Skipping 200 KB..
Full Loga2x: executing: "dblatex" -t pdf -p "/etc/asciidoc/dblatex/asciidoc-dblatex.xsl" -s "/etc/asciidoc/dblatex/asciidoc-dblatex.sty" --config /opt/osmo-gsm-manuals/build/dblatex_config.xml -s /opt/osmo-gsm-manuals/build/custom-dblatex-draft.sty -P draft.mode=yes -P draft.watermark=0 -V "/build/osmo-gbproxy-0.5.1/_build/sub/doc/manuals/osmogbproxy-usermanual.xml"
Build the book set list...
xsltproc -o doclist.txt --xinclude --xincludestyle doclist.xsl /build/osmo-gbproxy-0.5.1/_build/sub/doc/manuals/osmogbproxy-usermanual.xml
Build the listings...
xsltproc -o listings.xml --xinclude --xincludestyle --param current.dir '/build/osmo-gbproxy-0.5.1/_build/sub/doc/manuals' /usr/share/dblatex/xsl/common/mklistings.xsl /build/osmo-gbproxy-0.5.1/_build/sub/doc/manuals/osmogbproxy-usermanual.xml
xsltproc -o osmogbproxy-usermanual.rtex --xinclude --xincludestyle --param listings.xml '/tmp/tmp7ythfpnu/listings.xml' --param current.dir '/build/osmo-gbproxy-0.5.1/_build/sub/doc/manuals' /tmp/tmp7ythfpnu/custom.xsl /build/osmo-gbproxy-0.5.1/_build/sub/doc/manuals/osmogbproxy-usermanual.xml
XSLT stylesheets DocBook - LaTeX 2e (0.3.12)
===================================================
Error: no ID for constraint linkend: ns:nsvc_packets:in.
XRef to nonexistent id: ns:nsvc_packets:in
Error: no ID for constraint linkend: ns:nsvc_packets:out.
XRef to nonexistent id: ns:nsvc_packets:out
Error: no ID for constraint linkend: ns:nsvc_packets:out:drop.
XRef to nonexistent id: ns:nsvc_packets:out:drop
Error: no ID for constraint linkend: ns:nsvc_bytes:in.
XRef to nonexistent id: ns:nsvc_bytes:in
Error: no ID for constraint linkend: ns:nsvc_bytes:out.
XRef to nonexistent id: ns:nsvc_bytes:out
Error: no ID for constraint linkend: ns:nsvc_bytes:out:drop.
XRef to nonexistent id: ns:nsvc_bytes:out:drop
Error: no ID for constraint linkend: ns:nsvc_blocked.
XRef to nonexistent id: ns:nsvc_blocked
Error: no ID for constraint linkend: ns:nsvc_unblocked.
XRef to nonexistent id: ns:nsvc_unblocked
Error: no ID for constraint linkend: ns:nsvc_dead.
XRef to nonexistent id: ns:nsvc_dead
Error: no ID for constraint linkend: ns:nsvc_replaced.
XRef to nonexistent id: ns:nsvc_replaced
Error: no ID for constraint linkend: ns:nsvc_nsei-chg.
XRef to nonexistent id: ns:nsvc_nsei-chg
Error: no ID for constraint linkend: ns:nsvc_inv-nsvci.
XRef to nonexistent id: ns:nsvc_inv-nsvci
Error: no ID for constraint linkend: ns:nsvc_inv-nsei.
XRef to nonexistent id: ns:nsvc_inv-nsei
Error: no ID for constraint linkend: ns:nsvc_lost:alive.
XRef to nonexistent id: ns:nsvc_lost:alive
Error: no ID for constraint linkend: ns:nsvc_lost:reset.
XRef to nonexistent id: ns:nsvc_lost:reset
Error: no ID for constraint linkend: gbproxy:peer_blocked.
XRef to nonexistent id: gbproxy:peer_blocked
Error: no ID for constraint linkend: gbproxy:peer_unblocked.
XRef to nonexistent id: gbproxy:peer_unblocked
Error: no ID for constraint linkend: gbproxy:peer_dropped.
XRef to nonexistent id: gbproxy:peer_dropped
Error: no ID for constraint linkend: gbproxy:peer_inv-nsei.
XRef to nonexistent id: gbproxy:peer_inv-nsei
Error: no ID for constraint linkend: gbproxy:peer_tx-err.
XRef to nonexistent id: gbproxy:peer_tx-err
Error: no ID for constraint linkend: gbproxy:global_inv-bvci.
XRef to nonexistent id: gbproxy:global_inv-bvci
Error: no ID for constraint linkend: gbproxy:global_inv-lai.
XRef to nonexistent id: gbproxy:global_inv-lai
Error: no ID for constraint linkend: gbproxy:global_inv-rai.
XRef to nonexistent id: gbproxy:global_inv-rai
Error: no ID for constraint linkend: gbproxy:global_inv-nsei.
XRef to nonexistent id: gbproxy:global_inv-nsei
Error: no ID for constraint linkend: gbproxy:global_proto-err:bss.
XRef to nonexistent id: gbproxy:global_proto-err:bss
Error: no ID for constraint linkend: gbproxy:global_proto-err:sgsn.
XRef to nonexistent id: gbproxy:global_proto-err:sgsn
Error: no ID for constraint linkend: gbproxy:global_not-supp:bss.
XRef to nonexistent id: gbproxy:global_not-supp:bss
Error: no ID for constraint linkend: gbproxy:global_not-supp:sgsn.
XRef to nonexistent id: gbproxy:global_not-supp:sgsn
Error: no ID for constraint linkend: gbproxy:global_restart:sgsn.
XRef to nonexistent id: gbproxy:global_restart:sgsn
Error: no ID for constraint linkend: gbproxy:global_tx-err:sgsn.
XRef to nonexistent id: gbproxy:global_tx-err:sgsn
Error: no ID for constraint linkend: gbproxy:global_error.
XRef to nonexistent id: gbproxy:global_error
Error: no ID for constraint linkend: gbproxy:global_mod-peer-err.
XRef to nonexistent id: gbproxy:global_mod-peer-err
Error: no ID for constraint linkend: ns.nsvc_alive.delay.
XRef to nonexistent id: ns.nsvc_alive.delay
Error: no ID for constraint linkend: ns.bind_tx_backlog_length.
XRef to nonexistent id: ns.bind_tx_backlog_length
Error: no ID for constraint linkend: ieee-802.11.
XRef to nonexistent id: ieee-802.11
Section level > 6 not well supported for bibliodiv
Image 'dblatex' not found
rsvg-convert -a -f pdf -o fig0.pdf /build/osmo-gbproxy-0.5.1/_build/sub/doc/manuals/osmogbproxy-usermanual__1.svg
rsvg-convert -a -f pdf -o fig1.pdf /build/osmo-gbproxy-0.5.1/_build/sub/doc/manuals/osmogbproxy-usermanual__2.svg
rsvg-convert -a -f pdf -o fig2.pdf /build/osmo-gbproxy-0.5.1/_build/sub/doc/manuals/osmogbproxy-usermanual__3.svg
rsvg-convert -a -f pdf -o fig3.pdf /build/osmo-gbproxy-0.5.1/_build/sub/doc/manuals/osmogbproxy-usermanual__4.svg
rsvg-convert -a -f pdf -o fig4.pdf /build/osmo-gbproxy-0.5.1/_build/sub/doc/manuals/osmogbproxy-usermanual__5.svg
Cannot convert './common/images/wireshark-gsmtap-log.png' to pdf
rsvg-convert -a -f pdf -o fig5.pdf /build/osmo-gbproxy-0.5.1/_build/sub/doc/manuals/osmogbproxy-usermanual__6.svg
rsvg-convert -a -f pdf -o fig6.pdf /build/osmo-gbproxy-0.5.1/_build/sub/doc/manuals/osmogbproxy-usermanual__7.svg
rsvg-convert -a -f pdf -o fig7.pdf /build/osmo-gbproxy-0.5.1/_build/sub/doc/manuals/osmogbproxy-usermanual__8.svg
rsvg-convert -a -f pdf -o fig8.pdf /build/osmo-gbproxy-0.5.1/_build/sub/doc/manuals/osmogbproxy-usermanual__9.svg
rsvg-convert -a -f pdf -o fig9.pdf /build/osmo-gbproxy-0.5.1/_build/sub/doc/manuals/osmogbproxy-usermanual__10.svg
rsvg-convert -a -f pdf -o fig10.pdf /build/osmo-gbproxy-0.5.1/_build/sub/doc/manuals/osmogbproxy-usermanual__11.svg
rsvg-convert -a -f pdf -o fig11.pdf /build/osmo-gbproxy-0.5.1/_build/sub/doc/manuals/osmogbproxy-usermanual__12.svg
rsvg-convert -a -f pdf -o fig12.pdf /build/osmo-gbproxy-0.5.1/_build/sub/doc/manuals/osmogbproxy-usermanual__13.svg
rsvg-convert -a -f pdf -o fig13.pdf /build/osmo-gbproxy-0.5.1/_build/sub/doc/manuals/osmogbproxy-usermanual__14.svg
rsvg-convert -a -f pdf -o fig14.pdf /build/osmo-gbproxy-0.5.1/_build/sub/doc/manuals/osmogbproxy-usermanual__15.svg
Build osmogbproxy-usermanual.pdf
built-in module pdftex registered
building additional files...
checking if compiling is necessary...
the output file doesn't exist
pdflatex -interaction=batchmode osmogbproxy-usermanual.tex
running post-compilation scripts...
osmogbproxy-usermanual.aux MD5 checksum changed
osmogbproxy-usermanual.toc MD5 checksum changed
the /tmp/tmp7ythfpnu/osmogbproxy-usermanual.aux file has changed
pdflatex -interaction=batchmode osmogbproxy-usermanual.tex
running post-compilation scripts...
osmogbproxy-usermanual.aux MD5 checksum changed
the /tmp/tmp7ythfpnu/osmogbproxy-usermanual.aux file has changed but no re-run required?
no new compilation is needed
running last-compilation scripts...
'osmogbproxy-usermanual.pdf' successfully built
a2x: deleting /build/osmo-gbproxy-0.5.1/_build/sub/doc/manuals/osmogbproxy-usermanual.xml
make[4]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/doc/manuals'
make[4]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/doc'
make[4]: Nothing to be done for 'all-am'.
make[4]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/doc'
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/doc'
Making all in contrib
make[3]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/contrib'
Making all in systemd
make[4]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/contrib/systemd'
make[4]: Nothing to be done for 'all'.
make[4]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/contrib/systemd'
make[4]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/contrib'
make[4]: Nothing to be done for 'all-am'.
make[4]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/contrib'
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/contrib'
Making all in tests
make[3]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/tests'
make[4]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/tests'
make[4]: Nothing to be done for 'all-am'.
make[4]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/tests'
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/tests'
make[3]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub'
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub'
make[2]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub'
make[1]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub'
make[1]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub'
Making dvi in include
make[2]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/include'
Making dvi in osmocom
make[3]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/include/osmocom'
Making dvi in gbproxy
make[4]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/include/osmocom/gbproxy'
make[4]: Nothing to be done for 'dvi'.
make[4]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/include/osmocom/gbproxy'
make[4]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/include/osmocom'
make[4]: Nothing to be done for 'dvi-am'.
make[4]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/include/osmocom'
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/include/osmocom'
make[3]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/include'
make[3]: Nothing to be done for 'dvi-am'.
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/include'
make[2]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/include'
Making dvi in src
make[2]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/src'
make[2]: Nothing to be done for 'dvi'.
make[2]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/src'
Making dvi in doc
make[2]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/doc'
Making dvi in examples
make[3]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/doc/examples'
make[3]: Nothing to be done for 'dvi'.
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/doc/examples'
Making dvi in manuals
make[3]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/doc/manuals'
make[3]: Nothing to be done for 'dvi'.
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/doc/manuals'
make[3]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/doc'
make[3]: Nothing to be done for 'dvi-am'.
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/doc'
make[2]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/doc'
Making dvi in contrib
make[2]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/contrib'
Making dvi in systemd
make[3]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/contrib/systemd'
make[3]: Nothing to be done for 'dvi'.
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/contrib/systemd'
make[3]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/contrib'
make[3]: Nothing to be done for 'dvi-am'.
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/contrib'
make[2]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/contrib'
Making dvi in tests
make[2]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/tests'
make[3]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/tests'
make[3]: Nothing to be done for 'dvi-am'.
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/tests'
make[2]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/tests'
make[2]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub'
make[2]: Nothing to be done for 'dvi-am'.
make[2]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub'
make[1]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub'
make[1]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub'
make check-recursive
make[2]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub'
Making check in include
make[3]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/include'
Making check in osmocom
make[4]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/include/osmocom'
Making check in gbproxy
make[5]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/include/osmocom/gbproxy'
make[5]: Nothing to be done for 'check'.
make[5]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/include/osmocom/gbproxy'
make[5]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/include/osmocom'
make[5]: Nothing to be done for 'check-am'.
make[5]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/include/osmocom'
make[4]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/include/osmocom'
make[4]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/include'
make[4]: Nothing to be done for 'check-am'.
make[4]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/include'
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/include'
Making check in src
make[3]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/src'
make[3]: Nothing to be done for 'check'.
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/src'
Making check in doc
make[3]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/doc'
Making check in examples
make[4]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/doc/examples'
make[4]: Nothing to be done for 'check'.
make[4]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/doc/examples'
Making check in manuals
make[4]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/doc/manuals'
if [ -n "$ASCIIDOC_WARNINGS_CHECK" ]; then \
make osmogbproxy-usermanual.check; \
fi
make[5]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/doc/manuals'
if ! [ -f osmogbproxy-usermanual.adoc ]; then \
ln -s osmogbproxy-usermanual.adoc osmogbproxy-usermanual.adoc; \
fi
asciidoc -v -f /opt/osmo-gsm-manuals/build/mscgen-filter.conf -f /opt/osmo-gsm-manuals/build/diag-filter.conf -f /opt/osmo-gsm-manuals/build/docinfo-releaseinfo.conf -f /opt/osmo-gsm-manuals/build/graphviz-filter.conf -a srcdir='/build/osmo-gbproxy-0.5.1/_build/sub/../../doc/manuals' -a commondir='/opt/osmo-gsm-manuals/common' osmogbproxy-usermanual.adoc > osmogbproxy-usermanual.check 2>&1
touch osmogbproxy-usermanual.check
make[5]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/doc/manuals'
make[4]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/doc/manuals'
make[4]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/doc'
make[4]: Nothing to be done for 'check-am'.
make[4]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/doc'
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/doc'
Making check in contrib
make[3]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/contrib'
Making check in systemd
make[4]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/contrib/systemd'
make[4]: Nothing to be done for 'check'.
make[4]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/contrib/systemd'
make[4]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/contrib'
make[4]: Nothing to be done for 'check-am'.
make[4]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/contrib'
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/contrib'
Making check in tests
make[3]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/tests'
make[4]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/tests'
make check-local
make[5]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/tests'
/bin/bash '../../../tests/testsuite'
## ------------------------------ ##
## osmo-gbproxy 0.5.1 test suite. ##
## ------------------------------ ##
## ------------- ##
## Test results. ##
## ------------- ##
0 tests were successful.
