Skipping 448 KB.. Full Log

#15 122.9 Preparing to unpack .../519-libboost-timer-dev_1.74.0.3_amd64.deb ...
#15 122.9 Unpacking libboost-timer-dev:amd64 (1.74.0.3) ...
#15 123.0 Selecting previously unselected package libboost-type-erasure1.74.0:amd64.
#15 123.0 Preparing to unpack .../520-libboost-type-erasure1.74.0_1.74.0+ds1-21_amd64.deb ...
#15 123.1 Unpacking libboost-type-erasure1.74.0:amd64 (1.74.0+ds1-21) ...
#15 123.2 Selecting previously unselected package libboost-type-erasure1.74-dev:amd64.
#15 123.2 Preparing to unpack .../521-libboost-type-erasure1.74-dev_1.74.0+ds1-21_amd64.deb ...
#15 123.2 Unpacking libboost-type-erasure1.74-dev:amd64 (1.74.0+ds1-21) ...
#15 123.3 Selecting previously unselected package libboost-type-erasure-dev:amd64.
#15 123.4 Preparing to unpack .../522-libboost-type-erasure-dev_1.74.0.3_amd64.deb ...
#15 123.4 Unpacking libboost-type-erasure-dev:amd64 (1.74.0.3) ...
#15 123.5 Selecting previously unselected package libboost-wave1.74.0:amd64.
#15 123.5 Preparing to unpack .../523-libboost-wave1.74.0_1.74.0+ds1-21_amd64.deb ...
#15 123.5 Unpacking libboost-wave1.74.0:amd64 (1.74.0+ds1-21) ...
#15 123.7 Selecting previously unselected package libboost-wave1.74-dev:amd64.
#15 123.7 Preparing to unpack .../524-libboost-wave1.74-dev_1.74.0+ds1-21_amd64.deb ...
#15 123.7 Unpacking libboost-wave1.74-dev:amd64 (1.74.0+ds1-21) ...
#15 123.8 Selecting previously unselected package libboost-wave-dev:amd64.
#15 123.9 Preparing to unpack .../525-libboost-wave-dev_1.74.0.3_amd64.deb ...
#15 123.9 Unpacking libboost-wave-dev:amd64 (1.74.0.3) ...
#15 124.1 Selecting previously unselected package libboost-nowide1.74.0.
#15 124.1 Preparing to unpack .../526-libboost-nowide1.74.0_1.74.0+ds1-21_amd64.deb ...
#15 124.2 Unpacking libboost-nowide1.74.0 (1.74.0+ds1-21) ...
#15 124.3 Selecting previously unselected package libboost-nowide1.74-dev.
#15 124.3 Preparing to unpack .../527-libboost-nowide1.74-dev_1.74.0+ds1-21_amd64.deb ...
#15 124.3 Unpacking libboost-nowide1.74-dev (1.74.0+ds1-21) ...
#15 124.5 Selecting previously unselected package libboost-nowide-dev.
#15 124.5 Preparing to unpack .../528-libboost-nowide-dev_1.74.0.3_amd64.deb ...
#15 124.5 Unpacking libboost-nowide-dev (1.74.0.3) ...
#15 124.6 Selecting previously unselected package libboost-all-dev.
#15 124.6 Preparing to unpack .../529-libboost-all-dev_1.74.0.3_amd64.deb ...
#15 124.7 Unpacking libboost-all-dev (1.74.0.3) ...
#15 124.8 Selecting previously unselected package libmd-dev:amd64.
#15 124.8 Preparing to unpack .../530-libmd-dev_1.0.4-2_amd64.deb ...
#15 124.8 Unpacking libmd-dev:amd64 (1.0.4-2) ...
#15 124.9 Selecting previously unselected package libbsd-dev:amd64.
#15 124.9 Preparing to unpack .../531-libbsd-dev_0.11.7-2_amd64.deb ...
#15 125.0 Unpacking libbsd-dev:amd64 (0.11.7-2) ...
#15 125.1 Selecting previously unselected package libc-ares2:amd64.
#15 125.1 Preparing to unpack .../532-libc-ares2_1.18.1-3_amd64.deb ...
#15 125.2 Unpacking libc-ares2:amd64 (1.18.1-3) ...
#15 125.3 Selecting previously unselected package libc-ares-dev:amd64.
#15 125.3 Preparing to unpack .../533-libc-ares-dev_1.18.1-3_amd64.deb ...
#15 125.3 Unpacking libc-ares-dev:amd64 (1.18.1-3) ...
#15 125.5 Selecting previously unselected package libcairo-gobject2:amd64.
#15 125.5 Preparing to unpack .../534-libcairo-gobject2_1.16.0-7_amd64.deb ...
#15 125.5 Unpacking libcairo-gobject2:amd64 (1.16.0-7) ...
#15 125.7 Selecting previously unselected package libncurses6:amd64.
#15 125.7 Preparing to unpack .../535-libncurses6_6.4-4_amd64.deb ...
#15 125.7 Unpacking libncurses6:amd64 (6.4-4) ...
#15 125.8 Selecting previously unselected package libcdk5nc6:amd64.
#15 125.8 Preparing to unpack .../536-libcdk5nc6_5.0.20180306-3_amd64.deb ...
#15 125.8 Unpacking libcdk5nc6:amd64 (5.0.20180306-3) ...
#15 126.0 Selecting previously unselected package libncurses-dev:amd64.
#15 126.0 Preparing to unpack .../537-libncurses-dev_6.4-4_amd64.deb ...
#15 126.0 Unpacking libncurses-dev:amd64 (6.4-4) ...
#15 126.2 Selecting previously unselected package libcdk5-dev.
#15 126.2 Preparing to unpack .../538-libcdk5-dev_5.0.20180306-3_amd64.deb ...
#15 126.2 Unpacking libcdk5-dev (5.0.20180306-3) ...
#15 126.4 Selecting previously unselected package libcsv3:amd64.
#15 126.4 Preparing to unpack .../539-libcsv3_3.0.3+dfsg-6_amd64.deb ...
#15 126.4 Unpacking libcsv3:amd64 (3.0.3+dfsg-6) ...
#15 126.5 Selecting previously unselected package libcsv-dev:amd64.
#15 126.5 Preparing to unpack .../540-libcsv-dev_3.0.3+dfsg-6_amd64.deb ...
#15 126.5 Unpacking libcsv-dev:amd64 (3.0.3+dfsg-6) ...
#15 126.7 Selecting previously unselected package libdbi1:amd64.
#15 126.7 Preparing to unpack .../541-libdbi1_0.9.0-6_amd64.deb ...
#15 126.7 Unpacking libdbi1:amd64 (0.9.0-6) ...
#15 126.8 Selecting previously unselected package libdbd-sqlite3:amd64.
#15 126.9 Preparing to unpack .../542-libdbd-sqlite3_0.9.0-11_amd64.deb ...
#15 126.9 Unpacking libdbd-sqlite3:amd64 (0.9.0-11) ...
#15 127.0 Selecting previously unselected package libdbi-dev.
#15 127.0 Preparing to unpack .../543-libdbi-dev_0.9.0-6_amd64.deb ...
#15 127.0 Unpacking libdbi-dev (0.9.0-6) ...
#15 127.1 Selecting previously unselected package libpkgconf3:amd64.
#15 127.1 Preparing to unpack .../544-libpkgconf3_1.8.1-1_amd64.deb ...
#15 127.1 Unpacking libpkgconf3:amd64 (1.8.1-1) ...
#15 127.2 Selecting previously unselected package pkgconf-bin.
#15 127.2 Preparing to unpack .../545-pkgconf-bin_1.8.1-1_amd64.deb ...
#15 127.2 Unpacking pkgconf-bin (1.8.1-1) ...
#15 127.3 Selecting previously unselected package pkgconf:amd64.
#15 127.3 Preparing to unpack .../546-pkgconf_1.8.1-1_amd64.deb ...
#15 127.4 Unpacking pkgconf:amd64 (1.8.1-1) ...
#15 127.5 Selecting previously unselected package pkg-config:amd64.
#15 127.5 Preparing to unpack .../547-pkg-config_1.8.1-1_amd64.deb ...
#15 127.5 Unpacking pkg-config:amd64 (1.8.1-1) ...
#15 127.6 Selecting previously unselected package libdbus-1-dev:amd64.
#15 127.6 Preparing to unpack .../548-libdbus-1-dev_1.14.10-1~deb12u1_amd64.deb ...
#15 127.6 Unpacking libdbus-1-dev:amd64 (1.14.10-1~deb12u1) ...
#15 127.8 Selecting previously unselected package libelf-dev:amd64.
#15 127.8 Preparing to unpack .../549-libelf-dev_0.188-2.1_amd64.deb ...
#15 127.8 Unpacking libelf-dev:amd64 (0.188-2.1) ...
#15 127.9 Selecting previously unselected package libffi-dev:amd64.
#15 127.9 Preparing to unpack .../550-libffi-dev_3.4.4-1_amd64.deb ...
#15 127.9 Unpacking libffi-dev:amd64 (3.4.4-1) ...
#15 128.1 Selecting previously unselected package libfftw3-double3:amd64.
#15 128.1 Preparing to unpack .../551-libfftw3-double3_3.3.10-1_amd64.deb ...
#15 128.1 Unpacking libfftw3-double3:amd64 (3.3.10-1) ...
#15 128.3 Selecting previously unselected package libfftw3-long3:amd64.
#15 128.3 Preparing to unpack .../552-libfftw3-long3_3.3.10-1_amd64.deb ...
#15 128.3 Unpacking libfftw3-long3:amd64 (3.3.10-1) ...
#15 128.5 Selecting previously unselected package libfftw3-quad3:amd64.
#15 128.5 Preparing to unpack .../553-libfftw3-quad3_3.3.10-1_amd64.deb ...
#15 128.5 Unpacking libfftw3-quad3:amd64 (3.3.10-1) ...
#15 128.6 Selecting previously unselected package libfftw3-single3:amd64.
#15 128.6 Preparing to unpack .../554-libfftw3-single3_3.3.10-1_amd64.deb ...
#15 128.7 Unpacking libfftw3-single3:amd64 (3.3.10-1) ...
#15 128.8 Selecting previously unselected package libfftw3-bin.
#15 128.8 Preparing to unpack .../555-libfftw3-bin_3.3.10-1_amd64.deb ...
#15 128.8 Unpacking libfftw3-bin (3.3.10-1) ...
#15 129.0 Selecting previously unselected package libfftw3-dev:amd64.
#15 129.0 Preparing to unpack .../556-libfftw3-dev_3.3.10-1_amd64.deb ...
#15 129.0 Unpacking libfftw3-dev:amd64 (3.3.10-1) ...
#15 129.2 Selecting previously unselected package libgdk-pixbuf2.0-common.
#15 129.2 Preparing to unpack .../557-libgdk-pixbuf2.0-common_2.42.10+dfsg-1+deb12u1_all.deb ...
#15 129.2 Unpacking libgdk-pixbuf2.0-common (2.42.10+dfsg-1+deb12u1) ...
#15 129.4 Selecting previously unselected package shared-mime-info.
#15 129.4 Preparing to unpack .../558-shared-mime-info_2.2-1_amd64.deb ...
#15 129.4 Unpacking shared-mime-info (2.2-1) ...
#15 129.6 Selecting previously unselected package libgdk-pixbuf-2.0-0:amd64.
#15 129.6 Preparing to unpack .../559-libgdk-pixbuf-2.0-0_2.42.10+dfsg-1+deb12u1_amd64.deb ...
#15 129.7 Unpacking libgdk-pixbuf-2.0-0:amd64 (2.42.10+dfsg-1+deb12u1) ...
#15 129.8 Selecting previously unselected package libglib2.0-data.
#15 129.8 Preparing to unpack .../560-libglib2.0-data_2.74.6-2+deb12u5_all.deb ...
#15 129.8 Unpacking libglib2.0-data (2.74.6-2+deb12u5) ...
#15 130.0 Selecting previously unselected package libglib2.0-bin.
#15 130.0 Preparing to unpack .../561-libglib2.0-bin_2.74.6-2+deb12u5_amd64.deb ...
#15 130.0 Unpacking libglib2.0-bin (2.74.6-2+deb12u5) ...
#15 130.2 Selecting previously unselected package libglib2.0-dev-bin.
#15 130.2 Preparing to unpack .../562-libglib2.0-dev-bin_2.74.6-2+deb12u5_amd64.deb ...
#15 130.2 Unpacking libglib2.0-dev-bin (2.74.6-2+deb12u5) ...
#15 130.4 Selecting previously unselected package libsepol-dev:amd64.
#15 130.4 Preparing to unpack .../563-libsepol-dev_3.4-2.1_amd64.deb ...
#15 130.4 Unpacking libsepol-dev:amd64 (3.4-2.1) ...
#15 130.5 Selecting previously unselected package libpcre2-16-0:amd64.
#15 130.6 Preparing to unpack .../564-libpcre2-16-0_10.42-1_amd64.deb ...
#15 130.6 Unpacking libpcre2-16-0:amd64 (10.42-1) ...
#15 130.7 Selecting previously unselected package libpcre2-32-0:amd64.
#15 130.7 Preparing to unpack .../565-libpcre2-32-0_10.42-1_amd64.deb ...
#15 130.8 Unpacking libpcre2-32-0:amd64 (10.42-1) ...
#15 130.9 Selecting previously unselected package libpcre2-posix3:amd64.
#15 130.9 Preparing to unpack .../566-libpcre2-posix3_10.42-1_amd64.deb ...
#15 131.0 Unpacking libpcre2-posix3:amd64 (10.42-1) ...
#15 131.1 Selecting previously unselected package libpcre2-dev:amd64.
#15 131.1 Preparing to unpack .../567-libpcre2-dev_10.42-1_amd64.deb ...
#15 131.1 Unpacking libpcre2-dev:amd64 (10.42-1) ...
#15 131.3 Selecting previously unselected package libselinux1-dev:amd64.
#15 131.3 Preparing to unpack .../568-libselinux1-dev_3.4-1+b6_amd64.deb ...
#15 131.3 Unpacking libselinux1-dev:amd64 (3.4-1+b6) ...
#15 131.4 Selecting previously unselected package libmount-dev:amd64.
#15 131.4 Preparing to unpack .../569-libmount-dev_2.38.1-5+deb12u3_amd64.deb ...
#15 131.5 Unpacking libmount-dev:amd64 (2.38.1-5+deb12u3) ...
#15 131.6 Selecting previously unselected package libglib2.0-dev:amd64.
#15 131.6 Preparing to unpack .../570-libglib2.0-dev_2.74.6-2+deb12u5_amd64.deb ...
#15 131.6 Unpacking libglib2.0-dev:amd64 (2.74.6-2+deb12u5) ...
#15 131.8 Selecting previously unselected package libgmpxx4ldbl:amd64.
#15 131.8 Preparing to unpack .../571-libgmpxx4ldbl_2%3a6.2.1+dfsg1-1.1_amd64.deb ...
#15 131.8 Unpacking libgmpxx4ldbl:amd64 (2:6.2.1+dfsg1-1.1) ...
#15 132.0 Selecting previously unselected package libgmp-dev:amd64.
#15 132.0 Preparing to unpack .../572-libgmp-dev_2%3a6.2.1+dfsg1-1.1_amd64.deb ...
#15 132.0 Unpacking libgmp-dev:amd64 (2:6.2.1+dfsg1-1.1) ...
#15 132.1 Selecting previously unselected package libunbound8:amd64.
#15 132.1 Preparing to unpack .../573-libunbound8_1.17.1-2+deb12u2_amd64.deb ...
#15 132.2 Unpacking libunbound8:amd64 (1.17.1-2+deb12u2) ...
#15 132.3 Selecting previously unselected package libgnutls-dane0:amd64.
#15 132.3 Preparing to unpack .../574-libgnutls-dane0_3.7.9-2+deb12u3_amd64.deb ...
#15 132.3 Unpacking libgnutls-dane0:amd64 (3.7.9-2+deb12u3) ...
#15 132.4 Selecting previously unselected package libgnutls-openssl27:amd64.
#15 132.4 Preparing to unpack .../575-libgnutls-openssl27_3.7.9-2+deb12u3_amd64.deb ...
#15 132.4 Unpacking libgnutls-openssl27:amd64 (3.7.9-2+deb12u3) ...
#15 132.6 Selecting previously unselected package libgnutlsxx30:amd64.
#15 132.6 Preparing to unpack .../576-libgnutlsxx30_3.7.9-2+deb12u3_amd64.deb ...
#15 132.6 Unpacking libgnutlsxx30:amd64 (3.7.9-2+deb12u3) ...
#15 132.7 Selecting previously unselected package libidn2-dev:amd64.
#15 132.7 Preparing to unpack .../577-libidn2-dev_2.3.3-1+b1_amd64.deb ...
#15 132.8 Unpacking libidn2-dev:amd64 (2.3.3-1+b1) ...
#15 132.9 Selecting previously unselected package libp11-kit-dev:amd64.
#15 132.9 Preparing to unpack .../578-libp11-kit-dev_0.24.1-2_amd64.deb ...
#15 132.9 Unpacking libp11-kit-dev:amd64 (0.24.1-2) ...
#15 133.0 Selecting previously unselected package libtasn1-6-dev:amd64.
#15 133.0 Preparing to unpack .../579-libtasn1-6-dev_4.19.0-2_amd64.deb ...
#15 133.1 Unpacking libtasn1-6-dev:amd64 (4.19.0-2) ...
#15 133.2 Selecting previously unselected package nettle-dev:amd64.
#15 133.2 Preparing to unpack .../580-nettle-dev_3.8.1-2_amd64.deb ...
#15 133.2 Unpacking nettle-dev:amd64 (3.8.1-2) ...
#15 133.3 Selecting previously unselected package libgnutls28-dev:amd64.
#15 133.4 Preparing to unpack .../581-libgnutls28-dev_3.7.9-2+deb12u3_amd64.deb ...
#15 133.4 Unpacking libgnutls28-dev:amd64 (3.7.9-2+deb12u3) ...
#15 133.6 Selecting previously unselected package libgps28:amd64.
#15 133.6 Preparing to unpack .../582-libgps28_3.22-4.1+b1_amd64.deb ...
#15 133.6 Unpacking libgps28:amd64 (3.22-4.1+b1) ...
#15 133.7 Selecting previously unselected package libgps-dev:amd64.
#15 133.7 Preparing to unpack .../583-libgps-dev_3.22-4.1+b1_amd64.deb ...
#15 133.7 Unpacking libgps-dev:amd64 (3.22-4.1+b1) ...
#15 133.9 Selecting previously unselected package libgsm1:amd64.
#15 133.9 Preparing to unpack .../584-libgsm1_1.0.22-1_amd64.deb ...
#15 133.9 Unpacking libgsm1:amd64 (1.0.22-1) ...
#15 134.0 Selecting previously unselected package libgsm1-dev:amd64.
#15 134.1 Preparing to unpack .../585-libgsm1-dev_1.0.22-1_amd64.deb ...
#15 134.1 Unpacking libgsm1-dev:amd64 (1.0.22-1) ...
#15 134.3 Selecting previously unselected package libimagequant0:amd64.
#15 134.3 Preparing to unpack .../586-libimagequant0_2.17.0-1_amd64.deb ...
#15 134.3 Unpacking libimagequant0:amd64 (2.17.0-1) ...
#15 134.4 Selecting previously unselected package libjansson-dev:amd64.
#15 134.4 Preparing to unpack .../587-libjansson-dev_2.14-2_amd64.deb ...
#15 134.5 Unpacking libjansson-dev:amd64 (2.14-2) ...
#15 134.6 Selecting previously unselected package libkrb5-dev:amd64.
#15 134.6 Preparing to unpack .../588-libkrb5-dev_1.20.1-2+deb12u2_amd64.deb ...
#15 134.6 Unpacking libkrb5-dev:amd64 (1.20.1-2+deb12u2) ...
#15 134.8 Selecting previously unselected package liblua5.3-0:amd64.
#15 134.8 Preparing to unpack .../589-liblua5.3-0_5.3.6-2_amd64.deb ...
#15 134.8 Unpacking liblua5.3-0:amd64 (5.3.6-2) ...
#15 134.9 Selecting previously unselected package libreadline-dev:amd64.
#15 134.9 Preparing to unpack .../590-libreadline-dev_8.2-1.3_amd64.deb ...
#15 134.9 Unpacking libreadline-dev:amd64 (8.2-1.3) ...
#15 135.1 Selecting previously unselected package liblua5.3-dev:amd64.
#15 135.1 Preparing to unpack .../591-liblua5.3-dev_5.3.6-2_amd64.deb ...
#15 135.1 Unpacking liblua5.3-dev:amd64 (5.3.6-2) ...
#15 135.3 Selecting previously unselected package mysql-common.
#15 135.3 Preparing to unpack .../592-mysql-common_5.8+1.1.0_all.deb ...
#15 135.3 Unpacking mysql-common (5.8+1.1.0) ...
#15 135.5 Selecting previously unselected package mariadb-common.
#15 135.5 Preparing to unpack .../593-mariadb-common_1%3a10.11.6-0+deb12u1_all.deb ...
#15 135.5 Unpacking mariadb-common (1:10.11.6-0+deb12u1) ...
#15 135.6 Selecting previously unselected package libmariadb3:amd64.
#15 135.6 Preparing to unpack .../594-libmariadb3_1%3a10.11.6-0+deb12u1_amd64.deb ...
#15 135.7 Unpacking libmariadb3:amd64 (1:10.11.6-0+deb12u1) ...
#15 135.8 Selecting previously unselected package libmnl-dev:amd64.
#15 135.8 Preparing to unpack .../595-libmnl-dev_1.0.4-3_amd64.deb ...
#15 135.8 Unpacking libmnl-dev:amd64 (1.0.4-3) ...
#15 135.9 Selecting previously unselected package libncurses5-dev:amd64.
#15 136.0 Preparing to unpack .../596-libncurses5-dev_6.4-4_amd64.deb ...
#15 136.0 Unpacking libncurses5-dev:amd64 (6.4-4) ...
#15 136.1 Selecting previously unselected package pci.ids.
#15 136.1 Preparing to unpack .../597-pci.ids_0.0~2023.04.11-1_all.deb ...
#15 136.1 Unpacking pci.ids (0.0~2023.04.11-1) ...
#15 136.3 Selecting previously unselected package libpci3:amd64.
#15 136.3 Preparing to unpack .../598-libpci3_1%3a3.9.0-4_amd64.deb ...
#15 136.3 Unpacking libpci3:amd64 (1:3.9.0-4) ...
#15 136.4 Selecting previously unselected package libsensors-config.
#15 136.5 Preparing to unpack .../599-libsensors-config_1%3a3.6.0-7.1_all.deb ...
#15 136.5 Unpacking libsensors-config (1:3.6.0-7.1) ...
#15 136.6 Selecting previously unselected package libsensors5:amd64.
#15 136.6 Preparing to unpack .../600-libsensors5_1%3a3.6.0-7.1_amd64.deb ...
#15 136.7 Unpacking libsensors5:amd64 (1:3.6.0-7.1) ...
#15 136.9 Selecting previously unselected package libwrap0:amd64.
#15 136.9 Preparing to unpack .../601-libwrap0_7.6.q-32_amd64.deb ...
#15 136.9 Unpacking libwrap0:amd64 (7.6.q-32) ...
#15 137.1 Selecting previously unselected package libsnmp-base.
#15 137.1 Preparing to unpack .../602-libsnmp-base_5.9.3+dfsg-2_all.deb ...
#15 137.1 Unpacking libsnmp-base (5.9.3+dfsg-2) ...
#15 137.2 Selecting previously unselected package libsnmp40:amd64.
#15 137.3 Preparing to unpack .../603-libsnmp40_5.9.3+dfsg-2_amd64.deb ...
#15 137.3 Unpacking libsnmp40:amd64 (5.9.3+dfsg-2) ...
#15 137.5 Selecting previously unselected package libnetsnmptrapd40:amd64.
#15 137.5 Preparing to unpack .../604-libnetsnmptrapd40_5.9.3+dfsg-2_amd64.deb ...
#15 137.5 Unpacking libnetsnmptrapd40:amd64 (5.9.3+dfsg-2) ...
#15 137.6 Selecting previously unselected package libnewlib-dev.
#15 137.6 Preparing to unpack .../605-libnewlib-dev_3.3.0-1.3+deb12u1_all.deb ...
#15 137.7 Unpacking libnewlib-dev (3.3.0-1.3+deb12u1) ...
#15 137.8 Selecting previously unselected package libnewlib-arm-none-eabi.
#15 137.8 Preparing to unpack .../606-libnewlib-arm-none-eabi_3.3.0-1.3+deb12u1_all.deb ...
#15 137.8 Unpacking libnewlib-arm-none-eabi (3.3.0-1.3+deb12u1) ...
#15 138.8 Selecting previously unselected package libnftnl11:amd64.
#15 138.8 Preparing to unpack .../607-libnftnl11_1.2.4-2_amd64.deb ...
#15 138.8 Unpacking libnftnl11:amd64 (1.2.4-2) ...
#15 138.9 Selecting previously unselected package libnftables1:amd64.
#15 138.9 Preparing to unpack .../608-libnftables1_1.0.6-2+deb12u2_amd64.deb ...
#15 139.0 Unpacking libnftables1:amd64 (1.0.6-2+deb12u2) ...
#15 139.1 Selecting previously unselected package libnftables-dev:amd64.
#15 139.1 Preparing to unpack .../609-libnftables-dev_1.0.6-2+deb12u2_amd64.deb ...
#15 139.1 Unpacking libnftables-dev:amd64 (1.0.6-2+deb12u2) ...
#15 139.3 Selecting previously unselected package libnftnl-dev:amd64.
#15 139.3 Preparing to unpack .../610-libnftnl-dev_1.2.4-2_amd64.deb ...
#15 139.3 Unpacking libnftnl-dev:amd64 (1.2.4-2) ...
#15 139.5 Selecting previously unselected package libnorm1:amd64.
#15 139.5 Preparing to unpack .../611-libnorm1_1.5.9+dfsg-2_amd64.deb ...
#15 139.5 Unpacking libnorm1:amd64 (1.5.9+dfsg-2) ...
#15 139.6 Selecting previously unselected package libxml2-dev:amd64.
#15 139.6 Preparing to unpack .../612-libxml2-dev_2.9.14+dfsg-1.3~deb12u1_amd64.deb ...
#15 139.7 Unpacking libxml2-dev:amd64 (2.9.14+dfsg-1.3~deb12u1) ...
#15 139.8 Selecting previously unselected package libnorm-dev:amd64.
#15 139.8 Preparing to unpack .../613-libnorm-dev_1.5.9+dfsg-2_amd64.deb ...
#15 139.8 Unpacking libnorm-dev:amd64 (1.5.9+dfsg-2) ...
#15 140.0 Selecting previously unselected package liboping0:amd64.
#15 140.0 Preparing to unpack .../614-liboping0_1.10.0-5+b1_amd64.deb ...
#15 140.0 Unpacking liboping0:amd64 (1.10.0-5+b1) ...
#15 140.2 Selecting previously unselected package liboping-dev:amd64.
#15 140.2 Preparing to unpack .../615-liboping-dev_1.10.0-5+b1_amd64.deb ...
#15 140.2 Unpacking liboping-dev:amd64 (1.10.0-5+b1) ...
#15 140.3 Selecting previously unselected package libortp16:amd64.
#15 140.3 Preparing to unpack .../616-libortp16_1%3a5.1.64-2_amd64.deb ...
#15 140.3 Unpacking libortp16:amd64 (1:5.1.64-2) ...
#15 140.4 Selecting previously unselected package libortp-dev:amd64.
#15 140.4 Preparing to unpack .../617-libortp-dev_1%3a5.1.64-2_amd64.deb ...
#15 140.4 Unpacking libortp-dev:amd64 (1:5.1.64-2) ...
#15 140.5 Selecting previously unselected package libpcap0.8:amd64.
#15 140.6 Preparing to unpack .../618-libpcap0.8_1.10.3-1_amd64.deb ...
#15 140.6 Unpacking libpcap0.8:amd64 (1.10.3-1) ...
#15 140.7 Selecting previously unselected package libpcap0.8-dev:amd64.
#15 140.7 Preparing to unpack .../619-libpcap0.8-dev_1.10.3-1_amd64.deb ...
#15 140.7 Unpacking libpcap0.8-dev:amd64 (1.10.3-1) ...
#15 140.9 Selecting previously unselected package libpcap-dev:amd64.
#15 140.9 Preparing to unpack .../620-libpcap-dev_1.10.3-1_amd64.deb ...
#15 140.9 Unpacking libpcap-dev:amd64 (1.10.3-1) ...
#15 141.0 Selecting previously unselected package libudev-dev:amd64.
#15 141.0 Preparing to unpack .../621-libudev-dev_252.33-1~deb12u1_amd64.deb ...
#15 141.1 Unpacking libudev-dev:amd64 (252.33-1~deb12u1) ...
#15 141.2 Selecting previously unselected package libpci-dev:amd64.
#15 141.2 Preparing to unpack .../622-libpci-dev_1%3a3.9.0-4_amd64.deb ...
#15 141.2 Unpacking libpci-dev:amd64 (1:3.9.0-4) ...
#15 141.4 Selecting previously unselected package libpcsclite1:amd64.
