Skip to content
Changes
- osmo-ns-master: build without uring for debian 10
—
Oliver Smith /
detail
- debian-buster-obs-latest: new container
—
Oliver Smith /
detail
- jenkins-common: support {latest,master}-debian10
—
Oliver Smith /
detail
- Remove ttcn3 testsuites ported to testenv, part 3
—
Oliver Smith /
detail
- upgrade to gerrit 3.10.x as 3.9 is EOL on May 12th
—
laforge /
detail
- debian-bookworm-build: remove pysispm, pydbus
—
Oliver Smith /
detail
- debian-bookworm-build: fix lcov-to-cobertura-xml
—
Oliver Smith /
detail
- ttcn3-bts-test: Run fake_trx with sched-prio-rr
—
Pau Espin Pedrol /
detail
- ttcn3-bts: Allow running osmo-bts-trx with rt prio
—
Pau Espin Pedrol /
detail
- osmo-{bsc,bts,sgsn}-master: remove unused deps
—
Vadim Yanitskiy /
detail
- debian-bookworm-build: add xxd
—
Oliver Smith /
detail
- update redmine to latest 5.1.7 (security update)
—
laforge /
detail
- nplab-{m3ua,sua}-test: Record pcap of all testsuite run
—
laforge /
detail
- debian-bookworm-build: add linting tools
—
Oliver Smith /
detail
- ttcn3-bts-test: do not use respawn.sh
—
laforge /
detail
- debian-bookworm-aram-applet: new container
—
Oliver Smith /
detail
- osmo-pcap-master: depend on libosmo-netif
—
Oliver Smith /
detail
- upgrade gerrit to 3.9.7
—
laforge /
detail
- redmine: upgrade to 5.1.5
—
laforge /
detail
- ttcn3-remsim: Enable debug output of bankd
—
Pau Espin Pedrol /
detail
- make: Fix OSMO_REMSIM_BRANCH not passed
—
Pau Espin Pedrol /
detail
- debian-bookworm-android: new container
—
Oliver Smith /
detail
- jenkins-common: add NO_DOCKER_IMAGE_PULL
—
Oliver Smith /
detail
- Remove ttcn3 testsuites ported to testenv, part 2
—
Oliver Smith /
detail
- osmo-gsm-tester: use debian-bookworm-build
—
Oliver Smith /
detail
- make/Makefile: Update git branch references for asterisk and pjproject
—
Pau Espin Pedrol /
detail
- upgrade gerrit to 3.8.6
—
laforge /
detail
- upgrade gerrit to 3.9.5
—
laforge /
detail
- redmine: upgrade our docker container to redmine 5.1.3
—
laforge /
detail
- fpga-build: Update RISC-V toolchain to riscv-none-elf
—
Sylvain Munaut /
detail
- debian-bookworm-titan: chown 1000 for deps
—
Oliver Smith /
detail
- debian-buster-jenkins: remove pysim
—
Oliver Smith /
detail
- osmo-stp-master: libosmo-sccp -> libosmo-sigtran
—
Oliver Smith /
detail
- debian-bookworm-build-arm: FROM: add arm32v7
—
Oliver Smith /
detail
- osmo-*-master: don't install libosmo-sccp-dev
—
Oliver Smith /
detail
- Remove ttcn3 testsuites ported to testenv, part 1
—
Oliver Smith /
detail
- ttcn3-epdg-test: restore osmo-epdg.latest.config
—
Oliver Smith /
detail
- ttcn3-epdg-test: fix osmo-epdg path for latest
—
Oliver Smith /
detail
- ttcn3-epdg-test: remove "cp osmo-epdg.latest.config"
—
Oliver Smith /
detail
- ttcn3-epdg-test: remove latest code path
—
Oliver Smith /
detail
- common/Release.key: update
—
Oliver Smith /
detail
- debian-bookworm-build: update sphinx-argparse branch
—
Oliver Smith /
detail
- scripts/kernel-test/smoke-test.sh: Log qemu output to stdout
—
Pau Espin Pedrol /
detail
- ttcn3-ggsn-test: Reduce timers for ggsn-test-kernel-torvalds
—
dwillmann /
detail
- ttcn3-stp-test: remove <= 1.8.x code path
—
Oliver Smith /
detail
- ttcn3-sgsn: Use new 172.18.8.104 in emulated RNC
—
Pau Espin Pedrol /
detail
- ttcn3-sgsn: Use 2nd IP address on emulated HNBGW
—
Pau Espin Pedrol /
detail
- asterisk: Enable use of EVS codec
—
Pau Espin Pedrol /
detail
- asterisk: extensions.conf: Allow extra MO call from SIP UA which HOLDed
—
Pau Espin Pedrol /
detail
- ttcn3-asterisk: pjsip.conf: Update config name s/ims_aka/volte/g
—
Pau Espin Pedrol /
detail
- ttcn3-asterisk: extensions.conf: Reject subsequent MO/MT calls in VoLTE
—
Pau Espin Pedrol /
detail
- ttcn3-asterisk: extensions.conf: Reject calls if all SIP UAs busy in
—
Pau Espin Pedrol /
detail
- asterisk: dnsmasq.conf: Avoid forwarding queries to other DNS servers
—
Pau Espin Pedrol /
detail
- asterisk: timeout ping DNS validations after 3 seconds
—
Pau Espin Pedrol /
detail
- asterisk: Wait for Asterisk ready before starting testsuite
—
Pau Espin Pedrol /
detail
- centos7: use vault.centos.org
—
Oliver Smith /
detail
- asterisk: Wait for dnsmasq resolver ready before starting Asterisk
—
Pau Espin Pedrol /
detail
- dnsmasq: Log additional query info with --log-queries=extra
—
Pau Espin Pedrol /
detail
- asterisk: pjsip.conf: Forward Hold/Resume SIP UA -> IMS Core
—
Pau Espin Pedrol /
detail
- ttcn3-s1gw-test: update logging config in osmo-s1gw.config
—
Vadim Yanitskiy /
detail
- seccomp_profile: import
—
Oliver Smith /
detail
- seccomp_profile: enable io_uring
—
Oliver Smith /
detail
- ttcn3-asterisk: Allow running testsuite with IPv4 and IPv6 configs
—
Pau Espin Pedrol /
detail
- ttcn3-asterisk: Small improvements to ease introducing IPv6 support
—
Pau Espin Pedrol /
detail
- osmo-epdg: add support for testing for latest
—
lynxis /
detail
- jenkins-common.sh: Store IP subnet prefix in global variable
—
Pau Espin Pedrol /
detail
- ttcn3-asterisk: Move ttcn3 docker related files to ttcn3/ subdir
—
Pau Espin Pedrol /
detail
- asterisk: conf: Handle precondition through app_waitforprecondition.so
—
Pau Espin Pedrol /
detail
- asterisk: Allow alaw code from IMS until evs is supported
—
Pau Espin Pedrol /
detail
- ttcn3-ggsn-test/jenkins: tweak loop logic
—
Oliver Smith /
detail
- asterisk: pjsip.conf: Set IMEI
—
Pau Espin Pedrol /
detail
- ttcn3-asterisk: Fix ICSI value encoding
—
Pau Espin Pedrol /
detail
- asterisk: logger.conf: Log milliseconds in timestamps
—
Pau Espin Pedrol /
detail
- asterisk-master: Fetch required branch directly
—
Pau Espin Pedrol /
detail
- asterisk-master: Build from jolly/work branch by default
—
Pau Espin Pedrol /
detail
- ttcn3-asterisk: pjsip.conf: Avoid advertising support for +g.3gpp.smsip
—
Pau Espin Pedrol /
detail
- ttcn3-asterisk: pjsip.conf: Use reliable provisional responses if peer
—
Pau Espin Pedrol /
detail
- ttcn3-asterisk: Set mp_ims_imei matching pjsip.conf
—
Pau Espin Pedrol /
detail
- ttcn3-s1gw-test: start osmo-s1gw container with --user=root
—
Vadim Yanitskiy /
detail
- debian-{bullseye,bookworm}-erlang: fix non-alphabetic pkg order
—
Vadim Yanitskiy /
detail
- debian-{bullseye,bookworm}-erlang: install iproute2
—
Vadim Yanitskiy /
detail
- ttcn3-s1gw-test: fix using unassigned addr for osmo-s1gw
—
Vadim Yanitskiy /
detail
- ttcn3-s1gw-test: fixup: align with the moduleparam naming changes
—
Vadim Yanitskiy /
detail
- ttcn3-s1gw-test: align with the moduleparam naming changes
—
Vadim Yanitskiy /
detail
- s1gw: add osmo-s1gw-master
—
Vadim Yanitskiy /
detail
- s1gw: add ttcn3-s1gw-test
—
Vadim Yanitskiy /
detail
- jenkins-common: Treat -asan builds the same as -master
—
dwillmann /
detail
- debian-bookworm-*: useradd -d -m instead of mkdir
—
Oliver Smith /
detail
- asterisk: extensions.conf: Route non-local extensions towards IMS side
—
Pau Espin Pedrol /
detail
- ttcn3-asterisk: Add extra IP addr in ttcn3 docker for IMS Core
—
Pau Espin Pedrol /
detail
- asterisk: extensions.conf: Forward call from VoLTE to all registered
—
Pau Espin Pedrol /
detail
- debian-bookworm-obs-asan: new container
—
Oliver Smith /
detail
- asterisk: pjsip.conf: Set default p_access_network_info
—
Pau Espin Pedrol /
detail
- asterisk: pjsip.conf: Update IMS port asterisk config
—
Pau Espin Pedrol /
detail