make python-tests
make[6]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/tests'
make vty-test
make[7]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/tests'
make vty-python-test
make[8]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/tests'
osmotestvty.py -p /build/osmo-gbproxy-0.5.1/_build/sub/../.. -w /build/osmo-gbproxy-0.5.1/_build/sub -v
/usr/local/bin/osmotestvty.py:4: DeprecationWarning: pkg_resources is deprecated as an API. See https://setuptools.pypa.io/en/latest/pkg_resources.html
__import__('pkg_resources').run_script('osmopython==0.3.0', 'osmotestvty.py')
test_history (__main__.TestVTY.test_history) ... confpath /build/osmo-gbproxy-0.5.1/_build/sub/../.., workdir /build/osmo-gbproxy-0.5.1/_build/sub
Running tests for specific VTY commands
Launch: ./src/osmo-gbproxy -c /build/osmo-gbproxy-0.5.1/_build/sub/../../doc/examples/osmo-gbproxy/osmo-gbproxy.cfg from /build/osmo-gbproxy-0.5.1/_build/sub
Opening /dev/null
Launching: PWD=/build/osmo-gbproxy-0.5.1/_build/sub './src/osmo-gbproxy' '-c' '/build/osmo-gbproxy-0.5.1/_build/sub/../../doc/examples/osmo-gbproxy/osmo-gbproxy.cfg'
> ls -l /proc/26010/fd
total 0
lr-x------ 1 build build 64 Dec 6 21:16 0 -> pipe:[1188291336]
l-wx------ 1 build build 64 Dec 6 21:16 1 -> pipe:[1188291337]
l-wx------ 1 build build 64 Dec 6 21:16 2 -> pipe:[1188291338]
l-wx------ 1 build build 64 Dec 6 21:16 3 -> /dev/null
> ss -tn
State Recv-Q Send-Q Local Address:Port Peer Address:Port
> ss -tln
State Recv-Q Send-Q Local Address:Port Peer Address:Port
LISTEN 0 10 127.0.0.1:4246 0.0.0.0:*
LISTEN 0 10 127.0.0.1:4263 0.0.0.0:*
> ps xua | grep osmo
build 1 0.0 0.0 2592 1144 ? Ss 21:15 0:00 /usr/bin/timeout 30m /osmo-ci/scripts/wrapper_core_bt_on_error.sh /build/contrib/jenkins.sh
build 7 0.0 0.0 2680 1116 ? S 21:15 0:00 /bin/sh /osmo-ci/scripts/wrapper_core_bt_on_error.sh /build/contrib/jenkins.sh
build 23495 0.0 0.0 4068 3244 ? S 21:15 0:00 /bin/bash -c test -d osmo-gbproxy-0.5.1/_build || exit 0; \ dc_install_base=`CDPATH="${ZSH_VERSION+.}:" && cd osmo-gbproxy-0.5.1/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ && dc_destdir="${TMPDIR-/tmp}/am-dc-$$/" \ && am__cwd=`pwd` \ && CDPATH="${ZSH_VERSION+.}:" && cd osmo-gbproxy-0.5.1/_build/sub \ && ../../configure \ --with-systemdsystemunitdir=$dc_install_base/ \ --enable-werror --enable-external-tests --enable-manuals \ --srcdir=../.. --prefix="$dc_install_base" \ && make \ && make dvi \ && make check \ && make install \ && make installcheck \ && make uninstall \ && make distuninstallcheck_dir="$dc_install_base" \ distuninstallcheck \ && chmod -R a-w "$dc_install_base" \ && ({ \ (cd ../.. && umask 077 && mkdir "$dc_destdir") \ && make DESTDIR="$dc_destdir" install \ && make DESTDIR="$dc_destdir" uninstall \ && make DESTDIR="$dc_destdir" \ distuninstallcheck_dir="$dc_destdir" distuninstallcheck; \ } || { rm -rf "$dc_destdir"; exit 1; }) \ && rm -rf "$dc_destdir" \ && make dist \ && rm -rf osmo-gbproxy-0.5.1.tar.gz osmo-gbproxy-0.5.1.tar.bz2 \ && make distcleancheck \ && cd "$am__cwd" \ || exit 1
build 25784 0.0 0.0 4068 3208 ? S 21:15 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '2'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.4.1' && test -n '/build/osmo-gbproxy-0.5.1/_build/sub'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='include src doc contrib tests ' ;; \ *) list='include src doc contrib tests ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail"
build 25887 0.0 0.0 4068 3172 ? S 21:16 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '3'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.4.1' && test -n '/build/osmo-gbproxy-0.5.1/_build/sub/tests'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='' ;; \ *) list='' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail"
build 26010 61.5 0.0 35616 27888 ? S 21:16 0:00 /usr/bin/python3 /usr/local/bin/osmotestvty.py -p /build/osmo-gbproxy-0.5.1/_build/sub/../.. -w /build/osmo-gbproxy-0.5.1/_build/sub -v
build 26011 25.0 0.0 21474909564 18040 ? S 21:16 0:00 ./src/osmo-gbproxy -c /build/osmo-gbproxy-0.5.1/_build/sub/../../doc/examples/osmo-gbproxy/osmo-gbproxy.cfg
build 26018 0.0 0.0 2680 1152 ? S 21:16 0:00 /bin/sh -c ps xua | grep osmo
build 26020 0.0 0.0 3896 1884 ? S 21:16 0:00 grep osmo
ok
test_terminal_length (__main__.TestVTY.test_terminal_length) ... Socket: in 1 tries, connected to 127.0.0.1:4246 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 35234), raddr=('127.0.0.1', 4246)> (1 sockets open)
Socket: closing 127.0.0.1:4246 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 35234), raddr=('127.0.0.1', 4246)> (0 sockets open)
Terminating took 0.897s
Process returned code: 0
Launch: ./src/osmo-gbproxy -c /build/osmo-gbproxy-0.5.1/_build/sub/../../doc/examples/osmo-gbproxy/osmo-gbproxy.cfg from /build/osmo-gbproxy-0.5.1/_build/sub
Launching: PWD=/build/osmo-gbproxy-0.5.1/_build/sub './src/osmo-gbproxy' '-c' '/build/osmo-gbproxy-0.5.1/_build/sub/../../doc/examples/osmo-gbproxy/osmo-gbproxy.cfg'
> ls -l /proc/26010/fd
total 0
lr-x------ 1 build build 64 Dec 6 21:16 0 -> pipe:[1188291336]
l-wx------ 1 build build 64 Dec 6 21:16 1 -> pipe:[1188291337]
l-wx------ 1 build build 64 Dec 6 21:16 2 -> pipe:[1188291338]
l-wx------ 1 build build 64 Dec 6 21:16 3 -> /dev/null
> ss -tn
State Recv-Q Send-Q Local Address:Port Peer Address:Port
> ss -tln
State Recv-Q Send-Q Local Address:Port Peer Address:Port
LISTEN 0 10 127.0.0.1:4246 0.0.0.0:*
LISTEN 0 10 127.0.0.1:4263 0.0.0.0:*
> ps xua | grep osmo
build 1 0.0 0.0 2592 1144 ? Ss 21:15 0:00 /usr/bin/timeout 30m /osmo-ci/scripts/wrapper_core_bt_on_error.sh /build/contrib/jenkins.sh
build 7 0.0 0.0 2680 1116 ? S 21:15 0:00 /bin/sh /osmo-ci/scripts/wrapper_core_bt_on_error.sh /build/contrib/jenkins.sh
build 23495 0.0 0.0 4068 3244 ? S 21:15 0:00 /bin/bash -c test -d osmo-gbproxy-0.5.1/_build || exit 0; \ dc_install_base=`CDPATH="${ZSH_VERSION+.}:" && cd osmo-gbproxy-0.5.1/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ && dc_destdir="${TMPDIR-/tmp}/am-dc-$$/" \ && am__cwd=`pwd` \ && CDPATH="${ZSH_VERSION+.}:" && cd osmo-gbproxy-0.5.1/_build/sub \ && ../../configure \ --with-systemdsystemunitdir=$dc_install_base/ \ --enable-werror --enable-external-tests --enable-manuals \ --srcdir=../.. --prefix="$dc_install_base" \ && make \ && make dvi \ && make check \ && make install \ && make installcheck \ && make uninstall \ && make distuninstallcheck_dir="$dc_install_base" \ distuninstallcheck \ && chmod -R a-w "$dc_install_base" \ && ({ \ (cd ../.. && umask 077 && mkdir "$dc_destdir") \ && make DESTDIR="$dc_destdir" install \ && make DESTDIR="$dc_destdir" uninstall \ && make DESTDIR="$dc_destdir" \ distuninstallcheck_dir="$dc_destdir" distuninstallcheck; \ } || { rm -rf "$dc_destdir"; exit 1; }) \ && rm -rf "$dc_destdir" \ && make dist \ && rm -rf osmo-gbproxy-0.5.1.tar.gz osmo-gbproxy-0.5.1.tar.bz2 \ && make distcleancheck \ && cd "$am__cwd" \ || exit 1
build 25784 0.0 0.0 4068 3208 ? S 21:15 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '2'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.4.1' && test -n '/build/osmo-gbproxy-0.5.1/_build/sub'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='include src doc contrib tests ' ;; \ *) list='include src doc contrib tests ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail"
build 25887 0.0 0.0 4068 3172 ? S 21:16 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '3'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.4.1' && test -n '/build/osmo-gbproxy-0.5.1/_build/sub/tests'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='' ;; \ *) list='' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail"
build 26010 5.0 0.0 35616 27888 ? S 21:16 0:00 /usr/bin/python3 /usr/local/bin/osmotestvty.py -p /build/osmo-gbproxy-0.5.1/_build/sub/../.. -w /build/osmo-gbproxy-0.5.1/_build/sub -v
build 26022 0.0 0.0 21474909564 18072 ? S 21:16 0:00 ./src/osmo-gbproxy -c /build/osmo-gbproxy-0.5.1/_build/sub/../../doc/examples/osmo-gbproxy/osmo-gbproxy.cfg
build 26029 0.0 0.0 2680 1164 ? S 21:16 0:00 /bin/sh -c ps xua | grep osmo
build 26031 0.0 0.0 3896 1936 ? S 21:16 0:00 grep osmo
ok
test_unknown_command (__main__.TestVTY.test_unknown_command) ... Socket: in 1 tries, connected to 127.0.0.1:4246 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 35250), raddr=('127.0.0.1', 4246)> (1 sockets open)
Socket: closing 127.0.0.1:4246 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 35250), raddr=('127.0.0.1', 4246)> (0 sockets open)
Terminating took 0.897s
Process returned code: 0
Launch: ./src/osmo-gbproxy -c /build/osmo-gbproxy-0.5.1/_build/sub/../../doc/examples/osmo-gbproxy/osmo-gbproxy.cfg from /build/osmo-gbproxy-0.5.1/_build/sub
Launching: PWD=/build/osmo-gbproxy-0.5.1/_build/sub './src/osmo-gbproxy' '-c' '/build/osmo-gbproxy-0.5.1/_build/sub/../../doc/examples/osmo-gbproxy/osmo-gbproxy.cfg'
> ls -l /proc/26010/fd
total 0
lr-x------ 1 build build 64 Dec 6 21:16 0 -> pipe:[1188291336]
l-wx------ 1 build build 64 Dec 6 21:16 1 -> pipe:[1188291337]
l-wx------ 1 build build 64 Dec 6 21:16 2 -> pipe:[1188291338]
l-wx------ 1 build build 64 Dec 6 21:16 3 -> /dev/null
> ss -tn
State Recv-Q Send-Q Local Address:Port Peer Address:Port
> ss -tln
State Recv-Q Send-Q Local Address:Port Peer Address:Port
LISTEN 0 10 127.0.0.1:4246 0.0.0.0:*
LISTEN 0 10 127.0.0.1:4263 0.0.0.0:*
> ps xua | grep osmo
build 1 0.0 0.0 2592 1144 ? Ss 21:15 0:00 /usr/bin/timeout 30m /osmo-ci/scripts/wrapper_core_bt_on_error.sh /build/contrib/jenkins.sh
build 7 0.0 0.0 2680 1116 ? S 21:15 0:00 /bin/sh /osmo-ci/scripts/wrapper_core_bt_on_error.sh /build/contrib/jenkins.sh
build 23495 0.0 0.0 4068 3244 ? S 21:15 0:00 /bin/bash -c test -d osmo-gbproxy-0.5.1/_build || exit 0; \ dc_install_base=`CDPATH="${ZSH_VERSION+.}:" && cd osmo-gbproxy-0.5.1/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ && dc_destdir="${TMPDIR-/tmp}/am-dc-$$/" \ && am__cwd=`pwd` \ && CDPATH="${ZSH_VERSION+.}:" && cd osmo-gbproxy-0.5.1/_build/sub \ && ../../configure \ --with-systemdsystemunitdir=$dc_install_base/ \ --enable-werror --enable-external-tests --enable-manuals \ --srcdir=../.. --prefix="$dc_install_base" \ && make \ && make dvi \ && make check \ && make install \ && make installcheck \ && make uninstall \ && make distuninstallcheck_dir="$dc_install_base" \ distuninstallcheck \ && chmod -R a-w "$dc_install_base" \ && ({ \ (cd ../.. && umask 077 && mkdir "$dc_destdir") \ && make DESTDIR="$dc_destdir" install \ && make DESTDIR="$dc_destdir" uninstall \ && make DESTDIR="$dc_destdir" \ distuninstallcheck_dir="$dc_destdir" distuninstallcheck; \ } || { rm -rf "$dc_destdir"; exit 1; }) \ && rm -rf "$dc_destdir" \ && make dist \ && rm -rf osmo-gbproxy-0.5.1.tar.gz osmo-gbproxy-0.5.1.tar.bz2 \ && make distcleancheck \ && cd "$am__cwd" \ || exit 1
build 25784 0.0 0.0 4068 3208 ? S 21:15 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '2'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.4.1' && test -n '/build/osmo-gbproxy-0.5.1/_build/sub'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='include src doc contrib tests ' ;; \ *) list='include src doc contrib tests ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail"
build 25887 0.0 0.0 4068 3172 ? S 21:16 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '3'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.4.1' && test -n '/build/osmo-gbproxy-0.5.1/_build/sub/tests'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='' ;; \ *) list='' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail"
build 26010 2.6 0.0 35616 27892 ? S 21:16 0:00 /usr/bin/python3 /usr/local/bin/osmotestvty.py -p /build/osmo-gbproxy-0.5.1/_build/sub/../.. -w /build/osmo-gbproxy-0.5.1/_build/sub -v
build 26033 20.0 0.0 21474909564 20056 ? S 21:16 0:00 ./src/osmo-gbproxy -c /build/osmo-gbproxy-0.5.1/_build/sub/../../doc/examples/osmo-gbproxy/osmo-gbproxy.cfg
build 26040 0.0 0.0 2680 1084 ? S 21:16 0:00 /bin/sh -c ps xua | grep osmo
build 26042 0.0 0.0 3896 1944 ? S 21:16 0:00 grep osmo
ok
----------------------------------------------------------------------
Ran 3 tests in 4.387s
OK