#15 141.4 Preparing to unpack .../623-libpcsclite1_1.9.9-2_amd64.deb ...
#15 141.4 Unpacking libpcsclite1:amd64 (1.9.9-2) ...
#15 141.5 Selecting previously unselected package libpcsclite-dev:amd64.
#15 141.6 Preparing to unpack .../624-libpcsclite-dev_1.9.9-2_amd64.deb ...
#15 141.6 Unpacking libpcsclite-dev:amd64 (1.9.9-2) ...
#15 141.7 Selecting previously unselected package libpgm-5.3-0:amd64.
#15 141.7 Preparing to unpack .../625-libpgm-5.3-0_5.3.128~dfsg-2_amd64.deb ...
#15 141.8 Unpacking libpgm-5.3-0:amd64 (5.3.128~dfsg-2) ...
#15 141.9 Selecting previously unselected package libpgm-dev:amd64.
#15 141.9 Preparing to unpack .../626-libpgm-dev_5.3.128~dfsg-2_amd64.deb ...
#15 141.9 Unpacking libpgm-dev:amd64 (5.3.128~dfsg-2) ...
#15 142.1 Selecting previously unselected package libraqm0:amd64.
#15 142.1 Preparing to unpack .../627-libraqm0_0.7.0-4.1_amd64.deb ...
#15 142.1 Unpacking libraqm0:amd64 (0.7.0-4.1) ...
#15 142.3 Selecting previously unselected package librsvg2-2:amd64.
#15 142.3 Preparing to unpack .../628-librsvg2-2_2.54.7+dfsg-1~deb12u1_amd64.deb ...
#15 142.3 Unpacking librsvg2-2:amd64 (2.54.7+dfsg-1~deb12u1) ...
#15 142.5 Selecting previously unselected package librsvg2-bin.
#15 142.5 Preparing to unpack .../629-librsvg2-bin_2.54.7+dfsg-1~deb12u1_amd64.deb ...
#15 142.6 Unpacking librsvg2-bin (2.54.7+dfsg-1~deb12u1) ...
#15 142.8 Selecting previously unselected package libsctp1:amd64.
#15 142.8 Preparing to unpack .../630-libsctp1_1.0.19+dfsg-2_amd64.deb ...
#15 142.8 Unpacking libsctp1:amd64 (1.0.19+dfsg-2) ...
#15 142.9 Selecting previously unselected package libsctp-dev:amd64.
#15 142.9 Preparing to unpack .../631-libsctp-dev_1.0.19+dfsg-2_amd64.deb ...
#15 142.9 Unpacking libsctp-dev:amd64 (1.0.19+dfsg-2) ...
#15 143.0 Selecting previously unselected package libsensors-dev:amd64.
#15 143.1 Preparing to unpack .../632-libsensors-dev_1%3a3.6.0-7.1_amd64.deb ...
#15 143.1 Unpacking libsensors-dev:amd64 (1:3.6.0-7.1) ...
#15 143.2 Selecting previously unselected package libsigsegv-dev:amd64.
#15 143.2 Preparing to unpack .../633-libsigsegv-dev_2.14-1_amd64.deb ...
#15 143.2 Unpacking libsigsegv-dev:amd64 (2.14-1) ...
#15 143.4 Selecting previously unselected package libwrap0-dev:amd64.
#15 143.4 Preparing to unpack .../634-libwrap0-dev_7.6.q-32_amd64.deb ...
#15 143.4 Unpacking libwrap0-dev:amd64 (7.6.q-32) ...
#15 143.5 Selecting previously unselected package libssl-dev:amd64.
#15 143.5 Preparing to unpack .../635-libssl-dev_3.0.15-1~deb12u1_amd64.deb ...
#15 143.5 Unpacking libssl-dev:amd64 (3.0.15-1~deb12u1) ...
#15 143.8 Selecting previously unselected package libsnmp-dev.
#15 143.8 Preparing to unpack .../636-libsnmp-dev_5.9.3+dfsg-2_amd64.deb ...
#15 143.8 Unpacking libsnmp-dev (5.9.3+dfsg-2) ...
#15 144.0 Selecting previously unselected package libsodium23:amd64.
#15 144.0 Preparing to unpack .../637-libsodium23_1.0.18-1_amd64.deb ...
#15 144.0 Unpacking libsodium23:amd64 (1.0.18-1) ...
#15 144.1 Selecting previously unselected package libsodium-dev:amd64.
#15 144.1 Preparing to unpack .../638-libsodium-dev_1.0.18-1_amd64.deb ...
#15 144.2 Unpacking libsodium-dev:amd64 (1.0.18-1) ...
#15 144.3 Selecting previously unselected package libsofia-sip-ua0.
#15 144.3 Preparing to unpack .../639-libsofia-sip-ua0_1.12.11+20110422.1+1e14eea~dfsg-6_amd64.deb ...
#15 144.3 Unpacking libsofia-sip-ua0 (1.12.11+20110422.1+1e14eea~dfsg-6) ...
#15 144.5 Selecting previously unselected package libsofia-sip-ua-dev.
#15 144.5 Preparing to unpack .../640-libsofia-sip-ua-dev_1.12.11+20110422.1+1e14eea~dfsg-6_amd64.deb ...
#15 144.5 Unpacking libsofia-sip-ua-dev (1.12.11+20110422.1+1e14eea~dfsg-6) ...
#15 144.7 Selecting previously unselected package libsofia-sip-ua-glib3.
#15 144.7 Preparing to unpack .../641-libsofia-sip-ua-glib3_1.12.11+20110422.1+1e14eea~dfsg-6_amd64.deb ...
#15 144.7 Unpacking libsofia-sip-ua-glib3 (1.12.11+20110422.1+1e14eea~dfsg-6) ...
#15 144.8 Selecting previously unselected package libsofia-sip-ua-glib-dev.
#15 144.9 Preparing to unpack .../642-libsofia-sip-ua-glib-dev_1.12.11+20110422.1+1e14eea~dfsg-6_amd64.deb ...
#15 144.9 Unpacking libsofia-sip-ua-glib-dev (1.12.11+20110422.1+1e14eea~dfsg-6) ...
#15 145.0 Selecting previously unselected package libsource-highlight-common.
#15 145.0 Preparing to unpack .../643-libsource-highlight-common_3.1.9-4.2_all.deb ...
#15 145.0 Unpacking libsource-highlight-common (3.1.9-4.2) ...
#15 145.2 Selecting previously unselected package libsource-highlight4v5:amd64.
#15 145.2 Preparing to unpack .../644-libsource-highlight4v5_3.1.9-4.2+b3_amd64.deb ...
#15 145.2 Unpacking libsource-highlight4v5:amd64 (3.1.9-4.2+b3) ...
#15 145.3 Selecting previously unselected package libsqlite3-dev:amd64.
#15 145.3 Preparing to unpack .../645-libsqlite3-dev_3.40.1-2+deb12u1_amd64.deb ...
#15 145.4 Unpacking libsqlite3-dev:amd64 (3.40.1-2+deb12u1) ...
#15 145.5 Selecting previously unselected package libtalloc2:amd64.
#15 145.5 Preparing to unpack .../646-libtalloc2_2.4.0-f2_amd64.deb ...
#15 145.5 Unpacking libtalloc2:amd64 (2.4.0-f2) ...
#15 145.6 Selecting previously unselected package libtalloc-dev:amd64.
#15 145.7 Preparing to unpack .../647-libtalloc-dev_2.4.0-f2_amd64.deb ...
#15 145.7 Unpacking libtalloc-dev:amd64 (2.4.0-f2) ...
#15 145.8 Selecting previously unselected package libtext-unidecode-perl.
#15 145.8 Preparing to unpack .../648-libtext-unidecode-perl_1.30-3_all.deb ...
#15 145.8 Unpacking libtext-unidecode-perl (1.30-3) ...
#15 146.0 Selecting previously unselected package liburing2:amd64.
#15 146.0 Preparing to unpack .../649-liburing2_2.3-3_amd64.deb ...
#15 146.0 Unpacking liburing2:amd64 (2.3-3) ...
#15 146.1 Selecting previously unselected package liburing-dev:amd64.
#15 146.1 Preparing to unpack .../650-liburing-dev_2.3-3_amd64.deb ...
#15 146.2 Unpacking liburing-dev:amd64 (2.3-3) ...
#15 146.3 Selecting previously unselected package libusb-0.1-4:amd64.
#15 146.3 Preparing to unpack .../651-libusb-0.1-4_2%3a0.1.12-32_amd64.deb ...
#15 146.3 Unpacking libusb-0.1-4:amd64 (2:0.1.12-32) ...
#15 146.5 Selecting previously unselected package libusb-1.0-0-dev:amd64.
#15 146.5 Preparing to unpack .../652-libusb-1.0-0-dev_2%3a1.0.26-1_amd64.deb ...
#15 146.5 Unpacking libusb-1.0-0-dev:amd64 (2:1.0.26-1) ...
#15 146.6 Selecting previously unselected package libusb-dev.
#15 146.7 Preparing to unpack .../653-libusb-dev_2%3a0.1.12-32_amd64.deb ...
#15 146.7 Unpacking libusb-dev (2:0.1.12-32) ...
#15 146.8 Selecting previously unselected package libwebpdemux2:amd64.
#15 146.8 Preparing to unpack .../654-libwebpdemux2_1.2.4-0.2+deb12u1_amd64.deb ...
#15 146.8 Unpacking libwebpdemux2:amd64 (1.2.4-0.2+deb12u1) ...
#15 147.0 Selecting previously unselected package libwebpmux3:amd64.
#15 147.0 Preparing to unpack .../655-libwebpmux3_1.2.4-0.2+deb12u1_amd64.deb ...
#15 147.0 Unpacking libwebpmux3:amd64 (1.2.4-0.2+deb12u1) ...
#15 147.1 Selecting previously unselected package libxml-namespacesupport-perl.
#15 147.1 Preparing to unpack .../656-libxml-namespacesupport-perl_1.12-2_all.deb ...
#15 147.2 Unpacking libxml-namespacesupport-perl (1.12-2) ...
#15 147.3 Selecting previously unselected package libxml-sax-base-perl.
#15 147.3 Preparing to unpack .../657-libxml-sax-base-perl_1.09-3_all.deb ...
#15 147.3 Unpacking libxml-sax-base-perl (1.09-3) ...
#15 147.5 Selecting previously unselected package libxml-sax-perl.
#15 147.5 Preparing to unpack .../658-libxml-sax-perl_1.02+dfsg-3_all.deb ...
#15 147.5 Unpacking libxml-sax-perl (1.02+dfsg-3) ...
#15 147.6 Selecting previously unselected package libxml-libxml-perl.
#15 147.7 Preparing to unpack .../659-libxml-libxml-perl_2.0207+dfsg+really+2.0134-1+b1_amd64.deb ...
#15 147.7 Unpacking libxml-libxml-perl (2.0207+dfsg+really+2.0134-1+b1) ...
#15 147.8 Selecting previously unselected package libyaml-0-2:amd64.
#15 147.8 Preparing to unpack .../660-libyaml-0-2_0.2.5-1_amd64.deb ...
#15 147.9 Unpacking libyaml-0-2:amd64 (0.2.5-1) ...
#15 148.0 Selecting previously unselected package libzmq5:amd64.
#15 148.0 Preparing to unpack .../661-libzmq5_4.3.4-6_amd64.deb ...
#15 148.0 Unpacking libzmq5:amd64 (4.3.4-6) ...
#15 148.2 Selecting previously unselected package libzmq3-dev:amd64.
#15 148.2 Preparing to unpack .../662-libzmq3-dev_4.3.4-6_amd64.deb ...
#15 148.2 Unpacking libzmq3-dev:amd64 (4.3.4-6) ...
#15 148.4 Selecting previously unselected package lua-socket:amd64.
#15 148.4 Preparing to unpack .../663-lua-socket_3.1.0-1+b1_amd64.deb ...
#15 148.4 Unpacking lua-socket:amd64 (3.1.0-1+b1) ...
#15 148.5 Selecting previously unselected package mscgen.
#15 148.5 Preparing to unpack .../664-mscgen_0.20-14_amd64.deb ...
#15 148.5 Unpacking mscgen (0.20-14) ...
#15 148.6 Selecting previously unselected package patchelf.
#15 148.6 Preparing to unpack .../665-patchelf_0.14.3-1+b1_amd64.deb ...
#15 148.6 Unpacking patchelf (0.14.3-1+b1) ...
#15 148.8 Selecting previously unselected package picolibc-arm-none-eabi.
#15 148.8 Preparing to unpack .../666-picolibc-arm-none-eabi_1.8-1_all.deb ...
#15 148.8 Unpacking picolibc-arm-none-eabi (1.8-1) ...
#15 149.7 Selecting previously unselected package python3-setuptools.
#15 149.7 Preparing to unpack .../667-python3-setuptools_66.1.1-1+deb12u1_all.deb ...
#15 149.7 Unpacking python3-setuptools (66.1.1-1+deb12u1) ...
#15 149.9 Selecting previously unselected package python3-six.
#15 149.9 Preparing to unpack .../668-python3-six_1.16.0-4_all.deb ...
#15 149.9 Unpacking python3-six (1.16.0-4) ...
#15 150.1 Selecting previously unselected package python3-typing-extensions.
#15 150.1 Preparing to unpack .../669-python3-typing-extensions_4.4.0-1_all.deb ...
#15 150.1 Unpacking python3-typing-extensions (4.4.0-1) ...
#15 150.3 Selecting previously unselected package python3-lazy-object-proxy.
#15 150.3 Preparing to unpack .../670-python3-lazy-object-proxy_1.9.0-1+b1_amd64.deb ...
#15 150.3 Unpacking python3-lazy-object-proxy (1.9.0-1+b1) ...
#15 150.4 Selecting previously unselected package python3-wrapt.
#15 150.5 Preparing to unpack .../671-python3-wrapt_1.14.1-2+b2_amd64.deb ...
#15 150.5 Unpacking python3-wrapt (1.14.1-2+b2) ...
#15 150.6 Selecting previously unselected package python3-astroid.
#15 150.6 Preparing to unpack .../672-python3-astroid_2.14.2-1_all.deb ...
#15 150.7 Unpacking python3-astroid (2.14.2-1) ...
#15 150.8 Selecting previously unselected package python3-toml.
#15 150.8 Preparing to unpack .../673-python3-toml_0.10.2-1_all.deb ...
#15 150.8 Unpacking python3-toml (0.10.2-1) ...
#15 151.0 Selecting previously unselected package python3-isort.
#15 151.0 Preparing to unpack .../674-python3-isort_5.6.4-1_all.deb ...
#15 151.0 Unpacking python3-isort (5.6.4-1) ...
#15 151.1 Selecting previously unselected package python3-more-itertools.
#15 151.2 Preparing to unpack .../675-python3-more-itertools_8.10.0-2_all.deb ...
#15 151.2 Unpacking python3-more-itertools (8.10.0-2) ...
#15 151.3 Selecting previously unselected package python3-zipp.
#15 151.3 Preparing to unpack .../676-python3-zipp_1.0.0-6_all.deb ...
#15 151.3 Unpacking python3-zipp (1.0.0-6) ...
#15 151.5 Selecting previously unselected package python3-importlib-metadata.
#15 151.5 Preparing to unpack .../677-python3-importlib-metadata_4.12.0-1_all.deb ...
#15 151.5 Unpacking python3-importlib-metadata (4.12.0-1) ...
#15 151.6 Selecting previously unselected package python3-mypy-extensions.
#15 151.7 Preparing to unpack .../678-python3-mypy-extensions_0.4.3-4_all.deb ...
#15 151.7 Unpacking python3-mypy-extensions (0.4.3-4) ...
#15 151.8 Selecting previously unselected package python3-logilab-common.
#15 151.8 Preparing to unpack .../679-python3-logilab-common_1.9.8-1_all.deb ...
#15 151.8 Unpacking python3-logilab-common (1.9.8-1) ...
#15 152.0 Selecting previously unselected package python3-dill.
#15 152.0 Preparing to unpack .../680-python3-dill_0.3.6-1_all.deb ...
#15 152.0 Unpacking python3-dill (0.3.6-1) ...
#15 152.1 Selecting previously unselected package python3-mccabe.
#15 152.2 Preparing to unpack .../681-python3-mccabe_0.7.0-1_all.deb ...
#15 152.2 Unpacking python3-mccabe (0.7.0-1) ...
#15 152.3 Selecting previously unselected package python3-platformdirs.
#15 152.3 Preparing to unpack .../682-python3-platformdirs_2.6.0-1_all.deb ...
#15 152.3 Unpacking python3-platformdirs (2.6.0-1) ...
#15 152.5 Selecting previously unselected package python3-tomlkit.
#15 152.5 Preparing to unpack .../683-python3-tomlkit_0.11.7-1_all.deb ...
#15 152.5 Unpacking python3-tomlkit (0.11.7-1) ...
#15 152.7 Selecting previously unselected package pylint.
#15 152.7 Preparing to unpack .../684-pylint_2.16.2-2_all.deb ...
#15 152.7 Unpacking pylint (2.16.2-2) ...
#15 152.8 Selecting previously unselected package python3-funcparserlib.
#15 152.9 Preparing to unpack .../685-python3-funcparserlib_1.0.0-0.2_all.deb ...
#15 152.9 Unpacking python3-funcparserlib (1.0.0-0.2) ...
#15 153.0 Selecting previously unselected package python3-pil:amd64.
#15 153.0 Preparing to unpack .../686-python3-pil_9.4.0-1.1+deb12u1_amd64.deb ...
#15 153.1 Unpacking python3-pil:amd64 (9.4.0-1.1+deb12u1) ...
#15 153.2 Selecting previously unselected package python3-webcolors.
#15 153.2 Preparing to unpack .../687-python3-webcolors_1.11.1-1_all.deb ...
#15 153.2 Unpacking python3-webcolors (1.11.1-1) ...
#15 153.4 Selecting previously unselected package python3-roman.
#15 153.4 Preparing to unpack .../688-python3-roman_3.3-3_all.deb ...
#15 153.4 Unpacking python3-roman (3.3-3) ...
#15 153.5 Selecting previously unselected package python3-docutils.
#15 153.5 Preparing to unpack .../689-python3-docutils_0.19+dfsg-6_all.deb ...
#15 153.6 Unpacking python3-docutils (0.19+dfsg-6) ...
#15 153.7 Selecting previously unselected package python3-reportlab-accel:amd64.
#15 153.7 Preparing to unpack .../690-python3-reportlab-accel_3.6.12-1+deb12u1_amd64.deb ...
#15 153.7 Unpacking python3-reportlab-accel:amd64 (3.6.12-1+deb12u1) ...
#15 153.9 Selecting previously unselected package python3-reportlab.
#15 153.9 Preparing to unpack .../691-python3-reportlab_3.6.12-1+deb12u1_all.deb ...
#15 153.9 Unpacking python3-reportlab (3.6.12-1+deb12u1) ...
#15 154.1 Selecting previously unselected package python3-blockdiag.
#15 154.1 Preparing to unpack .../692-python3-blockdiag_2.0.1+dfsg-1_all.deb ...
#15 154.1 Unpacking python3-blockdiag (2.0.1+dfsg-1) ...
#15 154.2 Selecting previously unselected package python3-distlib.
#15 154.3 Preparing to unpack .../693-python3-distlib_0.3.6-1_all.deb ...
#15 154.3 Unpacking python3-distlib (0.3.6-1) ...
#15 154.4 Selecting previously unselected package python3-filelock.
#15 154.4 Preparing to unpack .../694-python3-filelock_3.9.0-1_all.deb ...
#15 154.5 Unpacking python3-filelock (3.9.0-1) ...
#15 154.6 Selecting previously unselected package python3-gi.
#15 154.6 Preparing to unpack .../695-python3-gi_3.42.2-3+b1_amd64.deb ...
#15 154.6 Unpacking python3-gi (3.42.2-3+b1) ...
#15 154.7 Selecting previously unselected package python3-markupsafe.
#15 154.7 Preparing to unpack .../696-python3-markupsafe_2.1.2-1+b1_amd64.deb ...
#15 154.8 Unpacking python3-markupsafe (2.1.2-1+b1) ...
#15 154.9 Selecting previously unselected package python3-mako.
#15 154.9 Preparing to unpack .../697-python3-mako_1.2.4+ds-1_all.deb ...
#15 154.9 Unpacking python3-mako (1.2.4+ds-1) ...
#15 155.1 Selecting previously unselected package python3-nwdiag.
#15 155.1 Preparing to unpack .../698-python3-nwdiag_2.0.0+dfsg-1.1_all.deb ...
#15 155.1 Unpacking python3-nwdiag (2.0.0+dfsg-1.1) ...
#15 155.3 Selecting previously unselected package python3-wheel.
#15 155.3 Preparing to unpack .../699-python3-wheel_0.38.4-2_all.deb ...
#15 155.3 Unpacking python3-wheel (0.38.4-2) ...
#15 155.4 Selecting previously unselected package python3-pip.
#15 155.5 Preparing to unpack .../700-python3-pip_23.0.1+dfsg-1_all.deb ...
#15 155.5 Unpacking python3-pip (23.0.1+dfsg-1) ...
#15 155.6 Selecting previously unselected package python3-pip-whl.
#15 155.7 Preparing to unpack .../701-python3-pip-whl_23.0.1+dfsg-1_all.deb ...
#15 155.7 Unpacking python3-pip-whl (23.0.1+dfsg-1) ...
#15 155.9 Selecting previously unselected package python3-pyflakes.
#15 155.9 Preparing to unpack .../702-python3-pyflakes_2.5.0-1_all.deb ...
#15 155.9 Unpacking python3-pyflakes (2.5.0-1) ...
#15 156.0 Selecting previously unselected package python3-setuptools-whl.
#15 156.0 Preparing to unpack .../703-python3-setuptools-whl_66.1.1-1+deb12u1_all.deb ...
#15 156.1 Unpacking python3-setuptools-whl (66.1.1-1+deb12u1) ...
#15 156.2 Selecting previously unselected package python3-usb.
#15 156.2 Preparing to unpack .../704-python3-usb_1.2.1-2_all.deb ...
#15 156.2 Unpacking python3-usb (1.2.1-2) ...
#15 156.3 Selecting previously unselected package python3-wheel-whl.
#15 156.4 Preparing to unpack .../705-python3-wheel-whl_0.38.4-2_all.deb ...
#15 156.4 Unpacking python3-wheel-whl (0.38.4-2) ...
#15 156.5 Selecting previously unselected package python3-virtualenv.
#15 156.5 Preparing to unpack .../706-python3-virtualenv_20.17.1+ds-1_all.deb ...
#15 156.5 Unpacking python3-virtualenv (20.17.1+ds-1) ...
#15 156.7 Selecting previously unselected package python3-yaml.
#15 156.7 Preparing to unpack .../707-python3-yaml_6.0-3+b2_amd64.deb ...
#15 156.7 Unpacking python3-yaml (6.0-3+b2) ...
#15 156.8 Selecting previously unselected package sdcc-libraries.
#15 156.9 Preparing to unpack .../708-sdcc-libraries_4.2.0+dfsg-1_all.deb ...
#15 156.9 Unpacking sdcc-libraries (4.2.0+dfsg-1) ...
#15 157.1 Selecting previously unselected package sdcc.
#15 157.1 Preparing to unpack .../709-sdcc_4.2.0+dfsg-1_amd64.deb ...
#15 157.1 Unpacking sdcc (4.2.0+dfsg-1) ...
#15 157.3 Selecting previously unselected package source-highlight.
#15 157.4 Preparing to unpack .../710-source-highlight_3.1.9-4.2+b3_amd64.deb ...
#15 157.4 Unpacking source-highlight (3.1.9-4.2+b3) ...
#15 157.5 Selecting previously unselected package sqlite3.
#15 157.5 Preparing to unpack .../711-sqlite3_3.40.1-2+deb12u1_amd64.deb ...
#15 157.5 Unpacking sqlite3 (3.40.1-2+deb12u1) ...
#15 157.7 Selecting previously unselected package stow.
#15 157.7 Preparing to unpack .../712-stow_2.3.1-1_all.deb ...
#15 157.7 Unpacking stow (2.3.1-1) ...
#15 157.9 Selecting previously unselected package swig4.0.
#15 157.9 Preparing to unpack .../713-swig4.0_4.1.0-0.2_amd64.deb ...
#15 157.9 Unpacking swig4.0 (4.1.0-0.2) ...
#15 158.1 Selecting previously unselected package swig.
#15 158.1 Preparing to unpack .../714-swig_4.1.0-0.2_all.deb ...
#15 158.1 Unpacking swig (4.1.0-0.2) ...
#15 158.3 Selecting previously unselected package tcpdump.
#15 158.3 Preparing to unpack .../715-tcpdump_4.99.3-1_amd64.deb ...
#15 158.3 Unpacking tcpdump (4.99.3-1) ...
#15 158.5 Selecting previously unselected package telnet.
#15 158.5 Preparing to unpack .../716-telnet_0.17+2.4-2+deb12u1_all.deb ...
#15 158.5 Unpacking telnet (0.17+2.4-2+deb12u1) ...
#15 158.7 Selecting previously unselected package tex-gyre.
#15 158.7 Preparing to unpack .../717-tex-gyre_20180621-6_all.deb ...
#15 158.7 Unpacking tex-gyre (20180621-6) ...
#15 159.1 Selecting previously unselected package texinfo.
#15 159.1 Preparing to unpack .../718-texinfo_6.8-6+b1_amd64.deb ...
#15 159.1 Unpacking texinfo (6.8-6+b1) ...
#15 159.3 Selecting previously unselected package unzip.
#15 159.3 Preparing to unpack .../719-unzip_6.0-28_amd64.deb ...
#15 159.3 Unpacking unzip (6.0-28) ...
#15 159.5 Selecting previously unselected package virtualenv.
#15 159.5 Preparing to unpack .../720-virtualenv_20.17.1+ds-1_all.deb ...
#15 159.5 Unpacking virtualenv (20.17.1+ds-1) ...
#15 159.7 Setting up libip4tc2:amd64 (1.8.9-2) ...
#15 159.7 Setting up libksba8:amd64 (1.6.3-2) ...
#15 159.8 Setting up libboost-chrono1.74.0:amd64 (1.74.0+ds1-21) ...
#15 159.8 Setting up media-types (10.0.0) ...
#15 159.9 Setting up libpipeline1:amd64 (1.5.7-1) ...
#15 160.0 Setting up libboost-system1.74.0:amd64 (1.74.0+ds1-21) ...
#15 160.0 Setting up libgraphite2-3:amd64 (1.3.14-1) ...
#15 160.1 Setting up liblcms2-2:amd64 (2.14-2) ...
#15 160.1 Setting up libpixman-1-0:amd64 (0.42.2-1) ...
#15 160.2 Setting up libtext-charwidth-perl:amd64 (0.04-11) ...
#15 160.2 Setting up libxapian30:amd64 (1.4.22-1) ...
#15 160.3 Setting up wdiff (1.2.2-5) ...
#15 160.4 Setting up libaom3:amd64 (3.6.0-1+deb12u1) ...
#15 160.4 Setting up libpciaccess0:amd64 (0.17-2) ...
#15 160.5 Setting up mysql-common (5.8+1.1.0) ...
#15 160.6 update-alternatives: using /etc/mysql/my.cnf.fallback to provide /etc/mysql/my.cnf (my.cnf) in auto mode
#15 160.6 Setting up libabsl20220623:amd64 (20220623.1-1) ...
#15 160.7 Setting up libxau6:amd64 (1:1.0.9-1) ...
#15 160.7 Setting up python3-setuptools-whl (66.1.1-1+deb12u1) ...
#15 160.8 Setting up libkeyutils1:amd64 (1.6.3-2) ...
#15 160.8 Setting up libapparmor1:amd64 (3.0.8-3) ...
#15 160.9 Setting up libc-l10n (2.36-9+deb12u9) ...
#15 160.9 Setting up pci.ids (0.0~2023.04.11-1) ...
#15 161.0 Setting up binutils-arm-none-eabi (2.40-2+18+b1) ...
#15 161.0 Setting up libgnutls-openssl27:amd64 (3.7.9-2+deb12u3) ...
#15 161.1 Setting up libsodium23:amd64 (1.0.18-1) ...
#15 161.1 Setting up libicu72:amd64 (72.1-3) ...
#15 161.2 Setting up libboost-atomic1.74.0:amd64 (1.74.0+ds1-21) ...
#15 161.2 Setting up liblerc4:amd64 (4.0.0+ds-2) ...