- Introduce dnsmasq docker container
—
Pau Espin Pedrol /
detail
- ttcn3-asterisk: Use dnsmasq to let asterisk resolve IMS DNS
—
Pau Espin Pedrol /
detail
- asterisk: pjsip.conf: Configure Contact field
—
Pau Espin Pedrol /
detail
- asterisk: pjsip.conf: identify incoming register started by local SIP
—
Pau Espin Pedrol /
detail
- asterisk: pjsip.conf: Fix msisdn not used in From field during IMS
—
Pau Espin Pedrol /
detail
- asterisk-master: Install AMR enc/dec dependencies
—
Pau Espin Pedrol /
detail
- asterisk: pjsip.conf: Use TCP when forwarding INVITE to IMS core
—
Pau Espin Pedrol /
detail
- asterisk: pjsip.conf: Disable remote bridging between local SIP and IMS
—
Pau Espin Pedrol /
detail
- asterisk: pjsip.conf: Stop Asterisk doing unexpected REGISTER on IMS
—
Pau Espin Pedrol /
detail
- asterisk: pjsip.conf: Enable USIM Auth over AMI interface
—
Pau Espin Pedrol /
detail
- ttcn3-bts-test: also execute tests from BTS_Tests_ASCI
—
Vadim Yanitskiy /
detail
- ttcn3-bsc-test: also execute tests from BSC_Tests_ASCI
—
Vadim Yanitskiy /
detail
- ttcn3-asterisk: Configure docker testsuite to be able to set up ipsec
—
Pau Espin Pedrol /
detail
- debian-*: install pylint from debian repos
—
Oliver Smith /
detail
- Revert "ttcn3-docker-run.sh: Fix dumpcap failing to access /data inside
—
Oliver Smith /
detail
- ttcn3-ggsn-test-ogs: run smf in 4g only mode
—
Oliver Smith /
detail
- ttcn3-asterisk: Configure asterisk for initial SIP register on IMS side
—
Pau Espin Pedrol /
detail
- ttcn3-docker-run.sh: Fix dumpcap failing to access /data inside docker
—
Pau Espin Pedrol /
detail
- ttcn3-asterisk: Enable debug in log file
—
Pau Espin Pedrol /
detail
- ttcn3-asterisk: Enable debug for pjproject
—
Pau Espin Pedrol /
detail
- asterisk: Enable capabilities required to set up ipsec
—
Pau Espin Pedrol /
detail
- ttcn3-asterisk: Update Asterisk_Tests.cfg to adapt to new AMI_Adapter
—
Pau Espin Pedrol /
detail
- asterisk: manager.conf: Give more permissions to AMI user
—
Pau Espin Pedrol /
detail
- asterisk: pjsip.conf: Mark templates accordingly
—
Pau Espin Pedrol /
detail
- ttcn3-asterisk: Configure new IMS ConnHdlr
—
Pau Espin Pedrol /
detail
- asterisk-master: Use pjproject from external git repo
—
Pau Espin Pedrol /
detail
- ttcn3-sgsn-test-sns: add missing symlink to osmo-stp.cfg
—
Vadim Yanitskiy /
detail
- ttcn3-sgsn-test: add missing SGSN_Tests_NS.control
—
Vadim Yanitskiy /
detail
- ttcn3-sgsn-test: add config files for running SNS testcases
—
Vadim Yanitskiy /
detail
- ttcn3-hnbgw: Apply latest changes to 'with-pfcp' scenario
—
Vadim Yanitskiy /
detail
- ttcn3-asterisk: Set Asterisk AMI IP address in Asterisk_Tests
—
Pau Espin Pedrol /
detail
- ttcn3-hnbgw: osmo-hnbgw.cfg: Switch from deprecated 'mgcp' node to 'mgw'
—
Pau Espin Pedrol /
detail
- ttcn3-hnbgw: osmo-hnbgw.cfg: Enable color in log file
—
Pau Espin Pedrol /
detail
- ttcn3-hnbgw: Set STATSVTY.CTRL_HOSTNAME to correct IP address
—
Pau Espin Pedrol /
detail
- ttcn3-asterisk: Configure AMI
—
Pau Espin Pedrol /
detail
- ttcn3-hnbgw: Set new mp_local_statsd_ip module paramter to correct IP
—
Pau Espin Pedrol /
detail
- {open5gs,osmo-uecups}-latest: don't hardcode UID
—
Oliver Smith /
detail
- debian-bookworm-obs-latest: add build user
—
Oliver Smith /
detail
- debian-bookworm-build: add libnftnl-dev
—
Oliver Smith /
detail
- scripts/kernel-test: do shallow fetch
—
Oliver Smith /
detail
- kernel-test/kernel-build: update net-next branch
—
Oliver Smith /
detail
- jenkins-common: fix_perms: chown files too
—
Oliver Smith /
detail
- scripts/kernel-test: put mknod commands in init.sh
—
Oliver Smith /
detail
- scripts/kernel-test: build initrd+kernel as user
—
Oliver Smith /
detail
- debian-bookworm-build: add virtualenv
—
Oliver Smith /
detail
- Introduce asterisk-master docker image
—
Pau Espin Pedrol /
detail
- Introduce ttcn3-asterisk-ims-ue-test
—
Pau Espin Pedrol /
detail
- */osmo-bsc.cfg: BTS type 'sysmobts' (deprecated) -> osmo-bts
—
Vadim Yanitskiy /
detail
- ttcn3-bsc-test-sccplite: osmo-bsc.cfg: remove deprecated 'mgw remote-ip'
—
Vadim Yanitskiy /
detail
- ttcn3-bts-test: fix start_config_oml(): do not start BSC
—
Vadim Yanitskiy /
detail
- ttcn3-*-test: set OSMO_SUT_{HOST,PORT} for more testsuites
—
Vadim Yanitskiy /
detail
- ttcn3-ggsn-test: ignore failure to kill osmo-ggsn
—
Oliver Smith /
detail
- ttcn3-bts-test: use start_config functions
—
Oliver Smith /
detail
- ttcn3-bts-test: abort if missing osmo-config-merge
—
Oliver Smith /
detail
- ttcn3-bts-test: add env var to not run all configs
—
Oliver Smith /
detail
- ttcn3-ggsn-test/jenkins: add functions for start ggsn/testsuite
—
Oliver Smith /
detail
- ttcn3-ggsn-test: move confgs to subdirs
—
Oliver Smith /
detail
- ttcn3-ggsn-test: run with multiple configurations
—
Oliver Smith /
detail
- openbts-umts: fix apt: use archive.debian.org
—
Vadim Yanitskiy /
detail
- debian-bookworm-build: add libbladerf-dev
—
Oliver Smith /
detail
- ttcn3-stp-test: enable M3UA-over-TCP testing for master
—
Vadim Yanitskiy /
detail
- ttcn3-epdg: Set up params to get GTP-U echo working
—
laforge /
detail
- ttcn3-epdg: Test GTP-U userplane
—
laforge /
detail
- ttcn3-ggsn-test: enable dynamic debug
—
Oliver Smith /
detail
- ttcn3-ggsn-test: tweak log options
—
Oliver Smith /
detail
- cosmetic: .txt file shouldn't have execute permissions set
—
laforge /
detail
- scripts/kernel-test: add /dev/null
—
Oliver Smith /
detail
- ttcn3-pgw-test: Configure open5gs-smfd S2b/S6b/P-CSCF related bits
—
Pau Espin Pedrol /
detail
- ttcn3-ggsn-test: kernel-gtp: add ipv6
—
Oliver Smith /
detail
- ttcn3-epdg: Create tun with iface name gtp0
—
Pau Espin Pedrol /
detail
- ttcn3-epdg: Give some time for osmo-epdg to start
—
Pau Espin Pedrol /
detail
- ttcn3-ggsn-test/fragment.config: add NET_NS, VETH
—
Oliver Smith /
detail
- epdg: Configure gtpu tunnel
—
Pau Espin Pedrol /
detail
- fixup: ttcn3-bts-test: do not start osmo-bts-virtual / virtphy
—
Vadim Yanitskiy /
detail
- ttcn3-bts-test: do not start osmo-bts-virtual / virtphy containers
—
Vadim Yanitskiy /
detail
- ttcn3-epdg: Run osmo-epdg with CAP_NET_ADMIN
—
Pau Espin Pedrol /
detail
- ttcn3-epdg: Add section to control logging
—
Pau Espin Pedrol /
detail
- osmo-epdg-master: Remove rebar.lock to force build against updated
—
Pau Espin Pedrol /
detail
- ttcn3-epdg: Set new osmo-epdg diameter connect/wathdog configs
—
Pau Espin Pedrol /
detail
- ttcn3-epdg: Update renamed config fields
—
Pau Espin Pedrol /
detail
- debian-{buster,bullseye}-jenkins: Add python3-cryptography from debian
—
laforge /
detail
- upgrade gerrit to 3.7.6
—
laforge /
detail
- ttcn3-msc-test: also execute ASCI (VBS/VGCS) testcases
—
Vadim Yanitskiy /
detail
- ttcn3-msc-test: set 'hlr' / 'ipa-name' explicitly
—
Vadim Yanitskiy /
detail
- mme: Use LAC from SGSN with most significat bit set to 0
—
Pau Espin Pedrol /
detail
- ttcn3-mme: Set log level of open5gs-mmed to debug
—
Pau Espin Pedrol /
detail
- ttcn3-pcu-test: set PCUIFv12 for both -master and -latest
—
Vadim Yanitskiy /
detail
- ttcn3-bts-test: set PCUIFv12 for both -master and -latest
—
Vadim Yanitskiy /
detail
- ttcn3-pcu-test/sns: fix PCUIF version number (follow up patch)
—
pmaier@sysmocom.de /
detail
- Revert "ttcn3-pcu-test/sns: fix PCUIF version number"
—
pmaier@sysmocom.de /
detail
- ttcn3-pcu-test/sns: fix PCUIF version number
—