Socket: in 1 tries, connected to 127.0.0.1:4246 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 35252), raddr=('127.0.0.1', 4246)> (1 sockets open)
Socket: closing 127.0.0.1:4246 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 35252), raddr=('127.0.0.1', 4246)> (0 sockets open)
Terminating took 0.897s
Process returned code: 0
osmotestconfig.py -p /build/osmo-gbproxy-0.5.1/_build/sub/../.. -w /build/osmo-gbproxy-0.5.1/_build/sub -v
/usr/local/bin/osmotestconfig.py:4: DeprecationWarning: pkg_resources is deprecated as an API. See https://setuptools.pypa.io/en/latest/pkg_resources.html
__import__('pkg_resources').run_script('osmopython==0.3.0', 'osmotestconfig.py')
Verifying src/osmo-gbproxy -c /build/osmo-gbproxy-0.5.1/_build/sub/../../doc/examples/osmo-gbproxy/osmo-gbproxy.cfg, test verify_doc
Opening /dev/null
Launching: PWD=/build/osmo-gbproxy-0.5.1/_build/sub 'src/osmo-gbproxy' '-c' '/build/osmo-gbproxy-0.5.1/_build/sub/../../doc/examples/osmo-gbproxy/osmo-gbproxy.cfg'
> ls -l /proc/26044/fd
total 0
lr-x------ 1 build build 64 Dec 6 21:16 0 -> pipe:[1188291336]
l-wx------ 1 build build 64 Dec 6 21:16 1 -> pipe:[1188291337]
l-wx------ 1 build build 64 Dec 6 21:16 2 -> pipe:[1188291338]
l-wx------ 1 build build 64 Dec 6 21:16 3 -> /dev/null
> ss -tn
State Recv-Q Send-Q Local Address:Port Peer Address:Port
> ss -tln
State Recv-Q Send-Q Local Address:Port Peer Address:Port
LISTEN 0 10 127.0.0.1:4246 0.0.0.0:*
LISTEN 0 10 127.0.0.1:4263 0.0.0.0:*
> ps xua | grep osmo
build 1 0.0 0.0 2592 1144 ? Ss 21:15 0:00 /usr/bin/timeout 30m /osmo-ci/scripts/wrapper_core_bt_on_error.sh /build/contrib/jenkins.sh
build 7 0.0 0.0 2680 1116 ? S 21:15 0:00 /bin/sh /osmo-ci/scripts/wrapper_core_bt_on_error.sh /build/contrib/jenkins.sh
build 23495 0.0 0.0 4068 3244 ? S 21:15 0:00 /bin/bash -c test -d osmo-gbproxy-0.5.1/_build || exit 0; \ dc_install_base=`CDPATH="${ZSH_VERSION+.}:" && cd osmo-gbproxy-0.5.1/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ && dc_destdir="${TMPDIR-/tmp}/am-dc-$$/" \ && am__cwd=`pwd` \ && CDPATH="${ZSH_VERSION+.}:" && cd osmo-gbproxy-0.5.1/_build/sub \ && ../../configure \ --with-systemdsystemunitdir=$dc_install_base/ \ --enable-werror --enable-external-tests --enable-manuals \ --srcdir=../.. --prefix="$dc_install_base" \ && make \ && make dvi \ && make check \ && make install \ && make installcheck \ && make uninstall \ && make distuninstallcheck_dir="$dc_install_base" \ distuninstallcheck \ && chmod -R a-w "$dc_install_base" \ && ({ \ (cd ../.. && umask 077 && mkdir "$dc_destdir") \ && make DESTDIR="$dc_destdir" install \ && make DESTDIR="$dc_destdir" uninstall \ && make DESTDIR="$dc_destdir" \ distuninstallcheck_dir="$dc_destdir" distuninstallcheck; \ } || { rm -rf "$dc_destdir"; exit 1; }) \ && rm -rf "$dc_destdir" \ && make dist \ && rm -rf osmo-gbproxy-0.5.1.tar.gz osmo-gbproxy-0.5.1.tar.bz2 \ && make distcleancheck \ && cd "$am__cwd" \ || exit 1
build 25784 0.0 0.0 4068 3208 ? S 21:15 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '2'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.4.1' && test -n '/build/osmo-gbproxy-0.5.1/_build/sub'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='include src doc contrib tests ' ;; \ *) list='include src doc contrib tests ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail"
build 25887 0.0 0.0 4068 3172 ? S 21:16 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '3'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.4.1' && test -n '/build/osmo-gbproxy-0.5.1/_build/sub/tests'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='' ;; \ *) list='' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail"
build 26044 61.5 0.0 35592 28336 ? S 21:16 0:00 /usr/bin/python3 /usr/local/bin/osmotestconfig.py -p /build/osmo-gbproxy-0.5.1/_build/sub/../.. -w /build/osmo-gbproxy-0.5.1/_build/sub -v
build 26045 0.0 0.0 21474909564 20332 ? S 21:16 0:00 src/osmo-gbproxy -c /build/osmo-gbproxy-0.5.1/_build/sub/../../doc/examples/osmo-gbproxy/osmo-gbproxy.cfg
build 26052 0.0 0.0 2680 1168 ? S 21:16 0:00 /bin/sh -c ps xua | grep osmo
build 26054 0.0 0.0 3896 1980 ? S 21:16 0:00 grep osmo
Socket: in 1 tries, connected to 127.0.0.1:4246 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 43358), raddr=('127.0.0.1', 4246)> (1 sockets open)
Terminating took 0.897s
Process returned code: 0
Socket: closing 127.0.0.1:4246 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 43358), raddr=('127.0.0.1', 4246)> (0 sockets open)
Verifying src/osmo-gbproxy -c /build/osmo-gbproxy-0.5.1/_build/sub/writtenconfig/osmo-gbproxy.cfgjll0ujfr, test write_config
Launching: PWD=/build/osmo-gbproxy-0.5.1/_build/sub 'src/osmo-gbproxy' '-c' '/build/osmo-gbproxy-0.5.1/_build/sub/writtenconfig/osmo-gbproxy.cfgjll0ujfr'
> ls -l /proc/26044/fd
total 0
lr-x------ 1 build build 64 Dec 6 21:16 0 -> pipe:[1188291336]
l-wx------ 1 build build 64 Dec 6 21:16 1 -> pipe:[1188291337]
l-wx------ 1 build build 64 Dec 6 21:16 2 -> pipe:[1188291338]
l-wx------ 1 build build 64 Dec 6 21:16 3 -> /dev/null
> ss -tn
State Recv-Q Send-Q Local Address:Port Peer Address:Port
> ss -tln
State Recv-Q Send-Q Local Address:Port Peer Address:Port
LISTEN 0 10 127.0.0.1:4246 0.0.0.0:*
LISTEN 0 10 127.0.0.1:4263 0.0.0.0:*
> ps xua | grep osmo
build 1 0.0 0.0 2592 1144 ? Ss 21:15 0:00 /usr/bin/timeout 30m /osmo-ci/scripts/wrapper_core_bt_on_error.sh /build/contrib/jenkins.sh
build 7 0.0 0.0 2680 1116 ? S 21:15 0:00 /bin/sh /osmo-ci/scripts/wrapper_core_bt_on_error.sh /build/contrib/jenkins.sh
build 23495 0.0 0.0 4068 3244 ? S 21:15 0:00 /bin/bash -c test -d osmo-gbproxy-0.5.1/_build || exit 0; \ dc_install_base=`CDPATH="${ZSH_VERSION+.}:" && cd osmo-gbproxy-0.5.1/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ && dc_destdir="${TMPDIR-/tmp}/am-dc-$$/" \ && am__cwd=`pwd` \ && CDPATH="${ZSH_VERSION+.}:" && cd osmo-gbproxy-0.5.1/_build/sub \ && ../../configure \ --with-systemdsystemunitdir=$dc_install_base/ \ --enable-werror --enable-external-tests --enable-manuals \ --srcdir=../.. --prefix="$dc_install_base" \ && make \ && make dvi \ && make check \ && make install \ && make installcheck \ && make uninstall \ && make distuninstallcheck_dir="$dc_install_base" \ distuninstallcheck \ && chmod -R a-w "$dc_install_base" \ && ({ \ (cd ../.. && umask 077 && mkdir "$dc_destdir") \ && make DESTDIR="$dc_destdir" install \ && make DESTDIR="$dc_destdir" uninstall \ && make DESTDIR="$dc_destdir" \ distuninstallcheck_dir="$dc_destdir" distuninstallcheck; \ } || { rm -rf "$dc_destdir"; exit 1; }) \ && rm -rf "$dc_destdir" \ && make dist \ && rm -rf osmo-gbproxy-0.5.1.tar.gz osmo-gbproxy-0.5.1.tar.bz2 \ && make distcleancheck \ && cd "$am__cwd" \ || exit 1
build 25784 0.0 0.0 4068 3208 ? S 21:15 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '2'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.4.1' && test -n '/build/osmo-gbproxy-0.5.1/_build/sub'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='include src doc contrib tests ' ;; \ *) list='include src doc contrib tests ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail"
build 25887 0.0 0.0 4068 3172 ? S 21:16 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '3'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.4.1' && test -n '/build/osmo-gbproxy-0.5.1/_build/sub/tests'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='' ;; \ *) list='' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail"
build 26044 5.0 0.0 35888 28632 ? S 21:16 0:00 /usr/bin/python3 /usr/local/bin/osmotestconfig.py -p /build/osmo-gbproxy-0.5.1/_build/sub/../.. -w /build/osmo-gbproxy-0.5.1/_build/sub -v
build 26056 0.0 0.0 21474909564 20192 ? S 21:16 0:00 src/osmo-gbproxy -c /build/osmo-gbproxy-0.5.1/_build/sub/writtenconfig/osmo-gbproxy.cfgjll0ujfr
build 26063 0.0 0.0 2680 1168 ? S 21:16 0:00 /bin/sh -c ps xua | grep osmo
build 26065 0.0 0.0 3896 1912 ? S 21:16 0:00 grep osmo
Socket: in 1 tries, connected to 127.0.0.1:4246 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 43370), raddr=('127.0.0.1', 4246)> (1 sockets open)
Terminating took 0.897s
Process returned code: 0
Socket: closing 127.0.0.1:4246 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 43370), raddr=('127.0.0.1', 4246)> (0 sockets open)
Verifying src/osmo-gbproxy -c /build/osmo-gbproxy-0.5.1/_build/sub/writtenconfig/osmo-gbproxy.cfgjll0ujfr, test token_vty_command
Launching: PWD=/build/osmo-gbproxy-0.5.1/_build/sub 'src/osmo-gbproxy' '-c' '/build/osmo-gbproxy-0.5.1/_build/sub/writtenconfig/osmo-gbproxy.cfgjll0ujfr'
> ls -l /proc/26044/fd
total 0
lr-x------ 1 build build 64 Dec 6 21:16 0 -> pipe:[1188291336]
l-wx------ 1 build build 64 Dec 6 21:16 1 -> pipe:[1188291337]
l-wx------ 1 build build 64 Dec 6 21:16 2 -> pipe:[1188291338]
l-wx------ 1 build build 64 Dec 6 21:16 3 -> /dev/null
> ss -tn
State Recv-Q Send-Q Local Address:Port Peer Address:Port
> ss -tln
State Recv-Q Send-Q Local Address:Port Peer Address:Port
> ps xua | grep osmo
build 1 0.0 0.0 2592 1144 ? Ss 21:15 0:00 /usr/bin/timeout 30m /osmo-ci/scripts/wrapper_core_bt_on_error.sh /build/contrib/jenkins.sh
build 7 0.0 0.0 2680 1116 ? S 21:15 0:00 /bin/sh /osmo-ci/scripts/wrapper_core_bt_on_error.sh /build/contrib/jenkins.sh
build 23495 0.0 0.0 4068 3244 ? S 21:15 0:00 /bin/bash -c test -d osmo-gbproxy-0.5.1/_build || exit 0; \ dc_install_base=`CDPATH="${ZSH_VERSION+.}:" && cd osmo-gbproxy-0.5.1/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ && dc_destdir="${TMPDIR-/tmp}/am-dc-$$/" \ && am__cwd=`pwd` \ && CDPATH="${ZSH_VERSION+.}:" && cd osmo-gbproxy-0.5.1/_build/sub \ && ../../configure \ --with-systemdsystemunitdir=$dc_install_base/ \ --enable-werror --enable-external-tests --enable-manuals \ --srcdir=../.. --prefix="$dc_install_base" \ && make \ && make dvi \ && make check \ && make install \ && make installcheck \ && make uninstall \ && make distuninstallcheck_dir="$dc_install_base" \ distuninstallcheck \ && chmod -R a-w "$dc_install_base" \ && ({ \ (cd ../.. && umask 077 && mkdir "$dc_destdir") \ && make DESTDIR="$dc_destdir" install \ && make DESTDIR="$dc_destdir" uninstall \ && make DESTDIR="$dc_destdir" \ distuninstallcheck_dir="$dc_destdir" distuninstallcheck; \ } || { rm -rf "$dc_destdir"; exit 1; }) \ && rm -rf "$dc_destdir" \ && make dist \ && rm -rf osmo-gbproxy-0.5.1.tar.gz osmo-gbproxy-0.5.1.tar.bz2 \ && make distcleancheck \ && cd "$am__cwd" \ || exit 1
build 25784 0.0 0.0 4068 3208 ? S 21:15 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '2'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.4.1' && test -n '/build/osmo-gbproxy-0.5.1/_build/sub'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='include src doc contrib tests ' ;; \ *) list='include src doc contrib tests ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail"
build 25887 0.0 0.0 4068 3172 ? S 21:16 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '3'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.4.1' && test -n '/build/osmo-gbproxy-0.5.1/_build/sub/tests'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='' ;; \ *) list='' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail"
build 26044 2.6 0.0 35888 28632 ? S 21:16 0:00 /usr/bin/python3 /usr/local/bin/osmotestconfig.py -p /build/osmo-gbproxy-0.5.1/_build/sub/../.. -w /build/osmo-gbproxy-0.5.1/_build/sub -v
build 26067 0.0 0.0 21474908888 17500 ? D 21:16 0:00 src/osmo-gbproxy -c /build/osmo-gbproxy-0.5.1/_build/sub/writtenconfig/osmo-gbproxy.cfgjll0ujfr
build 26074 0.0 0.0 2680 1104 ? S 21:16 0:00 /bin/sh -c ps xua | grep osmo
build 26076 0.0 0.0 3896 1832 ? S 21:16 0:00 grep osmo
Connecting socket failed, retrying...
Connecting socket failed, retrying...
Connecting socket failed, retrying...
Connecting socket failed, retrying...
Connecting socket failed, retrying...
Connecting socket failed, retrying...
Connecting socket failed, retrying...
Connecting socket failed, retrying...
Connecting socket failed, retrying...
Connecting socket failed, retrying...
Connecting socket failed, retrying...
Connecting socket failed, retrying...
Connecting socket failed, retrying...
Connecting socket failed, retrying...
Connecting socket failed, retrying...
Connecting socket failed, retrying...
Connecting socket failed, retrying...
Connecting socket failed, retrying...