#15 161.3 Setting up libdbi1:amd64 (0.9.0-6) ...
#15 161.4 Setting up bsdextrautils (2.38.1-5+deb12u3) ...
#15 161.4 Setting up fonts-gfs-porson (1.1-7) ...
#15 161.5 Setting up libdatrie1:amd64 (0.2.13-2+b1) ...
#15 161.5 Setting up libmagic-mgc (1:5.44-3) ...
#15 161.6 Setting up libgsm1:amd64 (1.0.22-1) ...
#15 161.6 Setting up python3-pip-whl (23.0.1+dfsg-1) ...
#15 161.7 Setting up gawk (1:5.2.1-2) ...
#15 161.8 Setting up libyaml-0-2:amd64 (0.2.5-1) ...
#15 161.8 Setting up libsigsegv-dev:amd64 (2.14-1) ...
#15 161.9 Setting up libglib2.0-0:amd64 (2.74.6-2+deb12u5) ...
#15 161.9 No schema files found: doing nothing.
#15 161.9 Setting up distro-info-data (0.58+deb12u3) ...
#15 162.0 Setting up libboost-iostreams1.74.0:amd64 (1.74.0+ds1-21) ...
#15 162.0 Setting up libsnmp-base (5.9.3+dfsg-2) ...
#15 162.1 Setting up libboost-program-options1.74.0:amd64 (1.74.0+ds1-21) ...
#15 162.2 Setting up libtirpc-common (1.3.3+ds-1) ...
#15 162.2 Setting up libpgm-5.3-0:amd64 (5.3.128~dfsg-2) ...
#15 162.3 Setting up libargon2-1:amd64 (0~20171227-0.3+deb12u1) ...
#15 162.3 Setting up libijs-0.35:amd64 (0.35-15) ...
#15 162.4 Setting up unzip (6.0-28) ...
#15 162.4 Setting up libcbor0.8:amd64 (0.8.0-2+b1) ...
#15 162.5 Setting up libtexluajit2:amd64 (2022.20220321.62855-5.1+deb12u2) ...
#15 162.5 Setting up libgs-common (10.0.0~dfsg-11+deb12u6) ...
#15 162.6 Setting up libbrotli1:amd64 (1.0.9-2+b6) ...
#15 162.6 Setting up libfontbox-java (1:1.8.16-2) ...
#15 162.7 Setting up libsqlite3-0:amd64 (3.40.1-2+deb12u1) ...
#15 162.7 Setting up liblab-gamut1:amd64 (2.42.2-7+deb12u1) ...
#15 162.8 Setting up libgdk-pixbuf2.0-common (2.42.10+dfsg-1+deb12u1) ...
#15 162.8 Setting up libnorm1:amd64 (1.5.9+dfsg-2) ...
#15 162.9 Setting up binutils-common:amd64 (2.40-2) ...
#15 163.0 Setting up x11-common (1:7.7+23) ...
#15 163.3 debconf: unable to initialize frontend: Dialog
#15 163.3 debconf: (TERM is not set, so the dialog frontend is not usable.)
#15 163.3 debconf: falling back to frontend: Readline
#15 163.3 debconf: unable to initialize frontend: Readline
#15 163.3 debconf: (This frontend requires a controlling tty.)
#15 163.3 debconf: falling back to frontend: Teletype
#15 163.3 invoke-rc.d: could not determine current runlevel
#15 163.3 invoke-rc.d: policy-rc.d denied execution of restart.
#15 163.3 Setting up libsensors-config (1:3.6.0-7.1) ...
#15 163.4 Setting up libboost-stacktrace1.74.0:amd64 (1.74.0+ds1-21) ...
#15 163.5 Setting up libnghttp2-14:amd64 (1.52.0-1+deb12u2) ...
#15 163.5 Setting up libmagic1:amd64 (1:5.44-3) ...
#15 163.6 Setting up libdeflate0:amd64 (1.14-1) ...
#15 163.7 Setting up perl-openssl-defaults:amd64 (7+b1) ...
#15 163.7 Setting up linux-libc-dev:amd64 (6.1.124-1) ...
#15 164.8 Setting up bc (1.07.1-3+b1) ...
#15 165.1 Setting up libctf-nobfd0:amd64 (2.40-2) ...
#15 165.2 Setting up gettext-base (0.21-12) ...
#15 165.2 Setting up m4 (1.4.19-3) ...
#15 165.3 Setting up libboost-nowide1.74.0 (1.74.0+ds1-21) ...
#15 165.3 Setting up lua-socket:amd64 (3.1.0-1+b1) ...
#15 165.4 Setting up libboost-filesystem1.74.0:amd64 (1.74.0+ds1-21) ...
#15 165.4 Setting up libnpth0:amd64 (1.6-3) ...
#15 165.5 Setting up autoconf-archive (20220903-3) ...
#15 165.6 Setting up libzzip-0-13:amd64 (0.13.72+dfsg.1-1.1) ...
#15 165.6 Setting up libc-ares2:amd64 (1.18.1-3) ...
#15 165.7 Setting up file (1:5.44-3) ...
#15 165.7 Setting up libsvtav1enc1:amd64 (1.4.1+dfsg-1) ...
#15 165.8 Setting up libassuan0:amd64 (2.5.5-5) ...
#15 165.8 Setting up libdecaf0:amd64 (1.0.2-2) ...
#15 165.9 Setting up libgomp1:amd64 (12.2.0-14) ...
#15 165.9 Setting up bzip2 (1.0.8-5+b1) ...
#15 166.0 Setting up libffi-dev:amd64 (3.4.4-1) ...
#15 166.0 Setting up locales (2.36-9+deb12u9) ...
#15 166.1 debconf: unable to initialize frontend: Dialog
#15 166.1 debconf: (TERM is not set, so the dialog frontend is not usable.)
#15 166.1 debconf: falling back to frontend: Readline
#15 166.1 debconf: unable to initialize frontend: Readline
#15 166.1 debconf: (This frontend requires a controlling tty.)
#15 166.1 debconf: falling back to frontend: Teletype
#15 166.8 Generating locales (this might take a while)...
#15 166.8 Generation complete.
#15 166.9 Setting up libopts25:amd64 (1:5.18.16-5) ...
#15 166.9 Setting up libtext-wrapi18n-perl (0.06-10) ...
#15 167.0 Setting up libjbig0:amd64 (2.1-6.1) ...
#15 167.0 Setting up librav1e0:amd64 (0.5.1-6) ...
#15 167.1 Setting up libpcre2-16-0:amd64 (10.42-1) ...
#15 167.1 Setting up libsource-highlight-common (3.1.9-4.2) ...
#15 167.2 Setting up libfakeroot:amd64 (1.31-1.2) ...
#15 167.2 Setting up libjansson4:amd64 (2.14-2) ...
#15 167.3 Setting up libusb-0.1-4:amd64 (2:0.1.12-32) ...
#15 167.3 Setting up poppler-data (0.4.12-1) ...
#15 167.5 Setting up libkrb5support0:amd64 (1.20.1-2+deb12u2) ...
#15 167.5 Setting up libsasl2-modules-db:amd64 (2.1.28+dfsg-10) ...
#15 167.6 Setting up libosp5 (1.5.2-13+b2) ...
#15 167.7 Setting up libcap2-bin (1:2.66-4) ...
#15 167.7 Setting up fakeroot (1.31-1.2) ...
#15 167.7 update-alternatives: using /usr/bin/fakeroot-sysv to provide /usr/bin/fakeroot (fakeroot) in auto mode
#15 167.7 update-alternatives: warning: skip creation of /usr/share/man/man1/fakeroot.1.gz because associated file /usr/share/man/man1/fakeroot-sysv.1.gz (of link group fakeroot) doesn't exist
#15 167.7 update-alternatives: warning: skip creation of /usr/share/man/man1/faked.1.gz because associated file /usr/share/man/man1/faked-sysv.1.gz (of link group fakeroot) doesn't exist
#15 167.7 update-alternatives: warning: skip creation of /usr/share/man/es/man1/fakeroot.1.gz because associated file /usr/share/man/es/man1/fakeroot-sysv.1.gz (of link group fakeroot) doesn't exist
#15 167.7 update-alternatives: warning: skip creation of /usr/share/man/es/man1/faked.1.gz because associated file /usr/share/man/es/man1/faked-sysv.1.gz (of link group fakeroot) doesn't exist
#15 167.7 update-alternatives: warning: skip creation of /usr/share/man/fr/man1/fakeroot.1.gz because associated file /usr/share/man/fr/man1/fakeroot-sysv.1.gz (of link group fakeroot) doesn't exist
#15 167.7 update-alternatives: warning: skip creation of /usr/share/man/fr/man1/faked.1.gz because associated file /usr/share/man/fr/man1/faked-sysv.1.gz (of link group fakeroot) doesn't exist
#15 167.7 update-alternatives: warning: skip creation of /usr/share/man/sv/man1/fakeroot.1.gz because associated file /usr/share/man/sv/man1/fakeroot-sysv.1.gz (of link group fakeroot) doesn't exist
#15 167.7 update-alternatives: warning: skip creation of /usr/share/man/sv/man1/faked.1.gz because associated file /usr/share/man/sv/man1/faked-sysv.1.gz (of link group fakeroot) doesn't exist
#15 167.8 Setting up libtalloc2:amd64 (2.4.0-f2) ...
#15 167.8 Setting up libgts-0.7-5:amd64 (0.7.6+darcs121130-5+b1) ...
#15 167.9 Setting up mariadb-common (1:10.11.6-0+deb12u1) ...
#15 167.9 update-alternatives: using /etc/mysql/mariadb.cnf to provide /etc/mysql/my.cnf (my.cnf) in auto mode
#15 168.0 Setting up libasound2-data (1.2.8-1) ...
#15 168.0 Setting up libpcre3:amd64 (2:8.39-15) ...
#15 168.1 Setting up libfontenc1:amd64 (1:1.1.4-1) ...
#15 168.1 Setting up perl-modules-5.36 (5.36.0-7+deb12u1) ...
#15 168.2 Setting up autotools-dev (20220109.1) ...
#15 168.2 Setting up libz3-4:amd64 (4.8.12-3.1) ...
#15 168.3 Setting up libpcre2-32-0:amd64 (10.42-1) ...
#15 168.3 Setting up libglib2.0-data (2.74.6-2+deb12u5) ...
#15 168.4 Setting up libpkgconf3:amd64 (1.8.1-1) ...
#15 168.4 Setting up libgmpxx4ldbl:amd64 (2:6.2.1+dfsg1-1.1) ...
#15 168.5 Setting up libuv1:amd64 (1.44.2-1+deb12u1) ...
#15 168.6 Setting up rpcsvc-proto (1.4.3-1) ...
#15 168.6 Setting up libmunge2 (0.5.15-2) ...
#15 168.7 Setting up libboost-test1.74.0:amd64 (1.74.0+ds1-21) ...
#15 168.7 Setting up libjpeg62-turbo:amd64 (1:2.1.5-2) ...
#15 168.8 Setting up libmbedcrypto7:amd64 (2.28.3-1) ...
#15 168.8 Setting up libx11-data (2:1.8.4-2+deb12u2) ...
#15 168.9 Setting up make (4.3-4.1) ...
#15 168.9 Setting up gnupg-l10n (2.2.40-1.1) ...
#15 169.0 Setting up libjbig2dec0:amd64 (0.19-3) ...
#15 169.0 Setting up librtmp1:amd64 (2.4+20151223.gitfa8646d.1-2+b2) ...
#15 169.1 Setting up libteckit0:amd64 (2.5.11+ds1-1+b1) ...
#15 169.1 Setting up libpgm-dev:amd64 (5.3.128~dfsg-2) ...
#15 169.2 Setting up libgnutlsxx30:amd64 (3.7.9-2+deb12u3) ...
#15 169.2 Setting up libpathplan4:amd64 (2.42.2-7+deb12u1) ...
#15 169.3 Setting up libapache-pom-java (29-2) ...
#15 169.3 Setting up libavahi-common-data:amd64 (0.8-10+deb12u1) ...
#15 169.4 Setting up libann0 (1.1.2+doc-9+b1) ...
#15 169.4 Setting up libncurses6:amd64 (6.4-4) ...
#15 169.5 Setting up libdbus-1-3:amd64 (1.14.10-1~deb12u1) ...
#15 169.6 Setting up xz-utils (5.4.1-0.2) ...
#15 169.6 update-alternatives: using /usr/bin/xz to provide /usr/bin/lzma (lzma) in auto mode
#15 169.6 update-alternatives: warning: skip creation of /usr/share/man/man1/lzma.1.gz because associated file /usr/share/man/man1/xz.1.gz (of link group lzma) doesn't exist
#15 169.6 update-alternatives: warning: skip creation of /usr/share/man/man1/unlzma.1.gz because associated file /usr/share/man/man1/unxz.1.gz (of link group lzma) doesn't exist
#15 169.6 update-alternatives: warning: skip creation of /usr/share/man/man1/lzcat.1.gz because associated file /usr/share/man/man1/xzcat.1.gz (of link group lzma) doesn't exist
#15 169.6 update-alternatives: warning: skip creation of /usr/share/man/man1/lzmore.1.gz because associated file /usr/share/man/man1/xzmore.1.gz (of link group lzma) doesn't exist
#15 169.6 update-alternatives: warning: skip creation of /usr/share/man/man1/lzless.1.gz because associated file /usr/share/man/man1/xzless.1.gz (of link group lzma) doesn't exist
#15 169.6 update-alternatives: warning: skip creation of /usr/share/man/man1/lzdiff.1.gz because associated file /usr/share/man/man1/xzdiff.1.gz (of link group lzma) doesn't exist
#15 169.6 update-alternatives: warning: skip creation of /usr/share/man/man1/lzcmp.1.gz because associated file /usr/share/man/man1/xzcmp.1.gz (of link group lzma) doesn't exist
#15 169.6 update-alternatives: warning: skip creation of /usr/share/man/man1/lzgrep.1.gz because associated file /usr/share/man/man1/xzgrep.1.gz (of link group lzma) doesn't exist
#15 169.6 update-alternatives: warning: skip creation of /usr/share/man/man1/lzegrep.1.gz because associated file /usr/share/man/man1/xzegrep.1.gz (of link group lzma) doesn't exist
#15 169.6 update-alternatives: warning: skip creation of /usr/share/man/man1/lzfgrep.1.gz because associated file /usr/share/man/man1/xzfgrep.1.gz (of link group lzma) doesn't exist
#15 169.6 Setting up xfonts-encodings (1:1.0.4-2.2) ...
#15 169.7 Setting up libboost-nowide1.74-dev (1.74.0+ds1-21) ...
#15 169.8 Setting up libfribidi0:amd64 (1.0.8-2.1) ...
#15 169.8 Setting up libboost-regex1.74.0:amd64 (1.74.0+ds1-21) ...
#15 169.9 Setting up t1utils (1.41-4) ...
#15 169.9 Setting up libnewlib-dev (3.3.0-1.3+deb12u1) ...
#15 170.0 Setting up libquadmath0:amd64 (12.2.0-14) ...
#15 170.0 Setting up libtexlua53-5:amd64 (2022.20220321.62855-5.1+deb12u2) ...
#15 170.1 Setting up libimagequant0:amd64 (2.17.0-1) ...
#15 170.1 Setting up libproc2-0:amd64 (2:4.0.2-3) ...
#15 170.2 Setting up libgsm1-dev:amd64 (1.0.22-1) ...
#15 170.3 Setting up libssl-dev:amd64 (3.0.15-1~deb12u1) ...
#15 170.3 Setting up libpng16-16:amd64 (1.6.39-2) ...
#15 170.4 Setting up libhwloc15:amd64 (2.9.0-1) ...
#15 170.4 Setting up libmpc3:amd64 (1.3.1-1) ...
#15 170.5 Setting up libmnl0:amd64 (1.0.4-3) ...
#15 170.5 Setting up libc-ares-dev:amd64 (1.18.1-3) ...
#15 170.6 Setting up libevent-core-2.1-7:amd64 (2.1.12-stable-8) ...
#15 170.6 Setting up liboping0:amd64 (1.10.0-5+b1) ...
#15 170.7 Setting up libatomic1:amd64 (12.2.0-14) ...
#15 170.8 Setting up libboost-context1.74.0:amd64 (1.74.0+ds1-21) ...
#15 170.8 Setting up libtinyxml2-9:amd64 (9.0.0+dfsg-3.1) ...
#15 170.9 Setting up libidn12:amd64 (1.41-1) ...
#15 171.0 Setting up libevent-2.1-7:amd64 (2.1.12-stable-8) ...
#15 171.0 Setting up patch (2.7.6-7) ...
#15 171.1 Setting up libboost-graph1.74.0:amd64 (1.74.0+ds1-21) ...
#15 171.1 Setting up libboost-random1.74.0:amd64 (1.74.0+ds1-21) ...
#15 171.2 Setting up autopoint (0.21-12) ...
#15 171.2 Setting up libjsoncpp25:amd64 (1.9.5-4) ...
#15 171.3 Setting up icu-devtools (72.1-3) ...
#15 171.3 Setting up sudo (1.9.13p3-1+deb12u1) ...
#15 171.5 invoke-rc.d: could not determine current runlevel
#15 171.5 invoke-rc.d: policy-rc.d denied execution of start.
#15 171.5 Setting up ocaml-base (4.13.1-4) ...
#15 171.6 Setting up libmariadb3:amd64 (1:10.11.6-0+deb12u1) ...
#15 171.7 Setting up fonts-dejavu-core (2.37-6) ...
#15 171.9 Setting up libudev-dev:amd64 (252.33-1~deb12u1) ...
#15 172.0 Setting up libgav1-1:amd64 (0.18.0-1+b1) ...
#15 172.1 Setting up libsepol-dev:amd64 (3.4-2.1) ...
#15 172.1 Setting up libpcsclite1:amd64 (1.9.9-2) ...
#15 172.2 Setting up libboost1.74-tools-dev (1.74.0+ds1-21) ...
#15 172.2 Setting up pkgconf-bin (1.8.1-1) ...
#15 172.2 Setting up libsensors5:amd64 (1:3.6.0-7.1) ...
#15 172.3 Setting up libsodium-dev:amd64 (1.0.18-1) ...
#15 172.3 Setting up sdcc-libraries (4.2.0+dfsg-1) ...
#15 172.4 Setting up libpcsclite-dev:amd64 (1.9.9-2) ...
#15 172.4 Setting up libncursesw6:amd64 (6.4-4) ...
#15 172.5 Setting up libk5crypto3:amd64 (1.20.1-2+deb12u2) ...
#15 172.5 Setting up libxtables12:amd64 (1.8.9-2) ...
#15 172.6 Setting up lynx-common (2.9.0dev.12-1) ...
#15 172.7 Setting up libgc1:amd64 (1:8.2.2-3) ...
#15 172.7 Setting up libdav1d6:amd64 (1.0.0-2+deb12u1) ...
#15 172.8 Setting up libltdl7:amd64 (2.4.7-7~deb12u1) ...
#15 172.8 Setting up libfftw3-double3:amd64 (3.3.10-1) ...
#15 172.9 Setting up libidn2-dev:amd64 (2.3.3-1+b1) ...
#15 173.0 Setting up libnewlib-arm-none-eabi (3.3.0-1.3+deb12u1) ...
#15 173.0 Setting up libkpathsea6:amd64 (2022.20220321.62855-5.1+deb12u2) ...
#15 173.1 Setting up libsasl2-2:amd64 (2.1.28+dfsg-10) ...
#15 173.1 Setting up libgfortran5:amd64 (12.2.0-14) ...
#15 173.2 Setting up libwebp7:amd64 (1.2.4-0.2+deb12u1) ...
#15 173.2 Setting up libfdisk1:amd64 (2.38.1-5+deb12u3) ...
#15 173.3 Setting up libboost-math1.74.0:amd64 (1.74.0+ds1-21) ...
#15 173.3 Setting up libubsan1:amd64 (12.2.0-14) ...
#15 173.4 Setting up libboost-serialization1.74.0:amd64 (1.74.0+ds1-21) ...
#15 173.4 Setting up libstdcompat-ocaml (19-1) ...
#15 173.5 Setting up libpci3:amd64 (1:3.9.0-4) ...
#15 173.5 Setting up libnuma1:amd64 (2.0.16-1) ...
#15 173.6 Setting up libpcre2-posix3:amd64 (10.42-1) ...
#15 173.6 Setting up libsctp1:amd64 (1.0.19+dfsg-2) ...
#15 173.7 Setting up python-apt-common (2.6.0) ...
#15 173.8 Setting up libboost-container1.74.0:amd64 (1.74.0+ds1-21) ...
#15 173.8 Setting up libostyle1c2 (1.4devel1-22) ...
#15 173.9 Setting up fonts-gfs-baskerville (1.1-6) ...
#15 173.9 Setting up sensible-utils (0.0.17+nmu1) ...
#15 174.0 Setting up ocl-icd-libopencl1:amd64 (2.3.1-1) ...
#15 174.1 Setting up librhash0:amd64 (1.4.3-3) ...
#15 174.1 Setting up libcrypt-dev:amd64 (1:4.4.33-2) ...
#15 174.2 Setting up libtiff6:amd64 (4.5.0-6+deb12u2) ...
#15 174.2 Setting up dbus-session-bus-common (1.14.10-1~deb12u1) ...
#15 174.3 Setting up libasan8:amd64 (12.2.0-14) ...
#15 174.3 Setting up libuchardet0:amd64 (0.0.7-1) ...
#15 174.4 Setting up liblua5.3-0:amd64 (5.3.6-2) ...
#15 174.5 Setting up procps (2:4.0.2-3) ...
#15 174.6 Setting up libasound2:amd64 (1.2.8-1+b1) ...
#15 174.7 Setting up libmd-dev:amd64 (1.0.4-2) ...
#15 174.7 Setting up libnl-3-200:amd64 (3.7.0-0.2+b1) ...
#15 174.8 Setting up bison (2:3.8.2+dfsg-1+b1) ...
#15 174.8 update-alternatives: using /usr/bin/bison.yacc to provide /usr/bin/yacc (yacc) in auto mode
#15 174.8 update-alternatives: warning: skip creation of /usr/share/man/man1/yacc.1.gz because associated file /usr/share/man/man1/bison.yacc.1.gz (of link group yacc) doesn't exist
#15 174.9 Setting up gpgconf (2.2.40-1.1) ...
#15 174.9 Setting up libpsm2-2 (11.2.185-2) ...
#15 175.0 Setting up openmpi-common (4.1.4-3) ...
#15 175.0 Setting up fonts-lmodern (2.005-1) ...
#15 175.1 Setting up libopenjp2-7:amd64 (2.5.0-2) ...
#15 175.2 Setting up git-man (1:2.39.5-0+deb12u1) ...
#15 175.2 Setting up libthai-data (0.1.29-1) ...
#15 175.3 Setting up libgirepository-1.0-1:amd64 (1.74.0-3) ...
#15 175.3 Setting up libssh2-1:amd64 (1.10.0-3+b1) ...
#15 175.4 Setting up netbase (6.4) ...
#15 175.5 Setting up sgml-base (1.31) ...
#15 175.6 Setting up libsofia-sip-ua0 (1.12.11+20110422.1+1e14eea~dfsg-6) ...
#15 175.7 Setting up cmake-data (3.25.1-1) ...
#15 175.7 Setting up libcdt5:amd64 (2.42.2-7+deb12u1) ...
#15 175.8 Setting up libkrb5-3:amd64 (1.20.1-2+deb12u2) ...
#15 175.9 Setting up libcgraph6:amd64 (2.42.2-7+deb12u1) ...
#15 175.9 Setting up libusb-1.0-0:amd64 (2:1.0.26-1) ...
#15 176.0 Setting up libsensors-dev:amd64 (1:3.6.0-7.1) ...
#15 176.0 Setting up libpsm-infinipath1 (3.3+20.604758e7-6.2) ...
#15 176.1 update-alternatives: using /usr/lib/libpsm1/libpsm_infinipath.so.1.16 to provide /usr/lib/x86_64-linux-gnu/libpsm_infinipath.so.1 (libpsm_infinipath.so.1) in auto mode
#15 176.1 Setting up libtsan2:amd64 (12.2.0-14) ...
#15 176.1 Setting up libjs-jquery (3.6.1+dfsg+~3.5.14-1) ...
#15 176.2 Setting up libboost-date-time1.74.0:amd64 (1.74.0+ds1-21) ...
#15 176.3 Setting up libbinutils:amd64 (2.40-2) ...
#15 176.3 Setting up liburing2:amd64 (2.3-3) ...
#15 176.4 Setting up patchelf (0.14.3-1+b1) ...
#15 176.4 Setting up dbus-system-bus-common (1.14.10-1~deb12u1) ...
#15 176.7 Setting up swig4.0 (4.1.0-0.2) ...
#15 176.7 Setting up libfido2-1:amd64 (1.12.0-2+b1) ...
#15 176.8 Setting up libboost-python1.74.0 (1.74.0+ds1-21) ...
#15 176.8 Setting up libisl23:amd64 (0.25-1.1) ...
#15 176.9 Setting up libaio1:amd64 (0.3.113-4) ...
#15 176.9 Setting up libasound2-dev:amd64 (1.2.8-1+b1) ...
#15 177.0 Setting up libde265-0:amd64 (1.0.11-1+deb12u2) ...
#15 177.0 Setting up libboost-fiber1.74.0:amd64 (1.74.0+ds1-21) ...
#15 177.1 Setting up libc-dev-bin (2.36-9+deb12u9) ...
#15 177.2 Setting up liboping-dev:amd64 (1.10.0-5+b1) ...
#15 177.2 Setting up libtasn1-6-dev:amd64 (4.19.0-2) ...
#15 177.3 Setting up libwebpmux3:amd64 (1.2.4-0.2+deb12u1) ...
#15 177.3 Setting up libbsd0:amd64 (0.11.7-2) ...
#15 177.4 Setting up libparmap-ocaml (1.2.5-1) ...
#15 177.4 Setting up python3-wheel-whl (0.38.4-2) ...
#15 177.5 Setting up libyuv0:amd64 (0.0~git20230123.b2528b0-1) ...
#15 177.5 Setting up libelf1:amd64 (0.188-2.1) ...
#15 177.5 Setting up libjson-c5:amd64 (0.16-2) ...
#15 177.6 Setting up libboost-timer1.74.0:amd64 (1.74.0+ds1-21) ...
#15 177.6 Setting up openjade (1.4devel1-22) ...
#15 177.8 Setting up libxml2:amd64 (2.9.14+dfsg-1.3~deb12u1) ...
#15 177.8 Setting up xdg-utils (1.1.3-4.1) ...
#15 177.9 update-alternatives: using /usr/bin/xdg-open to provide /usr/bin/open (open) in auto mode
#15 177.9 update-alternatives: warning: skip creation of /usr/share/man/man1/open.1.gz because associated file /usr/share/man/man1/xdg-open.1.gz (of link group open) doesn't exist
#15 177.9 Setting up libbsd-dev:amd64 (0.11.7-2) ...
#15 178.0 Setting up libcc1-0:amd64 (12.2.0-14) ...
#15 178.0 Setting up libjansson-dev:amd64 (2.14-2) ...
#15 178.1 Setting up dbus-bin (1.14.10-1~deb12u1) ...
#15 178.1 Setting up sqlite3 (3.40.1-2+deb12u1) ...
#15 178.2 Setting up gpg (2.2.40-1.1) ...
#15 178.2 Setting up libgps28:amd64 (3.22-4.1+b1) ...
#15 178.3 Setting up libbpf1:amd64 (1:1.1.0-1) ...
#15 178.3 Setting up liblsan0:amd64 (12.2.0-14) ...
#15 178.4 Setting up libp11-kit-dev:amd64 (0.24.1-2) ...
#15 178.4 Setting up libitm1:amd64 (12.2.0-14) ...
#15 178.5 Setting up libsofia-sip-ua-glib3 (1.12.11+20110422.1+1e14eea~dfsg-6) ...
#15 178.5 Setting up libsource-highlight4v5:amd64 (3.1.9-4.2+b3) ...
#15 178.6 Setting up libsynctex2:amd64 (2022.20220321.62855-5.1+deb12u2) ...
#15 178.6 Setting up libkmod2:amd64 (30+20221128-1) ...
#15 178.7 Setting up libgdbm6:amd64 (1.23-3) ...
#15 178.8 Setting up libjs-underscore (1.13.4~dfsg+~1.11.4-3) ...
#15 178.8 Setting up libpopt0:amd64 (1.19+dfsg-1) ...
#15 178.9 Setting up libboost-thread1.74.0:amd64 (1.74.0+ds1-21) ...
#15 178.9 Setting up libboost-numpy1.74.0 (1.74.0+ds1-21) ...
#15 179.0 Setting up gnupg-utils (2.2.40-1.1) ...
#15 179.0 Setting up libevent-pthreads-2.1-7:amd64 (2.1.12-stable-8) ...
#15 179.1 Setting up libhiredis0.14:amd64 (0.14.1-3) ...
#15 179.1 Setting up libcsv3:amd64 (3.0.3+dfsg-6) ...
#15 179.2 Setting up libctf0:amd64 (2.40-2) ...
#15 179.2 Setting up pinentry-curses (1.2.1-1) ...
#15 179.3 Setting up libdbi-dev (0.9.0-6) ...
#15 179.3 Setting up teckit (2.5.11+ds1-1+b1) ...
#15 179.4 Setting up libice6:amd64 (2:1.0.10-1) ...
#15 179.4 Setting up libboost-log1.74.0 (1.74.0+ds1-21) ...
#15 179.5 Setting up libxdmcp6:amd64 (1:1.1.2-3) ...
#15 179.5 Setting up libevent-extra-2.1-7:amd64 (2.1.12-stable-8) ...
#15 179.6 Setting up flex (2.6.4-8.2) ...
#15 179.6 Setting up cpp-12 (12.2.0-14) ...
#15 179.7 Setting up libxcb1:amd64 (1.15-1) ...
#15 179.7 Setting up gettext (0.21-12) ...
#15 179.8 Setting up libfftw3-single3:amd64 (3.3.10-1) ...
#15 179.8 Setting up swig (4.1.0-0.2) ...
#15 179.9 Setting up libgmp-dev:amd64 (2:6.2.1+dfsg1-1.1) ...
#15 179.9 Setting up gpg-agent (2.2.40-1.1) ...
#15 180.1 Created symlink /etc/systemd/user/sockets.target.wants/gpg-agent-browser.socket → /usr/lib/systemd/user/gpg-agent-browser.socket.