pmaier@sysmocom.de /
detail
- open5gs configs: duplicate cfgs for latest/master
—
Oliver Smith /
detail
- open5gs configs: update to current format
—
Oliver Smith /
detail
- open5gs configs: remove comments
—
Oliver Smith /
detail
- ttcn3-bts/pcu-test: Use PCUIF v12 for current master and PCUIF v11 for
—
pmaier@sysmocom.de /
detail
- Use 2023q1 osmo-ttcn3-hacks branch for 2023q1 SUTs
—
laforge /
detail
- ttcn3-dia2gsup-test/osmo_dia2gsup: set connect timer to 200 ms
—
lynxis /
detail
- ttcn3-hnbgw-test: reduce X31 to 5s
—
Oliver Smith /
detail
- ttcn3-hnbgw: Use new module param mp_hnbgw_timer_x31
—
Oliver Smith /
detail
- redmine: run 'apt upgrade' in Dockerfile to get glibc fix from Debian
—
laforge /
detail
- sigtran-tests: Add note on why this is still using buster
—
laforge /
detail
- ttcn3-epdg: Configure S6b interface
—
Pau Espin Pedrol /
detail
- ttcn3-epdg-test: Update config file to set up GTPv2C socket
—
Pau Espin Pedrol /
detail
- Introduce osmo-epdg-master
—
Pau Espin Pedrol /
detail
- Introduce ttcn3-epdg-test
—
Pau Espin Pedrol /
detail
- debian-bookworm-erlang: use debian's rebar3
—
Oliver Smith /
detail
- common/ttcn3-docker-run.sh: add TEST_NAME env var
—
Oliver Smith /
detail
- open5gs-latest: Support debian bookworm
—
Pau Espin Pedrol /
detail
- Introduce ttcn3-hss-test-ogs
—
Pau Espin Pedrol /
detail
- ttcn3-hss-test-ogs: Adapt mongodb db setup to pass new test
—
Pau Espin Pedrol /
detail
- debian-bookworm-titan: add ccache
—
Oliver Smith /
detail
- open5gs-master: Make mongodb available in the image
—
Pau Espin Pedrol /
detail
- open5gs-master: Install open5gs-dbctl to /usr/bin
—
Pau Espin Pedrol /
detail
- open5gs-master: Fix indentation
—
Pau Espin Pedrol /
detail
- ttcn3-pcu-test: use PFUIF v10 for 2023q1
—
Oliver Smith /
detail
- Fix osmo_dia2gsup-master not pulling in debian-bookworm-erlang dep image
—
Pau Espin Pedrol /
detail
- make/Makefile: update DISTRO, UPSTREAM_DISTRO
—
Oliver Smith /
detail
- ttcn3-mme: Fix missing IP/port config for S11 interface
—
Pau Espin Pedrol /
detail
- ttcn3-bts: Use PCUIF v11
—
laforge /
detail
- ttcn3-hnbgw: Update config files for latest after osmo-hnbgw new release
—
laforge /
detail
- gerrit: update to 3.6.6
—
laforge /
detail
- gerrit: upgrade to 3.7.4
—
laforge /
detail
- ttcn3-dia2gsup: Avoid retrieving unexisting talloc report
—
Pau Espin Pedrol /
detail
- dia2gsup: Fix logfile name
—
Pau Espin Pedrol /
detail
- Introduce osmo-dia2gsup-master, ttcn3-dia2gsup-test
—
Pau Espin Pedrol /
detail
- debian-*-erlang: Install libsctp to enable sctp support in erlang apps
—
Pau Espin Pedrol /
detail
- debian-bookworm-build: add curl
—
Oliver Smith /
detail
- debian-bookworm-build: add libnftables-dev
—
Oliver Smith /
detail
- debian-bookworm-build: inkscape -> librsvg2-bin
—
Oliver Smith /
detail
- fpga-build: use debian-bookworm-build
—
Oliver Smith /
detail
- release-tarball-build-dist: remove
—
Oliver Smith /
detail
- Cosmetic: debian-buster-jenkins: update comment
—
Oliver Smith /
detail
- debian-bookworm-titan{,-master}: new containers
—
Oliver Smith /
detail
- ttcn3: use debian-bookworm-titan
—
Oliver Smith /
detail
- hnbgw: fixup: with-pfcp cfg: missing 'pfcp' section
—
Neels Hofmeyr /
detail
- hnbgw: fixup: with-pfcp cfg: set missing x26 timer
—
Neels Hofmeyr /
detail
- ttcn3-hnbgw-latest: fixup for cnpool: bind CTRL to 0.0.0.0
—
Neels Hofmeyr /
detail
- hnbgw: fixup for cnpool: fix ASP IP addresses in osmo-stp.cfg
—
Neels Hofmeyr /
detail
- hnbgw: fixup for cnpool: re-add lost MGCP cfg
—
Neels Hofmeyr /
detail
- hnbgw: fixup: adjust with-pfcp cfg like without-pfcp
—
Neels Hofmeyr /
detail
- hnbgw: tweak log
—
Neels Hofmeyr /
detail
- hnbgw-latest: fixup for cnpool: use correct osmo-stp.cfg file name
—
Neels Hofmeyr /
detail
- hnbgw-latest: fixup for cnpool: use correct cfg file name
—
Neels Hofmeyr /
detail
- hnbgw: fixup for cnpool: bind CTRL to 0.0.0.0
—
Neels Hofmeyr /
detail
- hnbgw: adjust cfg for cnpool tests
—
Neels Hofmeyr /
detail
- ttcn3-mme-test-ogs: configure Gn interface
—
pmaier@sysmocom.de /
detail
- debian-bookworm-build{,-arm}: fix temp dir removal
—
Oliver Smith /
detail
- osmo-uecups-master: make osmocom user avilable
—
laforge /
detail
- debian-bullseye-titan-*/Dockerfile: Replace inetutils-ping with
—
laforge /
detail
- ttcn3-hnbgw: fix disabling talloc report checks for hnbgw-latest
—
Pau Espin Pedrol /
detail
- scripts/kernel-test: add KERNEL_SKIP_REBUILD
—
Oliver Smith /
detail
- scripts/kernel-test: add KERNEL_SKIP_SMOKE_TEST
—
Oliver Smith /
detail
- kernel_test_prepare: use $DOCKER_ARGS
—
Oliver Smith /
detail
- open5gs-master: useradd: don't hardcode uid
—
Oliver Smith /
detail
- open5gs-master: drop unknown option metrics_impl
—
Oliver Smith /
detail
- open5gs-master: use DISTRO variable
—
Oliver Smith /
detail
- Cosmetic: ttcn3-ggsn-test: env vars -> README
—
Oliver Smith /
detail
- hnbgw: Skip asn1 talloc mem checks in osmo-hnbgw-latest
—
Pau Espin Pedrol /
detail
- scripts/kernel-test: fixup for initrd_add_file
—
Oliver Smith /
detail
- scripts/kernel-test: adjust to usr-merge
—
Oliver Smith /
detail
- scripts/kernel-test/run-qemu: set init=/init
—
Oliver Smith /
detail
- scripts/kernel-test/run-qemu: update qemu args
—
Oliver Smith /
detail
- osmo-uecups-master: remove useradd
—
Oliver Smith /
detail
- jenkins-common: add + set default: debian bookworm
—
Oliver Smith /
detail
- debian-bookworm-build(-arm): new docker containers
—
laforge /
detail
- debian-bookworm-erlang: new docker container
—
laforge /
detail
- debian-bookworm-obs-latest: new container
—
laforge /
detail
- adjust HNBGW_Tests.cfg to changed HNBGW_Tests.ttcn
—
Neels Hofmeyr /
detail
- Install liburing-dev in jenkins and build containers
—
laforge /
detail
- debian-bullseye-jenkins: add libcdk5-dev
—
Oliver Smith /
detail
- MME_Tests: add docker tests for MME
—
Pau Espin Pedrol /
detail
- ttcn3-bts-test/jenkins.sh: set mp_pcuif_version
—
laforge /
detail
- */osmo-stp.cfg: Explicitly define role & sctp-role
—
Pau Espin Pedrol /
detail
- redmine: fix auto-scan of repositories
—
Oliver Smith /
detail
- ttcn3-bts-test: fix config merge caching problem
—
Oliver Smith /
detail
- Explicitly configure ASPs asp-clnt-* as role=asp & sctp-role=client
—
Pau Espin Pedrol /
detail
- stp: Expand osmo-stp.cfg for "norctx" tests
—
laforge /
detail
- ttcn3-ggsn: Speed up tests by lowering retransmission T3,N3 timers
—
Pau Espin Pedrol /
detail
- debian-bullseye-jenkins: add iproute2
—
Oliver Smith /
detail
- ttcn3-bts-test: enable running GPRS related tests with trxcon
—
Vadim Yanitskiy /
detail
- debian-bullseye-jenkins: sync with buster-jenkins
—
Oliver Smith /
detail
- debian-bullseye-jenkins-arm: add new container
—
Oliver Smith /
detail
- README: add example: nightlies from different date
—
Oliver Smith /
detail
- debian-buster-jenkins: add ghostscript
—
Oliver Smith /
detail
- docker kill: wait until containers are stopped
—
Oliver Smith /
detail
- Introduce debian-bullseye-titan-master
—
Pau Espin Pedrol /
detail
- ttcn3-ggsn-test-ogs: update open5gs-{smf,upf} config files
—
Vadim Yanitskiy /
detail
- ttcn3-pgw-test: make the testsuite dir writable by all users
—
Vadim Yanitskiy /
detail
- ttcn3-pgw-test: update open5gs-{nrf,smf,upf} config files
—
Vadim Yanitskiy /
detail
- osmo-uecups-latest: install missing iputils-ping
—
Vadim Yanitskiy /