Socket: in 19 tries, connected to 127.0.0.1:4246 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 43540), raddr=('127.0.0.1', 4246)> (1 sockets open)
Terminating took 0.897s
Process returned code: 0
Socket: closing 127.0.0.1:4246 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 43540), raddr=('127.0.0.1', 4246)> (0 sockets open)
../../../tests/vty_test_runner.py -w /build/osmo-gbproxy-0.5.1/_build/sub -v
confpath /build/osmo-gbproxy-0.5.1/tests/.., workdir /build/osmo-gbproxy-0.5.1/_build/sub
Running tests for specific VTY commands
testVtyDeletePeer (__main__.TestVTYGbproxy.testVtyDeletePeer) ... Opening /dev/null
Launching: PWD=/build/osmo-gbproxy-0.5.1/_build/sub './src/osmo-gbproxy' '-c' '/build/osmo-gbproxy-0.5.1/tests/../doc/examples/osmo-gbproxy/osmo-gbproxy.cfg'
> ls -l /proc/26078/fd
total 0
lr-x------ 1 build build 64 Dec 6 21:16 0 -> pipe:[1188291336]
l-wx------ 1 build build 64 Dec 6 21:16 1 -> pipe:[1188291337]
l-wx------ 1 build build 64 Dec 6 21:16 2 -> pipe:[1188291338]
l-wx------ 1 build build 64 Dec 6 21:16 3 -> /dev/null
> ss -tn
State Recv-Q Send-Q Local Address:Port Peer Address:Port
> ss -tln
State Recv-Q Send-Q Local Address:Port Peer Address:Port
LISTEN 0 10 127.0.0.1:4246 0.0.0.0:*
LISTEN 0 10 127.0.0.1:4263 0.0.0.0:*
> ps xua | grep osmo
build 1 0.0 0.0 2592 1144 ? Ss 21:15 0:00 /usr/bin/timeout 30m /osmo-ci/scripts/wrapper_core_bt_on_error.sh /build/contrib/jenkins.sh
build 7 0.0 0.0 2680 1116 ? S 21:15 0:00 /bin/sh /osmo-ci/scripts/wrapper_core_bt_on_error.sh /build/contrib/jenkins.sh
build 23495 0.0 0.0 4068 3244 ? S 21:15 0:00 /bin/bash -c test -d osmo-gbproxy-0.5.1/_build || exit 0; \ dc_install_base=`CDPATH="${ZSH_VERSION+.}:" && cd osmo-gbproxy-0.5.1/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ && dc_destdir="${TMPDIR-/tmp}/am-dc-$$/" \ && am__cwd=`pwd` \ && CDPATH="${ZSH_VERSION+.}:" && cd osmo-gbproxy-0.5.1/_build/sub \ && ../../configure \ --with-systemdsystemunitdir=$dc_install_base/ \ --enable-werror --enable-external-tests --enable-manuals \ --srcdir=../.. --prefix="$dc_install_base" \ && make \ && make dvi \ && make check \ && make install \ && make installcheck \ && make uninstall \ && make distuninstallcheck_dir="$dc_install_base" \ distuninstallcheck \ && chmod -R a-w "$dc_install_base" \ && ({ \ (cd ../.. && umask 077 && mkdir "$dc_destdir") \ && make DESTDIR="$dc_destdir" install \ && make DESTDIR="$dc_destdir" uninstall \ && make DESTDIR="$dc_destdir" \ distuninstallcheck_dir="$dc_destdir" distuninstallcheck; \ } || { rm -rf "$dc_destdir"; exit 1; }) \ && rm -rf "$dc_destdir" \ && make dist \ && rm -rf osmo-gbproxy-0.5.1.tar.gz osmo-gbproxy-0.5.1.tar.bz2 \ && make distcleancheck \ && cd "$am__cwd" \ || exit 1
build 25784 0.0 0.0 4068 3208 ? S 21:15 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '2'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.4.1' && test -n '/build/osmo-gbproxy-0.5.1/_build/sub'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='include src doc contrib tests ' ;; \ *) list='include src doc contrib tests ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail"
build 25887 0.0 0.0 4068 3172 ? S 21:16 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '3'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.4.1' && test -n '/build/osmo-gbproxy-0.5.1/_build/sub/tests'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='' ;; \ *) list='' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail"
build 26078 33.3 0.0 21200 15828 ? S 21:16 0:00 python3 ../../../tests/vty_test_runner.py -w /build/osmo-gbproxy-0.5.1/_build/sub -v
build 26079 0.0 0.0 21474909564 17980 ? S 21:16 0:00 ./src/osmo-gbproxy -c /build/osmo-gbproxy-0.5.1/tests/../doc/examples/osmo-gbproxy/osmo-gbproxy.cfg
build 26086 0.0 0.0 2680 1000 ? S 21:16 0:00 /bin/sh -c ps xua | grep osmo
build 26088 0.0 0.0 3896 1840 ? S 21:16 0:00 grep osmo
Socket: in 1 tries, connected to 127.0.0.1:4246 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 43548), raddr=('127.0.0.1', 4246)> (1 sockets open)
Socket: closing 127.0.0.1:4246 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 43548), raddr=('127.0.0.1', 4246)> (0 sockets open)
Terminating took 0.897s
Process returned code: 0
ok
testVtyShow (__main__.TestVTYGbproxy.testVtyShow) ... Launching: PWD=/build/osmo-gbproxy-0.5.1/_build/sub './src/osmo-gbproxy' '-c' '/build/osmo-gbproxy-0.5.1/tests/../doc/examples/osmo-gbproxy/osmo-gbproxy.cfg'
> ls -l /proc/26078/fd
total 0
lr-x------ 1 build build 64 Dec 6 21:16 0 -> pipe:[1188291336]
l-wx------ 1 build build 64 Dec 6 21:16 1 -> pipe:[1188291337]
l-wx------ 1 build build 64 Dec 6 21:16 2 -> pipe:[1188291338]
l-wx------ 1 build build 64 Dec 6 21:16 3 -> /dev/null
> ss -tn
State Recv-Q Send-Q Local Address:Port Peer Address:Port
> ss -tln
State Recv-Q Send-Q Local Address:Port Peer Address:Port
LISTEN 0 10 127.0.0.1:4246 0.0.0.0:*
LISTEN 0 10 127.0.0.1:4263 0.0.0.0:*
> ps xua | grep osmo
build 1 0.0 0.0 2592 1144 ? Ss 21:15 0:00 /usr/bin/timeout 30m /osmo-ci/scripts/wrapper_core_bt_on_error.sh /build/contrib/jenkins.sh
build 7 0.0 0.0 2680 1116 ? S 21:15 0:00 /bin/sh /osmo-ci/scripts/wrapper_core_bt_on_error.sh /build/contrib/jenkins.sh
build 23495 0.0 0.0 4068 3244 ? S 21:15 0:00 /bin/bash -c test -d osmo-gbproxy-0.5.1/_build || exit 0; \ dc_install_base=`CDPATH="${ZSH_VERSION+.}:" && cd osmo-gbproxy-0.5.1/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ && dc_destdir="${TMPDIR-/tmp}/am-dc-$$/" \ && am__cwd=`pwd` \ && CDPATH="${ZSH_VERSION+.}:" && cd osmo-gbproxy-0.5.1/_build/sub \ && ../../configure \ --with-systemdsystemunitdir=$dc_install_base/ \ --enable-werror --enable-external-tests --enable-manuals \ --srcdir=../.. --prefix="$dc_install_base" \ && make \ && make dvi \ && make check \ && make install \ && make installcheck \ && make uninstall \ && make distuninstallcheck_dir="$dc_install_base" \ distuninstallcheck \ && chmod -R a-w "$dc_install_base" \ && ({ \ (cd ../.. && umask 077 && mkdir "$dc_destdir") \ && make DESTDIR="$dc_destdir" install \ && make DESTDIR="$dc_destdir" uninstall \ && make DESTDIR="$dc_destdir" \ distuninstallcheck_dir="$dc_destdir" distuninstallcheck; \ } || { rm -rf "$dc_destdir"; exit 1; }) \ && rm -rf "$dc_destdir" \ && make dist \ && rm -rf osmo-gbproxy-0.5.1.tar.gz osmo-gbproxy-0.5.1.tar.bz2 \ && make distcleancheck \ && cd "$am__cwd" \ || exit 1
build 25784 0.0 0.0 4068 3208 ? S 21:15 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '2'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.4.1' && test -n '/build/osmo-gbproxy-0.5.1/_build/sub'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='include src doc contrib tests ' ;; \ *) list='include src doc contrib tests ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail"
build 25887 0.0 0.0 4068 3172 ? S 21:16 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '3'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.4.1' && test -n '/build/osmo-gbproxy-0.5.1/_build/sub/tests'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='' ;; \ *) list='' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail"
build 26078 1.3 0.0 21200 15960 ? S 21:16 0:00 python3 ../../../tests/vty_test_runner.py -w /build/osmo-gbproxy-0.5.1/_build/sub -v
build 26090 0.0 0.0 21474909564 18080 ? S 21:16 0:00 ./src/osmo-gbproxy -c /build/osmo-gbproxy-0.5.1/tests/../doc/examples/osmo-gbproxy/osmo-gbproxy.cfg
build 26097 0.0 0.0 2680 1076 ? S 21:16 0:00 /bin/sh -c ps xua | grep osmo
build 26099 0.0 0.0 3896 1952 ? S 21:16 0:00 grep osmo
Socket: in 1 tries, connected to 127.0.0.1:4246 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 43564), raddr=('127.0.0.1', 4246)> (1 sockets open)
Socket: closing 127.0.0.1:4246 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 43564), raddr=('127.0.0.1', 4246)> (0 sockets open)
Terminating took 0.897s
Process returned code: 0
ok
testVtyTree (__main__.TestVTYGbproxy.testVtyTree) ... Launching: PWD=/build/osmo-gbproxy-0.5.1/_build/sub './src/osmo-gbproxy' '-c' '/build/osmo-gbproxy-0.5.1/tests/../doc/examples/osmo-gbproxy/osmo-gbproxy.cfg'
> ls -l /proc/26078/fd
total 0
lr-x------ 1 build build 64 Dec 6 21:16 0 -> pipe:[1188291336]
l-wx------ 1 build build 64 Dec 6 21:16 1 -> pipe:[1188291337]
l-wx------ 1 build build 64 Dec 6 21:16 2 -> pipe:[1188291338]
l-wx------ 1 build build 64 Dec 6 21:16 3 -> /dev/null
> ss -tn
State Recv-Q Send-Q Local Address:Port Peer Address:Port
> ss -tln
State Recv-Q Send-Q Local Address:Port Peer Address:Port
LISTEN 0 10 127.0.0.1:4246 0.0.0.0:*
LISTEN 0 10 127.0.0.1:4263 0.0.0.0:*
> ps xua | grep osmo
build 1 0.0 0.0 2592 1144 ? Ss 21:15 0:00 /usr/bin/timeout 30m /osmo-ci/scripts/wrapper_core_bt_on_error.sh /build/contrib/jenkins.sh
build 7 0.0 0.0 2680 1116 ? S 21:15 0:00 /bin/sh /osmo-ci/scripts/wrapper_core_bt_on_error.sh /build/contrib/jenkins.sh
build 23495 0.0 0.0 4068 3244 ? S 21:15 0:00 /bin/bash -c test -d osmo-gbproxy-0.5.1/_build || exit 0; \ dc_install_base=`CDPATH="${ZSH_VERSION+.}:" && cd osmo-gbproxy-0.5.1/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ && dc_destdir="${TMPDIR-/tmp}/am-dc-$$/" \ && am__cwd=`pwd` \ && CDPATH="${ZSH_VERSION+.}:" && cd osmo-gbproxy-0.5.1/_build/sub \ && ../../configure \ --with-systemdsystemunitdir=$dc_install_base/ \ --enable-werror --enable-external-tests --enable-manuals \ --srcdir=../.. --prefix="$dc_install_base" \ && make \ && make dvi \ && make check \ && make install \ && make installcheck \ && make uninstall \ && make distuninstallcheck_dir="$dc_install_base" \ distuninstallcheck \ && chmod -R a-w "$dc_install_base" \ && ({ \ (cd ../.. && umask 077 && mkdir "$dc_destdir") \ && make DESTDIR="$dc_destdir" install \ && make DESTDIR="$dc_destdir" uninstall \ && make DESTDIR="$dc_destdir" \ distuninstallcheck_dir="$dc_destdir" distuninstallcheck; \ } || { rm -rf "$dc_destdir"; exit 1; }) \ && rm -rf "$dc_destdir" \ && make dist \ && rm -rf osmo-gbproxy-0.5.1.tar.gz osmo-gbproxy-0.5.1.tar.bz2 \ && make distcleancheck \ && cd "$am__cwd" \ || exit 1
build 25784 0.0 0.0 4068 3208 ? S 21:15 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '2'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.4.1' && test -n '/build/osmo-gbproxy-0.5.1/_build/sub'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='include src doc contrib tests ' ;; \ *) list='include src doc contrib tests ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail"
build 25887 0.0 0.0 4068 3172 ? S 21:16 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '3'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.4.1' && test -n '/build/osmo-gbproxy-0.5.1/_build/sub/tests'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='' ;; \ *) list='' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail"
build 26078 0.6 0.0 21200 15960 ? S 21:16 0:00 python3 ../../../tests/vty_test_runner.py -w /build/osmo-gbproxy-0.5.1/_build/sub -v
build 26101 0.0 0.0 21474909564 18172 ? S 21:16 0:00 ./src/osmo-gbproxy -c /build/osmo-gbproxy-0.5.1/tests/../doc/examples/osmo-gbproxy/osmo-gbproxy.cfg
build 26108 0.0 0.0 2680 1048 ? S 21:16 0:00 /bin/sh -c ps xua | grep osmo
build 26110 0.0 0.0 3896 1944 ? S 21:16 0:00 grep osmo
Socket: in 1 tries, connected to 127.0.0.1:4246 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 59602), raddr=('127.0.0.1', 4246)> (1 sockets open)
Socket: closing 127.0.0.1:4246 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 59602), raddr=('127.0.0.1', 4246)> (0 sockets open)
Terminating took 0.897s
Process returned code: 0
ok
----------------------------------------------------------------------
Ran 3 tests in 4.356s
OK
rm -f ../sms.db ../gsn_restart ../gtphub_restart_count
make[8]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/tests'
make vty-transcript-test
make[8]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/tests'
osmo_verify_transcript_vty.py -v \
-n OsmoGbProxy -p 4246 \
-r "../src/osmo-gbproxy -c ../../../doc/examples/osmo-gbproxy/osmo-gbproxy.cfg" \
${T:-../../../tests/osmo-gbproxy_test-nodes.vty}
/usr/local/bin/osmo_verify_transcript_vty.py:4: DeprecationWarning: pkg_resources is deprecated as an API. See https://setuptools.pypa.io/en/latest/pkg_resources.html
__import__('pkg_resources').run_script('osmopython==0.3.0', 'osmo_verify_transcript_vty.py')
[38;5;57m[1;33mDLNS[0;m[38;5;57m [1;33mNOTICE[0;m[38;5;57m NSE(00101) NS-STATUS.ind(bvci=00000): cause=NSE SNS no endpoints, transfer=0, first=1, mtu=0 (gprs_ns2.c:575)[0;m
[1;33mDGPRS[0;m [1;33mNOTICE[0;m NS: Unknown NS-STATUS.ind cause=NSE SNS no endpoints from NS (gb_proxy.c:1810)
[1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m Available via telnet 127.0.0.1 4246 (telnet_interface.c:88)
[38;5;33m[1;33mDLCTRL[0;m[38;5;33m [1;33mNOTICE[0;m[38;5;33m CTRL at 127.0.0.1 4263 (control_if.c:1026)[0;m
Launching: cd '/build/osmo-gbproxy-0.5.1/_build/sub/tests'; ../src/osmo-gbproxy -c ../../../doc/examples/osmo-gbproxy/osmo-gbproxy.cfg
OsmoGbProxy> enable
OsmoGbProxy# show nri all
sgsn nsei 101
% no NRI mappings
OsmoGbProxy# configure terminal
OsmoGbProxy(config)# list
help
list [with-flags]
show vty-attributes
show vty-attributes (application|library|global)
write terminal
write file [PATH]
write memory
write
show running-config
exit
end
hostname WORD
no hostname [HOSTNAME]
password (8|) WORD
password LINE
enable password (8|) WORD
enable password LINE
no enable password
banner motd default
banner motd file [FILE]
no banner motd
service terminal-length <0-512>
no service terminal-length [<0-512>]
line vty
service advanced-vty
no service advanced-vty
show history
ctrl
log stderr [blocking-io]
no log stderr
log file FILENAME [blocking-io]
no log file FILENAME
log alarms <2-32700>
no log alarms
log syslog (authpriv|cron|daemon|ftp|lpr|mail|news|user|uucp)
log syslog local <0-7>
no log syslog
log systemd-journal [raw]
no log systemd-journal
log gsmtap [HOSTNAME]
no log gsmtap [HOSTNAME]
stats reporter statsd [NAME]
no stats reporter statsd [NAME]
stats reporter log [NAME]
no stats reporter log [NAME]
stats interval <0-65535>
stats-tcp interval <0-65535>
stats-tcp batch-size <1-65535>
cpu-sched
gbproxy
sgsn nsei <0-65534>
ns
OsmoGbProxy(config)# sgsn nsei 101
OsmoGbProxy(config-sgsn)# list
help
list [with-flags]
show vty-attributes
show vty-attributes (application|library|global)
write terminal
write file [PATH]
write memory
write
show running-config
exit
end
name NAME
allow-attach
no allow-attach
nri add <0-32767> [<0-32767>]
nri del <0-32767> [<0-32767>]
OsmoGbProxy(config-sgsn)# exit
OsmoGbProxy(config)# gbproxy
OsmoGbProxy(config-gbproxy)# list
help
list [with-flags]
show vty-attributes
show vty-attributes (application|library|global)
write terminal
write file [PATH]
write memory
write
show running-config
exit
end
pool bvc-flow-control-ratio <1-100>
nri bitlen <0-15>
nri null add <0-32767> [<0-32767>]
nri null del <0-32767> [<0-32767>]
signal 15 received
Terminating took 0.897s
RESULTS:
pass: ../../../tests/osmo-gbproxy_test-nodes.vty
osmo_verify_transcript_vty.py -v \
-n OsmoGbProxy -p 4246 \
-r "../src/osmo-gbproxy -c ../../../doc/examples/osmo-gbproxy/osmo-gbproxy-pool.cfg" \
${T:-../../../tests/osmo-gbproxy-pool_test-nodes.vty}
/usr/local/bin/osmo_verify_transcript_vty.py:4: DeprecationWarning: pkg_resources is deprecated as an API. See https://setuptools.pypa.io/en/latest/pkg_resources.html
__import__('pkg_resources').run_script('osmopython==0.3.0', 'osmo_verify_transcript_vty.py')
[38;5;57m[1;33mDLNS[0;m[38;5;57m [1;33mNOTICE[0;m[38;5;57m NSE(00101) NS-STATUS.ind(bvci=00000): cause=NSE SNS no endpoints, transfer=0, first=1, mtu=0 (gprs_ns2.c:575)[0;m
[1;33mDGPRS[0;m [1;33mNOTICE[0;m NS: Unknown NS-STATUS.ind cause=NSE SNS no endpoints from NS (gb_proxy.c:1810)
[38;5;57m[1;33mDLNS[0;m[38;5;57m [1;33mNOTICE[0;m[38;5;57m NSE(00102) NS-STATUS.ind(bvci=00000): cause=NSE SNS no endpoints, transfer=0, first=1, mtu=0 (gprs_ns2.c:575)[0;m
[1;33mDGPRS[0;m [1;33mNOTICE[0;m NS: Unknown NS-STATUS.ind cause=NSE SNS no endpoints from NS (gb_proxy.c:1810)
[1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m Available via telnet 127.0.0.1 4246 (telnet_interface.c:88)