#15 180.1 Created symlink /etc/systemd/user/sockets.target.wants/gpg-agent-extra.socket → /usr/lib/systemd/user/gpg-agent-extra.socket.

#15 180.2 Created symlink /etc/systemd/user/sockets.target.wants/gpg-agent-ssh.socket → /usr/lib/systemd/user/gpg-agent-ssh.socket.

#15 180.2 Created symlink /etc/systemd/user/sockets.target.wants/gpg-agent.socket → /usr/lib/systemd/user/gpg-agent.socket.

#15 180.3 Setting up libpdfbox-java (1:1.8.16-2) ...
#15 180.3 Setting up libavif15:amd64 (0.11.1-1) ...
#15 180.4 Setting up libmbedx509-1:amd64 (2.28.3-1) ...
#15 180.4 Setting up libmbedtls14:amd64 (2.28.3-1) ...
#15 180.5 Setting up nettle-dev:amd64 (3.8.1-2) ...
#15 180.6 Setting up libcsv-dev:amd64 (3.0.3+dfsg-6) ...
#15 180.6 Setting up libopts25-dev:amd64 (1:5.18.16-5) ...
#15 180.7 Setting up guile-3.0-libs:amd64 (3.0.8-2) ...
#15 180.7 Setting up libarchive13:amd64 (3.6.2-1+deb12u2) ...
#15 180.8 Setting up libxcb-render0:amd64 (1.15-1) ...
#15 180.8 Setting up fontconfig-config (2.14.1-4) ...
#15 181.0 debconf: unable to initialize frontend: Dialog
#15 181.0 debconf: (TERM is not set, so the dialog frontend is not usable.)
#15 181.0 debconf: falling back to frontend: Readline
#15 181.0 debconf: unable to initialize frontend: Readline
#15 181.0 debconf: (This frontend requires a controlling tty.)
#15 181.0 debconf: falling back to frontend: Teletype
#15 181.2 Setting up libdbd-sqlite3:amd64 (0.9.0-11) ...
#15 181.2 Setting up libbctoolbox1:amd64 (5.1.64-2) ...
#15 181.3 Setting up libboost-coroutine1.74.0:amd64 (1.74.0+ds1-21) ...
#15 181.3 Setting up libwebpdemux2:amd64 (1.2.4-0.2+deb12u1) ...
#15 181.4 Setting up gcc-arm-none-eabi (15:12.2.rel1-1) ...
#15 181.4 Setting up libedit2:amd64 (3.1-20221030-2) ...
#15 181.5 Setting up gpgsm (2.2.40-1.1) ...
#15 181.5 Setting up ccache (4.8+really4.7.5-1) ...
#15 181.6 Updating symlinks in /usr/lib/ccache ...
#15 181.6 Setting up libcommons-parent-java (56-1) ...
#15 181.6 Setting up libavahi-common3:amd64 (0.8-10+deb12u1) ...
#15 181.7 Setting up inetutils-telnet (2:2.4-2+deb12u1) ...
#15 181.7 update-alternatives: using /usr/bin/inetutils-telnet to provide /usr/bin/telnet (telnet) in auto mode
#15 181.7 update-alternatives: warning: skip creation of /usr/share/man/man1/telnet.1.gz because associated file /usr/share/man/man1/inetutils-telnet.1.gz (of link group telnet) doesn't exist
#15 181.8 Setting up libfindlib-ocaml (1.9.6-1+b1) ...
#15 181.8 Setting up libcommons-logging-java (1.2-3) ...
#15 181.9 Setting up libevent-openssl-2.1-7:amd64 (2.1.12-stable-8) ...
#15 181.9 Setting up libglib2.0-bin (2.74.6-2+deb12u5) ...
#15 182.0 Setting up libfftw3-long3:amd64 (3.3.10-1) ...
#15 182.0 Setting up libusb-1.0-0-dev:amd64 (2:1.0.26-1) ...
#15 182.1 Setting up libboost-tools-dev (1.74.0.3) ...
#15 182.1 Setting up libnftnl11:amd64 (1.2.4-2) ...
#15 182.2 Setting up libxcb-shm0:amd64 (1.15-1) ...
#15 182.3 Setting up dbus-daemon (1.14.10-1~deb12u1) ...
#15 182.3 Setting up libcdk5nc6:amd64 (5.0.20180306-3) ...
#15 182.4 Setting up opensp (1.5.2-13+b2) ...
#15 182.4 Setting up libaio-dev:amd64 (0.3.113-4) ...
#15 182.5 Setting up libboost-nowide-dev (1.74.0.3) ...
#15 182.5 Setting up libbladerf2:amd64 (0.2022.11-1) ...
#15 182.6 Setting up libldap-2.5-0:amd64 (2.5.13+dfsg-5) ...
#15 182.6 Setting up sdcc (4.2.0+dfsg-1) ...
#15 182.7 Setting up pkgconf:amd64 (1.8.1-1) ...
#15 182.7 Setting up libnl-route-3-200:amd64 (3.7.0-0.2+b1) ...
#15 182.8 Setting up dirmngr (2.2.40-1.1) ...
#15 182.9 Created symlink /etc/systemd/user/sockets.target.wants/dirmngr.socket → /usr/lib/systemd/user/dirmngr.socket.

#15 182.9 Setting up libtalloc-dev:amd64 (2.4.0-f2) ...
#15 183.0 Setting up libthai0:amd64 (0.1.29-1) ...
#15 183.0 Setting up libgprofng0:amd64 (2.40-2) ...
#15 183.1 Setting up libunbound8:amd64 (1.17.1-2+deb12u2) ...
#15 183.1 Setting up libjs-jquery-ui (1.13.2+dfsg-1) ...
#15 183.2 Setting up libptexenc1:amd64 (2022.20220321.62855-5.1+deb12u2) ...
#15 183.3 Setting up libfreetype6:amd64 (2.12.1+dfsg-5+deb12u3) ...
#15 183.3 Setting up libpcap0.8:amd64 (1.10.3-1) ...
#15 183.4 Setting up libmnl-dev:amd64 (1.0.4-3) ...
#15 183.4 Setting up dbus (1.14.10-1~deb12u1) ...
#15 183.5 invoke-rc.d: could not determine current runlevel
#15 183.5 invoke-rc.d: policy-rc.d denied execution of start.
#15 183.5 Setting up libfftw3-quad3:amd64 (3.3.10-1) ...
#15 183.6 Setting up libgcc-12-dev:amd64 (12.2.0-14) ...
#15 183.7 Setting up shared-mime-info (2.2-1) ...
#15 191.6 Setting up ofono (1.31-3+b1) ...
#15 191.7 invoke-rc.d: could not determine current runlevel
#15 191.7 invoke-rc.d: policy-rc.d denied execution of start.
#15 191.8 invoke-rc.d: could not determine current runlevel
#15 191.8 invoke-rc.d: policy-rc.d denied execution of start.
#15 191.8 Created symlink /etc/systemd/system/multi-user.target.wants/dundee.service → /lib/systemd/system/dundee.service.

#15 191.9 Created symlink /etc/systemd/system/multi-user.target.wants/ofono.service → /lib/systemd/system/ofono.service.

#15 191.9 Setting up ocaml-findlib (1.9.6-1+b1) ...
#15 192.0 Setting up libevent-dev (2.1.12-stable-8) ...
#15 192.0 Setting up libnftnl-dev:amd64 (1.2.4-2) ...
#15 192.1 Setting up libgssapi-krb5-2:amd64 (1.20.1-2+deb12u2) ...
#15 192.1 Setting up libortp16:amd64 (1:5.1.64-2) ...
#15 192.2 Setting up libsystemd-shared:amd64 (252.33-1~deb12u1) ...
#15 192.2 Setting up libboost-numpy1.74-dev (1.74.0+ds1-21) ...
#15 192.3 Setting up pkg-config:amd64 (1.8.1-1) ...
#15 192.3 Setting up libgdbm-compat4:amd64 (1.23-3) ...
#15 192.4 Setting up libbctoolbox-dev:amd64 (5.1.64-2) ...
#15 192.5 Setting up ucf (3.0043+nmu1+deb12u1) ...
#15 192.6 debconf: unable to initialize frontend: Dialog
#15 192.6 debconf: (TERM is not set, so the dialog frontend is not usable.)
#15 192.6 debconf: falling back to frontend: Readline
#15 192.6 debconf: unable to initialize frontend: Readline
#15 192.6 debconf: (This frontend requires a controlling tty.)
#15 192.6 debconf: falling back to frontend: Teletype
#15 192.6 Setting up gir1.2-glib-2.0:amd64 (1.74.0-3) ...
#15 192.7 Setting up libjs-sphinxdoc (5.3.0-4) ...
#15 192.7 Setting up libx265-199:amd64 (3.5-2+b1) ...
#15 192.8 Setting up libsofia-sip-ua-dev (1.12.11+20110422.1+1e14eea~dfsg-6) ...
#15 192.8 Setting up gpg-wks-server (2.2.40-1.1) ...
#15 192.9 Setting up libllvm14:amd64 (1:14.0.6-12) ...
#15 192.9 Setting up libboost-wave1.74.0:amd64 (1.74.0+ds1-21) ...
#15 193.0 Setting up libgvpr2:amd64 (2.42.2-7+deb12u1) ...
#15 193.0 Setting up dwz (0.15-1) ...
#15 193.1 Setting up libnl-3-dev:amd64 (3.7.0-0.2+b1) ...
#15 193.1 Setting up groff-base (1.22.4-10) ...
#15 193.2 Setting up cpp (4:12.2.0-3) ...
#15 193.3 Setting up xml-core (0.18+nmu1) ...
#15 193.4 Setting up source-highlight (3.1.9-4.2+b3) ...
#15 193.5 Setting up libnl-genl-3-200:amd64 (3.7.0-0.2+b1) ...
#15 193.5 Setting up libxslt1.1:amd64 (1.1.35-1) ...
#15 193.6 Setting up libcurl4:amd64 (7.88.1-10+deb12u8) ...
#15 193.6 Setting up libx11-6:amd64 (2:1.8.4-2+deb12u2) ...
#15 193.7 Setting up libharfbuzz0b:amd64 (6.0.0+dfsg-3) ...
#15 193.7 Setting up libgdk-pixbuf-2.0-0:amd64 (2.42.10+dfsg-1+deb12u1) ...
#15 193.8 Setting up curl (7.88.1-10+deb12u8) ...
#15 193.9 Setting up libfontconfig1:amd64 (2.14.1-4) ...
#15 193.9 Setting up lynx (2.9.0dev.12-1) ...
#15 194.0 update-alternatives: using /usr/bin/lynx to provide /usr/bin/www-browser (www-browser) in auto mode
#15 194.0 update-alternatives: warning: skip creation of /usr/share/man/man1/www-browser.1.gz because associated file /usr/share/man/man1/lynx.1.gz (of link group www-browser) doesn't exist
#15 194.0 Setting up picolibc-arm-none-eabi (1.8-1) ...
#15 194.1 Setting up libxml2-utils (2.9.14+dfsg-1.3~deb12u1) ...
#15 194.1 Setting up libboost-locale1.74.0:amd64 (1.74.0+ds1-21) ...
#15 194.2 Setting up libsm6:amd64 (2:1.2.3-1) ...
#15 194.2 Setting up libgps-dev:amd64 (3.22-4.1+b1) ...
#15 194.3 Setting up libavahi-client3:amd64 (0.8-10+deb12u1) ...
#15 194.3 Setting up libperl5.36:amd64 (5.36.0-7+deb12u1) ...
#15 194.4 Setting up libortp-dev:amd64 (1:5.1.64-2) ...
#15 194.4 Setting up rsync (3.2.7-1+deb12u2) ...
#15 194.5 invoke-rc.d: could not determine current runlevel
#15 194.5 invoke-rc.d: policy-rc.d denied execution of start.
#15 194.6 Setting up libboost-type-erasure1.74.0:amd64 (1.74.0+ds1-21) ...
#15 194.6 Setting up binutils-x86-64-linux-gnu (2.40-2) ...
#15 194.7 Setting up libtirpc3:amd64 (1.3.3+ds-1) ...
#15 194.7 Setting up libpaper1:amd64 (1.1.29) ...
#15 194.8 debconf: unable to initialize frontend: Dialog
#15 194.8 debconf: (TERM is not set, so the dialog frontend is not usable.)
#15 194.8 debconf: falling back to frontend: Readline
#15 194.8 debconf: unable to initialize frontend: Readline
#15 194.8 debconf: (This frontend requires a controlling tty.)
#15 194.8 debconf: falling back to frontend: Teletype
#15 194.9 
#15 194.9 Creating config file /etc/papersize with new version
#15 194.9 Setting up tcpdump (4.99.3-1) ...
#15 195.2 Setting up libibverbs1:amd64 (44.0-2) ...
#15 195.3 Setting up fontconfig (2.14.1-4) ...
#15 195.4 Regenerating fonts cache... done.
#15 197.8 Setting up libgnutls-dane0:amd64 (3.7.9-2+deb12u3) ...
#15 197.8 Setting up libnftables1:amd64 (1.0.6-2+deb12u2) ...
#15 197.9 Setting up telnet (0.17+2.4-2+deb12u1) ...
#15 197.9 Setting up libzmq5:amd64 (4.3.4-6) ...
#15 198.0 Setting up libxpm4:amd64 (1:3.5.12-1.1+deb12u1) ...
#15 198.0 Setting up gpg-wks-client (2.2.40-1.1) ...
#15 198.1 Setting up libxrender1:amd64 (1:0.9.10-1.1) ...
#15 198.1 Setting up ibverbs-providers:amd64 (44.0-2) ...
#15 198.5 Setting up libnftables-dev:amd64 (1.0.6-2+deb12u2) ...
#15 198.5 Setting up libsombok3:amd64 (2.4.0-2+b1) ...
#15 198.6 Setting up libfftw3-bin (3.3.10-1) ...
#15 198.6 Setting up htop (3.2.2-2) ...
#15 198.7 Setting up iproute2 (6.1.0-3) ...
#15 198.9 debconf: unable to initialize frontend: Dialog
#15 198.9 debconf: (TERM is not set, so the dialog frontend is not usable.)
#15 198.9 debconf: falling back to frontend: Readline
#15 198.9 debconf: unable to initialize frontend: Readline
#15 198.9 debconf: (This frontend requires a controlling tty.)
#15 198.9 debconf: falling back to frontend: Teletype
#15 199.0 Setting up openssh-client (1:9.2p1-2+deb12u4) ...
#15 199.2 Setting up libpango-1.0-0:amd64 (1.50.12+ds-1) ...
#15 199.2 Setting up libheif1:amd64 (1.15.1-1+deb12u1) ...
#15 199.3 Setting up xsltproc (1.1.35-1) ...
#15 199.3 Setting up libxext6:amd64 (2:1.3.4-1+b1) ...
#15 199.4 Setting up libclang1-14 (1:14.0.6-12) ...
#15 199.4 Setting up libcurl3-gnutls:amd64 (7.88.1-10+deb12u8) ...
#15 199.5 Setting up libgfortran-12-dev:amd64 (12.2.0-14) ...
#15 199.5 Setting up binutils (2.40-2) ...
#15 199.6 Setting up libpaper-utils (1.1.29) ...
#15 199.6 Setting up xfonts-utils (1:7.7+6) ...
#15 199.7 Setting up man-db (2.11.2-2) ...
#15 199.8 debconf: unable to initialize frontend: Dialog
#15 199.8 debconf: (TERM is not set, so the dialog frontend is not usable.)
#15 199.8 debconf: falling back to frontend: Readline
#15 199.8 debconf: unable to initialize frontend: Readline
#15 199.8 debconf: (This frontend requires a controlling tty.)
#15 199.8 debconf: falling back to frontend: Teletype
#15 199.8 Building database of manual pages ...
#15 199.9 Created symlink /etc/systemd/system/timers.target.wants/man-db.timer → /lib/systemd/system/man-db.timer.