detail
- open5gs-latest: install missing packages for ttcn3-pgw-test
—
Vadim Yanitskiy /
detail
- open5gs-master: fix comment in Dockerfile
—
Vadim Yanitskiy /
detail
- open5gs-latest: add osmocom user for ttcn3-pgw-test
—
Vadim Yanitskiy /
detail
- debian-bullseye-*: apt-key is deprecated, use [signed-by] instead
—
Vadim Yanitskiy /
detail
- osmo-uecups-latest: new Dockerfile
—
Vadim Yanitskiy /
detail
- ttcn3-pgw-test: allow using osmo-uecups from the latest feed
—
Vadim Yanitskiy /
detail
- upgrade to gerrit 3.6.3
—
laforge /
detail
- ttcn3-bsc-test: sleep 1s before starting testsuite
—
Oliver Smith /
detail
- release-tarball: support git submodules
—
Oliver Smith /
detail
- release-tarball: fix osmo-trx 1.5.0
—
Oliver Smith /
detail
- release-tarball: remove PARALLEL_MAKE variable
—
Oliver Smith /
detail
- release-tarball: add var to use list from jenkins
—
Oliver Smith /
detail
- release-tarball: add libosmo-pfcp, libgtpnl
—
Oliver Smith /
detail
- release-tarball: add missing cd /build
—
Oliver Smith /
detail
- ttcn3-*: Update test setup after Osmocom CNI release 202302
—
Pau Espin Pedrol /
detail
- jenkins-common.sh: open5gs-latest does not require debian-bullseye-build
—
Vadim Yanitskiy /
detail
- FR testsuites: clean up all networks before start
—
Oliver Smith /
detail
- debian-buster-jenkins-arm: new image
—
Oliver Smith /
detail
- ttcn3-bts-test: replace subnets during 'make cfg'
—
Oliver Smith /
detail
- debian-buster-jenkins: install ccache
—
Oliver Smith /
detail
- kernel_test_wait_for_vm: increase timeout to 15s
—
Oliver Smith /
detail
- network_create: set NET_NAME after next SUBNET
—
Oliver Smith /
detail
- jenkins-common: replace subnet in scm files too
—
Oliver Smith /
detail
- network_create: put SUBNET in NET_NAME
—
Oliver Smith /
detail
- network_create: find free subnet automatically
—
Oliver Smith /
detail
- ttcn3-*/jenkins*.sh: use $SUBNET everywhere
—
Oliver Smith /
detail
- */Dockerfile: clone from gerrit.osmocom.org using https://
—
Vadim Yanitskiy /
detail
- ttcn3-upf-test: fetch /tmp/commit from gerrit, not from cgit
—
Vadim Yanitskiy /
detail
- jenkins-common: tweak echo messages
—
Oliver Smith /
detail
- ttcn3-ggsn-test: cp initrd-ggsn.sh to VOL_BASE_DIR
—
Oliver Smith /
detail
- scripts/regen_doc: use SUBNET variable
—
Oliver Smith /
detail
- *-repo-install-test: remove
—
Oliver Smith /
detail
- ttcn3-docker-run.sh: Use interface "up" flag, not operstate
—
laforge /
detail
- osmo-gsm-tester: fix getting latest commit
—
Oliver Smith /
detail
- release-tarball-build-dist: order install pkgs
—
Oliver Smith /
detail
- release-tarball-build-dist: move rsync into docker
—
Oliver Smith /
detail
- release-tarball-build-dist: check exists on server
—
Oliver Smith /
detail
- release-tarball-build-dist: fix missing dir crash
—
Oliver Smith /
detail
- release-tarball-build-dist: fix permission errors
—
Oliver Smith /
detail
- upgrade gerrit to 3.4.8
—
laforge /
detail
- ttcn3-{pgw,ggsn}-test: Update smf.yml with new metrics section location
—
Pau Espin Pedrol /
detail
- ttcn3-pgw-test: update freeDiameter-smf.conf
—
Vadim Yanitskiy /
detail
- ttcn3-ggsn-test-ogs: update freeDiameter-smf.conf
—
Vadim Yanitskiy /
detail
- open5gs-latest: migrate from debian:buster to debian:bullseye
—
Vadim Yanitskiy /
detail
- hnbgw: Only build with_pfcp on master
—
daniel /
detail
- debian-buster-jenkins: add more pysim related deps
—
Oliver Smith /
detail
- ttcn3-bsc-test: Fix ttcn3-bsc_sccplite-latest
—
dwillmann /
detail
- debian-buster-jenkins: add pysim doc/lint depends
—
Oliver Smith /
detail
- ttcn3-bsc: Update osmo-bsc cfg files to use mgw pooling VTY commands
—
Pau Espin Pedrol /
detail
- debian-buster-jenkins: skip llvm for arch !x86_64
—
Oliver Smith /
detail
- Revert "debian-buster-build: add LLVMEmbeddedToolchainForArm"
—
Oliver Smith /
detail
- debian-buster-jenkins: order pkgs alphabetically
—
Oliver Smith /
detail
- debian-buster-jenkins: add LLVMEmbeddedToolchainForArm
—
Oliver Smith /
detail
- debian-buster-build: order pkgs alphabetically
—
Oliver Smith /
detail
- debian-buster-build: add LLVMEmbeddedToolchainForArm
—
Oliver Smith /
detail
- ttcn3-mgw: Increase number of enpoints in osmo-mgw.cfg
—
Pau Espin Pedrol /
detail
- ttcn3-mgw: jenkins.sh Fix centos tests
—
Pau Espin Pedrol /
detail
- ttcn3-mgw: Set osmux bind-ip(-v6) VTY configs
—
Pau Espin Pedrol /
detail
- ttcn3-pcu-test: osmo-pcu.cfg: use 'gsmtap-category enable-all'
—
Vadim Yanitskiy /
detail
- ttcn3-pcu-test: osmo-pcu.cfg: use 'gsmtap-remote-host'
—
Vadim Yanitskiy /
detail
- .gitignore vim swp files
—
Neels Hofmeyr /
detail
- add osmo-upf-master
—
Neels Hofmeyr /
detail
- add ttcn3-upf-test
—
Neels Hofmeyr /
detail
- ttcn3-hnbgw: Set different junit xml file name prefix for with-pfcp
—
Pau Espin Pedrol /
detail
- ttcn3-hnbgw: sed junit file in the clean_up trap
—
Pau Espin Pedrol /
detail
- Use gerrit as osmo-ttcn3-hacks.git git remote
—
Pau Espin Pedrol /
detail
- add ttcn3-hnbgw-test variant with-pfcp
—
Neels Hofmeyr /
detail
- osmo-hnbgw-master: build with --enable-pfcp
—
Neels Hofmeyr /
detail
- ttcn3-bts: Add osmux configurations
—
Pau Espin Pedrol /
detail
- ttcn3-hnbgw: Enable gsmtap logging
—
Pau Espin Pedrol /
detail
- osmo-bts-master: Depend on libosmo-netif
—
Pau Espin Pedrol /
detail
- debian-bullseye-titan: Discontinue the use of git://
—
laforge /
detail
- debian-bullseye-titan: Use gitea, not obsolete cgit
—
laforge /
detail
- ttcn3-bsc: Enable OSMUX feature in osmo-bts-omldummy
—
Pau Espin Pedrol /
detail
- osmo-hlr-master: install libsqlite3-dev/sqlite-devel
—
Vadim Yanitskiy /
detail
- osmo-msc-master: install libsqlite3-dev/sqlite-devel
—
Vadim Yanitskiy /
detail
- fix_perms: use debian:bullseye
—
Oliver Smith /
detail
- ttcn3-cbc: Update osmo-cbc.cfg, CBC_Tests.cfg to latest ttcn3 testsuite
—
Pau Espin Pedrol /
detail
- osmo-hnodeb-latest: new container
—
Oliver Smith /
detail
- ttcn3-cbc: Adapt ports in osmo-cbc.git to default ttcn3 ones
—
Pau Espin Pedrol /
detail
- ttcn3-cbc: Disable gsmtap_log debug for dasn1c category
—
Pau Espin Pedrol /
detail
- ttcn3-cbc: Set mode server in osmo-cbc.cfg
—
Pau Espin Pedrol /
detail
- ttcn3-cbc: Adapt osmo-cbc 'peer' node to new format
—
Pau Espin Pedrol /
detail
- ttcn3-cbc: Reorder osmo-cbc.cfg nodes
—
Pau Espin Pedrol /
detail
- osmo-cbc-master: Fix missing ldconfig
—
Pau Espin Pedrol /
detail
- ttcn3-cbc: Update osmo-cbc.cfg to test SBc-AP
—
Pau Espin Pedrol /
detail
- ttcn3-cbc: Enable gsmtap log
—
Pau Espin Pedrol /
detail
- debian-bullseye-jenkins: new container
—
Oliver Smith /
detail
- debian11-repo-install-test: add container
—
Oliver Smith /
detail
- Remove several unused containers
—
Oliver Smith /
detail
- release-tarball-build-dist/Makefile: update
—
Oliver Smith /
detail
- */.release: remove
—
Oliver Smith /
detail
- release-tarball-build-dist: upgrade from debian 9
—
Oliver Smith /
detail
- release-tarball-build-dist: move osmo-ci code here
—
Oliver Smith /
detail
- osmo-gsm-tester: use debian's soapysdr-module-lms7
—
Oliver Smith /
detail
- debian-stretch-jenkins: add apt-transport-https
—
Oliver Smith /
detail
- Install ca-certificates before Osmocom repo
—
Oliver Smith /
detail
- Use Osmocom OBS
—
Oliver Smith /
detail
- cgit: fix Atom feed hostname from localhost to cgit.osmocom.org
—
laforge /
detail