[38;5;33m[1;33mDLCTRL[0;m[38;5;33m [1;33mNOTICE[0;m[38;5;33m CTRL at 127.0.0.1 4263 (control_if.c:1026)[0;m
Launching: cd '/build/osmo-gbproxy-0.5.1/_build/sub/tests'; ../src/osmo-gbproxy -c ../../../doc/examples/osmo-gbproxy/osmo-gbproxy-pool.cfg
OsmoGbProxy> enable
OsmoGbProxy# show nri all
sgsn nsei 101
nri add 1
sgsn nsei 102
nri add 2
OsmoGbProxy# configure terminal
OsmoGbProxy(config)# list
help
list [with-flags]
show vty-attributes
show vty-attributes (application|library|global)
write terminal
write file [PATH]
write memory
write
show running-config
exit
end
hostname WORD
no hostname [HOSTNAME]
password (8|) WORD
password LINE
enable password (8|) WORD
enable password LINE
no enable password
banner motd default
banner motd file [FILE]
no banner motd
service terminal-length <0-512>
no service terminal-length [<0-512>]
line vty
service advanced-vty
no service advanced-vty
show history
ctrl
log stderr [blocking-io]
no log stderr
log file FILENAME [blocking-io]
no log file FILENAME
log alarms <2-32700>
no log alarms
log syslog (authpriv|cron|daemon|ftp|lpr|mail|news|user|uucp)
log syslog local <0-7>
no log syslog
log systemd-journal [raw]
no log systemd-journal
log gsmtap [HOSTNAME]
no log gsmtap [HOSTNAME]
stats reporter statsd [NAME]
no stats reporter statsd [NAME]
stats reporter log [NAME]
no stats reporter log [NAME]
stats interval <0-65535>
stats-tcp interval <0-65535>
stats-tcp batch-size <1-65535>
cpu-sched
gbproxy
sgsn nsei <0-65534>
ns
OsmoGbProxy(config)# sgsn nsei 101
OsmoGbProxy(config-sgsn)# list
help
list [with-flags]
show vty-attributes
show vty-attributes (application|library|global)
write terminal
write file [PATH]
write memory
write
show running-config
exit
end
name NAME
allow-attach
no allow-attach
nri add <0-32767> [<0-32767>]
nri del <0-32767> [<0-32767>]
OsmoGbProxy(config-sgsn)# exit
OsmoGbProxy(config)# gbproxy
OsmoGbProxy(config-gbproxy)# list
help
list [with-flags]
show vty-attributes
show vty-attributes (application|library|global)
write terminal
write file [PATH]
write memory
write
show running-config
exit
end
pool bvc-flow-control-ratio <1-100>
nri bitlen <0-15>
nri null add <0-32767> [<0-32767>]
nri null del <0-32767> [<0-32767>]
signal 15 received
Terminating took 0.897s
RESULTS:
pass: ../../../tests/osmo-gbproxy-pool_test-nodes.vty
rm -f ./sms.db ./gsn_restart
make[8]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/tests'
make[7]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/tests'
make ctrl-python-test
make[7]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/tests'
../../../tests/ctrl_test_runner.py -w /build/osmo-gbproxy-0.5.1/_build/sub -v
----------------------------------------------------------------------
Ran 0 tests in 0.000s
NO TESTS RAN
confpath /build/osmo-gbproxy-0.5.1/tests/.., workdir /build/osmo-gbproxy-0.5.1/_build/sub
Running tests for specific control commands
GbProxy has no CTRL tests yet
rm -f ../sms.db ../gsn_restart ../gtphub_restart_count
make[7]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/tests'
make[6]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/tests'
make[5]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/tests'
make[4]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/tests'
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/tests'
make[3]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub'
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub'
make[2]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub'
make[1]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub'
make[1]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub'
make install-recursive
make[2]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub'
Making install in include
make[3]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/include'
Making install in osmocom
make[4]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/include/osmocom'
Making install in gbproxy
make[5]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/include/osmocom/gbproxy'
make[6]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/include/osmocom/gbproxy'
make[6]: Nothing to be done for 'install-exec-am'.
make[6]: Nothing to be done for 'install-data-am'.
make[6]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/include/osmocom/gbproxy'
make[5]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/include/osmocom/gbproxy'
make[5]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/include/osmocom'
make[6]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/include/osmocom'
make[6]: Nothing to be done for 'install-exec-am'.
make[6]: Nothing to be done for 'install-data-am'.
make[6]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/include/osmocom'
make[5]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/include/osmocom'
make[4]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/include/osmocom'
make[4]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/include'
make[5]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/include'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/include'
make[4]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/include'
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/include'
Making install in src
make[3]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/src'
make[4]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/src'
make[4]: Nothing to be done for 'install-data-am'.
/usr/bin/mkdir -p '/build/osmo-gbproxy-0.5.1/_inst/bin'
/bin/bash ../libtool --mode=install /usr/bin/install -c osmo-gbproxy '/build/osmo-gbproxy-0.5.1/_inst/bin'
libtool: install: /usr/bin/install -c osmo-gbproxy /build/osmo-gbproxy-0.5.1/_inst/bin/osmo-gbproxy
make[4]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/src'
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/src'
Making install in doc
make[3]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/doc'
Making install in examples
make[4]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/doc/examples'
make[5]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/doc/examples'
make[5]: Nothing to be done for 'install-exec-am'.
/usr/bin/mkdir -p '/build/osmo-gbproxy-0.5.1/_inst/etc/osmocom'
/usr/bin/install -c -m 644 ../../../../doc/examples/osmo-gbproxy/osmo-gbproxy.cfg '/build/osmo-gbproxy-0.5.1/_inst/etc/osmocom'
make install-data-hook
make[6]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/doc/examples'
for f in $(find ../../../../doc/examples -name '*.cfg*' | sed -e 's,^../../../../doc/examples,,'); do \
j="/build/osmo-gbproxy-0.5.1/_inst/share/doc/osmo-gbproxy/examples/$f" && \
mkdir -p "$(dirname $j)" && \
/usr/bin/install -c -m 644 ../../../../doc/examples/$f $j; \
done
make[6]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/doc/examples'
make[5]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/doc/examples'
make[4]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/doc/examples'
Making install in manuals
make[4]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/doc/manuals'
make[5]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/doc/manuals'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/doc/manuals'
[ -n "osmo-gbproxy" ] || exit 1
if [ "" != "1" ]; then \
for i in osmogbproxy-usermanual.pdf osmogbproxy-vty-reference.pdf; do \
install -vDm644 "$i" "/build/osmo-gbproxy-0.5.1/_inst/share/doc/osmo-gbproxy-doc/$i" || exit 1; \
done; \
fi
install: creating directory '/build/osmo-gbproxy-0.5.1/_inst/share/doc/osmo-gbproxy-doc'
'osmogbproxy-usermanual.pdf' -> '/build/osmo-gbproxy-0.5.1/_inst/share/doc/osmo-gbproxy-doc/osmogbproxy-usermanual.pdf'
'osmogbproxy-vty-reference.pdf' -> '/build/osmo-gbproxy-0.5.1/_inst/share/doc/osmo-gbproxy-doc/osmogbproxy-vty-reference.pdf'
make[4]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/doc/manuals'
make[4]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/doc'
make[5]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/doc'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/doc'
make[4]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/doc'
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/doc'
Making install in contrib
make[3]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/contrib'
Making install in systemd
make[4]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/contrib/systemd'
make[5]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/contrib/systemd'
make[5]: Nothing to be done for 'install-exec-am'.
/usr/bin/mkdir -p '/build/osmo-gbproxy-0.5.1/_inst/'
/usr/bin/install -c -m 644 ../../../../contrib/systemd/osmo-gbproxy.service '/build/osmo-gbproxy-0.5.1/_inst/'
make[5]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/contrib/systemd'
make[4]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/contrib/systemd'
make[4]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/contrib'
make[5]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/contrib'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/contrib'
make[4]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/contrib'
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/contrib'
Making install in tests
make[3]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/tests'
make[4]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/tests'
make[5]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/tests'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/tests'
make[4]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/tests'
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/tests'
make[3]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub'
make[4]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub'
make[4]: Nothing to be done for 'install-exec-am'.
make[4]: Nothing to be done for 'install-data-am'.
make[4]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub'
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub'
make[2]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub'
make[1]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub'
make[1]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub'
Making installcheck in include
make[2]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/include'
Making installcheck in osmocom
make[3]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/include/osmocom'
Making installcheck in gbproxy
make[4]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/include/osmocom/gbproxy'
make[4]: Nothing to be done for 'installcheck'.
make[4]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/include/osmocom/gbproxy'
make[4]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/include/osmocom'
make[4]: Nothing to be done for 'installcheck-am'.
make[4]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/include/osmocom'
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/include/osmocom'
make[3]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/include'
make[3]: Nothing to be done for 'installcheck-am'.
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/include'
make[2]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/include'
Making installcheck in src
make[2]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/src'
make[2]: Nothing to be done for 'installcheck'.
make[2]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/src'
Making installcheck in doc
make[2]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/doc'
Making installcheck in examples
make[3]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/doc/examples'
make[3]: Nothing to be done for 'installcheck'.
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/doc/examples'
Making installcheck in manuals
make[3]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/doc/manuals'
make[3]: Nothing to be done for 'installcheck'.
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/doc/manuals'
make[3]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/doc'
make[3]: Nothing to be done for 'installcheck-am'.
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/doc'
make[2]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/doc'
Making installcheck in contrib
make[2]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/contrib'
Making installcheck in systemd
make[3]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/contrib/systemd'
make[3]: Nothing to be done for 'installcheck'.
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/contrib/systemd'
make[3]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/contrib'
make[3]: Nothing to be done for 'installcheck-am'.
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/contrib'
make[2]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/contrib'
Making installcheck in tests
make[2]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/tests'
make[3]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/tests'
/bin/bash '../../../tests/testsuite' AUTOTEST_PATH='/build/osmo-gbproxy-0.5.1/_inst/bin' \
## ------------------------------ ##
## osmo-gbproxy 0.5.1 test suite. ##
## ------------------------------ ##
## ------------- ##
## Test results. ##
## ------------- ##
0 tests were successful.
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/tests'
make[2]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/tests'
make[2]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub'
make[2]: Nothing to be done for 'installcheck-am'.
make[2]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub'
make[1]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub'
make[1]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub'
Making uninstall in include
make[2]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/include'
Making uninstall in osmocom
make[3]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/include/osmocom'
Making uninstall in gbproxy
make[4]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/include/osmocom/gbproxy'
make[4]: Nothing to be done for 'uninstall'.
make[4]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/include/osmocom/gbproxy'
make[4]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/include/osmocom'
make[4]: Nothing to be done for 'uninstall-am'.
make[4]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/include/osmocom'
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/include/osmocom'
make[3]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/include'
make[3]: Nothing to be done for 'uninstall-am'.
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/include'
make[2]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/include'
Making uninstall in src
make[2]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/src'
( cd '/build/osmo-gbproxy-0.5.1/_inst/bin' && rm -f osmo-gbproxy )
make[2]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/src'
Making uninstall in doc
make[2]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/doc'
Making uninstall in examples
make[3]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/doc/examples'
( cd '/build/osmo-gbproxy-0.5.1/_inst/etc/osmocom' && rm -f osmo-gbproxy.cfg )
make uninstall-hook
make[4]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/doc/examples'
for f in $(find ../../../../doc/examples -name '*.cfg*' | sed -e 's,^../../../../doc/examples,,'); do \
j="/build/osmo-gbproxy-0.5.1/_inst/share/doc/osmo-gbproxy/examples/$f" && \
rm -f $j; \
done
make[4]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/doc/examples'
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/doc/examples'
Making uninstall in manuals
make[3]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/doc/manuals'
[ -n "osmo-gbproxy" ] || exit 1
if [ "" != "1" ]; then \
for i in osmogbproxy-usermanual.pdf osmogbproxy-vty-reference.pdf; do \
rm -v "/build/osmo-gbproxy-0.5.1/_inst/share/doc/osmo-gbproxy-doc/$i"; \
done; \
fi
removed '/build/osmo-gbproxy-0.5.1/_inst/share/doc/osmo-gbproxy-doc/osmogbproxy-usermanual.pdf'
removed '/build/osmo-gbproxy-0.5.1/_inst/share/doc/osmo-gbproxy-doc/osmogbproxy-vty-reference.pdf'
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/doc/manuals'
make[3]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/doc'
make[3]: Nothing to be done for 'uninstall-am'.
