svg
Removing tests/test-vty-reference.pdf
Removing tests/test2-vty-reference.pdf
+ [ -d layer1-headers ]
[osmocom-master] $ /bin/sh -xe /tmp/jenkins880655558941964368.sh
+ [ False != True ]
+ rm -rf /home/osmocom-build/jenkins/workspace/master-osmo-smlc/a1/default/a2/default/a3/default/a4/default/label/osmocom-master
+ mkdir -p /home/osmocom-build/jenkins/workspace/master-osmo-smlc/a1/default/a2/default/a3/default/a4/default/label/osmocom-master
$ ssh-agent -k
unset SSH_AUTH_SOCK;
unset SSH_AGENT_PID;
echo Agent pid 2716673 killed;
[ssh-agent] Stopped.
Archiving artifacts
‘**/core’ doesn’t match anything: ‘**’ exists but not ‘**/core’
No artifacts found that match the file pattern "**/core, **/testsuite.log, **/workspace.tar.xz, **/app-release.apk". Configuration error?
Finished: SUCCESS
![[Jenkins]](/jenkins/static/b68c8964/images/svgs/logo.svg){kind=logo}