- cgit: Fix Atom feed scheme from http to https
—
laforge /
detail
- add debian-sid-jenkins
—
Neels Hofmeyr /
detail
- make: Allow passing OSMO_CBC_BRANCH to docker
—
Pau Espin Pedrol /
detail
- debian-bullseye-titan: Update libfftranscode 0.3->0.5
—
Pau Espin Pedrol /
detail
- gerrit: update to 3.4.5
—
laforge /
detail
- cgit: more verbose logging format in access.log
—
laforge /
detail
- ttcn3-bsc-test/jenkins-sccplite.sh: configure 4 TRX for BTS2
—
Vadim Yanitskiy /
detail
- ttcn3-bsc-test/jenkins-sccplite.sh: fix missing osmo-bts-omldummy logs
—
Vadim Yanitskiy /
detail
- open5gs: Enable libmetrics prometheus implementation
—
Pau Espin Pedrol /
detail
- ttcn3-bsc-test-sccplite/osmo-bsc.cfg: configure 3 additional TRX
—
Vadim Yanitskiy /
detail
- ttcn3-bsc-test/osmo-bsc.cfg: configure 3 additional TRX instances for
—
Vadim Yanitskiy /
detail
- jenkins-common: docker_depends: add open5gs
—
Oliver Smith /
detail
- common/Release.key: update
—
Oliver Smith /
detail
- osmo-bsc.cfg: change logging level nm info -> notice
—
Vadim Yanitskiy /
detail
- common/Release.key: update
—
Oliver Smith /
detail
- */Dockerfile: drop MAINTAINER line
—
Oliver Smith /
detail
- osmocom-bb-host-master: modernize
—
Oliver Smith /
detail
- debian-bullseye-build: add libmnl-dev
—
Oliver Smith /
detail
- ttcn3-bsc-test: set osmo-bts-omldummy features
—
Oliver Smith /
detail
- ttcn3-ggsn-test-ogs: set CAP_NET_RAW for open5gs-upfd
—
Pau Espin Pedrol /
detail
- debian-buster-jenkins: install libelf-dev
—
laforge /
detail
- ttcn3-pgw: Configure Gy interface
—
Pau Espin Pedrol /
detail
- ttcn3-bsc-test/osmo-bsc.cfg: set AMR link adaptation params
—
Vadim Yanitskiy /
detail
- Revert "osmo-bsc-{master,latest}/osmo-bsc.cfg: set AMR link adaptation
—
Vadim Yanitskiy /
detail
- osmo-bsc-{master,latest}/osmo-bsc.cfg: set AMR link adaptation params
—
Vadim Yanitskiy /
detail
- open5gs-latest: fix Dockerfile: avoid using curl for downloading keys
—
Vadim Yanitskiy /
detail
- ttcn-pgw-test: Improve osmo-uecups cfg file
—
Pau Espin Pedrol /
detail
- ttcn-ggsn: Configure open5gs-smfd to connect to TTCN3 OCS
—
Pau Espin Pedrol /
detail
- make: Allow passing OSMO_UECUPS_BRANCH
—
Pau Espin Pedrol /
detail
- ttcn3-pgw: Pass config file to osmo-uecups
—
Pau Espin Pedrol /
detail
- ttcn3-pgw: Parallel docker container stop
—
Pau Espin Pedrol /
detail
- ttcn3-ggsn-ogs: Rename config files
—
Pau Espin Pedrol /
detail
- ttcn3-pgw-test: Log stdout to find crashes
—
Pau Espin Pedrol /
detail
- ttcn3-pgw-test: Use process name in log file
—
Pau Espin Pedrol /
detail
- ttcn3-{pgw,ggsn}-tests: Add comment with procedure to get open5gs-smfd
—
Pau Espin Pedrol /
detail
- ttcn3-pgw-tests: use same bootstrap for upfd as in ttcn-ggsn-tests-ogs
—
Pau Espin Pedrol /
detail
- ttcn3-pgw-test: Log open5gs-nrfd stdout/stderr
—
Pau Espin Pedrol /
detail
- ttcn3-{ggsn,pgw}-test: Avoid open5gs itself logging to a file
—
Pau Espin Pedrol /
detail
- gr-gsm-master: migrate from archlinux to debian-bullseye-build
—
Vadim Yanitskiy /
detail
- ttcn3-ggsn-ogs: Use new bind_dev config option for GTP sockets
—
Pau Espin Pedrol /
detail
- ttcn3-ggsn-ogs: Change diameter node id to pcrf
—
Pau Espin Pedrol /
detail
- centos8-repo-install-test: set UPSTREAM_DISTRO=almalinux:8 in Makefile
—
Vadim Yanitskiy /
detail
- debian-*-jenkins: git clone from gerrit
—
Oliver Smith /
detail
- ttcn3-ggsn: Modify configs to alloc bigger IPv4 pools
—
Pau Espin Pedrol /
detail
- ttcn3-fr-test/jenkins.sh: revert docker run --rm
—
Oliver Smith /
detail
- ttcn3-fr-test/jenkins.sh: make use of clean_up()
—
Oliver Smith /
detail
- ttcn3-ggsn-test-ogs: Run all tests
—
Pau Espin Pedrol /
detail
- Add ttcn3-hnbgw-test docker container
—
dwillmann /
detail
- osmo-hnbgw-master: Fix build dependencies
—
dwillmann /
detail
- Remove debian-buster-erlang
—
Pau Espin Pedrol /
detail
- debian-bullseye-erlang: Build rebar3 from source
—
Pau Espin Pedrol /
detail
- Add debian-bullseye-erlang docker image
—
Pau Espin Pedrol /
detail
- treewide: fix missing --rm for "docker run"
—
Oliver Smith /
detail
- make/Makefile: always use docker run --rm
—
Oliver Smith /
detail
- common/pipework: deduplicate
—
Oliver Smith /
detail
- ttcn3-ggsn-tests-ogs: Set correct DNS address to get ping working
—
Pau Espin Pedrol /
detail
- ttcn3-ggsn-tests-ogs: Configuration fixes for IPv6 tests
—
Pau Espin Pedrol /
detail
- make/Makefile: allow overriding '-it' for target 'run'
—
Vadim Yanitskiy /
detail
- ttcn3-bts-test: use osmo-config-merge to generate config files
—
Vadim Yanitskiy /
detail
- ttcn3-bts-test: move generic config files into a directory
—
Vadim Yanitskiy /
detail
- ttcn3-ggsn-test-ogs: Configure correct GTP-U GGSN address
—
laforge /
detail
- make/Makefile: generalize passing additional build arguments
—
Vadim Yanitskiy /
detail
- open5gs-master: install dependencies using apt-get build-dep
—
Vadim Yanitskiy /
detail
- open5gs-master: ensure consistent install paths with '-latest'
—
Vadim Yanitskiy /
detail
- fixup: debian-bullseye-titan: run 8 parallel jobs for 'make deps'
—
Vadim Yanitskiy /
detail
- Add ttcn3-ggsn-ogs testsuite
—
Pau Espin Pedrol /
detail
- debian-bullseye-titan: run 8 parallel jobs for 'make deps'
—
Vadim Yanitskiy /
detail
- debian-{bullseye,buster,jessie}-build: install 'equivs' package
—
Vadim Yanitskiy /
detail
- open5gs-master: migrate to debian-bullseye-build
—
Vadim Yanitskiy /
detail
- debian-stretch-jenkins: install libelf-dev
—
Oliver Smith /
detail
- make: Add OPEN5GS_BRANCH build arg
—
Pau Espin Pedrol /
detail
- ttcn3-pgw-test: configure the 'ogstun' device for open5gs-upfd
—
Vadim Yanitskiy /
detail
- open5gs-master: remove both setup.sh and pgw.sh
—
Vadim Yanitskiy /
detail
- ttcn3-pgw-test: make osmo-uecups-daemon more verbose
—
Vadim Yanitskiy /
detail
- osmo-uecups-master: install iputils-ping for ttcn3-pgw-test
—
Vadim Yanitskiy /
detail
- ttcn3-pgw-test: set PGW_Tests.mp_run_prog_log_path to '/data'
—
Vadim Yanitskiy /
detail
- treewide: use almalinux instead of centos8
—
laforge /
detail
- ttcn3-bsc-test-vamos: set OSMO_SUT_{HOST,PORT}
—
Vadim Yanitskiy /
detail
- ttcn3-bsc-test-sccplite: set OSMO_SUT_{HOST,PORT}
—
Vadim Yanitskiy /
detail
- ttcn3-pgw-test: fix jenkins.sh: do not use bash specific syntax
—
Vadim Yanitskiy /
detail
- ttcn3-pgw-test: add Dockerfile, jenkins.sh and configs for open5gs
—
Vadim Yanitskiy /
detail
- ttcn3-pgw-test: set '--ulimit core=-1' for open5gs-{nrf,upf,smf}
—
Vadim Yanitskiy /
detail
- ttcn3-pgw-test: set '--ulimit core=-1' for osmo-uecups-daemon
—
Vadim Yanitskiy /
detail
- osmo-uecups-master/Dockerfile: fix copy-pasted ARG OSMO_BSC_BRANCH
—
laforge /
detail
- osmo-uecups-master: add more complete osmo-uecups-daemon.cfg
—
laforge /
detail
- ttcn3-bsc-test/jenkins.sh: fix '--ulimit core=-1' set twice
—
laforge /
detail
- gerrit: upgrade to 3.3.9 based container
—
laforge /
detail
- gerrit: Upgrade to 3.4.3
—
laforge /
detail
- Use osmo-hnbgw from osmo-hnbgw.git instead of osmo-iuh.git
—
Pau Espin Pedrol /
detail
- osmo-hnodeb-master: no longer depend on libgtp
—
Pau Espin Pedrol /
detail
- osmo-remsim-test-latest: install client-shell
—
laforge /
detail
- jenkins-common.sh: add d9 to upstream_distro func
—
Oliver Smith /
detail
- scripts/kernel-test/run-qemu.sh: update qemu args
—
Oliver Smith /
detail
- osmo-ggsn-*: install iproute2 for kernel tests