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/doc'
make[2]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/doc'
Making uninstall in contrib
make[2]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/contrib'
Making uninstall in systemd
make[3]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/contrib/systemd'
( cd '/build/osmo-gbproxy-0.5.1/_inst/' && rm -f osmo-gbproxy.service )
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/contrib/systemd'
make[3]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/contrib'
make[3]: Nothing to be done for 'uninstall-am'.
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/contrib'
make[2]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/contrib'
Making uninstall in tests
make[2]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/tests'
make[3]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/tests'
make[3]: Nothing to be done for 'uninstall-am'.
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/tests'
make[2]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/tests'
make[2]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub'
make[2]: Nothing to be done for 'uninstall-am'.
make[2]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub'
make[1]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub'
make[1]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub'
make[1]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub'
make[1]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub'
make install-recursive
make[2]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub'
Making install in include
make[3]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/include'
Making install in osmocom
make[4]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/include/osmocom'
Making install in gbproxy
make[5]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/include/osmocom/gbproxy'
make[6]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/include/osmocom/gbproxy'
make[6]: Nothing to be done for 'install-exec-am'.
make[6]: Nothing to be done for 'install-data-am'.
make[6]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/include/osmocom/gbproxy'
make[5]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/include/osmocom/gbproxy'
make[5]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/include/osmocom'
make[6]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/include/osmocom'
make[6]: Nothing to be done for 'install-exec-am'.
make[6]: Nothing to be done for 'install-data-am'.
make[6]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/include/osmocom'
make[5]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/include/osmocom'
make[4]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/include/osmocom'
make[4]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/include'
make[5]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/include'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/include'
make[4]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/include'
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/include'
Making install in src
make[3]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/src'
make[4]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/src'
make[4]: Nothing to be done for 'install-data-am'.
/usr/bin/mkdir -p '/tmp/am-dc-23495//build/osmo-gbproxy-0.5.1/_inst/bin'
/bin/bash ../libtool --mode=install /usr/bin/install -c osmo-gbproxy '/tmp/am-dc-23495//build/osmo-gbproxy-0.5.1/_inst/bin'
libtool: install: /usr/bin/install -c osmo-gbproxy /tmp/am-dc-23495//build/osmo-gbproxy-0.5.1/_inst/bin/osmo-gbproxy
make[4]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/src'
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/src'
Making install in doc
make[3]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/doc'
Making install in examples
make[4]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/doc/examples'
make[5]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/doc/examples'
make[5]: Nothing to be done for 'install-exec-am'.
/usr/bin/mkdir -p '/tmp/am-dc-23495//build/osmo-gbproxy-0.5.1/_inst/etc/osmocom'
/usr/bin/install -c -m 644 ../../../../doc/examples/osmo-gbproxy/osmo-gbproxy.cfg '/tmp/am-dc-23495//build/osmo-gbproxy-0.5.1/_inst/etc/osmocom'
make install-data-hook
make[6]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/doc/examples'
for f in $(find ../../../../doc/examples -name '*.cfg*' | sed -e 's,^../../../../doc/examples,,'); do \
j="/tmp/am-dc-23495//build/osmo-gbproxy-0.5.1/_inst/share/doc/osmo-gbproxy/examples/$f" && \
mkdir -p "$(dirname $j)" && \
/usr/bin/install -c -m 644 ../../../../doc/examples/$f $j; \
done
make[6]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/doc/examples'
make[5]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/doc/examples'
make[4]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/doc/examples'
Making install in manuals
make[4]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/doc/manuals'
make[5]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/doc/manuals'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/doc/manuals'
[ -n "osmo-gbproxy" ] || exit 1
if [ "" != "1" ]; then \
for i in osmogbproxy-usermanual.pdf osmogbproxy-vty-reference.pdf; do \
install -vDm644 "$i" "/tmp/am-dc-23495//build/osmo-gbproxy-0.5.1/_inst/share/doc/osmo-gbproxy-doc/$i" || exit 1; \
done; \
fi
install: creating directory '/tmp/am-dc-23495//build/osmo-gbproxy-0.5.1/_inst/share/doc/osmo-gbproxy-doc'
'osmogbproxy-usermanual.pdf' -> '/tmp/am-dc-23495//build/osmo-gbproxy-0.5.1/_inst/share/doc/osmo-gbproxy-doc/osmogbproxy-usermanual.pdf'
'osmogbproxy-vty-reference.pdf' -> '/tmp/am-dc-23495//build/osmo-gbproxy-0.5.1/_inst/share/doc/osmo-gbproxy-doc/osmogbproxy-vty-reference.pdf'
make[4]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/doc/manuals'
make[4]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/doc'
make[5]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/doc'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/doc'
make[4]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/doc'
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/doc'
Making install in contrib
make[3]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/contrib'
Making install in systemd
make[4]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/contrib/systemd'
make[5]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/contrib/systemd'
make[5]: Nothing to be done for 'install-exec-am'.
/usr/bin/mkdir -p '/tmp/am-dc-23495//build/osmo-gbproxy-0.5.1/_inst/'
/usr/bin/install -c -m 644 ../../../../contrib/systemd/osmo-gbproxy.service '/tmp/am-dc-23495//build/osmo-gbproxy-0.5.1/_inst/'
make[5]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/contrib/systemd'
make[4]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/contrib/systemd'
make[4]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/contrib'
make[5]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/contrib'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/contrib'
make[4]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/contrib'
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/contrib'
Making install in tests
make[3]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/tests'
make[4]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/tests'
make[5]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/tests'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/tests'
make[4]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/tests'
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/tests'
make[3]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub'
make[4]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub'
make[4]: Nothing to be done for 'install-exec-am'.
make[4]: Nothing to be done for 'install-data-am'.
make[4]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub'
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub'
make[2]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub'
make[1]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub'
make[1]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub'
Making uninstall in include
make[2]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/include'
Making uninstall in osmocom
make[3]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/include/osmocom'
Making uninstall in gbproxy
make[4]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/include/osmocom/gbproxy'
make[4]: Nothing to be done for 'uninstall'.
make[4]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/include/osmocom/gbproxy'
make[4]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/include/osmocom'
make[4]: Nothing to be done for 'uninstall-am'.
make[4]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/include/osmocom'
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/include/osmocom'
make[3]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/include'
make[3]: Nothing to be done for 'uninstall-am'.
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/include'
make[2]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/include'
Making uninstall in src
make[2]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/src'
( cd '/tmp/am-dc-23495//build/osmo-gbproxy-0.5.1/_inst/bin' && rm -f osmo-gbproxy )
make[2]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/src'
Making uninstall in doc
make[2]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/doc'
Making uninstall in examples
make[3]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/doc/examples'
( cd '/tmp/am-dc-23495//build/osmo-gbproxy-0.5.1/_inst/etc/osmocom' && rm -f osmo-gbproxy.cfg )
make uninstall-hook
make[4]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/doc/examples'
for f in $(find ../../../../doc/examples -name '*.cfg*' | sed -e 's,^../../../../doc/examples,,'); do \
j="/tmp/am-dc-23495//build/osmo-gbproxy-0.5.1/_inst/share/doc/osmo-gbproxy/examples/$f" && \
rm -f $j; \
done
make[4]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/doc/examples'
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/doc/examples'
Making uninstall in manuals
make[3]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/doc/manuals'
[ -n "osmo-gbproxy" ] || exit 1
if [ "" != "1" ]; then \
for i in osmogbproxy-usermanual.pdf osmogbproxy-vty-reference.pdf; do \
rm -v "/tmp/am-dc-23495//build/osmo-gbproxy-0.5.1/_inst/share/doc/osmo-gbproxy-doc/$i"; \
done; \
fi
removed '/tmp/am-dc-23495//build/osmo-gbproxy-0.5.1/_inst/share/doc/osmo-gbproxy-doc/osmogbproxy-usermanual.pdf'
removed '/tmp/am-dc-23495//build/osmo-gbproxy-0.5.1/_inst/share/doc/osmo-gbproxy-doc/osmogbproxy-vty-reference.pdf'
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/doc/manuals'
make[3]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/doc'
make[3]: Nothing to be done for 'uninstall-am'.
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/doc'
make[2]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/doc'
Making uninstall in contrib
make[2]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/contrib'
Making uninstall in systemd
make[3]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/contrib/systemd'
( cd '/tmp/am-dc-23495//build/osmo-gbproxy-0.5.1/_inst/' && rm -f osmo-gbproxy.service )
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/contrib/systemd'
make[3]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/contrib'
make[3]: Nothing to be done for 'uninstall-am'.
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/contrib'
make[2]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/contrib'
Making uninstall in tests
make[2]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/tests'
make[3]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/tests'
make[3]: Nothing to be done for 'uninstall-am'.
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/tests'
make[2]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/tests'
make[2]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub'
make[2]: Nothing to be done for 'uninstall-am'.
make[2]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub'
make[1]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub'
make[1]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub'
make[1]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub'
make[1]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub'
make dist-bzip2 dist-gzip am__post_remove_distdir='@:'
make[2]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub'
make distdir-am
make[3]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub'
if test -d "osmo-gbproxy-0.5.1"; then find "osmo-gbproxy-0.5.1" -type d ! -perm -700 -exec chmod u+rwx {} ';' ; rm -rf "osmo-gbproxy-0.5.1" || { sleep 5 && rm -rf "osmo-gbproxy-0.5.1"; }; else :; fi
(cd include && make top_distdir=../osmo-gbproxy-0.5.1 distdir=../osmo-gbproxy-0.5.1/include \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[4]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/include'
make distdir-am
make[5]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/include'
(cd osmocom && make top_distdir=../../osmo-gbproxy-0.5.1 distdir=../../osmo-gbproxy-0.5.1/include/osmocom \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[6]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/include/osmocom'
make distdir-am
make[7]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/include/osmocom'
(cd gbproxy && make top_distdir=../../../osmo-gbproxy-0.5.1 distdir=../../../osmo-gbproxy-0.5.1/include/osmocom/gbproxy \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[8]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/include/osmocom/gbproxy'
make distdir-am
make[9]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/include/osmocom/gbproxy'
make[9]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/include/osmocom/gbproxy'
make[8]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/include/osmocom/gbproxy'
make[7]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/include/osmocom'
make[6]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/include/osmocom'
make[5]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/include'
make[4]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/include'
(cd src && make top_distdir=../osmo-gbproxy-0.5.1 distdir=../osmo-gbproxy-0.5.1/src \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[4]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/src'
make distdir-am
make[5]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/src'
make[5]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/src'
make[4]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/src'
(cd doc && make top_distdir=../osmo-gbproxy-0.5.1 distdir=../osmo-gbproxy-0.5.1/doc \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[4]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/doc'
make distdir-am
make[5]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/doc'
(cd examples && make top_distdir=../../osmo-gbproxy-0.5.1 distdir=../../osmo-gbproxy-0.5.1/doc/examples \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[6]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/doc/examples'
make distdir-am
make[7]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/doc/examples'
make \
top_distdir="../../osmo-gbproxy-0.5.1" distdir="../../osmo-gbproxy-0.5.1/doc/examples" \
dist-hook
make[8]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/doc/examples'
for f in $(find ../../../../doc/examples -name '*.cfg*' | sed -e 's,^../../../../doc/examples,,'); do \
j="../../osmo-gbproxy-0.5.1/doc/examples/$f" && \
mkdir -p "$(dirname $j)" && \
