Failed
gprs:trx-sysmocell5000+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_trx-sysmocell5000+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=29560): Process ended prematurely: osmo-stp_10.42.42.5(pid=29560) [trial-2387↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29560)]
Standard Output
---------------------------------------------- trial-2387 gprs:trx-sysmocell5000+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 09:04:56.093726 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 09:04:56.105101 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x bts (candidates: 1) 09:04:56.245167 tst cs_paging_gprs_active.py: using LAC 32902 09:04:56.361973 tst cs_paging_gprs_active.py: using RAC 7 09:04:56.479513 tst cs_paging_gprs_active.py: using CellId 32902 09:04:56.598649 tst cs_paging_gprs_active.py: using BVCI 32903 09:04:56.621577 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 09:04:56.632599 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 09:04:56.643374 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 09:04:56.654115 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 09:04:56.664989 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 09:04:56.675928 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 09:04:56.687234 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 09:04:56.698159 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 09:04:56.709196 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x modem (candidates: 4) 09:04:56.830518 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x modem (candidates: 4) 09:04:57.107006 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 09:04:57.231579 run iperf3-srv_10.42.42.10: Starting iperf3-srv 09:04:57.538875 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29547): Launched 09:04:57.793520 run iperf3-srv_10.42.42.10(pid=29548): Launched 09:04:57.974229 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 09:04:58.098347 run iperf3-srv_10.42.42.10: Starting iperf3-srv 09:04:58.403917 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29549): Launched 09:04:58.658383 run iperf3-srv_10.42.42.10(pid=29550): Launched 09:04:58.838844 tst cs_paging_gprs_active.py:38: start network... 09:04:58.962595 run osmo-hlr_10.42.42.2: Starting osmo-hlr 09:04:59.429013 run create_hlr_db(pid=29551): Launched 09:04:59.600467 bus /gobi_6: Setting Powered False 09:05:00.623353 run create_hlr_db(pid=29551): Terminated: ok {rc=0} 09:05:01.079604 run pcap-recorder_any(filters='host 10.42.42.2')(pid=29553): Launched 09:05:01.417079 run osmo-hlr_10.42.42.2(pid=29554): Launched 09:05:01.661972 run osmo-stp_10.42.42.5: Starting osmo-stp 09:05:02.320468 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=29559): Launched 09:05:02.618580 run osmo-stp_10.42.42.5(pid=29560): Launched 09:05:02.728225 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 09:05:03.243824 run pcap-recorder_any(filters='host 10.42.42.6')(pid=29562): Launched 09:05:03.350194 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 09:05:03.608302 run patchelf(pid=29563): Launched 09:05:03.782840 run osmo-stp_10.42.42.5(pid=29560): ERR: Terminated: ERROR {rc=1} [trial-2387↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29560)] 09:05:03.910202 run osmo-stp_10.42.42.5(pid=29560): stdout: | (launched: 2022-12-13_09:05:02.471385) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 09:05:04.037663 run osmo-stp_10.42.42.5(pid=29560): stderr: | �[0;m�[38;5;43m20221213090502641 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213090502641 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213090502642 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213090502642 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213090502642 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213090502642 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213090502642 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 09:05:04.161143 run osmo-stp_10.42.42.5(pid=29560): stdout: | (launched: 2022-12-13_09:05:02.471385) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 09:05:04.283563 run osmo-stp_10.42.42.5(pid=29560): stderr: | �[0;m�[38;5;43m20221213090502641 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213090502641 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213090502642 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213090502642 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213090502642 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213090502642 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213090502642 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 09:05:04.425703 run patchelf(pid=29563): Terminating (SIGINT) 09:05:04.592444 run patchelf(pid=29563): Terminated: ok {rc=0} 09:05:04.623090 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=29560): Process ended prematurely: osmo-stp_10.42.42.5(pid=29560) [trial-2387↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29560)] [trial-2387↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 09:05:04.632298 tst cs_paging_gprs_active.py:38: Test FAILED (8.6 sec) 09:05:04.691952 run osmo-hlr_10.42.42.2(pid=29554): ERR: Terminated: ERROR {rc=237} [trial-2387↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=29554)] 09:05:04.740821 run osmo-hlr_10.42.42.2(pid=29554): stdout: | (launched: 2022-12-13_09:05:01.244747) 09:05:04.790140 run osmo-hlr_10.42.42.2(pid=29554): stderr: | �[0;m�[1;31m20221213090501596 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213090501596 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213090501596 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213090501597 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213090501597 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213090501597 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213090501615 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2387/run.2022-12-13_08-32-52/gprs:trx-sysmocell5000+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213090501627 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213090501628 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213090501628 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 09:05:04.832689 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29547): Terminating (SIGTERM) 09:05:04.872521 run iperf3-srv_10.42.42.10(pid=29548): Terminating (SIGTERM) 09:05:04.912593 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29549): Terminating (SIGTERM) 09:05:04.952175 run iperf3-srv_10.42.42.10(pid=29550): Terminating (SIGTERM) 09:05:04.991981 run pcap-recorder_any(filters='host 10.42.42.2')(pid=29553): Terminating (SIGTERM) 09:05:05.031677 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=29559): Terminating (SIGTERM) 09:05:05.071474 run pcap-recorder_any(filters='host 10.42.42.6')(pid=29562): Terminating (SIGTERM) 09:05:05.080602 --- ParallelTerminationStrategy: PID 29547 died... 09:05:05.134215 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29547): Terminated: ok {rc=0} 09:05:05.143710 --- ParallelTerminationStrategy: PID 29548 died... 09:05:05.196685 run iperf3-srv_10.42.42.10(pid=29548): Terminated {rc=256} 09:05:05.206127 --- ParallelTerminationStrategy: PID 29549 died... 09:05:05.259563 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29549): Terminated: ok {rc=0} 09:05:05.269029 --- ParallelTerminationStrategy: PID 29550 died... 09:05:05.321924 run iperf3-srv_10.42.42.10(pid=29550): Terminated {rc=256} 09:05:05.331296 --- ParallelTerminationStrategy: PID 29553 died... 09:05:05.384075 run pcap-recorder_any(filters='host 10.42.42.2')(pid=29553): Terminated: ok {rc=0} 09:05:05.393913 --- ParallelTerminationStrategy: PID 29559 died... 09:05:05.446906 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=29559): Terminated: ok {rc=0} 09:05:05.456196 --- ParallelTerminationStrategy: PID 29562 died... 09:05:05.509764 run pcap-recorder_any(filters='host 10.42.42.6')(pid=29562): Terminated: ok {rc=0} 09:05:05.596876 bus /gobi_0: Setting Powered False 09:05:06.699799 bus /gobi_0: Setting Powered False 09:05:07.811346 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=29560): Process ended prematurely: osmo-stp_10.42.42.5(pid=29560) [trial-2387↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29560)]