—
Oliver Smith /
detail
- debian-bullseye-titan: sort pkgs alphabetically
—
Oliver Smith /
detail
- debian-bullseye-titan: install ping
—
Oliver Smith /
detail
- Add Dockerfile for OpenBTS-UMTS
—
Vadim Yanitskiy /
detail
- debian-bullseye-obs-latest: new image
—
Oliver Smith /
detail
- titan: move from debian-stetch-titan to debian-bullseye-titan
—
laforge /
detail
- Switch ttcn3-* master tests from Debian stretch to bullseys
—
laforge /
detail
- nplab: Switch from stretch to buster
—
laforge /
detail
- sctp-test: Upgrade to bullseye
—
Oliver Smith /
detail
- jenkins-common.sh: non-jenkins: unique build tag
—
Oliver Smith /
detail
- nplab-*test: Fix printing of junit on stdout
—
laforge /
detail
- sync debian-buster-build with debian-stretch-build
—
laforge /
detail
- Add debian-bullseye-build container
—
laforge /
detail
- debian-{buster,stretch}-*: Explicitly specify DISTRO variables
—
laforge /
detail
- bsc-test: Reduce log verbosity of osmo-stp
—
laforge /
detail
- osmo-remsim-latest: fix apt install command
—
Oliver Smith /
detail
- osmo-remsim-latest: add logic for centos pkgs
—
Oliver Smith /
detail
- hnodeb: Update Dockerfile, configs with new deps, configs
—
Pau Espin Pedrol /
detail
- ttcn3-{sgsn,ggsn}-test: set OSMO_SUT_{HOST,PORT}
—
Vadim Yanitskiy /
detail
- ttcn3-bts-test/osmo-bts.cfg: use default {fn,rts}-advance values
—
laforge /
detail
- debian-stretch-build-dist: add python3-nwdiag
—
Oliver Smith /
detail
- osmo-pcap-master: doesn't need libosmo-netif
—
Oliver Smith /
detail
- osmo-pcap-latest: fix install path for centos
—
Oliver Smith /
detail
- debian-stretch-build-dist: osmo-gsm-manuals deps
—
Oliver Smith /
detail
- debian-stretch-build-dist: osmo-hnodeb deps
—
Oliver Smith /
detail
- debian-stretch-build-dist: osmo-pcap deps
—
Oliver Smith /
detail
- debian-stretch-build-dist: osmo-remsim deps
—
Oliver Smith /
detail
- debian-stretch-build-dist: osmo-uecups deps
—
Oliver Smith /
detail
- Add centos7 containers
—
laforge /
detail
- osmo-pcap-latest: fix typo in Dockerfile: s/clint/client/
—
Vadim Yanitskiy /
detail
- jenkins-common.sh: fix redundant titan image build
—
Oliver Smith /
detail
- jenkins-common.sh: pull registry.osmocom.org imgs
—
Oliver Smith /
detail
- Revert "osmocom-bb-host-master: install python-enum as fake_trx
—
Vadim Yanitskiy /
detail
- ttcn3-msc-test/osmo-msc.cfg: remove deprecated 'periodic location
—
Vadim Yanitskiy /
detail
- ttcn3-msc-test/osmo-msc.cfg: disable encryption for UTRAN
—
Vadim Yanitskiy /
detail
- open5gs-latest: fix Dockerfile: remove custom mirror list
—
Vadim Yanitskiy /
detail
- Revert "osmo-msc-latest: centos8: add libdbi-dbd-sqlite"
—
Vadim Yanitskiy /
detail
- ttcn3-sccp-test/jenkins.sh: fix typo
—
Oliver Smith /
detail
- ttcn3-{bts,bsc,msc,hlr}-test: set OSMO_SUT_{HOST,PORT}
—
Vadim Yanitskiy /
detail
- debian-stretch-titan/Dockerfile: install osmo-python-tests
—
Vadim Yanitskiy /
detail
- redmine: process changelogs every 10 minutes
—
Oliver Smith /
detail
- ttcn3: write Osmocom repository to configs
—
Oliver Smith /
detail
- Introduce Docker image for osmo-hnodeb-master
—
Pau Espin Pedrol /
detail
- Introduce Docker image for ttcn-hnodeb-test
—
Pau Espin Pedrol /
detail
- make/Makefile: allow specifying optional command for 'run'
—
Vadim Yanitskiy /
detail
- open5gs-latest: new Dockerfile for latest open5gs from packages
—
Vadim Yanitskiy /
detail
- open5gs-master: there is no 'master' anymore, use 'main'
—
Vadim Yanitskiy /
detail
- open5gs-master: add missing dependencies
—
Vadim Yanitskiy /
detail
- ttcn3-stp-test: do not set mp_osmo_stp_newer_than_1_4_0
—
Vadim Yanitskiy /
detail
- ttcn3-bsc-test: Leave mp_enable_dyn_sdcch8_test enabled in latest
—
Pau Espin Pedrol /
detail
- ttcn3-sgsn: latest osmo-sgsn release supports RIM
—
Pau Espin Pedrol /
detail
- ttcn3-sip: Don't force mncc version 7 for latest
—
Pau Espin Pedrol /
detail
- ttcn3-pcu: Update config for latest after new osmo-pcu release
—
Pau Espin Pedrol /
detail
- ttcn3-stp: osmo-stp in master is >1.4.0 now
—
Pau Espin Pedrol /
detail
- ttcn3-sip-test: use MNCCv7 for the '-latest' SUT
—
Vadim Yanitskiy /
detail
- upgrade to redmine 4.1
—
laforge /
detail
- redmine: upgrade to 4.2
—
laforge /
detail
- upgrade gerrit to 3.2.12
—
laforge /
detail
- ttcn3-ns-test-fr: fix wrong NS dialect
—
lynxis /
detail
- ttcn3-ns-test-fr: set correct ns configuration to match tests
—
lynxis /
detail
- ttcn3-ns-test: add second NSVC to allow TC_tx_blocked_foreign_nsvc to
—
lynxis /
detail
- ttcn3-pcu: use new Neighbor Address Resolution interface in master
—
Pau Espin Pedrol /
detail
- ttcn3-ns-test: add second NSVC to allow SNS tests to work
—
lynxis /
detail
- ttcn3-ns-test-sgsn-sns: add test run for ns sgsn role with sns
—
lynxis /
detail
- osmo-mgw.cfg: configure control interface
—
pmaier@sysmocom.de /
detail
- ttcn3-stp-test: rename mp_stp_has_asp_quirk
—
Oliver Smith /
detail
- osmo-mgw: add missing statsd configuration
—
pmaier@sysmocom.de /
detail
- ttcn3-pcu-test: add mp_osmo_pcu_newer_than_0_9_0
—
Oliver Smith /
detail
- ttcn3-pcap-client-test: set vty port to 4227
—
Oliver Smith /
detail
- MGCP_Test: set STATSVTY.CTRL_HOSTNAME
—
laforge /
detail
- debian-stretch-titan: Wait for interface to be _up_ not just its
—
dwillmann /
detail
- ttcn3-bsc: Disable dyn TS SDCCH8 tests for latest
—
Pau Espin Pedrol /
detail
- ttcn3-bsc: Drop mp_enable_osmux_test
—
Pau Espin Pedrol /
detail
- ttcn3-bts-test: set bind address for the RTP Emulation
—
Vadim Yanitskiy /
detail
- jenkins-common.sh: add NO_LIST_OSMO_PACKAGES
—
Oliver Smith /
detail
- Revert "ttcn3-bsc-test: enable A5/4 support in osmo-bsc.cfg"
—
Oliver Smith /
detail
- jenkins-common.sh: add image_suffix_is_master()
—
Vadim Yanitskiy /
detail
- ttcn3-bsc-test: enable A5/4 support in osmo-bsc.cfg
—
Vadim Yanitskiy /
detail
- bts-oml: Set mp_pcu_socket
—
Pau Espin Pedrol /
detail
- Don't run "dpkg --add-architecture i386" on ARM
—
Oliver Smith /
detail
- debian-stretch-jenkins: install libcdk5-dev
—
Oliver Smith /
detail
- add ttcn3-bsc-test-vamos
—
Neels Hofmeyr /
detail
- ttcn3-bts-test/BTS_Tests.cfg: execute VAMOS specific test cases
—
Vadim Yanitskiy /
detail
- ttcn3-gbproxy-test*: Update gbproxy NS timers
—
dwillmann /
detail
- jenkins-common.sh: add image_suffix_is_latest
—
Oliver Smith /
detail
- ttcn3-sgsn-test: fix config sed for latest
—
Oliver Smith /
detail
- ttcn3-sgsn: Update config to test RIM over GTPCv1
—
Pau Espin Pedrol /
detail
- ttcn3-stp-test: Add mp_stp_has_asp_quirk:=false for latest
—
laforge /
detail
- osmo-gsm-tester: Update srsLTE references to srsRAN
—
Pau Espin Pedrol /
detail
- jenkins-common.sh: support 2021q1 feed
—
Oliver Smith /
detail
- centos8-build: use nightly URL to invalidate cache
—
Oliver Smith /
detail
- centos8: don't download .repo file
—
Oliver Smith /
detail
- make: add OSMOCOM_REPO_PATH
—
Oliver Smith /
detail
- make: add OSMOCOM_REPO_TESTSUITE_MIRROR
—
Oliver Smith /
detail
- centos8-obs-latest: use OSMOCOM_REPO_VERSION
—
Oliver Smith /
detail
- osmo-*-latest: use OSMOCOM_REPO_VERSION
—
Oliver Smith /
detail
- arm-none-eabi-gcc-4.8.2: install missing packages
—
Vadim Yanitskiy /
detail
- make: add UID as --build-arg
—
Oliver Smith /
detail
- debian10-obs-submit: new container
—
Oliver Smith /
detail
- osmo-mgw: Use DSCP value in valid range (<= 63)
—
laforge /