#15 199.9 Setting up libcairo2:amd64 (1.16.0-7) ...
#15 200.0 Setting up libxnvctrl0:amd64 (525.85.05-3~deb12u1) ...
#15 200.0 Setting up tex-common (6.18) ...
#15 200.1 debconf: unable to initialize frontend: Dialog
#15 200.1 debconf: (TERM is not set, so the dialog frontend is not usable.)
#15 200.1 debconf: falling back to frontend: Readline
#15 200.1 debconf: unable to initialize frontend: Readline
#15 200.1 debconf: (This frontend requires a controlling tty.)
#15 200.1 debconf: falling back to frontend: Teletype
#15 200.2 update-language: texlive-base not installed and configured, doing nothing!
#15 200.3 Setting up libnl-route-3-dev:amd64 (3.7.0-0.2+b1) ...
#15 200.3 Setting up libgssrpc4:amd64 (1.20.1-2+deb12u2) ...
#15 200.4 Setting up perl (5.36.0-7+deb12u1) ...
#15 200.5 Setting up libtirpc-dev:amd64 (1.3.3+ds-1) ...
#15 200.5 Setting up gcc-12 (12.2.0-14) ...
#15 200.6 Setting up libraqm0:amd64 (0.7.0-4.1) ...
#15 200.6 Setting up libboost-numpy-dev (1.74.0.3) ...
#15 200.7 Setting up libgd3:amd64 (2.3.3-9) ...
#15 200.7 Setting up stow (2.3.1-1) ...
#15 200.8 Setting up libio-html-perl (1.004-3) ...
#15 200.8 Setting up libb-hooks-op-check-perl:amd64 (0.22-2+b1) ...
#15 200.9 Setting up libclang-cpp14 (1:14.0.6-12) ...
#15 201.0 Setting up libxt6:amd64 (1:1.2.1-1.1) ...
#15 201.0 Setting up libdpkg-perl (1.21.22) ...
#15 201.1 Setting up autoconf (2.71-3) ...
#15 201.1 Setting up libtimedate-perl (2.3300-2) ...
#15 201.2 Setting up libregexp-ipv6-perl (0.03-3) ...
#15 201.2 Setting up module-assistant (0.11.11) ...
#15 201.4 Setting up libcups2:amd64 (2.4.2-3+deb12u8) ...
#15 201.4 Setting up libmime-charset-perl (1.013.1-2) ...
#15 201.5 Setting up lmodern (2.005-1) ...
#15 201.7 Setting up libjson-perl (4.10000-1) ...
#15 201.7 Setting up libnsl2:amd64 (1.3.0-2) ...
#15 201.8 Setting up gnupg (2.2.40-1.1) ...
#15 201.9 Setting up cmake (3.25.1-1) ...
#15 201.9 Setting up libsub-override-perl (0.09-4) ...
#15 202.0 Setting up libsub-quote-perl (2.006008-1) ...
#15 202.0 Setting up libclass-xsaccessor-perl (1.19-4+b1) ...
#15 202.1 Setting up libcairo-gobject2:amd64 (1.16.0-7) ...
#15 202.1 Setting up libpangoft2-1.0-0:amd64 (1.50.12+ds-1) ...
#15 202.2 Setting up libfile-dirlist-perl (0.05-3) ...
#15 202.2 Setting up libtext-unidecode-perl (1.30-3) ...
#15 202.3 Setting up libperlio-gzip-perl (0.20-1+b1) ...
#15 202.3 Setting up mailcap (3.70+nmu1) ...
#15 202.5 Setting up libfftw3-dev:amd64 (3.3.10-1) ...
#15 202.5 Setting up tex-gyre (20180621-6) ...
#15 202.7 Setting up liburi-perl (5.17-1) ...
#15 202.8 Setting up libfile-touch-perl (0.12-2) ...
#15 202.8 Setting up libpangocairo-1.0-0:amd64 (1.50.12+ds-1) ...
#15 202.9 Setting up libkadm5clnt-mit12:amd64 (1.20.1-2+deb12u2) ...
#15 202.9 Setting up libnet-ssleay-perl:amd64 (1.92-2+b1) ...
#15 203.0 Setting up automake (1:1.16.5-1.3) ...
#15 203.0 update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode
#15 203.0 update-alternatives: warning: skip creation of /usr/share/man/man1/automake.1.gz because associated file /usr/share/man/man1/automake-1.16.1.gz (of link group automake) doesn't exist
#15 203.0 update-alternatives: warning: skip creation of /usr/share/man/man1/aclocal.1.gz because associated file /usr/share/man/man1/aclocal-1.16.1.gz (of link group automake) doesn't exist
#15 203.0 Setting up librdmacm1:amd64 (44.0-2) ...
#15 203.1 Setting up libhttp-date-perl (6.05-2) ...
#15 203.1 Setting up libfile-which-perl (1.27-2) ...
#15 203.2 Setting up libucx0:amd64 (1.13.1-1) ...
#15 203.2 Setting up libsgmls-perl (1.03ii-38) ...
#15 203.3 Setting up libxmu6:amd64 (2:1.1.3-3) ...
#15 203.3 Setting up libkdb5-10:amd64 (1.20.1-2+deb12u2) ...
#15 203.4 Setting up libfile-listing-perl (6.15-1) ...
#15 203.4 Setting up mime-support (3.66) ...
#15 203.5 Setting up libxi6:amd64 (2:1.8-1+b1) ...
#15 203.5 Setting up libdynaloader-functions-perl (0.003-3) ...
#15 203.6 Setting up libclass-method-modifiers-perl (2.14-1) ...
#15 203.6 Setting up libio-pty-perl (1:1.17-1) ...
#15 203.7 Setting up sgmlspl (1.03ii-38) ...
#15 203.7 Setting up mscgen (0.20-14) ...
#15 203.8 Setting up libclone-perl:amd64 (0.46-1) ...
#15 203.9 Setting up libarchive-zip-perl (1.68-1) ...
#15 203.9 Setting up libhtml-tagset-perl (3.20-6) ...
#15 204.0 Setting up preview-latex-style (12.2-1) ...
#15 204.0 Setting up libpython3.11-stdlib:amd64 (3.11.2-6+deb12u5) ...
#15 204.1 Setting up libdebhelper-perl (13.11.4) ...
#15 204.1 Setting up liblwp-mediatypes-perl (6.04-2) ...
#15 204.2 Setting up libtry-tiny-perl (0.31-2) ...
#15 204.2 Setting up libxml-namespacesupport-perl (1.12-2) ...
#15 204.3 Setting up libnet-http-perl (6.22-1) ...
#15 204.3 Setting up libencode-locale-perl (1.05-3) ...
#15 204.4 Setting up libxaw7:amd64 (2:1.0.14-1) ...
#15 204.4 Setting up fonts-urw-base35 (20200910-7) ...
#15 204.7 Setting up libibverbs-dev:amd64 (44.0-2) ...
#15 204.8 Setting up libhwloc-plugins:amd64 (2.9.0-1) ...
#15 204.8 Setting up libdevel-callchecker-perl:amd64 (0.008-2) ...
#15 204.9 Setting up gcc (4:12.2.0-3) ...
#15 205.0 Setting up autogen (1:5.18.16-5) ...
#15 205.0 Setting up dpkg-dev (1.21.22) ...
#15 205.1 Setting up intltool-debian (0.35.0+20060710.6) ...
#15 205.1 Setting up librsvg2-2:amd64 (2.54.7+dfsg-1~deb12u1) ...
#15 205.2 Setting up liberror-perl (0.17029-2) ...
#15 205.2 Setting up patchutils (0.4.2-1) ...
#15 205.3 Setting up libltdl-dev:amd64 (2.4.7-7~deb12u1) ...
#15 205.4 Setting up libxml-sax-base-perl (1.09-3) ...
#15 205.4 Setting up doxygen (1.9.4-4) ...
#15 205.5 Setting up libwrap0:amd64 (7.6.q-32) ...
#15 205.5 Setting up libunicode-linebreak-perl (0.0.20190101-1+b5) ...
#15 205.6 Setting up libgvc6 (2.42.2-7+deb12u1) ...
#15 205.6 Setting up libipc-run-perl (20220807.0-1) ...
#15 205.7 Setting up git (1:2.39.5-0+deb12u1) ...
#15 205.8 Setting up libwww-robotrules-perl (6.02-1) ...
#15 205.8 Setting up libnsl-dev:amd64 (1.3.0-2) ...
#15 205.9 Setting up texlive-binaries (2022.20220321.62855-5.1+deb12u2) ...
#15 205.9 update-alternatives: using /usr/bin/xdvi-xaw to provide /usr/bin/xdvi.bin (xdvi.bin) in auto mode
#15 205.9 update-alternatives: using /usr/bin/bibtex.original to provide /usr/bin/bibtex (bibtex) in auto mode
#15 205.9 update-alternatives: warning: skip creation of /usr/share/man/man1/bibtex.1.gz because associated file /usr/share/man/man1/bibtex.original.1.gz (of link group bibtex) doesn't exist
#15 206.0 Setting up libwrap0-dev:amd64 (7.6.q-32) ...
#15 206.1 Setting up libhtml-parser-perl:amd64 (3.81-1) ...
#15 206.1 Setting up libkadm5srv-mit12:amd64 (1.20.1-2+deb12u2) ...
#15 206.2 Setting up librole-tiny-perl (2.002004-1) ...
#15 206.3 Setting up libc6-dev:amd64 (2.36-9+deb12u9) ...
#15 206.3 Setting up libfile-homedir-perl (1.006-2) ...
#15 206.4 Setting up texlive-base (2022.20230122-3) ...
#15 207.1 tl-paper: setting paper size for dvips to a4: /var/lib/texmf/dvips/config/config-paper.ps
#15 207.2 tl-paper: setting paper size for dvipdfmx to a4: /var/lib/texmf/dvipdfmx/dvipdfmx-paper.cfg
#15 207.4 tl-paper: setting paper size for xdvi to a4: /var/lib/texmf/xdvi/XDvi-paper
#15 207.5 tl-paper: setting paper size for pdftex to a4: /var/lib/texmf/tex/generic/tex-ini-files/pdftexconfig.tex
#15 207.5 debconf: unable to initialize frontend: Dialog
#15 207.5 debconf: (TERM is not set, so the dialog frontend is not usable.)
#15 207.5 debconf: falling back to frontend: Readline
#15 207.5 debconf: unable to initialize frontend: Readline
#15 207.5 debconf: (This frontend requires a controlling tty.)
#15 207.5 debconf: falling back to frontend: Teletype
#15 207.9 Setting up libicu-dev:amd64 (72.1-3) ...
#15 208.0 Setting up libio-socket-ssl-perl (2.081-2) ...
#15 208.0 Setting up liburing-dev:amd64 (2.3-3) ...
#15 208.1 Setting up libpython3-stdlib:amd64 (3.11.2-1+b1) ...
#15 208.1 Setting up libhttp-message-perl (6.44-1) ...
#15 208.2 Setting up libgnutls28-dev:amd64 (3.7.9-2+deb12u3) ...
#15 208.2 Setting up libfile-stripnondeterminism-perl (1.13.1-1) ...
#15 208.3 Setting up graphviz (2.42.2-7+deb12u1) ...
#15 208.4 Setting up libfabric1:amd64 (1.17.0-3) ...
#15 208.4 Setting up libgs10-common (10.0.0~dfsg-11+deb12u6) ...
#15 208.5 Setting up librsvg2-bin (2.54.7+dfsg-1~deb12u1) ...
#15 208.5 Setting up python3.11 (3.11.2-6+deb12u5) ...
#15 209.0 Setting up libhttp-negotiate-perl (6.01-2) ...
#15 209.0 Setting up libncurses-dev:amd64 (6.4-4) ...
#15 209.1 Setting up libbladerf-dev:amd64 (0.2022.11-1) ...
#15 209.1 Setting up libpython3.11:amd64 (3.11.2-6+deb12u5) ...
#15 209.2 Setting up libpcre2-dev:amd64 (10.42-1) ...
#15 209.2 Setting up libpmix2:amd64 (4.2.2-1+deb12u1) ...
#15 209.3 Setting up libstdc++-12-dev:amd64 (12.2.0-14) ...
#15 209.3 Setting up libhttp-cookies-perl (6.10-1) ...
#15 209.4 Setting up libtool (2.4.7-7~deb12u1) ...
#15 209.4 Setting up texlive-luatex (2022.20230122-3) ...
#15 209.5 Setting up libselinux1-dev:amd64 (3.4-1+b6) ...
#15 209.6 Setting up po-debconf (1.0.21+nmu1) ...
#15 209.6 Setting up libhtml-tree-perl (5.07-3) ...
#15 209.7 Setting up libopenmpi3:amd64 (4.1.4-3+b1) ...
#15 209.7 Setting up libparams-classify-perl:amd64 (0.015-2+b1) ...
#15 209.8 Setting up libboost-mpi1.74.0 (1.74.0+ds1-21) ...
#15 209.8 Setting up texlive-plain-generic (2022.20230122-4) ...
#15 209.9 Setting up lcov (1.16-1) ...
#15 210.0 Setting up python3 (3.11.2-1+b1) ...
#15 210.0 running python rtupdate hooks for python3.11...
#15 210.2 running python post-rtupdate hooks for python3.11...
#15 210.3 Setting up texlive-lang-greek (2022.20230122-1) ...
#15 210.4 Setting up libusb-dev (2:0.1.12-32) ...
#15 210.5 Setting up libreadline-dev:amd64 (8.2-1.3) ...
#15 210.5 Setting up python3-distlib (0.3.6-1) ...
#15 210.7 Setting up python3-markupsafe (2.1.2-1+b1) ...
#15 210.8 Setting up libxml-sax-perl (1.02+dfsg-3) ...
#15 210.9 update-perl-sax-parsers: Registering Perl SAX parser XML::SAX::PurePerl with priority 10...
#15 210.9 update-perl-sax-parsers: Updating overall Perl SAX parser modules info file...
#15 211.0 debconf: unable to initialize frontend: Dialog
#15 211.0 debconf: (TERM is not set, so the dialog frontend is not usable.)
#15 211.0 debconf: falling back to frontend: Readline
#15 211.0 debconf: unable to initialize frontend: Readline
#15 211.0 debconf: (This frontend requires a controlling tty.)
#15 211.0 debconf: falling back to frontend: Teletype
#15 211.0 
#15 211.0 Creating config file /etc/perl/XML/SAX/ParserDetails.ini with new version
#15 211.1 Setting up python3-platformdirs (2.6.0-1) ...
#15 211.2 Setting up libcdk5-dev (5.0.20180306-3) ...
#15 211.2 Setting up libnuma-dev:amd64 (2.0.16-1) ...
#15 211.3 Setting up python3-six (1.16.0-4) ...
#15 211.4 Setting up dh-autoreconf (20) ...
#15 211.4 Setting up asciidoc-common (10.2.0-1) ...
#15 212.4 Setting up python3-pil:amd64 (9.4.0-1.1+deb12u1) ...
#15 212.6 Setting up python3-roman (3.3-3) ...
#15 212.8 Setting up gfortran-12 (12.2.0-14) ...
#15 212.8 Setting up libxml2-dev:amd64 (2.9.14+dfsg-1.3~deb12u1) ...
#15 212.9 Setting up libsnmp40:amd64 (5.9.3+dfsg-2) ...
#15 212.9 Setting up python3-webcolors (1.11.1-1) ...
#15 213.1 Setting up libexpat1-dev:amd64 (2.5.0-1+deb12u1) ...
#15 213.1 Setting up libsqlite3-dev:amd64 (3.40.1-2+deb12u1) ...
#15 213.2 Setting up texlive-latex-base (2022.20230122-3) ...
#15 213.3 Setting up libmodule-runtime-perl (0.016-2) ...
#15 213.3 Setting up texlive-extra-utils (2022.20230122-4) ...
#15 213.4 Setting up uuid-dev:amd64 (2.38.1-5+deb12u3) ...
#15 213.4 Setting up python3-dill (0.3.6-1) ...
#15 213.6 Setting up python3-gi (3.42.2-3+b1) ...
#15 213.8 Setting up texlive-latex-recommended (2022.20230122-3) ...
#15 213.8 Setting up python3-reportlab-accel:amd64 (3.6.12-1+deb12u1) ...
#15 213.9 Setting up comerr-dev:amd64 (2.1-1.47.0-2) ...
#15 213.9 Setting up python3-wrapt (1.14.1-2+b2) ...
#15 214.0 Setting up libsctp-dev:amd64 (1.0.19+dfsg-2) ...
#15 214.1 Setting up python3-funcparserlib (1.0.0-0.2) ...
#15 214.2 Setting up python3-typing-extensions (4.4.0-1) ...
#15 214.4 Setting up python3-toml (0.10.2-1) ...
#15 214.5 Setting up texlive-pictures (2022.20230122-3) ...
#15 214.6 Setting up python3-isort (5.6.4-1) ...
#15 214.8 Setting up python3-reportlab (3.6.12-1+deb12u1) ...
#15 215.1 Setting up libxml-libxml-perl (2.0207+dfsg+really+2.0134-1+b1) ...
#15 215.2 update-perl-sax-parsers: Registering Perl SAX parser XML::LibXML::SAX::Parser with priority 50...
#15 215.2 update-perl-sax-parsers: Registering Perl SAX parser XML::LibXML::SAX with priority 50...
#15 215.3 update-perl-sax-parsers: Updating overall Perl SAX parser modules info file...
#15 215.3 debconf: unable to initialize frontend: Dialog
#15 215.3 debconf: (TERM is not set, so the dialog frontend is not usable.)
#15 215.3 debconf: falling back to frontend: Readline
#15 215.3 debconf: unable to initialize frontend: Readline
#15 215.3 debconf: (This frontend requires a controlling tty.)
#15 215.3 debconf: falling back to frontend: Teletype
#15 215.4 Replacing config file /etc/perl/XML/SAX/ParserDetails.ini with new version
#15 215.4 Setting up libnetsnmptrapd40:amd64 (5.9.3+dfsg-2) ...
#15 215.5 Setting up dh-strip-nondeterminism (1.13.1-1) ...
#15 215.5 Setting up zlib1g-dev:amd64 (1:1.2.13.dfsg-1) ...
#15 215.6 Setting up libncurses5-dev:amd64 (6.4-4) ...
#15 215.6 Setting up texlive-fonts-recommended (2022.20230122-3) ...
#15 215.7 Setting up python3-mccabe (0.7.0-1) ...
#15 215.8 Setting up libhwloc-dev:amd64 (2.9.0-1) ...
#15 215.9 Setting up tipa (2:1.3-21) ...
#15 216.0 Setting up python3-lazy-object-proxy (1.9.0-1+b1) ...
#15 216.1 Setting up libboost-graph-parallel1.74.0 (1.74.0+ds1-21) ...
#15 216.2 Setting up python3-tomlkit (0.11.7-1) ...
#15 216.3 Setting up python3-lib2to3 (3.11.2-3) ...
#15 216.4 Setting up libpmix-dev:amd64 (4.2.2-1+deb12u1) ...
#15 216.4 Setting up openmpi-bin (4.1.4-3+b1) ...
#15 216.5 update-alternatives: using /usr/bin/mpirun.openmpi to provide /usr/bin/mpirun (mpirun) in auto mode
#15 216.5 update-alternatives: warning: skip creation of /usr/share/man/man1/mpirun.1.gz because associated file /usr/share/man/man1/mpirun.openmpi.1.gz (of link group mpirun) doesn't exist
#15 216.5 update-alternatives: warning: skip creation of /usr/share/man/man1/mpiexec.1.gz because associated file /usr/share/man/man1/mpiexec.openmpi.1.gz (of link group mpirun) doesn't exist
#15 216.5 update-alternatives: using /usr/bin/mpicc.openmpi to provide /usr/bin/mpicc (mpi) in auto mode
#15 216.5 update-alternatives: warning: skip creation of /usr/share/man/man1/mpicc.1.gz because associated file /usr/share/man/man1/mpicc.openmpi.1.gz (of link group mpi) doesn't exist
#15 216.5 update-alternatives: warning: skip creation of /usr/share/man/man1/mpic++.1.gz because associated file /usr/share/man/man1/mpic++.openmpi.1.gz (of link group mpi) doesn't exist
#15 216.5 update-alternatives: warning: skip creation of /usr/share/man/man1/mpicxx.1.gz because associated file /usr/share/man/man1/mpicxx.openmpi.1.gz (of link group mpi) doesn't exist
#15 216.5 update-alternatives: warning: skip creation of /usr/share/man/man1/mpiCC.1.gz because associated file /usr/share/man/man1/mpiCC.openmpi.1.gz (of link group mpi) doesn't exist
#15 216.5 update-alternatives: warning: skip creation of /usr/share/man/man1/mpif77.1.gz because associated file /usr/share/man/man1/mpif77.openmpi.1.gz (of link group mpi) doesn't exist
#15 216.5 update-alternatives: warning: skip creation of /usr/share/man/man1/mpif90.1.gz because associated file /usr/share/man/man1/mpif90.openmpi.1.gz (of link group mpi) doesn't exist
#15 216.5 update-alternatives: warning: skip creation of /usr/share/man/man1/mpifort.1.gz because associated file /usr/share/man/man1/mpifort.openmpi.1.gz (of link group mpi) doesn't exist
#15 216.6 Setting up libpci-dev:amd64 (1:3.9.0-4) ...
#15 216.6 Setting up coccinelle (1.1.1.deb-2+b1) ...
#15 216.8 Setting up g++-12 (12.2.0-14) ...
#15 216.8 Setting up krb5-multidev:amd64 (1.20.1-2+deb12u2) ...
#15 216.9 Setting up libgs10:amd64 (10.0.0~dfsg-11+deb12u6) ...
#15 216.9 Setting up python3-pkg-resources (66.1.1-1+deb12u1) ...
#15 217.1 Setting up python3-distutils (3.11.2-3) ...
#15 217.2 Setting up python3-more-itertools (8.10.0-2) ...
#15 217.4 Setting up libglib2.0-dev-bin (2.74.6-2+deb12u5) ...
#15 217.5 Setting up libblkid-dev:amd64 (2.38.1-5+deb12u3) ...
#15 217.5 Setting up python3-filelock (3.9.0-1) ...
#15 217.7 Setting up liblua5.3-dev:amd64 (5.3.6-2) ...
#15 217.7 Setting up libboost1.74-dev:amd64 (1.74.0+ds1-21) ...
#15 217.8 Setting up python3-setuptools (66.1.1-1+deb12u1) ...
#15 218.1 Setting up libboost-container1.74-dev:amd64 (1.74.0+ds1-21) ...
#15 218.1 Setting up texlive (2022.20230122-3) ...
#15 218.2 Setting up python3-apt (2.6.0) ...
#15 218.3 Setting up libimport-into-perl (1.002005-2) ...
#15 218.4 Setting up python3-usb (1.2.1-2) ...
#15 218.5 Setting up python3-mypy-extensions (0.4.3-4) ...
#15 218.6 Setting up libmoo-perl (2.005005-1) ...
#15 218.7 Setting up libboost-chrono1.74-dev:amd64 (1.74.0+ds1-21) ...
#15 218.7 Setting up python3-pyflakes (2.5.0-1) ...
#15 218.9 Setting up texlive-science (2022.20230122-4) ...
#15 219.0 Setting up mpi-default-bin (1.14) ...
#15 219.0 Setting up libnorm-dev:amd64 (1.5.9+dfsg-2) ...
#15 219.1 Setting up python3-virtualenv (20.17.1+ds-1) ...
#15 219.2 Setting up latexmk (1:4.79-1) ...
#15 219.3 Setting up python3-yaml (6.0-3+b2) ...
#15 219.5 Setting up debhelper (13.11.4) ...
#15 219.5 Setting up texlive-latex-extra (2022.20230122-4) ...
#15 219.6 Setting up libboost-exception1.74-dev:amd64 (1.74.0+ds1-21) ...
#15 219.7 Setting up libboost-exception-dev:amd64 (1.74.0.3) ...
#15 219.7 Setting up python3-zipp (1.0.0-6) ...
#15 219.8 Setting up ghostscript (10.0.0~dfsg-11+deb12u6) ...
#15 219.9 Setting up python3-wheel (0.38.4-2) ...
#15 220.0 Setting up libboost-container-dev:amd64 (1.74.0.3) ...
#15 220.1 Setting up libboost-program-options1.74-dev:amd64 (1.74.0+ds1-21) ...
#15 220.1 Setting up texlive-bibtex-extra (2022.20230122-4) ...
#15 220.2 Setting up libkrb5-dev:amd64 (1.20.1-2+deb12u2) ...
#15 220.2 Setting up python3-pygments (2.14.0+dfsg-1) ...
#15 220.6 Setting up libboost-program-options-dev:amd64 (1.74.0.3) ...
#15 220.7 Setting up libpython3.11-dev:amd64 (3.11.2-6+deb12u5) ...
#15 220.7 Setting up libboost-system1.74-dev:amd64 (1.74.0+ds1-21) ...
#15 220.8 Setting up virtualenv (20.17.1+ds-1) ...
#15 220.8 Setting up libboost-random1.74-dev:amd64 (1.74.0+ds1-21) ...
#15 220.9 Setting up libboost-timer1.74-dev:amd64 (1.74.0+ds1-21) ...
#15 220.9 Setting up libelf-dev:amd64 (0.188-2.1) ...
#15 221.0 Setting up python3-pip (23.0.1+dfsg-1) ...
#15 221.5 Setting up texinfo (6.8-6+b1) ...
#15 221.6 Running mktexlsr. This may take some time. ... done.
#15 221.8 Setting up cppcheck (2.10-2) ...
#15 221.9 Setting up libboost-serialization1.74-dev:amd64 (1.74.0+ds1-21) ...
#15 221.9 Setting up libboost-atomic1.74-dev:amd64 (1.74.0+ds1-21) ...
#15 222.0 Setting up equivs (2.3.1) ...
#15 222.0 Setting up libboost-atomic-dev:amd64 (1.74.0.3) ...
#15 222.1 Setting up g++ (4:12.2.0-3) ...
#15 222.1 update-alternatives: using /usr/bin/g++ to provide /usr/bin/c++ (c++) in auto mode
#15 222.1 Setting up libboost-regex1.74-dev:amd64 (1.74.0+ds1-21) ...
#15 222.2 Setting up python3-astroid (2.14.2-1) ...
#15 222.4 Setting up libsnmp-dev (5.9.3+dfsg-2) ...
#15 222.9 Setting up build-essential (12.9) ...
#15 222.9 Setting up libzmq3-dev:amd64 (4.3.4-6) ...
#15 223.0 Setting up texlive-xetex (2022.20230122-3) ...
#15 223.1 Setting up libboost-dev:amd64 (1.74.0.3) ...
#15 223.1 Setting up libboost-math1.74-dev:amd64 (1.74.0+ds1-21) ...
#15 223.2 Setting up libboost-filesystem1.74-dev:amd64 (1.74.0+ds1-21) ...
#15 223.2 Setting up libopenmpi-dev:amd64 (4.1.4-3+b1) ...
#15 223.3 update-alternatives: using /usr/lib/x86_64-linux-gnu/openmpi/include to provide /usr/include/x86_64-linux-gnu/mpi (mpi-x86_64-linux-gnu) in auto mode
#15 223.3 Setting up libboost-stacktrace1.74-dev:amd64 (1.74.0+ds1-21) ...
#15 223.4 Setting up libboost-test1.74-dev:amd64 (1.74.0+ds1-21) ...
#15 223.4 Setting up libboost-regex-dev:amd64 (1.74.0.3) ...
#15 223.5 Setting up libmount-dev:amd64 (2.38.1-5+deb12u3) ...
#15 223.5 Setting up libboost-timer-dev:amd64 (1.74.0.3) ...
#15 223.6 Setting up libboost-filesystem-dev:amd64 (1.74.0.3) ...
#15 223.6 Setting up python3-mako (1.2.4+ds-1) ...
#15 223.8 Setting up libboost-mpi-python1.74.0 (1.74.0+ds1-21) ...
#15 223.9 Setting up libpython3-dev:amd64 (3.11.2-1+b1) ...
#15 223.9 Setting up python3-importlib-metadata (4.12.0-1) ...
#15 224.1 Setting up libboost-wave1.74-dev:amd64 (1.74.0+ds1-21) ...
#15 224.1 Setting up python3-logilab-common (1.9.8-1) ...
#15 224.3 Setting up libboost-chrono-dev:amd64 (1.74.0.3) ...
#15 224.3 Setting up python3.11-dev (3.11.2-6+deb12u5) ...
#15 224.4 Setting up libboost-math-dev:amd64 (1.74.0.3) ...
#15 224.4 Setting up libboost-system-dev:amd64 (1.74.0.3) ...
#15 224.5 Setting up dahdi-source (1:2.11.1.0.20170917~dfsg-8.4) ...
#15 224.5 Setting up libboost-random-dev:amd64 (1.74.0.3) ...
#15 224.6 Setting up libboost-wave-dev:amd64 (1.74.0.3) ...
#15 224.6 Setting up libboost-test-dev:amd64 (1.74.0.3) ...
#15 224.7 Setting up libboost-iostreams1.74-dev:amd64 (1.74.0+ds1-21) ...
#15 224.7 Setting up libboost-date-time1.74-dev:amd64 (1.74.0+ds1-21) ...
#15 224.8 Setting up texlive-formats-extra (2022.20230122-4) ...
#15 224.9 Setting up libglib2.0-dev:amd64 (2.74.6-2+deb12u5) ...
#15 224.9 Setting up libboost-graph1.74-dev:amd64 (1.74.0+ds1-21) ...
#15 225.0 Setting up python3-dev (3.11.2-1+b1) ...
#15 225.0 Setting up libboost-serialization-dev:amd64 (1.74.0.3) ...
#15 225.1 Setting up libboost-date-time-dev:amd64 (1.74.0.3) ...
#15 225.1 Setting up libboost-graph-parallel1.74-dev (1.74.0+ds1-21) ...
#15 225.2 Setting up mpi-default-dev (1.14) ...
#15 225.3 Setting up libboost-stacktrace-dev:amd64 (1.74.0.3) ...
#15 225.3 Setting up libboost-thread1.74-dev:amd64 (1.74.0+ds1-21) ...
#15 225.4 Setting up pylint (2.16.2-2) ...
#15 225.6 Setting up libboost-thread-dev:amd64 (1.74.0.3) ...
#15 225.7 Setting up libsofia-sip-ua-glib-dev (1.12.11+20110422.1+1e14eea~dfsg-6) ...
#15 225.7 Setting up libboost-graph-dev:amd64 (1.74.0.3) ...
#15 225.8 Setting up libboost-log1.74-dev (1.74.0+ds1-21) ...
#15 225.8 Setting up libboost-mpi1.74-dev (1.74.0+ds1-21) ...
#15 225.9 Setting up libboost-mpi-python1.74-dev (1.74.0+ds1-21) ...
#15 225.9 Setting up libboost-iostreams-dev:amd64 (1.74.0.3) ...
#15 226.0 Setting up libboost-context1.74-dev:amd64 (1.74.0+ds1-21) ...
#15 226.0 Setting up libboost-python1.74-dev (1.74.0+ds1-21) ...
#15 226.1 Setting up libboost-python-dev (1.74.0.3) ...
#15 226.1 Setting up libboost-fiber1.74-dev:amd64 (1.74.0+ds1-21) ...
#15 226.2 Setting up libboost-mpi-python-dev (1.74.0.3) ...
#15 226.2 Setting up libboost-type-erasure1.74-dev:amd64 (1.74.0+ds1-21) ...
#15 226.3 Setting up libboost-mpi-dev (1.74.0.3) ...
#15 226.4 Setting up libboost-locale1.74-dev:amd64 (1.74.0+ds1-21) ...
#15 226.4 Setting up libboost-graph-parallel-dev (1.74.0.3) ...
#15 226.5 Setting up libboost-coroutine1.74-dev:amd64 (1.74.0+ds1-21) ...
#15 226.5 Setting up libboost-coroutine-dev:amd64 (1.74.0.3) ...
#15 226.6 Setting up libboost-log-dev (1.74.0.3) ...
#15 226.6 Setting up libboost-fiber-dev:amd64 (1.74.0.3) ...
#15 226.7 Setting up libboost-locale-dev:amd64 (1.74.0.3) ...
#15 226.7 Setting up libboost-context-dev:amd64 (1.74.0.3) ...
#15 226.8 Setting up libboost-type-erasure-dev:amd64 (1.74.0.3) ...
#15 226.8 Setting up libboost-all-dev (1.74.0.3) ...
#15 226.9 Setting up libdevmapper1.02.1:amd64 (2:1.02.185-2) ...
#15 226.9 Setting up dmsetup (2:1.02.185-2) ...
#15 227.0 Setting up libcryptsetup12:amd64 (2:2.6.1-4~deb12u2) ...
#15 227.1 Setting up libwww-perl (6.68-1) ...
#15 227.1 Setting up systemd (252.33-1~deb12u1) ...
#15 227.3 Created symlink /etc/systemd/system/getty.target.wants/getty@tty1.service → /lib/systemd/system/getty@.service.