/usr/bin/install -c -m 644 ../../../../doc/examples/$f $j; \
done
make[8]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/doc/examples'
make[7]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/doc/examples'
make[6]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/doc/examples'
(cd manuals && make top_distdir=../../osmo-gbproxy-0.5.1 distdir=../../osmo-gbproxy-0.5.1/doc/manuals \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[6]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/doc/manuals'
make distdir-am
make[7]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/doc/manuals'
make[7]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/doc/manuals'
make[6]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/doc/manuals'
make[5]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/doc'
make[4]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/doc'
(cd contrib && make top_distdir=../osmo-gbproxy-0.5.1 distdir=../osmo-gbproxy-0.5.1/contrib \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[4]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/contrib'
make distdir-am
make[5]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/contrib'
(cd systemd && make top_distdir=../../osmo-gbproxy-0.5.1 distdir=../../osmo-gbproxy-0.5.1/contrib/systemd \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[6]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/contrib/systemd'
make distdir-am
make[7]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/contrib/systemd'
make[7]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/contrib/systemd'
make[6]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/contrib/systemd'
make[5]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/contrib'
make[4]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/contrib'
(cd tests && make top_distdir=../osmo-gbproxy-0.5.1 distdir=../osmo-gbproxy-0.5.1/tests \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[4]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/tests'
make distdir-am
make[5]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/tests'
make[5]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/tests'
make[4]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/tests'
make \
top_distdir="osmo-gbproxy-0.5.1" distdir="osmo-gbproxy-0.5.1" \
dist-hook
make[4]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub'
echo 0.5.1 > osmo-gbproxy-0.5.1/.tarball-version
make[4]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub'
test -n "" \
|| find "osmo-gbproxy-0.5.1" -type d ! -perm -755 \
-exec chmod u+rwx,go+rx {} \; -o \
! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
! -type d ! -perm -400 -exec chmod a+r {} \; -o \
! -type d ! -perm -444 -exec /bin/bash /build/osmo-gbproxy-0.5.1/install-sh -c -m a+r {} {} \; \
|| chmod -R a+r "osmo-gbproxy-0.5.1"
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub'
tardir=osmo-gbproxy-0.5.1 && ${TAR-tar} chof - "$tardir" | BZIP2=${BZIP2--9} bzip2 -c >osmo-gbproxy-0.5.1.tar.bz2
tardir=osmo-gbproxy-0.5.1 && ${TAR-tar} chof - "$tardir" | eval GZIP= gzip -9 -c >osmo-gbproxy-0.5.1.tar.gz
make[2]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub'
if test -d "osmo-gbproxy-0.5.1"; then find "osmo-gbproxy-0.5.1" -type d ! -perm -700 -exec chmod u+rwx {} ';' ; rm -rf "osmo-gbproxy-0.5.1" || { sleep 5 && rm -rf "osmo-gbproxy-0.5.1"; }; else :; fi
make[1]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub'
make[1]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub'
Making distclean in include
make[2]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/include'
Making distclean in osmocom
make[3]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/include/osmocom'
Making distclean in gbproxy
make[4]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/include/osmocom/gbproxy'
rm -rf .libs _libs
rm -f *.lo
rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "../../../../../include/osmocom/gbproxy" || rm -f
rm -f Makefile
make[4]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/include/osmocom/gbproxy'
make[4]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/include/osmocom'
rm -rf .libs _libs
rm -f *.lo
rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "../../../../include/osmocom" || rm -f
make[4]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/include/osmocom'
rm -f Makefile
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/include/osmocom'
make[3]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/include'
rm -rf .libs _libs
rm -f *.lo
rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "../../../include" || rm -f
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/include'
rm -f Makefile
make[2]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/include'
Making distclean in src
make[2]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/src'
rm -f osmo-gbproxy
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
rm -f *.tab.c
rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test -z "" || rm -f osmo-gbproxy
test . = "../../../src" || rm -f
rm -f ./.deps/gb_proxy.Po
rm -f ./.deps/gb_proxy_ctrl.Po
rm -f ./.deps/gb_proxy_main.Po
rm -f ./.deps/gb_proxy_peer.Po
rm -f ./.deps/gb_proxy_vty.Po
rm -f Makefile
make[2]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/src'
Making distclean in doc
make[2]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/doc'
Making distclean in examples
make[3]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/doc/examples'
rm -rf .libs _libs
rm -f *.lo
rm -f
test . = "../../../../doc/examples" || rm -f
rm -f Makefile
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/doc/examples'
Making distclean in manuals
make[3]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/doc/manuals'
rm -rf .libs _libs
rm -f *.lo
rm -f
rm -rf osmogbproxy-usermanual__*.png osmogbproxy-usermanual__*.svg osmogbproxy-usermanual.check osmogbproxy-usermanual.pdf osmogbproxy-usermanual.html osmogbproxy-vty-reference.pdf osmogbproxy-vty-reference.lint generated ./vty/gbproxy_vty_reference.xml common build generated/.pdf_shrink_marker
test . = "../../../../doc/manuals" || rm -f
rm -f Makefile
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/doc/manuals'
make[3]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/doc'
rm -rf .libs _libs
rm -f *.lo
rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "../../../doc" || rm -f
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/doc'
rm -f Makefile
make[2]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/doc'
Making distclean in contrib
make[2]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/contrib'
Making distclean in systemd
make[3]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/contrib/systemd'
rm -rf .libs _libs
rm -f *.lo
rm -f
test . = "../../../../contrib/systemd" || rm -f
rm -f Makefile
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/contrib/systemd'
make[3]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/contrib'
rm -rf .libs _libs
rm -f *.lo
rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "../../../contrib" || rm -f
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/contrib'
rm -f Makefile
make[2]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/contrib'
Making distclean in tests
make[2]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/tests'
make[3]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub/tests'
rm -rf .libs _libs
test ! -f '../../../tests/testsuite' || \
/bin/bash '../../../tests/testsuite' --clean
rm -f *.lo
rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "../../../tests" || rm -f
rm -f atconfig
make[3]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/tests'
rm -f Makefile
make[2]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub/tests'
make[2]: Entering directory '/build/osmo-gbproxy-0.5.1/_build/sub'
rm -rf .libs _libs
rm -f *.lo
rm -f
rm -f bscconfig.h stamp-h1
rm -f libtool config.lt
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "../.." || rm -f
rm -f cscope.out cscope.in.out cscope.po.out cscope.files
make[2]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub'
rm -f config.status config.cache config.log configure.lineno config.status.lineno
rm -f Makefile
make[1]: Leaving directory '/build/osmo-gbproxy-0.5.1/_build/sub'
if test -d "osmo-gbproxy-0.5.1"; then find "osmo-gbproxy-0.5.1" -type d ! -perm -700 -exec chmod u+rwx {} ';' ; rm -rf "osmo-gbproxy-0.5.1" || { sleep 5 && rm -rf "osmo-gbproxy-0.5.1"; }; else :; fi
====================================================
osmo-gbproxy-0.5.1 archives ready for distribution:
osmo-gbproxy-0.5.1.tar.gz
osmo-gbproxy-0.5.1.tar.bz2
====================================================
+ '[' 1 = 1 ']'
+ '[' 1 = 1 ']'
+ make -C /build/doc/manuals publish
make: Entering directory '/build/doc/manuals'
/opt/osmo-gsm-manuals/build/shrink-pdfs.sh osmogbproxy-usermanual.pdf osmogbproxy-vty-reference.pdf
* osmogbproxy-usermanual.pdf: 744K
* osmogbproxy-vty-reference.pdf: 260K
[ -n "osmo-gbproxy" ] || exit 1
rm -rf "_publish_tmpdir"
mkdir -p "_publish_tmpdir/osmo-gbproxy/master"
cp osmogbproxy-usermanual.pdf osmogbproxy-vty-reference.pdf "_publish_tmpdir/osmo-gbproxy/master"
cd "_publish_tmpdir" && \
rsync \
-avzR \
-e "ssh -o 'UserKnownHostsFile=/opt/osmo-gsm-manuals/build/known_hosts' -p 48" \
"osmo-gbproxy" \
docs@ftp.osmocom.org:web-files/
sending incremental file list
osmo-gbproxy/
osmo-gbproxy/master/
osmo-gbproxy/master/osmogbproxy-usermanual.pdf
osmo-gbproxy/master/osmogbproxy-vty-reference.pdf
sent 25,399 bytes received 7,620 bytes 22,012.67 bytes/sec
total size is 1,024,442 speedup is 31.03
rm -rf "_publish_tmpdir"
make: Leaving directory '/build/doc/manuals'
+ make -j 12 maintainer-clean
Making maintainer-clean in include
make[1]: Entering directory '/build/include'
Making maintainer-clean in osmocom
make[2]: Entering directory '/build/include/osmocom'
Making maintainer-clean in gbproxy
make[3]: Entering directory '/build/include/osmocom/gbproxy'
rm -rf .libs _libs
rm -f *.lo
rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
This command is intended for maintainers to use
test . = "." || rm -f
it deletes files that may require special tools to rebuild.
rm -f Makefile
make[3]: Leaving directory '/build/include/osmocom/gbproxy'
make[3]: Entering directory '/build/include/osmocom'
rm -rf .libs _libs
rm -f *.lo
rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
This command is intended for maintainers to use
test . = "." || rm -f
it deletes files that may require special tools to rebuild.
make[3]: Leaving directory '/build/include/osmocom'
rm -f Makefile
make[2]: Leaving directory '/build/include/osmocom'
make[2]: Entering directory '/build/include'
rm -rf .libs _libs
rm -f *.lo
rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
This command is intended for maintainers to use
test . = "." || rm -f
it deletes files that may require special tools to rebuild.
make[2]: Leaving directory '/build/include'
rm -f Makefile
make[1]: Leaving directory '/build/include'
Making maintainer-clean in src
make[1]: Entering directory '/build/src'
rm -f osmo-gbproxy
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
rm -f *.tab.c
rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test -z "" || rm -f osmo-gbproxy
test . = "." || rm -f
This command is intended for maintainers to use
it deletes files that may require special tools to rebuild.
rm -f ./.deps/gb_proxy.Po
rm -f ./.deps/gb_proxy_ctrl.Po
rm -f ./.deps/gb_proxy_main.Po
rm -f ./.deps/gb_proxy_peer.Po
rm -f ./.deps/gb_proxy_vty.Po
rm -f Makefile
make[1]: Leaving directory '/build/src'
Making maintainer-clean in doc
make[1]: Entering directory '/build/doc'
Making maintainer-clean in examples
make[2]: Entering directory '/build/doc/examples'
rm -rf .libs _libs
rm -f *.lo
rm -f
This command is intended for maintainers to use
test . = "." || rm -f
it deletes files that may require special tools to rebuild.
rm -f Makefile
make[2]: Leaving directory '/build/doc/examples'
Making maintainer-clean in manuals
make[2]: Entering directory '/build/doc/manuals'
rm -rf .libs _libs
rm -f *.lo
rm -f
This command is intended for maintainers to use
test . = "." || rm -f
it deletes files that may require special tools to rebuild.
rm -f Makefile
make[2]: Leaving directory '/build/doc/manuals'
make[2]: Entering directory '/build/doc'
rm -rf .libs _libs
rm -f *.lo
rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "." || rm -f
This command is intended for maintainers to use
it deletes files that may require special tools to rebuild.
make[2]: Leaving directory '/build/doc'
rm -f Makefile
make[1]: Leaving directory '/build/doc'
Making maintainer-clean in contrib
make[1]: Entering directory '/build/contrib'
Making maintainer-clean in systemd
make[2]: Entering directory '/build/contrib/systemd'
rm -rf .libs _libs
rm -f *.lo
rm -f
This command is intended for maintainers to use
test . = "." || rm -f
it deletes files that may require special tools to rebuild.
rm -f Makefile
make[2]: Leaving directory '/build/contrib/systemd'
make[2]: Entering directory '/build/contrib'
rm -rf .libs _libs
rm -f *.lo
rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "." || rm -f
This command is intended for maintainers to use
it deletes files that may require special tools to rebuild.
make[2]: Leaving directory '/build/contrib'
rm -f Makefile
make[1]: Leaving directory '/build/contrib'
Making maintainer-clean in tests
make[1]: Entering directory '/build/tests'
make[2]: Entering directory '/build/tests'
rm -rf .libs _libs
test ! -f './testsuite' || \
/bin/bash './testsuite' --clean
rm -f *.lo
rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
This command is intended for maintainers to use
test . = "." || rm -f
rm -f atconfig
it deletes files that may require special tools to rebuild.
make[2]: Leaving directory '/build/tests'
rm -f Makefile
make[1]: Leaving directory '/build/tests'
make[1]: Entering directory '/build'
rm -rf .libs _libs
rm -f *.lo
rm -f
rm -f bscconfig.h stamp-h1
rm -f libtool config.lt
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "." || rm -f
This command is intended for maintainers to use
rm -f cscope.out cscope.in.out cscope.po.out cscope.files
it deletes files that may require special tools to rebuild.
rm -f ./.version
make[1]: Leaving directory '/build'
rm -f config.status config.cache config.log configure.lineno config.status.lineno
rm -rf ./autom4te.cache
rm -f Makefile
+ osmo-clean-workspace.sh
+ chmod -R +w .
+ git checkout -f HEAD
+ git clean -dxf
Removing .cache/
Removing .texlive2025/
Removing Makefile.in
Removing __pycache__/
Removing aclocal.m4
Removing bscconfig.h.in
Removing compile
Removing config.guess
Removing config.sub
Removing configure
Removing contrib/Makefile.in
Removing contrib/systemd/Makefile.in
Removing depcomp
Skipping repository deps/libosmocore
Removing deps/install
Removing doc/Makefile.in
Removing doc/examples/Makefile.in
Removing doc/manuals/Makefile.in
Removing doc/manuals/build
Removing doc/manuals/common
Removing doc/manuals/generated/
Removing doc/manuals/osmogbproxy-usermanual.check
Removing doc/manuals/osmogbproxy-usermanual.html
Removing doc/manuals/osmogbproxy-usermanual.pdf
Removing doc/manuals/osmogbproxy-usermanual__1.svg
Removing doc/manuals/osmogbproxy-usermanual__10.svg
Removing doc/manuals/osmogbproxy-usermanual__11.svg
Removing doc/manuals/osmogbproxy-usermanual__12.svg
Removing doc/manuals/osmogbproxy-usermanual__13.svg
Removing doc/manuals/osmogbproxy-usermanual__14.svg
Removing doc/manuals/osmogbproxy-usermanual__15.svg
Removing doc/manuals/osmogbproxy-usermanual__2.svg