detail
- remove deprecated 'logging level all everything' from configs
—
laforge /
detail
- Add osmo-pcap-master
—
laforge /
detail
- Add osmo-pcap-latest
—
laforge /
detail
- Add ttcn3-pcap-client-test
—
laforge /
detail
- ttcn3-pcu-sns: add vty parameter to allow ttcn3 to connect
—
daniel /
detail
- osmo-gsm-tester: open5gs deps only for x86_64
—
Oliver Smith /
detail
- gbproxy: Switch to IP-SNS on the BSS side
—
laforge /
detail
- ogt: Add support to build open5gs
—
Pau Espin Pedrol /
detail
- gbproxy: Add mp_gbproxy_ip to check BVC FSM state
—
laforge /
detail
- docker_images_require: list installed Osmocom pkgs
—
laforge /
detail
- Check in GCC 4.8.2 based cross compiler for ARM EABI target
—
laforge /
detail
- Add ttcn3-ns-test-sns container
—
laforge /
detail
- Add ttcn3-ns-test-fr container
—
laforge /
detail
- add osmo-ns-master container with osmo-ns-dummy binary
—
laforge /
detail
- Add ttcn3-ns-test container
—
laforge /
detail
- ogt: Update base image to debian buster
—
Pau Espin Pedrol /
detail
- Add debian-buster-jenkins docker setup
—
laforge /
detail
- ttcn3-bts-test: use 'gsmtap-remote-host' parameter
—
Vadim Yanitskiy /
detail
- ttcn3-bts-test: use 'gsmtap-sapi enable-all' parameter
—
Vadim Yanitskiy /
detail
- ttcn3-bts-test: OML tests ivolve no GSMTAP Um logging
—
Vadim Yanitskiy /
detail
- fr: kill the frnet container before trying to 'rm' it
—
laforge /
detail
- ogt: Drop old arfcn leftovers from resources.conf
—
Pau Espin Pedrol /
detail
- ttcn3-docker-prepare.sh: fix handling of multiple PROJECTs
—
Vadim Yanitskiy /
detail
- ttcn3-fr-test: store execution logs for both containers
—
Vadim Yanitskiy /
detail
- ttcn3-fr-test: add missing TTCN3_PCAP_PATH for '-frnet' container
—
Vadim Yanitskiy /
detail
- ttcn3-sgsn-test/osmo-sgsn.cfg: drop deperecated log categories
—
Vadim Yanitskiy /
detail
- debian-stretch-build: add missing respawn.sh
—
laforge /
detail
- ttcn3-pcu: Disable sending all DATA.ind on pcu -latest
—
Pau Espin Pedrol /
detail
- make/Makefile: use git to get the project's root directory
—
Vadim Yanitskiy /
detail
- Make respawn.sh a common part of *-build/-obs images
—
Vadim Yanitskiy /
detail
- Share a single instance of Release.key between all images
—
Vadim Yanitskiy /
detail
- debian-stretch-build-dist: use -obs-latest
—
Oliver Smith /
detail
- osmo-msc-latest: centos8: add libdbi-dbd-sqlite
—
Oliver Smith /
detail
- */osmo-bsc.cfg: remove obsolete no-op parameters
—
Vadim Yanitskiy /
detail
- */osmo-bts.cfg: remove obsolete 'uplink-power-target'
—
Vadim Yanitskiy /
detail
- fix ttcn3-bsc-test under CentOS: install missing osmo-bts-omldummy
—
Vadim Yanitskiy /
detail
- debian-stretch-jenkins: install osmo-trx depends
—
Oliver Smith /
detail
- osmo-remsim-master/Dockerfile: add missing libcsv-devel dependency
—
Vadim Yanitskiy /
detail
- Revert "ttcn3-pcu: Disable sending all DATA.ind on pcu -latest"
—
Pau Espin Pedrol /
detail
- ttcn3-pcu: Disable sending all DATA.ind on pcu -latest
—
Pau Espin Pedrol /
detail
- debian-stretch-obs-latest: new container
—
Oliver Smith /
detail
- osmo-*-latest: support centos8
—
Oliver Smith /
detail
- osmo-*-master: move common code to *-build
—
Oliver Smith /
detail
- osmo-ggsn-latest: add more kernel build depends
—
Oliver Smith /
detail
- osmo-msc-latest: implicit libdbd-sqlite3 install
—
Oliver Smith /
detail
- Add osmo-gbproxy-latest container
—
laforge /
detail
- add osmo-smlc-latest container
—
laforge /
detail
- kernel-test: verify REMOTE_NAME and URL
—
Oliver Smith /
detail
- README.md: describe OSMO_*_BRANCH
—
Oliver Smith /
detail
- ttcn3-cbc-test: fix copy+paste error regarding osmo-stp.cfg
—
laforge /
detail
- kernel-test: don't try to use KVM if not available
—
Oliver Smith /
detail
- Get rid of uneeded param StatsD_Checker.mp_enable_stats
—
Pau Espin Pedrol /
detail
- ttcn3-bsc: Get rid of uneeded param BSC_Tests.mp_media_mgw_offer_ipv6
—
Pau Espin Pedrol /
detail
- bts-test: Drop uneeded module param RSL_Emulation.mp_rslem_patch_ipa_cid
—
Pau Espin Pedrol /
detail
- ttcn3-hlr: Drop uneeded module param HLR_Tests.mp_hlr_supports_dgsm
—
Pau Espin Pedrol /
detail
- ttcn3-msc: Drop uneeded module params
—
Pau Espin Pedrol /
detail
- ttcn3-sip: Drop uneeded module param MNCC_Emulation.mp_mncc_version
—
Pau Espin Pedrol /
detail
- jenkins-common.sh: add common clean up trap
—
Oliver Smith /
detail
- */jenkins.sh: set -e after setting clean up trap
—
Oliver Smith /
detail
- jenkins-common: put fix_perms() in clean_up_common
—
Oliver Smith /
detail
- osmo-ggsn-master: add configure --enable-gtp-linux
—
Oliver Smith /
detail
- ttcn3-ggsn-test: add kernel test
—
Oliver Smith /
detail
- Remove test backward compatibility with older osmo-* versions
—
Pau Espin Pedrol /
detail
- add osmo-cbc-latest container
—
laforge /
detail
- cbc: Add osmo-cbc-master container
—
laforge /
detail
- cbc: New ttcn3-cbc-test container
—
laforge /
detail
- gbproxy: update sns configuration to use ip-sns-bind
—
lynxis /
detail
- ttcn3-gbproxy-test: remove broken merge logs cmd
—
laforge /
detail
- gerrit: update to 3.2.7 for security reasons
—
laforge /
detail
- Revert "RFC: allow to set configuration and/or specific testcases"
—
Oliver Smith /
detail
- ttcn3: use REGISTRY arg with debian-stretch-titan
—
Oliver Smith /
detail
- ttcn3: remove /root/projects/git symlink
—
Oliver Smith /
detail
- ttcn3: move initial clone to debian-stretch-titan
—
Oliver Smith /
detail
- debian-stretch-titan: update deps on change
—
Oliver Smith /
detail
- ttcn3: move prepare code to shared script
—
Oliver Smith /
detail
- debian-stretch-titan: prepare: run 'make deps'
—
Oliver Smith /
detail
- debian-stretch-titan: prepare: start/stop links
—
Oliver Smith /
detail
- ttcn3: move shared run code to script
—
Oliver Smith /
detail
- ttcn3-{fr,gbproxy}-test: use ttcn3-docker-run too
—
Oliver Smith /
detail
- osmo-sip-master: Don't install packages not required
—
laforge /
detail
- redmine: Make changeset keywords work with OS# annotation
—
laforge /
detail
- gbproxy: Fix ip-sns VTY config
—
dwillmann /
detail
- Add osmo-gbproxy-* container for osmo-gbproxy
—
dwillmann /
detail
- ttcn3-fr-tests: Configure MTU to 1700
—
laforge /
detail
- ttcn3-fr-tests: Disable junit-xml generation for FRNET_Tests
—
laforge /
detail
- New ttcn3-fr-test container
—
laforge /
detail
- osmo-pcu-master/Dockerfile: add missing libosmoctrl dependency
—
Vadim Yanitskiy /
detail
- ttcn3-pcu: Update configs to support NACC tests
—
Pau Espin Pedrol /
detail
- sgsn: change configuration to the new NS2
—
lynxis /
detail
- ttcn3-gbproxy-test: s/sgsn/gbproxy/
—
laforge /
detail
- debian-repo-install-test: remove Release.key
—
Oliver Smith /
detail
- rename {debian => debian9}-repo-install-test
—
Oliver Smith /
detail
- debian10-repo-install-test: new container
—
Oliver Smith /
detail
- ttcn3-pcu-test-sns: Fix syntax errors in config file of previous commit
—
laforge /
detail
- ttcn3-pcu-test-sns: fix DTE 'Encoding an unbound integer value'
—
Vadim Yanitskiy /
detail
- osmo-gbproxy: fix configuration
—
laforge /
detail
- gbproxy,pcu,sgsn: Update config files
—
laforge /
detail
- gbproxy: Use separate NS-VC for data + signaling
—
laforge /
detail
- ttcn3-pcu-test/sns: add configuration for 2nd and 3rd nsvc
—
lynxis /
detail
- gbproxy: Update configs for SGSN poool with 2 SGSN, NRI, ...