#15 227.3 Created symlink /etc/systemd/system/multi-user.target.wants/remote-fs.target → /lib/systemd/system/remote-fs.target.

#15 227.3 Created symlink /etc/systemd/system/sysinit.target.wants/systemd-pstore.service → /lib/systemd/system/systemd-pstore.service.

#15 227.3 Initializing machine ID from D-Bus machine ID.

#15 227.4 Creating group 'systemd-journal' with GID 999.

#15 227.4 Creating group 'systemd-network' with GID 998.

#15 227.4 Creating user 'systemd-network' (systemd Network Management) with UID 998 and GID 998.

#15 227.5 Setting up devscripts (2.23.4+deb12u2) ...
#15 227.7 Setting up liblwp-protocol-https-perl (6.10-1) ...
#15 227.8 Processing triggers for libc-bin (2.36-9+deb12u9) ...
#15 227.9 Processing triggers for sgml-base (1.31) ...
#15 228.0 Setting up libdbus-1-dev:amd64 (1.14.10-1~deb12u1) ...
#15 228.1 Setting up docbook-xsl (1.79.2+dfsg-2) ...
#15 228.3 Setting up docutils-common (0.19+dfsg-6) ...
#15 228.5 Setting up sgml-data (2.0.11+nmu1) ...
#15 228.8 Setting up libpcap0.8-dev:amd64 (1.10.3-1) ...
#15 228.9 Setting up docbook5-xml (5.0-3) ...
#15 229.0 Setting up asciidoc-base (10.2.0-1) ...
#15 229.4 Setting up libpcap-dev:amd64 (1.10.3-1) ...
#15 229.5 Setting up asciidoc (10.2.0-1) ...
#15 229.7 Processing triggers for sgml-base (1.31) ...
#15 229.8 Setting up docbook (4.5-10) ...
#15 230.0 Setting up python3-docutils (0.19+dfsg-6) ...
#15 230.3 Setting up docbook-xml (4.5-12) ...
#15 231.3 Setting up python3-blockdiag (2.0.1+dfsg-1) ...
#15 231.5 Setting up python3-nwdiag (2.0.0+dfsg-1.1) ...
#15 231.7 Processing triggers for sgml-base (1.31) ...
#15 231.7 Setting up dblatex (0.3.12py3-2) ...
#15 231.9 Setting up docbook-dsssl (1.79-10) ...
#15 232.0 Processing triggers for sgml-base (1.31) ...
#15 232.1 Setting up docbook-utils (0.6.14-4) ...
#15 232.1 Setting up asciidoc-dblatex (10.2.0-1) ...
#15 232.3 Processing triggers for dbus (1.14.10-1~deb12u1) ...
#15 232.3 Processing triggers for tex-common (6.18) ...
#15 232.4 debconf: unable to initialize frontend: Dialog
#15 232.4 debconf: (TERM is not set, so the dialog frontend is not usable.)
#15 232.4 debconf: falling back to frontend: Readline
#15 232.4 debconf: unable to initialize frontend: Readline
#15 232.4 debconf: (This frontend requires a controlling tty.)
#15 232.4 debconf: falling back to frontend: Teletype
#15 232.4 Running updmap-sys. This may take some time... done.
#15 232.8 Running mktexlsr /var/lib/texmf ... done.
#15 232.9 Building format(s) --all.
#15 232.9 	This may take some time... done.
#15 265.0 + apt-get clean
#15 DONE 265.3s

#16 [ 7/16] ADD	HTTPS://GITEA.OSMOCOM.ORG/SIM-CARD/PYSIM/RAW/BRANCH/MASTER/REQUIREMENTS.TXT /tmp/pysim_requirements.txt
#16 DONE 0.2s