Removing doc/manuals/osmogbproxy-usermanual__3.svg
Removing doc/manuals/osmogbproxy-usermanual__4.svg
Removing doc/manuals/osmogbproxy-usermanual__5.svg
Removing doc/manuals/osmogbproxy-usermanual__6.svg
Removing doc/manuals/osmogbproxy-usermanual__7.svg
Removing doc/manuals/osmogbproxy-usermanual__8.svg
Removing doc/manuals/osmogbproxy-usermanual__9.svg
Removing doc/manuals/osmogbproxy-vty-reference.pdf
Removing doc/manuals/vty/gbproxy_vty_reference.xml
Removing include/Makefile.in
Removing include/osmocom/Makefile.in
Removing include/osmocom/gbproxy/Makefile.in
Removing install-sh
Removing ltmain.sh
Removing m4/libtool.m4
Removing m4/ltoptions.m4
Removing m4/ltsugar.m4
Removing m4/ltversion.m4
Removing m4/lt~obsolete.m4
Removing missing
Removing osmo-gbproxy-0.5.1.tar.bz2
Removing osmo-gbproxy-0.5.1.tar.gz
Removing src/.deps/
Removing src/Makefile.in
Removing tests/Makefile.in
Removing tests/package.m4
Removing tests/testsuite
+ [ -d /build/deps ]
+ git_clean /build/deps/libosmocore
+ repos=/build/deps/libosmocore
+ [ ! -d /build/deps/libosmocore ]
+ [ ! -d /build/deps/libosmocore/.git ]
+ git -C /build/deps/libosmocore checkout -f HEAD
+ git -C /build/deps/libosmocore clean -dxf
Removing .version
Removing Doxyfile.codec
Removing Doxyfile.coding
Removing Doxyfile.ctrl
Removing Doxyfile.gb
Removing Doxyfile.gsm
Removing Doxyfile.isdn
Removing Doxyfile.sim
Removing Doxyfile.usb
Removing Doxyfile.vty
Removing Makefile
Removing Makefile.in
Removing aclocal.m4
Removing autom4te.cache/
Removing compile
Removing config.guess
Removing config.h
Removing config.h.in
Removing config.log
Removing config.status
Removing config.sub
Removing configure
Removing contrib/libosmocore.spec
Removing depcomp
Removing include/Makefile
Removing include/Makefile.in
Removing include/osmocom/Makefile
Removing include/osmocom/Makefile.in
Removing include/osmocom/codec/Makefile
Removing include/osmocom/codec/Makefile.in
Removing include/osmocom/coding/Makefile
Removing include/osmocom/coding/Makefile.in
Removing include/osmocom/core/Makefile
Removing include/osmocom/core/Makefile.in
Removing include/osmocom/core/bit16gen.h
Removing include/osmocom/core/bit32gen.h
Removing include/osmocom/core/bit64gen.h
Removing include/osmocom/core/crc16gen.h
Removing include/osmocom/core/crc32gen.h
Removing include/osmocom/core/crc64gen.h
Removing include/osmocom/core/crc8gen.h
Removing include/osmocom/core/socket_compat.h
Removing include/osmocom/core/version.h
Removing include/osmocom/crypt/Makefile
Removing include/osmocom/crypt/Makefile.in
Removing include/osmocom/ctrl/Makefile
Removing include/osmocom/ctrl/Makefile.in
Removing include/osmocom/gprs/Makefile
Removing include/osmocom/gprs/Makefile.in
Removing include/osmocom/gprs/protocol/Makefile
Removing include/osmocom/gprs/protocol/Makefile.in
Removing include/osmocom/gsm/Makefile
Removing include/osmocom/gsm/Makefile.in
Removing include/osmocom/gsm/gsm0503.h
Removing include/osmocom/gsm/protocol/Makefile
Removing include/osmocom/gsm/protocol/Makefile.in
Removing include/osmocom/isdn/Makefile
Removing include/osmocom/isdn/Makefile.in
Removing include/osmocom/sim/Makefile
Removing include/osmocom/sim/Makefile.in
Removing include/osmocom/usb/Makefile
Removing include/osmocom/usb/Makefile.in
Removing include/osmocom/vty/Makefile
Removing include/osmocom/vty/Makefile.in
Removing install-sh
Removing libosmocodec.pc
Removing libosmocoding.pc
Removing libosmocore.pc
Removing libosmoctrl.pc
Removing libosmogb.pc
Removing libosmogsm.pc
Removing libosmoisdn.pc
Removing libosmosim.pc
Removing libosmousb.pc
Removing libosmovty.pc
Removing libtool
Removing ltmain.sh
Removing m4/libtool.m4
Removing m4/ltoptions.m4
Removing m4/ltsugar.m4
Removing m4/ltversion.m4
Removing m4/lt~obsolete.m4
Removing missing
Removing src/Makefile
Removing src/Makefile.in
Removing src/codec/.deps/
Removing src/codec/.libs/
Removing src/codec/Makefile
Removing src/codec/Makefile.in
Removing src/codec/ecu.lo
Removing src/codec/ecu_fr.lo
Removing src/codec/ecu_fr_old.lo
Removing src/codec/gsm610.lo
Removing src/codec/gsm620.lo
Removing src/codec/gsm660.lo
Removing src/codec/gsm690.lo
Removing src/codec/hr_sid_class.lo
Removing src/codec/libosmocodec.la
Removing src/coding/.deps/
Removing src/coding/.libs/
Removing src/coding/Makefile
Removing src/coding/Makefile.in
Removing src/coding/gsm0503_amr_dtx.lo
Removing src/coding/gsm0503_coding.lo
Removing src/coding/gsm0503_interleaving.lo
Removing src/coding/gsm0503_mapping.lo
Removing src/coding/gsm0503_parity.lo
Removing src/coding/gsm0503_tables.lo
Removing src/coding/libosmocoding.la
Removing src/core/.deps/
Removing src/core/.libs/
Removing src/core/Makefile
Removing src/core/Makefile.in
Removing src/core/application.lo
Removing src/core/backtrace.lo
Removing src/core/base64.lo
Removing src/core/bitcomp.lo
Removing src/core/bits.lo
Removing src/core/bitvec.lo
Removing src/core/context.lo
Removing src/core/conv.lo
Removing src/core/conv_acc.lo
Removing src/core/conv_acc_generic.lo
Removing src/core/conv_acc_sse.lo
Removing src/core/conv_acc_sse_avx.lo
Removing src/core/counter.lo
Removing src/core/crc16.lo
Removing src/core/crc16gen.c
Removing src/core/crc16gen.lo
Removing src/core/crc32gen.c
Removing src/core/crc32gen.lo
Removing src/core/crc64gen.c
Removing src/core/crc64gen.lo
Removing src/core/crc8gen.c
Removing src/core/crc8gen.lo
Removing src/core/exec.lo
Removing src/core/fsm.lo
Removing src/core/gsmtap_util.lo
Removing src/core/isdnhdlc.lo
Removing src/core/it_q.lo
Removing src/core/libosmocore.la
Removing src/core/logging.lo
Removing src/core/logging_gsmtap.lo
Removing src/core/logging_syslog.lo
Removing src/core/loggingrb.lo
Removing src/core/macaddr.lo
Removing src/core/mnl.lo
Removing src/core/msgb.lo
Removing src/core/msgfile.lo
Removing src/core/netdev.lo
Removing src/core/netns.lo
Removing src/core/osmo_io.lo
Removing src/core/osmo_io_poll.lo
Removing src/core/osmo_io_uring.lo
Removing src/core/panic.lo
Removing src/core/plugin.lo
Removing src/core/prbs.lo
Removing src/core/prim.lo
Removing src/core/rate_ctr.lo
Removing src/core/rbtree.lo
Removing src/core/select.lo
Removing src/core/sercomm.lo
Removing src/core/serial.lo
Removing src/core/signal.lo
Removing src/core/sockaddr_str.lo
Removing src/core/socket.lo
Removing src/core/soft_uart.lo
Removing src/core/stat_item.lo
Removing src/core/stats.lo
Removing src/core/stats_statsd.lo
Removing src/core/stats_tcp.lo
Removing src/core/strrb.lo
Removing src/core/tdef.lo
Removing src/core/thread.lo
Removing src/core/time_cc.lo
Removing src/core/timer.lo
Removing src/core/timer_clockgettime.lo
Removing src/core/timer_gettimeofday.lo
Removing src/core/tun.lo
Removing src/core/use_count.lo
Removing src/core/utils.lo
Removing src/core/write_queue.lo
Removing src/ctrl/.deps/
Removing src/ctrl/.libs/
Removing src/ctrl/Makefile
Removing src/ctrl/Makefile.in
Removing src/ctrl/control_cmd.lo
Removing src/ctrl/control_if.lo
Removing src/ctrl/control_vty.lo
Removing src/ctrl/fsm_ctrl_commands.lo
Removing src/ctrl/libosmoctrl.la
Removing src/gb/.deps/
Removing src/gb/.libs/
Removing src/gb/Makefile
Removing src/gb/Makefile.in
Removing src/gb/bssgp_bvc_fsm.lo
Removing src/gb/common_vty.lo
Removing src/gb/frame_relay.lo
Removing src/gb/gprs_bssgp.lo
Removing src/gb/gprs_bssgp2.lo
Removing src/gb/gprs_bssgp_bss.lo
Removing src/gb/gprs_bssgp_rim.lo
Removing src/gb/gprs_bssgp_util.lo
Removing src/gb/gprs_bssgp_vty.lo
Removing src/gb/gprs_ns.lo
Removing src/gb/gprs_ns2.lo
Removing src/gb/gprs_ns2_fr.lo
Removing src/gb/gprs_ns2_frgre.lo
Removing src/gb/gprs_ns2_message.lo
Removing src/gb/gprs_ns2_sns.lo
Removing src/gb/gprs_ns2_udp.lo
Removing src/gb/gprs_ns2_vc_fsm.lo
Removing src/gb/gprs_ns2_vty.lo
Removing src/gb/gprs_ns_frgre.lo
Removing src/gb/gprs_ns_sns.lo
Removing src/gb/gprs_ns_vty.lo
Removing src/gb/libosmogb-test.la
Removing src/gb/libosmogb.la
Removing src/gsm/.deps/
Removing src/gsm/.libs/
Removing src/gsm/Makefile
Removing src/gsm/Makefile.in
Removing src/gsm/a5.lo
Removing src/gsm/abis_nm.lo
Removing src/gsm/apn.lo
Removing src/gsm/auth_comp128v1.lo
Removing src/gsm/auth_comp128v23.lo
Removing src/gsm/auth_core.lo
Removing src/gsm/auth_milenage.lo
Removing src/gsm/auth_tuak.lo
Removing src/gsm/auth_xor.lo
Removing src/gsm/auth_xor_2g.lo
Removing src/gsm/bsslap.lo
Removing src/gsm/bssmap_le.lo
Removing src/gsm/bts_features.lo
Removing src/gsm/cbsp.lo
Removing src/gsm/comp128.lo
Removing src/gsm/comp128v23.lo
Removing src/gsm/gad.lo
Removing src/gsm/gan.lo
Removing src/gsm/gea.lo
Removing src/gsm/gprs_cipher_core.lo
Removing src/gsm/gprs_gea.lo
Removing src/gsm/gprs_rlc.lo
Removing src/gsm/gsm0341.lo
Removing src/gsm/gsm0411_smc.lo
Removing src/gsm/gsm0411_smr.lo
Removing src/gsm/gsm0411_utils.lo
Removing src/gsm/gsm0414.lo
Removing src/gsm/gsm0480.lo
Removing src/gsm/gsm0502.lo
Removing src/gsm/gsm0503_conv.c
Removing src/gsm/gsm0503_conv.lo
Removing src/gsm/gsm0808.lo
Removing src/gsm/gsm0808_utils.lo
Removing src/gsm/gsm23003.lo
Removing src/gsm/gsm23236.lo
Removing src/gsm/gsm29118.lo
Removing src/gsm/gsm29205.lo
Removing src/gsm/gsm44021.lo
Removing src/gsm/gsm44068.lo
Removing src/gsm/gsm48.lo
Removing src/gsm/gsm48049.lo
Removing src/gsm/gsm48_arfcn_range_encode.lo
Removing src/gsm/gsm48_ie.lo
Removing src/gsm/gsm48_rest_octets.lo
Removing src/gsm/gsm_04_08_gprs.lo
Removing src/gsm/gsm_utils.lo
Removing src/gsm/gsup.lo
Removing src/gsm/gsup_sms.lo
Removing src/gsm/ipa.lo
Removing src/gsm/iuup.lo
Removing src/gsm/kasumi.lo
Removing src/gsm/kdf.lo
Removing src/gsm/kdf/.deps/
Removing src/gsm/lapdm.lo
Removing src/gsm/libgsmint.la
Removing src/gsm/libosmogsm.la
Removing src/gsm/milenage/.deps/
Removing src/gsm/milenage/.dirstamp
Removing src/gsm/milenage/.libs/
Removing src/gsm/milenage/aes-encblock.lo
Removing src/gsm/milenage/aes-internal-enc.lo
Removing src/gsm/milenage/aes-internal.lo
Removing src/gsm/milenage/milenage.lo
Removing src/gsm/mncc.lo
Removing src/gsm/oap.lo
Removing src/gsm/oap_client.lo
Removing src/gsm/rlp.lo
Removing src/gsm/rsl.lo
Removing src/gsm/rxlev_stat.lo
Removing src/gsm/sysinfo.lo
Removing src/gsm/tlv_parser.lo
Removing src/gsm/tuak/.deps/
Removing src/gsm/tuak/.dirstamp
Removing src/gsm/tuak/.libs/
Removing src/gsm/tuak/KeccakP-1600-3gpp.lo
Removing src/gsm/tuak/tuak.lo
Removing src/isdn/.deps/
Removing src/isdn/.libs/
Removing src/isdn/Makefile
Removing src/isdn/Makefile.in
Removing src/isdn/i460_mux.lo
Removing src/isdn/lapd_core.lo
Removing src/isdn/libisdnint.la
Removing src/isdn/libosmoisdn.la
Removing src/isdn/v110.lo
Removing src/isdn/v110_ta.lo
Removing src/pseudotalloc/.deps/
Removing src/pseudotalloc/Makefile
Removing src/pseudotalloc/Makefile.in
Removing src/sim/.deps/
Removing src/sim/.libs/
Removing src/sim/Makefile
Removing src/sim/Makefile.in
Removing src/sim/card_fs_hpsim.lo
Removing src/sim/card_fs_isim.lo
Removing src/sim/card_fs_sim.lo
Removing src/sim/card_fs_tetra.lo
Removing src/sim/card_fs_uicc.lo
Removing src/sim/card_fs_usim.lo
Removing src/sim/class_tables.lo
Removing src/sim/core.lo
Removing src/sim/libosmosim.la
Removing src/sim/reader.lo
Removing src/sim/reader_pcsc.lo
Removing src/usb/.deps/
Removing src/usb/.libs/
Removing src/usb/Makefile
Removing src/usb/Makefile.in
Removing src/usb/libosmousb.la
Removing src/usb/osmo_libusb.lo
Removing src/vty/.deps/
Removing src/vty/.libs/
Removing src/vty/Makefile
Removing src/vty/Makefile.in
Removing src/vty/buffer.lo
Removing src/vty/command.lo
Removing src/vty/cpu_sched_vty.lo
Removing src/vty/fsm_vty.lo
Removing src/vty/libosmovty.la
Removing src/vty/logging_vty.lo
Removing src/vty/misc_vty.lo
Removing src/vty/stats_vty.lo
Removing src/vty/talloc_ctx_vty.lo
Removing src/vty/tdef_vty.lo
Removing src/vty/telnet_interface.lo
Removing src/vty/utils.lo
Removing src/vty/vector.lo
Removing src/vty/vty.lo
Removing stamp-h1
Removing tapset/Makefile
Removing tapset/Makefile.in
Removing tests/.deps/
Removing tests/Makefile
Removing tests/Makefile.in
Removing tests/a5/.deps/
Removing tests/abis/.deps/
Removing tests/atconfig
Removing tests/auth/.deps/
Removing tests/base64/.deps/
Removing tests/bitgen/.deps/
Removing tests/bits/.deps/
Removing tests/bitvec/.deps/
Removing tests/bsslap/.deps/
Removing tests/bssmap_le/.deps/
Removing tests/codec/.deps/
Removing tests/coding/.deps/
Removing tests/comp128/.deps/
Removing tests/context/.deps/
Removing tests/conv/.deps/
Removing tests/conv/gsm0503_test_vectors.c
Removing tests/ctrl/.deps/
Removing tests/dtx/.deps/
Removing tests/endian/.deps/
Removing tests/exec/.deps/
Removing tests/fr/.deps/
Removing tests/fsm/.deps/
Removing tests/gad/.deps/
Removing tests/gb/.deps/
Removing tests/gea/.deps/
Removing tests/gprs/.deps/
Removing tests/gsm0408/.deps/
Removing tests/gsm0502/.deps/
Removing tests/gsm0808/.deps/
Removing tests/gsm23003/.deps/
Removing tests/gsm23236/.deps/
Removing tests/gsm29205/.deps/
Removing tests/gsm44021/.deps/
Removing tests/gsm48/.deps/
Removing tests/gsup/.deps/
Removing tests/i460_mux/.deps/
Removing tests/it_q/.deps/
Removing tests/iuup/.deps/
Removing tests/jhash/.deps/
Removing tests/kasumi/.deps/
Removing tests/lapd/.deps/
Removing tests/logging/.deps/
Removing tests/loggingrb/.deps/
Removing tests/msgb/.deps/
Removing tests/msgfile/.deps/
Removing tests/oap/.deps/
Removing tests/osmo-config-merge/Makefile
Removing tests/osmo-config-merge/Makefile.in
Removing tests/osmo-config-merge/atconfig
Removing tests/osmo_io/.deps/
Removing tests/prbs/.deps/
Removing tests/rlp/.deps/
Removing tests/sercomm/.deps/
Removing tests/sim/.deps/
Removing tests/sms/.deps/
Removing tests/smscb/.deps/
Removing tests/sockaddr_str/.deps/
Removing tests/socket/.deps/
Removing tests/soft_uart/.deps/
Removing tests/stats/.deps/
Removing tests/strrb/.deps/
Removing tests/tdef/.deps/
Removing tests/time_cc/.deps/
Removing tests/timer/.deps/
Removing tests/tlv/.deps/
Removing tests/use_count/.deps/
Removing tests/ussd/.deps/
Removing tests/utils/.deps/
Removing tests/v110/.deps/
Removing tests/vty/.deps/
Removing tests/write_queue/.deps/
Removing utils/.deps/
Removing utils/.libs/
Removing utils/Makefile
Removing utils/Makefile.in
Removing utils/__pycache__/
Removing utils/gsmtap-logsend.o
Removing utils/osmo-aka-verify
Removing utils/osmo-aka-verify.o
Removing utils/osmo-arfcn
Removing utils/osmo-arfcn.o
Removing utils/osmo-auc-gen
Removing utils/osmo-auc-gen.o
Removing utils/osmo-config-merge
Removing utils/osmo-config-merge.o
Removing utils/osmo-gsmtap-logsend
Removing utils/osmo-ns-dummy
Removing utils/osmo-ns-dummy-vty.o
Removing utils/osmo-ns-dummy.o
Removing utils/osmo-sim-test
Removing utils/osmo-stat-dummy/.deps/
Removing utils/osmo-stat-dummy/Makefile
Removing utils/osmo-stat-dummy/Makefile.in
Removing utils/osmo_sim_test-osmo-sim-test.o
+ [ -d layer1-headers ]
[osmocom-master] $ /bin/sh -xe /tmp/jenkins6775992967714238489.sh
+ [ False != True ]
+ rm -rf /home/osmocom-build/jenkins/workspace/master-osmo-gbproxy/a1/default/a2/default/a3/default/a4/default/label/osmocom-master
+ mkdir -p /home/osmocom-build/jenkins/workspace/master-osmo-gbproxy/a1/default/a2/default/a3/default/a4/default/label/osmocom-master
$ ssh-agent -k
unset SSH_AUTH_SOCK;
unset SSH_AGENT_PID;
echo Agent pid 2672018 killed;
[ssh-agent] Stopped.
Archiving artifacts
‘**/core’ doesn’t match anything: ‘**’ exists but not ‘**/core’
No artifacts found that match the file pattern "**/core, **/testsuite.log, **/workspace.tar.xz, **/app-release.apk, **/applet.cap". Configuration error?
Finished: SUCCESS
![[Jenkins]](/jenkins/static/433051ca/images/svgs/logo.svg){kind=logo}