#17 [ 8/16] RUN	SET -x && 	cat /tmp/pysim_requirements.txt && 	pip3 install --break-system-packages 		'git+https://github.com/eriwen/lcov-to-cobertura-xml.git' 		'git+https://github.com/osmocom/sphinx-argparse@inside-classes#egg=sphinx-argparse' 		'git+https://github.com/podshumok/python-smpplib.git' 		'pydbus' 		'pysispm' 		'sphinx' 		'sphinxcontrib-napoleon' 		-r /tmp/pysim_requirements.txt
#17 0.358 + cat /tmp/pysim_requirements.txt
#17 0.358 pyscard
#17 0.358 pyserial
#17 0.358 pytlv
#17 0.358 cmd2>=1.5
#17 0.358 jsonpath-ng
#17 0.358 construct>=2.10.70
#17 0.358 bidict
#17 0.358 pyosmocom>=0.0.6
#17 0.358 pyyaml>=5.1
#17 0.358 termcolor
#17 0.358 colorlog
#17 0.358 pycryptodomex
#17 0.358 cryptography
#17 0.358 git+https://github.com/osmocom/asn1tools
#17 0.358 packaging
#17 0.358 git+https://github.com/hologram-io/smpp.pdu
#17 0.358 + pip3 install --break-system-packages git+https://github.com/eriwen/lcov-to-cobertura-xml.git git+https://github.com/osmocom/sphinx-argparse@inside-classes#egg=sphinx-argparse git+https://github.com/podshumok/python-smpplib.git pydbus pysispm sphinx sphinxcontrib-napoleon -r /tmp/pysim_requirements.txt
#17 0.544 Collecting git+https://github.com/eriwen/lcov-to-cobertura-xml.git
#17 0.544   Cloning https://github.com/eriwen/lcov-to-cobertura-xml.git to /tmp/pip-req-build-jjlro0q1
#17 0.545   Running command git clone --filter=blob:none --quiet https://github.com/eriwen/lcov-to-cobertura-xml.git /tmp/pip-req-build-jjlro0q1
#17 1.444   Resolved https://github.com/eriwen/lcov-to-cobertura-xml.git to commit 028da3798355d0260c6c6491b39347d84ca7a02d
#17 1.446   Installing build dependencies: started
#17 2.469   Installing build dependencies: finished with status 'done'
#17 2.470   Getting requirements to build wheel: started
#17 2.561   Getting requirements to build wheel: finished with status 'done'
#17 2.562   Preparing metadata (pyproject.toml): started
#17 2.650   Preparing metadata (pyproject.toml): finished with status 'done'
#17 2.654 Collecting sphinx-argparse
#17 2.654   Cloning https://github.com/osmocom/sphinx-argparse (to revision inside-classes) to /tmp/pip-install-e5_bvhvj/sphinx-argparse_51dc448d4127401f8b50617e393f34a5
#17 2.655   Running command git clone --filter=blob:none --quiet https://github.com/osmocom/sphinx-argparse /tmp/pip-install-e5_bvhvj/sphinx-argparse_51dc448d4127401f8b50617e393f34a5
#17 3.478   Running command git checkout -b inside-classes --track origin/inside-classes
#17 3.808   Switched to a new branch 'inside-classes'
#17 3.808   branch 'inside-classes' set up to track 'origin/inside-classes'.
#17 3.808   Resolved https://github.com/osmocom/sphinx-argparse to commit a0cafcdde29d6d91ed94eb34e689a28d8612686a
#17 3.819   Installing build dependencies: started
#17 4.252   Installing build dependencies: finished with status 'done'
#17 4.252   Getting requirements to build wheel: started
#17 4.291   Getting requirements to build wheel: finished with status 'done'
#17 4.291   Preparing metadata (pyproject.toml): started
#17 4.330   Preparing metadata (pyproject.toml): finished with status 'done'
#17 4.333 Collecting git+https://github.com/podshumok/python-smpplib.git
#17 4.333   Cloning https://github.com/podshumok/python-smpplib.git to /tmp/pip-req-build-zzvxzt82
#17 4.334   Running command git clone --filter=blob:none --quiet https://github.com/podshumok/python-smpplib.git /tmp/pip-req-build-zzvxzt82
#17 5.314   Resolved https://github.com/podshumok/python-smpplib.git to commit 29e611d20b21c4c6aff55ee867f2355f4c7085c8
#17 5.319   Preparing metadata (setup.py): started
#17 5.447   Preparing metadata (setup.py): finished with status 'done'
#17 5.450 Collecting git+https://github.com/osmocom/asn1tools (from -r /tmp/pysim_requirements.txt (line 14))
#17 5.451   Cloning https://github.com/osmocom/asn1tools to /tmp/pip-req-build-vm8xge5y
#17 5.452   Running command git clone --filter=blob:none --quiet https://github.com/osmocom/asn1tools /tmp/pip-req-build-vm8xge5y
#17 6.660   Resolved https://github.com/osmocom/asn1tools to commit 44277cdb34959196f317b6a02af20a4a1c3c4e2d
#17 6.661   Preparing metadata (setup.py): started
#17 6.783   Preparing metadata (setup.py): finished with status 'done'
#17 6.786 Collecting git+https://github.com/hologram-io/smpp.pdu (from -r /tmp/pysim_requirements.txt (line 16))
#17 6.786   Cloning https://github.com/hologram-io/smpp.pdu to /tmp/pip-req-build-uze3u7pz
#17 6.787   Running command git clone --filter=blob:none --quiet https://github.com/hologram-io/smpp.pdu /tmp/pip-req-build-uze3u7pz
#17 7.597   Resolved https://github.com/hologram-io/smpp.pdu to commit 20acc840ded958898eeb35ae9a18df9b29bdaaac
#17 7.602   Preparing metadata (setup.py): started
#17 7.728   Preparing metadata (setup.py): finished with status 'done'
#17 7.792 Collecting pydbus
#17 7.826   Downloading pydbus-0.6.0-py2.py3-none-any.whl (19 kB)
#17 7.950 Collecting pysispm
#17 7.958   Downloading pysispm-0.6-py3-none-any.whl (4.3 kB)
#17 8.038 Collecting sphinx
#17 8.045   Downloading sphinx-8.1.3-py3-none-any.whl (3.5 MB)
#17 8.113      ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 3.5/3.5 MB 53.2 MB/s eta 0:00:00
#17 8.149 Collecting sphinxcontrib-napoleon
#17 8.157   Downloading sphinxcontrib_napoleon-0.7-py2.py3-none-any.whl (17 kB)
#17 8.242 Collecting pyscard
#17 8.250   Downloading pyscard-2.2.1.tar.gz (156 kB)
#17 8.261      ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 156.5/156.5 kB 16.0 MB/s eta 0:00:00
#17 8.280   Installing build dependencies: started
#17 9.398   Installing build dependencies: finished with status 'done'
#17 9.399   Getting requirements to build wheel: started
#17 9.490   Getting requirements to build wheel: finished with status 'done'
#17 9.490   Preparing metadata (pyproject.toml): started
#17 9.579   Preparing metadata (pyproject.toml): finished with status 'done'
#17 9.602 Collecting pyserial
#17 9.609   Downloading pyserial-3.5-py2.py3-none-any.whl (90 kB)
#17 9.623      ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 90.6/90.6 kB 7.9 MB/s eta 0:00:00
#17 9.749 Collecting pytlv
#17 9.760   Downloading pytlv-0.71.tar.gz (15 kB)
#17 9.779   Preparing metadata (setup.py): started
#17 9.894   Preparing metadata (setup.py): finished with status 'done'
#17 9.943 Collecting cmd2>=1.5
#17 9.953   Downloading cmd2-2.5.9-py3-none-any.whl (152 kB)
#17 9.963      ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 152.7/152.7 kB 15.7 MB/s eta 0:00:00
#17 9.991 Collecting jsonpath-ng
#17 9.998   Downloading jsonpath_ng-1.7.0-py3-none-any.whl (30 kB)
#17 10.04 Collecting construct>=2.10.70
#17 10.05   Downloading construct-2.10.70-py3-none-any.whl (63 kB)
#17 10.07      ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 63.0/63.0 kB 3.0 MB/s eta 0:00:00
#17 10.11 Collecting bidict
#17 10.12   Downloading bidict-0.23.1-py3-none-any.whl (32 kB)
#17 10.25 Collecting pyosmocom>=0.0.6
#17 10.26   Downloading pyosmocom-0.0.8-py3-none-any.whl (39 kB)
#17 10.28 Requirement already satisfied: pyyaml>=5.1 in /usr/lib/python3/dist-packages (from -r /tmp/pysim_requirements.txt (line 9)) (6.0)
#17 10.31 Collecting termcolor
#17 10.32   Downloading termcolor-2.5.0-py3-none-any.whl (7.8 kB)
#17 10.37 Collecting colorlog
#17 10.38   Downloading colorlog-6.9.0-py3-none-any.whl (11 kB)
#17 10.49 Collecting pycryptodomex
#17 10.50   Downloading pycryptodomex-3.21.0-cp36-abi3-manylinux_2_17_x86_64.manylinux2014_x86_64.whl (2.3 MB)
#17 10.53      ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 2.3/2.3 MB 69.8 MB/s eta 0:00:00
#17 10.71 Collecting cryptography
#17 10.72   Downloading cryptography-44.0.0-cp39-abi3-manylinux_2_28_x86_64.whl (4.2 MB)
#17 10.77      ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 4.2/4.2 MB 72.6 MB/s eta 0:00:00
#17 10.81 Collecting packaging
#17 10.82   Downloading packaging-24.2-py3-none-any.whl (65 kB)
#17 10.83      ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 65.5/65.5 kB 6.4 MB/s eta 0:00:00
#17 10.86 Requirement already satisfied: docutils>=0.19 in /usr/lib/python3/dist-packages (from sphinx-argparse) (0.19)
#17 10.86 Requirement already satisfied: six in /usr/lib/python3/dist-packages (from smpplib==2.1.0) (1.16.0)
#17 10.86 Requirement already satisfied: pyusb>=1.0.0a in /usr/lib/python3/dist-packages (from pysispm) (1.2.1.post2)
#17 10.89 Collecting sphinxcontrib-applehelp>=1.0.7
#17 10.90   Downloading sphinxcontrib_applehelp-2.0.0-py3-none-any.whl (119 kB)
#17 10.91      ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 119.3/119.3 kB 12.1 MB/s eta 0:00:00
#17 10.95 Collecting sphinxcontrib-devhelp>=1.0.6
#17 10.96   Downloading sphinxcontrib_devhelp-2.0.0-py3-none-any.whl (82 kB)
#17 10.97      ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 82.5/82.5 kB 7.4 MB/s eta 0:00:00
#17 11.01 Collecting sphinxcontrib-htmlhelp>=2.0.6
#17 11.01   Downloading sphinxcontrib_htmlhelp-2.1.0-py3-none-any.whl (98 kB)
#17 11.03      ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 98.7/98.7 kB 9.0 MB/s eta 0:00:00
#17 11.06 Collecting sphinxcontrib-jsmath>=1.0.1
#17 11.07   Downloading sphinxcontrib_jsmath-1.0.1-py2.py3-none-any.whl (5.1 kB)
#17 11.12 Collecting sphinxcontrib-qthelp>=1.0.6
#17 11.12   Downloading sphinxcontrib_qthelp-2.0.0-py3-none-any.whl (88 kB)
#17 11.14      ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 88.7/88.7 kB 8.2 MB/s eta 0:00:00
#17 11.17 Collecting sphinxcontrib-serializinghtml>=1.1.9
#17 11.18   Downloading sphinxcontrib_serializinghtml-2.0.0-py3-none-any.whl (92 kB)
#17 11.19      ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 92.1/92.1 kB 8.5 MB/s eta 0:00:00
#17 11.23 Collecting Jinja2>=3.1
#17 11.23   Downloading jinja2-3.1.5-py3-none-any.whl (134 kB)
#17 11.24      ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 134.6/134.6 kB 13.8 MB/s eta 0:00:00
#17 11.28 Collecting Pygments>=2.17
#17 11.29   Downloading pygments-2.19.1-py3-none-any.whl (1.2 MB)
#17 11.31      ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 1.2/1.2 MB 60.4 MB/s eta 0:00:00
#17 11.34 Collecting docutils>=0.19
#17 11.35   Downloading docutils-0.21.2-py3-none-any.whl (587 kB)
#17 11.37      ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 587.4/587.4 kB 38.6 MB/s eta 0:00:00
#17 11.40 Collecting snowballstemmer>=2.2
#17 11.40   Downloading snowballstemmer-2.2.0-py2.py3-none-any.whl (93 kB)
#17 11.42      ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 93.0/93.0 kB 8.3 MB/s eta 0:00:00
#17 11.44 Collecting babel>=2.13
#17 11.45   Downloading babel-2.16.0-py3-none-any.whl (9.6 MB)
#17 11.56      ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 9.6/9.6 MB 85.1 MB/s eta 0:00:00
#17 11.59 Collecting alabaster>=0.7.14
#17 11.60   Downloading alabaster-1.0.0-py3-none-any.whl (13 kB)
#17 11.63 Collecting imagesize>=1.3
#17 11.64   Downloading imagesize-1.4.1-py2.py3-none-any.whl (8.8 kB)
#17 11.68 Collecting requests>=2.30.0
#17 11.69   Downloading requests-2.32.3-py3-none-any.whl (64 kB)
#17 11.70      ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 64.9/64.9 kB 6.2 MB/s eta 0:00:00
#17 11.72 Collecting pockets>=0.3
#17 11.73   Downloading pockets-0.9.1-py2.py3-none-any.whl (26 kB)
#17 11.77 Collecting pyperclip>=1.8
#17 11.78   Downloading pyperclip-1.9.0.tar.gz (20 kB)
#17 11.79   Preparing metadata (setup.py): started
#17 11.90   Preparing metadata (setup.py): finished with status 'done'
#17 11.92 Collecting wcwidth>=0.2.10
#17 11.93   Downloading wcwidth-0.2.13-py2.py3-none-any.whl (34 kB)
#17 11.96 Collecting ply
#17 11.97   Downloading ply-3.11-py2.py3-none-any.whl (49 kB)
#17 11.98      ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 49.6/49.6 kB 4.5 MB/s eta 0:00:00
#17 12.13 Collecting gsm0338
#17 12.14   Downloading gsm0338-1.0.0-py2.py3-none-any.whl (9.7 kB)
#17 12.29 Collecting cffi>=1.12
#17 12.31   Downloading cffi-1.17.1-cp311-cp311-manylinux_2_17_x86_64.manylinux2014_x86_64.whl (467 kB)
#17 12.32      ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 467.2/467.2 kB 37.6 MB/s eta 0:00:00
#17 12.36 Collecting bitstruct
#17 12.37   Downloading bitstruct-8.19.0-cp311-cp311-manylinux_2_17_x86_64.manylinux2014_x86_64.whl (82 kB)
#17 12.38      ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 82.9/82.9 kB 8.2 MB/s eta 0:00:00
#17 12.42 Collecting pyparsing>=3.0.6
#17 12.42   Downloading pyparsing-3.2.1-py3-none-any.whl (107 kB)
#17 12.43      ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 107.7/107.7 kB 10.6 MB/s eta 0:00:00
#17 12.47 Collecting pycparser
#17 12.48   Downloading pycparser-2.22-py3-none-any.whl (117 kB)
#17 12.49      ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 117.6/117.6 kB 11.6 MB/s eta 0:00:00
#17 12.50 Requirement already satisfied: MarkupSafe>=2.0 in /usr/lib/python3/dist-packages (from Jinja2>=3.1->sphinx) (2.1.2)
#17 12.60 Collecting charset-normalizer<4,>=2
#17 12.61   Downloading charset_normalizer-3.4.1-cp311-cp311-manylinux_2_17_x86_64.manylinux2014_x86_64.whl (143 kB)
#17 12.62      ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 143.9/143.9 kB 14.2 MB/s eta 0:00:00
#17 12.65 Collecting idna<4,>=2.5
#17 12.65   Downloading idna-3.10-py3-none-any.whl (70 kB)
#17 12.66      ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 70.4/70.4 kB 6.5 MB/s eta 0:00:00
#17 12.71 Collecting urllib3<3,>=1.21.1
#17 12.72   Downloading urllib3-2.3.0-py3-none-any.whl (128 kB)
#17 12.73      ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 128.4/128.4 kB 12.7 MB/s eta 0:00:00
#17 12.76 Collecting certifi>=2017.4.17
#17 12.77   Downloading certifi-2024.12.14-py3-none-any.whl (164 kB)
#17 12.78      ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 164.9/164.9 kB 16.3 MB/s eta 0:00:00
#17 12.83 Building wheels for collected packages: lcov_cobertura, sphinx-argparse, smpplib, pyscard, pytlv, asn1tools, smpp.pdu, pyperclip
#17 12.83   Building wheel for lcov_cobertura (pyproject.toml): started
#17 12.93   Building wheel for lcov_cobertura (pyproject.toml): finished with status 'done'
#17 12.93   Created wheel for lcov_cobertura: filename=lcov_cobertura-2.0.2-py3-none-any.whl size=11686 sha256=84d37b3828831078f856c7b185dab986745eb78d02008e9525742a6da50862d2
#17 12.93   Stored in directory: /tmp/pip-ephem-wheel-cache-16n3usne/wheels/3f/9d/2e/bcc423926effdef07f9714077dd6071e34811fc58066b3d7fc
#17 12.93   Building wheel for sphinx-argparse (pyproject.toml): started
#17 12.97   Building wheel for sphinx-argparse (pyproject.toml): finished with status 'done'
#17 12.97   Created wheel for sphinx-argparse: filename=sphinx_argparse-0.5.2-py3-none-any.whl size=12643 sha256=9e5d98827b11ae048fc58fb6a3fe7f1356b8222cc1c5ffa4a12cf18137188437
#17 12.97   Stored in directory: /tmp/pip-ephem-wheel-cache-16n3usne/wheels/89/b3/a2/d1946ce985aa1052449817c32ebdd1d784a4e65d648f46bfcb
#17 12.97   Building wheel for smpplib (setup.py): started
#17 13.12   Building wheel for smpplib (setup.py): finished with status 'done'
#17 13.12   Created wheel for smpplib: filename=smpplib-2.1.0-py3-none-any.whl size=28937 sha256=e168b877b6eaeeb396339b614e61bb339c59e5dd3ea64ec1290efe32d8b3012e
#17 13.12   Stored in directory: /tmp/pip-ephem-wheel-cache-16n3usne/wheels/d1/21/5f/83bc7dafba8cb5c323f61bf300449d47de4133538a4860d8c1
#17 13.12   Building wheel for pyscard (pyproject.toml): started
#17 14.05   Building wheel for pyscard (pyproject.toml): finished with status 'done'
#17 14.05   Created wheel for pyscard: filename=pyscard-2.2.1-cp311-cp311-linux_x86_64.whl size=231746 sha256=f3106cbfcadfd1e145f24fe559b76080756e005aac4288cb56e690164be67083
#17 14.05   Stored in directory: /root/.cache/pip/wheels/6c/22/1b/d9f2851969b54b9c7ae2779fd0d950809c49df116decc6e6b8
#17 14.06   Building wheel for pytlv (setup.py): started
#17 14.20   Building wheel for pytlv (setup.py): finished with status 'done'
#17 14.20   Created wheel for pytlv: filename=pytlv-0.71-py2.py3-none-any.whl size=16528 sha256=7f0022b97c73ca6b3a4e6eb89d78b2ecf11d61dbf78d5ff33dbd101331ccdfdb
#17 14.20   Stored in directory: /root/.cache/pip/wheels/f2/0f/73/bd91ad25e655c44dce9047f187557a961707074344b2211c15
#17 14.20   Building wheel for asn1tools (setup.py): started
#17 14.37   Building wheel for asn1tools (setup.py): finished with status 'done'
#17 14.37   Created wheel for asn1tools: filename=asn1tools-0.166.0-py3-none-any.whl size=119699 sha256=32ab60e47ad193ae35fa0eaad1c442e85383f50086b0bc0f5b74aa10fd896d15
#17 14.37   Stored in directory: /tmp/pip-ephem-wheel-cache-16n3usne/wheels/2a/6a/86/4ace26b2e8568f96ceac6272ea7db506da59e1b3c2fc4c8699
#17 14.37   Building wheel for smpp.pdu (setup.py): started
#17 14.53   Building wheel for smpp.pdu (setup.py): finished with status 'done'
#17 14.53   Created wheel for smpp.pdu: filename=smpp.pdu-0.3-py3-none-any.whl size=31683 sha256=5785c31e992b583bfd0b1e76bda33b4caa69902cffdd7bcc727135d63268e1f8
#17 14.53   Stored in directory: /tmp/pip-ephem-wheel-cache-16n3usne/wheels/32/96/03/ef03cb1f288aec2fb1552d40911360548b181fe570b8fc2432
#17 14.53   Building wheel for pyperclip (setup.py): started
#17 14.67   Building wheel for pyperclip (setup.py): finished with status 'done'
#17 14.67   Created wheel for pyperclip: filename=pyperclip-1.9.0-py3-none-any.whl size=11005 sha256=7b98a03eb0a84b9a803facb16bbd0b283825e25bee15cdf308938fc95fbe04a8
#17 14.67   Stored in directory: /root/.cache/pip/wheels/e8/e7/56/591cb88ba1783b38c40d584026e766aac9c3a048e34128ce8b
#17 14.67 Successfully built lcov_cobertura sphinx-argparse smpplib pyscard pytlv asn1tools smpp.pdu pyperclip
#17 14.82 Installing collected packages: wcwidth, snowballstemmer, smpp.pdu, pytlv, pyserial, pyperclip, pydbus, ply, urllib3, termcolor, sphinxcontrib-serializinghtml, sphinxcontrib-qthelp, sphinxcontrib-jsmath, sphinxcontrib-htmlhelp, sphinxcontrib-devhelp, sphinxcontrib-applehelp, smpplib, pysispm, pyscard, pyparsing, Pygments, pycryptodomex, pycparser, pockets, packaging, lcov_cobertura, jsonpath-ng, Jinja2, imagesize, idna, gsm0338, docutils, construct, colorlog, cmd2, charset-normalizer, certifi, bitstruct, bidict, babel, alabaster, sphinxcontrib-napoleon, requests, pyosmocom, cffi, asn1tools, sphinx, cryptography, sphinx-argparse
#17 15.57   Attempting uninstall: Pygments
#17 15.58     Found existing installation: Pygments 2.14.0
#17 15.58     Not uninstalling pygments at /usr/lib/python3/dist-packages, outside environment /usr
#17 15.58     Can't uninstall 'Pygments'. No files were found to uninstall.
#17 16.47   Attempting uninstall: docutils
#17 16.48     Found existing installation: docutils 0.19
#17 16.48     Not uninstalling docutils at /usr/lib/python3/dist-packages, outside environment /usr
#17 16.49     Can't uninstall 'docutils'. No files were found to uninstall.
#17 17.94 Successfully installed Jinja2-3.1.5 Pygments-2.19.1 alabaster-1.0.0 asn1tools-0.166.0 babel-2.16.0 bidict-0.23.1 bitstruct-8.19.0 certifi-2024.12.14 cffi-1.17.1 charset-normalizer-3.4.1 cmd2-2.5.9 colorlog-6.9.0 construct-2.10.70 cryptography-44.0.0 docutils-0.21.2 gsm0338-1.0.0 idna-3.10 imagesize-1.4.1 jsonpath-ng-1.7.0 lcov_cobertura-2.0.2 packaging-24.2 ply-3.11 pockets-0.9.1 pycparser-2.22 pycryptodomex-3.21.0 pydbus-0.6.0 pyosmocom-0.0.8 pyparsing-3.2.1 pyperclip-1.9.0 pyscard-2.2.1 pyserial-3.5 pysispm-0.6 pytlv-0.71 requests-2.32.3 smpp.pdu-0.3 smpplib-2.1.0 snowballstemmer-2.2.0 sphinx-8.1.3 sphinx-argparse-0.5.2 sphinxcontrib-applehelp-2.0.0 sphinxcontrib-devhelp-2.0.0 sphinxcontrib-htmlhelp-2.1.0 sphinxcontrib-jsmath-1.0.1 sphinxcontrib-napoleon-0.7 sphinxcontrib-qthelp-2.0.0 sphinxcontrib-serializinghtml-2.0.0 termcolor-2.5.0 urllib3-2.3.0 wcwidth-0.2.13
#17 17.94 WARNING: Running pip as the 'root' user can result in broken permissions and conflicting behaviour with the system package manager. It is recommended to use a virtual environment instead: https://pip.pypa.io/warnings/venv
#17 DONE 18.3s

#18 [ 9/16] ADD	HTTPS://GERRIT.OSMOCOM.ORG/PLUGINS/GITILES/PYTHON/OSMO-PYTHON-TESTS/+/MASTER?FORMAT=TEXT /tmp/osmo-python-tests-commit
#18 DONE 0.2s

#19 [10/16] RUN	SET -x && 	git clone --depth=1 https://gerrit.osmocom.org/python/osmo-python-tests osmo-python-tests && 	cd osmo-python-tests && 	python3 setup.py clean build install && 	cd .. && 	rm -rf osmo-python-tests
#19 0.360 + git clone --depth=1 https://gerrit.osmocom.org/python/osmo-python-tests osmo-python-tests
#19 0.360 Cloning into 'osmo-python-tests'...
#19 0.443 + cd osmo-python-tests
#19 0.443 + python3 setup.py clean build install
#19 0.557 running clean
#19 0.559 running build
#19 0.559 running build_py
#19 0.561 creating build
#19 0.561 creating build/lib
#19 0.561 creating build/lib/osmopy
#19 0.561 copying osmopy/twisted_ipa.py -> build/lib/osmopy
#19 0.561 copying osmopy/__init__.py -> build/lib/osmopy
#19 0.561 copying osmopy/osmo_ipa.py -> build/lib/osmopy
#19 0.561 copying osmopy/trap_helper.py -> build/lib/osmopy
#19 0.561 copying osmopy/osmoutil.py -> build/lib/osmopy
#19 0.561 copying osmopy/obscvty.py -> build/lib/osmopy
#19 0.561 creating build/lib/osmopy/osmo_interact
#19 0.561 copying osmopy/osmo_interact/__init__.py -> build/lib/osmopy/osmo_interact
#19 0.561 copying osmopy/osmo_interact/vty.py -> build/lib/osmopy/osmo_interact
#19 0.561 copying osmopy/osmo_interact/common.py -> build/lib/osmopy/osmo_interact
#19 0.561 copying osmopy/osmo_interact/ctrl.py -> build/lib/osmopy/osmo_interact
#19 0.562 running build_scripts
#19 0.564 creating build/scripts-3.11
#19 0.564 copying and adjusting scripts/osmodumpdoc.py -> build/scripts-3.11
#19 0.564 copying and adjusting scripts/osmotestvty.py -> build/scripts-3.11
#19 0.564 copying and adjusting scripts/osmotestconfig.py -> build/scripts-3.11
#19 0.564 copying and adjusting scripts/osmo_ctrl.py -> build/scripts-3.11
#19 0.564 copying and adjusting scripts/osmo_rate_ctr2csv.py -> build/scripts-3.11
#19 0.564 copying and adjusting scripts/osmo_trap2cgi.py -> build/scripts-3.11
#19 0.564 copying and adjusting scripts/osmo_interact_vty.py -> build/scripts-3.11
#19 0.564 copying and adjusting scripts/osmo_interact_ctrl.py -> build/scripts-3.11
#19 0.564 copying and adjusting scripts/osmo_verify_transcript_vty.py -> build/scripts-3.11
#19 0.564 copying and adjusting scripts/osmo_verify_transcript_ctrl.py -> build/scripts-3.11
#19 0.564 changing mode of build/scripts-3.11/osmodumpdoc.py from 644 to 755
#19 0.564 changing mode of build/scripts-3.11/osmotestvty.py from 644 to 755
#19 0.564 changing mode of build/scripts-3.11/osmotestconfig.py from 644 to 755
#19 0.564 changing mode of build/scripts-3.11/osmo_ctrl.py from 644 to 755
#19 0.564 changing mode of build/scripts-3.11/osmo_rate_ctr2csv.py from 644 to 755
#19 0.564 changing mode of build/scripts-3.11/osmo_trap2cgi.py from 644 to 755
#19 0.564 changing mode of build/scripts-3.11/osmo_interact_vty.py from 644 to 755
#19 0.565 changing mode of build/scripts-3.11/osmo_interact_ctrl.py from 644 to 755
#19 0.565 changing mode of build/scripts-3.11/osmo_verify_transcript_vty.py from 644 to 755
#19 0.565 changing mode of build/scripts-3.11/osmo_verify_transcript_ctrl.py from 644 to 755
#19 0.565 running install
#19 0.565 /usr/lib/python3/dist-packages/setuptools/command/install.py:34: SetuptoolsDeprecationWarning: setup.py install is deprecated. Use build and pip and other standards-based tools.
#19 0.565   warnings.warn(
#19 0.584 /usr/lib/python3/dist-packages/setuptools/command/easy_install.py:146: EasyInstallDeprecationWarning: easy_install command is deprecated. Use build and pip and other standards-based tools.
#19 0.584   warnings.warn(
#19 0.604 running bdist_egg
#19 0.608 running egg_info
#19 0.608 creating osmopython.egg-info
#19 0.610 writing osmopython.egg-info/PKG-INFO
#19 0.610 writing dependency_links to osmopython.egg-info/dependency_links.txt
#19 0.610 writing top-level names to osmopython.egg-info/top_level.txt
#19 0.610 writing manifest file 'osmopython.egg-info/SOURCES.txt'
#19 0.612 reading manifest file 'osmopython.egg-info/SOURCES.txt'
#19 0.612 writing manifest file 'osmopython.egg-info/SOURCES.txt'
#19 0.626 installing library code to build/bdist.linux-x86_64/egg
#19 0.626 running install_lib
#19 0.626 creating build/bdist.linux-x86_64
#19 0.626 creating build/bdist.linux-x86_64/egg
#19 0.626 creating build/bdist.linux-x86_64/egg/osmopy
#19 0.626 copying build/lib/osmopy/twisted_ipa.py -> build/bdist.linux-x86_64/egg/osmopy
#19 0.626 copying build/lib/osmopy/__init__.py -> build/bdist.linux-x86_64/egg/osmopy
#19 0.626 copying build/lib/osmopy/osmo_ipa.py -> build/bdist.linux-x86_64/egg/osmopy
#19 0.626 creating build/bdist.linux-x86_64/egg/osmopy/osmo_interact
#19 0.626 copying build/lib/osmopy/osmo_interact/__init__.py -> build/bdist.linux-x86_64/egg/osmopy/osmo_interact
#19 0.626 copying build/lib/osmopy/osmo_interact/vty.py -> build/bdist.linux-x86_64/egg/osmopy/osmo_interact
#19 0.626 copying build/lib/osmopy/osmo_interact/common.py -> build/bdist.linux-x86_64/egg/osmopy/osmo_interact
#19 0.626 copying build/lib/osmopy/osmo_interact/ctrl.py -> build/bdist.linux-x86_64/egg/osmopy/osmo_interact
#19 0.627 copying build/lib/osmopy/trap_helper.py -> build/bdist.linux-x86_64/egg/osmopy
#19 0.627 copying build/lib/osmopy/osmoutil.py -> build/bdist.linux-x86_64/egg/osmopy
#19 0.627 copying build/lib/osmopy/obscvty.py -> build/bdist.linux-x86_64/egg/osmopy
#19 0.627 byte-compiling build/bdist.linux-x86_64/egg/osmopy/twisted_ipa.py to twisted_ipa.cpython-311.pyc
#19 0.628 byte-compiling build/bdist.linux-x86_64/egg/osmopy/__init__.py to __init__.cpython-311.pyc
#19 0.628 byte-compiling build/bdist.linux-x86_64/egg/osmopy/osmo_ipa.py to osmo_ipa.cpython-311.pyc
#19 0.629 byte-compiling build/bdist.linux-x86_64/egg/osmopy/osmo_interact/__init__.py to __init__.cpython-311.pyc
#19 0.630 byte-compiling build/bdist.linux-x86_64/egg/osmopy/osmo_interact/vty.py to vty.cpython-311.pyc
#19 0.630 byte-compiling build/bdist.linux-x86_64/egg/osmopy/osmo_interact/common.py to common.cpython-311.pyc
#19 0.632 byte-compiling build/bdist.linux-x86_64/egg/osmopy/osmo_interact/ctrl.py to ctrl.cpython-311.pyc
#19 0.632 byte-compiling build/bdist.linux-x86_64/egg/osmopy/trap_helper.py to trap_helper.cpython-311.pyc
#19 0.633 byte-compiling build/bdist.linux-x86_64/egg/osmopy/osmoutil.py to osmoutil.cpython-311.pyc
#19 0.633 byte-compiling build/bdist.linux-x86_64/egg/osmopy/obscvty.py to obscvty.cpython-311.pyc
#19 0.634 creating build/bdist.linux-x86_64/egg/EGG-INFO
#19 0.634 installing scripts to build/bdist.linux-x86_64/egg/EGG-INFO/scripts
#19 0.634 running install_scripts
#19 0.634 creating build/bdist.linux-x86_64/egg/EGG-INFO/scripts
#19 0.634 copying build/scripts-3.11/osmo_rate_ctr2csv.py -> build/bdist.linux-x86_64/egg/EGG-INFO/scripts
#19 0.634 copying build/scripts-3.11/osmodumpdoc.py -> build/bdist.linux-x86_64/egg/EGG-INFO/scripts
#19 0.634 copying build/scripts-3.11/osmotestvty.py -> build/bdist.linux-x86_64/egg/EGG-INFO/scripts
#19 0.634 copying build/scripts-3.11/osmo_trap2cgi.py -> build/bdist.linux-x86_64/egg/EGG-INFO/scripts
#19 0.634 copying build/scripts-3.11/osmotestconfig.py -> build/bdist.linux-x86_64/egg/EGG-INFO/scripts
#19 0.634 copying build/scripts-3.11/osmo_ctrl.py -> build/bdist.linux-x86_64/egg/EGG-INFO/scripts
#19 0.634 copying build/scripts-3.11/osmo_verify_transcript_ctrl.py -> build/bdist.linux-x86_64/egg/EGG-INFO/scripts
#19 0.634 copying build/scripts-3.11/osmo_interact_ctrl.py -> build/bdist.linux-x86_64/egg/EGG-INFO/scripts
#19 0.634 copying build/scripts-3.11/osmo_interact_vty.py -> build/bdist.linux-x86_64/egg/EGG-INFO/scripts
#19 0.635 copying build/scripts-3.11/osmo_verify_transcript_vty.py -> build/bdist.linux-x86_64/egg/EGG-INFO/scripts
#19 0.635 changing mode of build/bdist.linux-x86_64/egg/EGG-INFO/scripts/osmo_rate_ctr2csv.py to 755
#19 0.635 changing mode of build/bdist.linux-x86_64/egg/EGG-INFO/scripts/osmodumpdoc.py to 755
#19 0.635 changing mode of build/bdist.linux-x86_64/egg/EGG-INFO/scripts/osmotestvty.py to 755
#19 0.635 changing mode of build/bdist.linux-x86_64/egg/EGG-INFO/scripts/osmo_trap2cgi.py to 755
#19 0.635 changing mode of build/bdist.linux-x86_64/egg/EGG-INFO/scripts/osmotestconfig.py to 755
#19 0.635 changing mode of build/bdist.linux-x86_64/egg/EGG-INFO/scripts/osmo_ctrl.py to 755
#19 0.635 changing mode of build/bdist.linux-x86_64/egg/EGG-INFO/scripts/osmo_verify_transcript_ctrl.py to 755
#19 0.635 changing mode of build/bdist.linux-x86_64/egg/EGG-INFO/scripts/osmo_interact_ctrl.py to 755
#19 0.635 changing mode of build/bdist.linux-x86_64/egg/EGG-INFO/scripts/osmo_interact_vty.py to 755
#19 0.635 changing mode of build/bdist.linux-x86_64/egg/EGG-INFO/scripts/osmo_verify_transcript_vty.py to 755
#19 0.635 copying osmopython.egg-info/PKG-INFO -> build/bdist.linux-x86_64/egg/EGG-INFO
#19 0.635 copying osmopython.egg-info/SOURCES.txt -> build/bdist.linux-x86_64/egg/EGG-INFO
#19 0.635 copying osmopython.egg-info/dependency_links.txt -> build/bdist.linux-x86_64/egg/EGG-INFO
#19 0.635 copying osmopython.egg-info/top_level.txt -> build/bdist.linux-x86_64/egg/EGG-INFO
#19 0.635 zip_safe flag not set; analyzing archive contents...
#19 0.636 osmopy.__pycache__.trap_helper.cpython-311: module references __file__
#19 0.636 creating dist
#19 0.636 creating 'dist/osmopython-0.3.0-py3.11.egg' and adding 'build/bdist.linux-x86_64/egg' to it
#19 0.641 removing 'build/bdist.linux-x86_64/egg' (and everything under it)
#19 0.642 Processing osmopython-0.3.0-py3.11.egg
#19 0.643 creating /usr/local/lib/python3.11/dist-packages/osmopython-0.3.0-py3.11.egg
#19 0.643 Extracting osmopython-0.3.0-py3.11.egg to /usr/local/lib/python3.11/dist-packages
#19 0.652 Adding osmopython 0.3.0 to easy-install.pth file
#19 0.653 Installing osmo_rate_ctr2csv.py script to /usr/local/bin
#19 0.653 Installing osmodumpdoc.py script to /usr/local/bin
#19 0.654 Installing osmotestvty.py script to /usr/local/bin
#19 0.654 Installing osmo_trap2cgi.py script to /usr/local/bin
#19 0.654 Installing osmotestconfig.py script to /usr/local/bin
#19 0.655 Installing osmo_ctrl.py script to /usr/local/bin
#19 0.655 Installing osmo_verify_transcript_ctrl.py script to /usr/local/bin
#19 0.655 Installing osmo_interact_ctrl.py script to /usr/local/bin
#19 0.656 Installing osmo_interact_vty.py script to /usr/local/bin
#19 0.656 Installing osmo_verify_transcript_vty.py script to /usr/local/bin
#19 0.656 
#19 0.656 Installed /usr/local/lib/python3.11/dist-packages/osmopython-0.3.0-py3.11.egg
#19 0.657 Processing dependencies for osmopython==0.3.0
#19 0.657 Finished processing dependencies for osmopython==0.3.0
#19 0.676 + cd ..
#19 0.676 + rm -rf osmo-python-tests
#19 DONE 0.8s

#20 [11/16] ADD	HTTPS://GERRIT.OSMOCOM.ORG/PLUGINS/GITILES/OSMO-CI/+/MASTER?FORMAT=TEXT /tmp/osmo-ci-commit
#20 DONE 0.2s

#21 [12/16] RUN 	set -x && 	git clone --depth=1 https://gerrit.osmocom.org/osmo-ci osmo-ci && 	su build -c "cd osmo-ci/scripts && cp -v *.sh *.py /usr/local/bin" && 	rm -rf osmo-ci
#21 0.283 + git clone --depth=1 https://gerrit.osmocom.org/osmo-ci osmo-ci
#21 0.283 Cloning into 'osmo-ci'...
#21 0.372 + su build -c cd osmo-ci/scripts && cp -v *.sh *.py /usr/local/bin
#21 0.376 'cat-testlogs.sh' -> '/usr/local/bin/cat-testlogs.sh'
#21 0.376 'common.sh' -> '/usr/local/bin/common.sh'
#21 0.376 'docker-cleanup.sh' -> '/usr/local/bin/docker-cleanup.sh'
#21 0.376 'osmo-build-dep.sh' -> '/usr/local/bin/osmo-build-dep.sh'
#21 0.376 'osmo-ci-docker-rebuild.sh' -> '/usr/local/bin/osmo-ci-docker-rebuild.sh'
#21 0.376 'osmo-clean-workspace.sh' -> '/usr/local/bin/osmo-clean-workspace.sh'
#21 0.376 'osmo-deps.sh' -> '/usr/local/bin/osmo-deps.sh'
#21 0.376 'osmo-layer1-headers.sh' -> '/usr/local/bin/osmo-layer1-headers.sh'
#21 0.376 'osmocom-api-doxygen.sh' -> '/usr/local/bin/osmocom-api-doxygen.sh'
#21 0.376 'osmocom-build-old-tags-against-master.sh' -> '/usr/local/bin/osmocom-build-old-tags-against-master.sh'
#21 0.376 'osmocom-list-commits.sh' -> '/usr/local/bin/osmocom-list-commits.sh'
#21 0.376 'osmocom-obs-link.sh' -> '/usr/local/bin/osmocom-obs-link.sh'
#21 0.376 'osmocom-packages-docker.sh' -> '/usr/local/bin/osmocom-packages-docker.sh'
#21 0.376 'repo-install-test.sh' -> '/usr/local/bin/repo-install-test.sh'
#21 0.376 'verify_endian_header.sh' -> '/usr/local/bin/verify_endian_header.sh'
#21 0.376 'xgoldmon-jenkins.sh' -> '/usr/local/bin/xgoldmon-jenkins.sh'
#21 0.376 'verify_log_statements.py' -> '/usr/local/bin/verify_log_statements.py'
#21 0.376 'verify_value_string_arrays_are_terminated.py' -> '/usr/local/bin/verify_value_string_arrays_are_terminated.py'
#21 0.376 + rm -rf osmo-ci
#21 DONE 0.4s

#22 [13/16] ADD	HTTPS://GERRIT.OSMOCOM.ORG/PLUGINS/GITILES/OSMO-GSM-MANUALS/+/MASTER?FORMAT=TEXT /tmp/osmo-gsm-manuals-commit
#22 DONE 0.1s

#23 [14/16] RUN	GIT -C /opt clone --depth=1 https://gerrit.osmocom.org/osmo-gsm-manuals
#23 0.326 Cloning into 'osmo-gsm-manuals'...
#23 DONE 0.5s

#24 [15/16] ADD	HTTPS://DOWNLOADS.OSMOCOM.ORG/PACKAGES/OSMOCOM:/NIGHTLY/DEBIAN_12//RELEASE /tmp/Release
#24 DONE 0.1s

#25 [16/16] RUN	SET -x && 	echo "deb [signed-by=/etc/apt/trusted.gpg.d/obs.osmocom.org.asc] https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_12/ ./" 		> /etc/apt/sources.list.d/osmocom-nightly.list && 	apt-get update && 	apt-get install -y --no-install-recommends 		liblimesuite-dev 		libuhd-dev 		libulfius-dev 		&& 	apt-get clean
#25 0.340 + echo deb [signed-by=/etc/apt/trusted.gpg.d/obs.osmocom.org.asc] https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_12/ ./
#25 0.340 + apt-get update
#25 0.382 Hit:1 http://deb.debian.org/debian bookworm InRelease
#25 0.382 Hit:2 http://deb.debian.org/debian bookworm-updates InRelease
#25 0.382 Hit:3 http://deb.debian.org/debian-security bookworm-security InRelease
#25 0.490 Get:4 https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_12 ./ InRelease [1579 B]
#25 0.760 Get:5 https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_12 ./ Packages [197 kB]
#25 0.797 Fetched 199 kB in 0s (446 kB/s)
#25 0.797 Reading package lists...
#25 1.064 + apt-get install -y --no-install-recommends liblimesuite-dev libuhd-dev libulfius-dev
#25 1.067 Reading package lists...
#25 1.315 Building dependency tree...
#25 1.367 Reading state information...
#25 1.430 The following additional packages will be installed:
#25 1.430   libcurl4-gnutls-dev liblimesuite23.11-1 libmicrohttpd-dev libmicrohttpd12
#25 1.430   liborcania-dev liborcania2.3 libsystemd-dev libuhd4.3.0 libulfius2.7
#25 1.430   libyder-dev libyder2.0
#25 1.430 Suggested packages:
#25 1.430   libcurl4-doc libidn-dev libldap2-dev librtmp-dev libssh2-1-dev uhd-doc
#25 1.430   uhd-host
#25 1.430 Recommended packages:
#25 1.430   limesuite-udev limesuite-images gnuradio-dev
#25 1.501 The following NEW packages will be installed:
#25 1.501   libcurl4-gnutls-dev liblimesuite-dev liblimesuite23.11-1 libmicrohttpd-dev
#25 1.501   libmicrohttpd12 liborcania-dev liborcania2.3 libsystemd-dev libuhd-dev
#25 1.501   libuhd4.3.0 libulfius-dev libulfius2.7 libyder-dev libyder2.0
#25 1.522 0 upgraded, 14 newly installed, 0 to remove and 2 not upgraded.
#25 1.522 Need to get 5782 kB of archives.
#25 1.522 After this operation, 24.8 MB of additional disk space will be used.
#25 1.522 Get:1 http://deb.debian.org/debian bookworm/main amd64 libcurl4-gnutls-dev amd64 7.88.1-10+deb12u8 [485 kB]
#25 1.539 Get:2 https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_12 ./ liblimesuite23.11-1 23.11.0.1.2145.1851.202501222026 [263 kB]
#25 1.568 Get:3 http://deb.debian.org/debian bookworm/main amd64 libmicrohttpd12 amd64 0.9.75-6 [119 kB]
#25 1.572 Get:4 https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_12 ./ liblimesuite-dev 23.11.0.1.2145.1851.202501222026 [53.0 kB]
#25 1.572 Get:5 http://deb.debian.org/debian bookworm/main amd64 libmicrohttpd-dev amd64 0.9.75-6 [291 kB]
#25 1.577 Get:6 http://deb.debian.org/debian bookworm/main amd64 liborcania2.3 amd64 2.3.2-1 [13.6 kB]
#25 1.583 Get:7 http://deb.debian.org/debian bookworm/main amd64 liborcania-dev amd64 2.3.2-1 [115 kB]
#25 1.585 Get:8 http://deb.debian.org/debian bookworm/main amd64 libsystemd-dev amd64 252.33-1~deb12u1 [354 kB]
#25 1.590 Get:9 http://deb.debian.org/debian bookworm/main amd64 libuhd4.3.0 amd64 4.3.0.0+ds1-5 [3445 kB]
#25 1.627 Get:10 http://deb.debian.org/debian bookworm/main amd64 libuhd-dev amd64 4.3.0.0+ds1-5 [219 kB]
#25 1.627 Get:11 http://deb.debian.org/debian bookworm/main amd64 libyder2.0 amd64 1.4.19-1 [9420 B]
#25 1.627 Get:12 http://deb.debian.org/debian bookworm/main amd64 libulfius2.7 amd64 2.7.13-1 [55.3 kB]
#25 1.628 Get:13 http://deb.debian.org/debian bookworm/main amd64 libyder-dev amd64 1.4.19-1 [103 kB]
#25 1.628 Get:14 http://deb.debian.org/debian bookworm/main amd64 libulfius-dev amd64 2.7.13-1 [256 kB]
#25 1.729 debconf: delaying package configuration, since apt-utils is not installed
#25 1.775 Fetched 5782 kB in 0s (46.4 MB/s)
#25 1.837 Selecting previously unselected package libcurl4-gnutls-dev:amd64.
#25 1.837 (Reading database ... 
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 115758 files and directories currently installed.)
#25 1.875 Preparing to unpack .../00-libcurl4-gnutls-dev_7.88.1-10+deb12u8_amd64.deb ...
#25 1.891 Unpacking libcurl4-gnutls-dev:amd64 (7.88.1-10+deb12u8) ...
#25 2.055 Selecting previously unselected package liblimesuite23.11-1:amd64.
#25 2.063 Preparing to unpack .../01-liblimesuite23.11-1_23.11.0.1.2145.1851.202501222026_amd64.deb ...
#25 2.096 Unpacking liblimesuite23.11-1:amd64 (23.11.0.1.2145.1851.202501222026) ...
#25 2.221 Selecting previously unselected package liblimesuite-dev.
#25 2.238 Preparing to unpack .../02-liblimesuite-dev_23.11.0.1.2145.1851.202501222026_amd64.deb ...
#25 2.255 Unpacking liblimesuite-dev (23.11.0.1.2145.1851.202501222026) ...
#25 2.400 Selecting previously unselected package libmicrohttpd12:amd64.
#25 2.407 Preparing to unpack .../03-libmicrohttpd12_0.9.75-6_amd64.deb ...
#25 2.423 Unpacking libmicrohttpd12:amd64 (0.9.75-6) ...
#25 2.544 Selecting previously unselected package libmicrohttpd-dev:amd64.
#25 2.556 Preparing to unpack .../04-libmicrohttpd-dev_0.9.75-6_amd64.deb ...
#25 2.572 Unpacking libmicrohttpd-dev:amd64 (0.9.75-6) ...
#25 2.735 Selecting previously unselected package liborcania2.3:amd64.
#25 2.743 Preparing to unpack .../05-liborcania2.3_2.3.2-1_amd64.deb ...
#25 2.760 Unpacking liborcania2.3:amd64 (2.3.2-1) ...
#25 2.881 Selecting previously unselected package liborcania-dev:amd64.
#25 2.898 Preparing to unpack .../06-liborcania-dev_2.3.2-1_amd64.deb ...
#25 2.914 Unpacking liborcania-dev:amd64 (2.3.2-1) ...
#25 3.035 Selecting previously unselected package libsystemd-dev:amd64.
#25 3.053 Preparing to unpack .../07-libsystemd-dev_252.33-1~deb12u1_amd64.deb ...
#25 3.069 Unpacking libsystemd-dev:amd64 (252.33-1~deb12u1) ...
#25 3.224 Selecting previously unselected package libuhd4.3.0:amd64.
#25 3.232 Preparing to unpack .../08-libuhd4.3.0_4.3.0.0+ds1-5_amd64.deb ...
#25 3.248 Unpacking libuhd4.3.0:amd64 (4.3.0.0+ds1-5) ...
#25 3.529 Selecting previously unselected package libuhd-dev:amd64.
#25 3.547 Preparing to unpack .../09-libuhd-dev_4.3.0.0+ds1-5_amd64.deb ...
#25 3.564 Unpacking libuhd-dev:amd64 (4.3.0.0+ds1-5) ...
#25 3.708 Selecting previously unselected package libyder2.0:amd64.
#25 3.726 Preparing to unpack .../10-libyder2.0_1.4.19-1_amd64.deb ...
#25 3.743 Unpacking libyder2.0:amd64 (1.4.19-1) ...
#25 3.879 Selecting previously unselected package libulfius2.7:amd64.
#25 3.897 Preparing to unpack .../11-libulfius2.7_2.7.13-1_amd64.deb ...
#25 3.914 Unpacking libulfius2.7:amd64 (2.7.13-1) ...
#25 4.027 Selecting previously unselected package libyder-dev:amd64.
#25 4.035 Preparing to unpack .../12-libyder-dev_1.4.19-1_amd64.deb ...
#25 4.052 Unpacking libyder-dev:amd64 (1.4.19-1) ...
#25 4.144 Selecting previously unselected package libulfius-dev:amd64.
#25 4.148 Preparing to unpack .../13-libulfius-dev_2.7.13-1_amd64.deb ...
#25 4.164 Unpacking libulfius-dev:amd64 (2.7.13-1) ...
#25 4.289 Setting up libuhd4.3.0:amd64 (4.3.0.0+ds1-5) ...
#25 4.337 Setting up libcurl4-gnutls-dev:amd64 (7.88.1-10+deb12u8) ...
#25 4.386 Setting up libmicrohttpd12:amd64 (0.9.75-6) ...
#25 4.434 Setting up liborcania2.3:amd64 (2.3.2-1) ...
#25 4.482 Setting up liblimesuite23.11-1:amd64 (23.11.0.1.2145.1851.202501222026) ...
#25 4.533 Setting up libyder2.0:amd64 (1.4.19-1) ...
#25 4.587 Setting up libmicrohttpd-dev:amd64 (0.9.75-6) ...
#25 4.639 Setting up libuhd-dev:amd64 (4.3.0.0+ds1-5) ...
#25 4.691 Setting up libsystemd-dev:amd64 (252.33-1~deb12u1) ...
#25 4.743 Setting up liblimesuite-dev (23.11.0.1.2145.1851.202501222026) ...
#25 4.795 Setting up liborcania-dev:amd64 (2.3.2-1) ...
#25 4.844 Setting up libulfius2.7:amd64 (2.7.13-1) ...
#25 4.898 Setting up libyder-dev:amd64 (1.4.19-1) ...
#25 4.950 Setting up libulfius-dev:amd64 (2.7.13-1) ...
#25 5.004 Processing triggers for man-db (2.11.2-2) ...
#25 5.060 Processing triggers for libc-bin (2.36-9+deb12u9) ...
#25 5.181 + apt-get clean
#25 DONE 5.3s

#26 exporting to image
#26 exporting layers
#26 exporting layers 16.6s done
#26 writing image sha256:7415f083f100759c2b41e2a2c257a4009ca19b2e1aebb3a827cf26170a9d93a8 done
#26 naming to docker.io/osmocom-build/debian-bookworm-build:latest 0.0s done
#26 DONE 16.6s
rm -rf .common
make: Leaving directory '/home/osmocom-build/jenkins/workspace/update-osmo-ci-on-slaves/label/build5-deb12build-ansible/_docker_playground/debian-bookworm-build'
+ docker_image_exists debian-bookworm-build
+ docker images -q osmocom-build/debian-bookworm-build
+ test -n 7415f083f100
+ list_osmo_packages debian-bookworm debian-bookworm-build
+ local distro=debian-bookworm
+ local image=debian-bookworm-build
+ local docker_run_sh=docker run --rm --entrypoint=/bin/sh osmocom-build/debian-bookworm-build -c
+ [ -n  ]
+ return
+ [  = registry.osmocom.org ]
+ docker_depends debian-bookworm-erlang
+ local feed
+ depends=
+ [ -n  ]
+ docker_distro_from_image_name debian-bookworm-erlang
+ echo debian-bookworm
+ distro_arg=debian-bookworm
+ [ -z  ]
+ docker_upstream_distro_from_image_name debian-bookworm-erlang
+ echo debian:bookworm
+ upstream_distro_arg=debian:bookworm
+ docker_dir_from_image_name debian-bookworm-erlang
+ echo debian-bookworm-erlang
+ dir=debian-bookworm-erlang
+ [ -z  ]
+ pull_arg=--pull
+ grep ^FROM ../debian-bookworm-erlang/Dockerfile
+ from_line=FROM	${REGISTRY}/${UPSTREAM_DISTRO}
+ echo FROM	${REGISTRY}/${UPSTREAM_DISTRO}
+ grep -q $USER
+ set +x
Building image: debian-bookworm-erlang (export NO_DOCKER_IMAGE_BUILD=1 to prevent this)
+ docker_osmo_ttcn3_branch
+ [ -n  ]
+ echo master
+ make -C ../debian-bookworm-erlang BUILD_ARGS=--pull UPSTREAM_DISTRO=debian:bookworm DISTRO=debian-bookworm IMAGE=osmocom-build/debian-bookworm-erlang OSMO_TTCN3_BRANCH=master
make: Entering directory '/home/osmocom-build/jenkins/workspace/update-osmo-ci-on-slaves/label/build5-deb12build-ansible/_docker_playground/debian-bookworm-erlang'
awk: fatal: cannot open file `.release' for reading: No such file or directory
awk: fatal: cannot open file `.release' for reading: No such file or directory
awk: fatal: cannot open file `.release' for reading: No such file or directory
rm -rf .common
cp -r /home/osmocom-build/jenkins/workspace/update-osmo-ci-on-slaves/label/build5-deb12build-ansible/_docker_playground/common .common
INFO: .release created
release=0.0.0
docker build \
	--build-arg USER=osmocom-build \
	--build-arg UID=1000 \
	--build-arg REGISTRY=docker.io \
	--build-arg OSMO_TTCN3_BRANCH=master \
	--build-arg UPSTREAM_DISTRO=debian:bookworm \
	--build-arg DISTRO=debian-bookworm \
	--build-arg OSMOCOM_REPO_MIRROR=https://downloads.osmocom.org \
	--build-arg OSMOCOM_REPO_PATH=packages/osmocom: \
	--build-arg OSMOCOM_REPO_VERSION=latest \
	--build-arg OSMOCOM_REPO_TESTSUITE_MIRROR=https://downloads.osmocom.org \
	--build-arg ASTERISK_BRANCH=sysmocom/20.7.0 \
	--build-arg LIBOSMOCORE_BRANCH=master \
	--build-arg OSMO_BB_BRANCH=master \
	--build-arg OSMO_BSC_BRANCH=master \
	--build-arg OSMO_BTS_BRANCH=master \
	--build-arg OSMO_CBC_BRANCH=master \
	--build-arg OSMO_DIA2GSUP_BRANCH=master \
	--build-arg OSMO_EPDG_BRANCH=master \
	--build-arg OSMO_GBPROXY_BRANCH=master \
	--build-arg OSMO_GGSN_BRANCH=master \
	--build-arg OSMO_GSM_TESTER_BRANCH=master \
	--build-arg OSMO_HLR_BRANCH=master \
	--build-arg OSMO_HNBGW_BRANCH=master \
	--build-arg OSMO_HNODEB_BRANCH=master \
	--build-arg OSMO_IUH_BRANCH=master \
	--build-arg OSMO_MGW_BRANCH=master \
	--build-arg OSMO_MSC_BRANCH=master \
	--build-arg OSMO_NITB_BRANCH=master \
	--build-arg OSMO_PCU_BRANCH=master \
	--build-arg OSMO_REMSIM_BRANCH=master \
	--build-arg OSMO_SGSN_BRANCH=master \
	--build-arg OSMO_SIP_BRANCH=master \
	--build-arg OSMO_STP_BRANCH=master \
	--build-arg OSMO_UECUPS_BRANCH=master \
	--build-arg OPEN5GS_BRANCH=main \
	--build-arg PJPROJECT_BRANCH=sysmocom/2.14 \
	--pull -t osmocom-build/debian-bookworm-erlang:latest .
#0 building with "default" instance using docker driver

#1 [internal] load build definition from Dockerfile
#1 transferring dockerfile: 1.62kB done
#1 DONE 0.1s

#2 [internal] load metadata for docker.io/library/debian:bookworm
#2 DONE 0.7s

#3 [internal] load .dockerignore
#3 transferring context: 2B done
#3 DONE 0.1s

#4 [1/9] FROM docker.io/library/debian:bookworm@sha256:321341744acb788e251ebd374aecc1a42d60ce65da7bd4ee9207ff6be6686a62
#4 DONE 0.0s

#5 [internal] load build context
#5 transferring context: 1.50kB done
#5 DONE 0.1s

#6 [6/9] ADD	HTTPS://DOWNLOADS.OSMOCOM.ORG/PACKAGES/OSMOCOM:/LATEST/DEBIAN_12//RELEASE /tmp/Release
#6 DONE 0.2s

#7 [5/9] COPY	.COMMON/RELEASE.KEY /usr/share/keyrings/osmocom-latest.asc
#7 CACHED

#8 [6/9] ADD	HTTPS://DOWNLOADS.OSMOCOM.ORG/PACKAGES/OSMOCOM:/LATEST/DEBIAN_12//RELEASE /tmp/Release
#8 CACHED

#9 [3/9] RUN	SET -x && 	apt-get update && 	apt-get install -y --no-install-recommends 		build-essential 		git 		iproute2 		netcat-openbsd 		procps 		tcpdump 		vim 		wget 		&& 	apt-get clean
#9 CACHED

#10 [2/9] RUN	SET -x && 	apt-get update && 	apt-get install -y --no-install-recommends 		erlang 		rebar 		rebar3 		&& 	apt-get clean
#10 CACHED

#11 [4/9] RUN	SET -x && 	apt-get update && 	apt-get install -y --no-install-recommends 		libpcap-dev 		libsctp1 		&& 	apt-get clean
#11 CACHED

#12 [7/9] RUN	SET -x && 	apt-get update && 	apt-get install -y --no-install-recommends 		ca-certificates 		gnupg 		&& 	apt-get clean && 	echo "deb [signed-by=/usr/share/keyrings/osmocom-latest.asc] https://downloads.osmocom.org/packages/osmocom:/latest/Debian_12/ ./" 		> /etc/apt/sources.list.d/osmocom-latest.list
#12 CACHED

#13 [8/9] RUN	USERADD --uid=1000 -m build
#13 CACHED

#14 [9/9] WORKDIR	/HOME/BUILD
#14 CACHED

#15 exporting to image
#15 exporting layers done
#15 writing image sha256:d951e4e3fa045bab0f87f8cb32fd9792111645de293ce09845f45ffbe8b30598 done
#15 naming to docker.io/osmocom-build/debian-bookworm-erlang:latest done
#15 DONE 0.0s
rm -rf .common
make: Leaving directory '/home/osmocom-build/jenkins/workspace/update-osmo-ci-on-slaves/label/build5-deb12build-ansible/_docker_playground/debian-bookworm-erlang'
+ docker_image_exists debian-bookworm-erlang
+ docker images -q osmocom-build/debian-bookworm-erlang
+ test -n d951e4e3fa04
+ list_osmo_packages debian-bookworm debian-bookworm-erlang
+ local distro=debian-bookworm
+ local image=debian-bookworm-erlang
+ local docker_run_sh=docker run --rm --entrypoint=/bin/sh osmocom-build/debian-bookworm-erlang -c
+ [ -n  ]
+ return
+ ret=0
+ cd /home/osmocom-build/jenkins/workspace/update-osmo-ci-on-slaves/label/build5-deb12build-ansible
+ return 0
Finished: SUCCESS