—
laforge /
detail
- fpga-build: add osmo-ci
—
Oliver Smith /
detail
- debian-stretch-jenkins,fpga-build: add gsm-manuals
—
Oliver Smith /
detail
- Cosmetic: debian-stretch-jenkins, osmo-gsm-tester: fix indent
—
Oliver Smith /
detail
- fpga-build: don't write path to /etc/environment
—
Oliver Smith /
detail
- ttcn3-gbproxy-test-fr: fix SNS ip address
—
lynxis /
detail
- make osmo-gbproxy.cfg in ttcn3-gbproxy and ttcn3-gbproxy-fr to look
—
lynxis /
detail
- debian-stretch-jenkins, osmo-gsm-tester: add osmo-ci
—
laforge /
detail
- gbproxy-fr: Enable IP-SNS towards SGSN
—
lynxis /
detail
- gbproxy: Enable IP-SNS towards SGSN
—
dwillmann /
detail
- ttcn3-gbproxy-test: Fix pcap capture with dumpcap
—
dwillmann /
detail
- ttcn3-gbproxy-test: Fix osmo-gbproxy config
—
dwillmann /
detail
- osmo-gbproxy: Change config file to comply with change in upstream
—
laforge /
detail
- Introduce osmo-ran docker image set up
—
laforge /
detail
- fpga-build: install missing toosls required for 'publish' and manuals
—
laforge /
detail
- fpga-build: Make sure PATH is also set for non-root users
—
laforge /
detail
- fpga-build: Add packages required for rendering manuals
—
laforge /
detail
- fpga-build: Create 'build' user like in 'debian-stretch-jenkins'
—
laforge /
detail
- ttcn3-bts-test: fix: sleep 1 second before respawning the IUT
—
Vadim Yanitskiy /
detail
- migrate from CentOS_8_Stream to CentOS_8
—
laforge /
detail
- centos8-build: Make 'make' work again
—
laforge /
detail
- fpga-build: Make riscv + fpga toolchain version configurable
—
laforge /
detail
- gbproxy-test-fr: Avoid dumpcap failing to write to /data
—
laforge /
detail
- debian-stretch-titan: Add wireshark-common for dumpcap
—
laforge /
detail
- ttcn3-gbproxy-test: Use dumpcap instead of tcpdump
—
laforge /
detail
- ttcn3-gbproxy-test-fr: depend also on osmo-sgsn-master
—
laforge /
detail
- debian-stretch-titan: use dpkg to install libfftranscode
—
daniel /
detail
- ttcn3-gbproxy-test-fr: Fix hdlcnet device names
—
laforge /
detail
- centos8-build: Use arg OSMOCOM_REPO_MIRROR
—
laforge /
detail
- centos8-repo-install-test: Upstream requires 'powertools' not
—
laforge /
detail
- gbproxy-test-fr: Fix syntax error in config file
—
laforge /
detail
- centos8-build: Upstream requires 'powertools' not 'PowerTools'
—
laforge /
detail
- gbproxy: Enable test of load-sharing when running over FR
—
laforge /
detail
- gbproxy: update ttcn3 configuration to reflect osmo-gbproxy.cfg
—
laforge /
detail
- Rename centos-repo-install-test/Dockerfile to centos8
—
Pau Espin Pedrol /
detail
- ttcn3-gbproxy-test-fr: Catch up with config changes
—
dwillmann /
detail
- common: Introduce OSMOCOM_REPO_MIRROR param
—
Pau Espin Pedrol /
detail
- common: Automatize UPSTREAM_DISTRO name based on image name
—
laforge /
detail
- osmo-gbproxy-master (derived from osmo-sgsn-master)
—
laforge /
detail
- Add ttcn3-gbproxy-test-fr for FR related testing
—
laforge /
detail
- debian-stretch-titan: use libfftranscode 0.3 (latest version)
—
laforge /
detail
- debian-stretch-titan: Use correct architecture of libfftranscode
—
laforge /
detail
- NS_Configuration: Adjust config regarding support for NS-VCG
—
laforge /
detail
- ogt: Install dependency python3-watchdog
—
Pau Espin Pedrol /
detail
- introduce 'REGISTRY' argument to all Dockerfiles
—
laforge /
detail
- osmo-mgw-master: Add missing libosmo-abis dependency on CentOS
—
laforge /
detail
- ogt: Create grbroker target directory
—
Pau Espin Pedrol /
detail
- ttcn3-bts: Enable gsmtap sapi for tch in osmo-bts.cfg
—
laforge /
detail
- fix ttcn3-smlc-test/Dockerfile
—
Neels Hofmeyr /
detail
- gbproxy: Fix docker config for SGSN NS port
—
laforge /
detail
- osmo-gsm-tester: Install gnuradio dependency
—
Pau Espin Pedrol /
detail
- bsc: add missing 'smlc / enable' for LCS tests
—
Neels Hofmeyr /
detail
- osmo-*-master: Invalidate docker cache when CentOS repo changes
—
laforge /
detail
- osmo-sgsn-*: Expose ports for gbproxy as well
—
dwillmann /
detail
- Add GBProxy_Test
—
dwillmann /
detail
- osmo-pcu-test: Only handle SNS where we test IP-SNS
—
dwillmann /
detail
- bsc: enable LCS tests for normal bsc master tests
—
Neels Hofmeyr /
detail
- add osmo-smlc-master
—
Neels Hofmeyr /
detail
- add ttcn3-smlc-test
—
Neels Hofmeyr /
detail
- bsc: enable Lb routing between BSC <-> virtual SMLC
—
Neels Hofmeyr /
detail
- bsc: add mp_enable_lcs_tests := false
—
Neels Hofmeyr /
detail
- ttcn3-pcu-test: fix latest: tolerate CellId IE in BVC-RESET for BVCO=0
—
Vadim Yanitskiy /
detail
- ogt: Update installed patchelf to required version 0.11
—
Pau Espin Pedrol /
detail
- gerrit: upgrade to 3.2.3
—
laforge /
detail
- gerrit: upgrade to 2.16.22
—
laforge /
detail
- cgit: osmo-commit-filter.py: migrate from deprecated cgi.escape to
—
laforge /
detail
- cgit: Don't depend on unmaintained upstream; work directly with debian
—
laforge /
detail
- cgit: Increase fastcgi timeout from default 60s to 120s
—
laforge /
detail
- BSC_Tests: disable IPV6 parameter mp_media_mgw_offer_ipv6 for latest
—
pmaier@sysmocom.de /
detail
- PCU+SGSN: Adjust to new "provider" structure of NSConfiguration
—
laforge /
detail
- ttcn3-pcu-test: Change config to support statsd
—
dwillmann /
detail
- ttcn3-pcu-test-sns: use PCUIFv9 for 'latest' images
—
Vadim Yanitskiy /
detail
- ttcn3-{pcu,bts}-test: use PCUIFv9 for 'latest' images
—
Vadim Yanitskiy /
detail
- PCU+SGSN tests: Set address_family field of NSConfiguration
—
laforge /
detail
- ttcn3-bsc: Set new BSC_Tests_CBSP module parameters
—
laforge /
detail
- ttcn3-sip: Update default mp_mncc_version
—
Pau Espin Pedrol /
detail
- ttcn3-msc: Force MNCCv6 on ttcn3-msc-test-latest
—
Pau Espin Pedrol /
detail
- ttcn3-msc: Update module params against new osmo-ttcn3-hacks.git
—
laforge /
detail
- New fpga-build image for building iCE40 gateware + RISC-V firmware
—
laforge /
detail
- ttcn3-bts-test/fh: do not configure CBCH slots statically
—
Vadim Yanitskiy /
detail
- ttcn3-mgw: Update module param addresses naming to support ipv6
—
Pau Espin Pedrol /
detail
- ttcn3-bsc-sccplite: Bind osmo-bsc SS7 instance to container's local
—
Pau Espin Pedrol /
detail
- ttcn3-msc: Enable osmo-msc SS7 multi-homing and IPv6 features in tests
—
laforge /
detail
- ttcn3-sgsn: Enable osmo-sgsn SS7 multi-homing and IPv6 features in tests
—
laforge /
detail
- ttcn3-bsc: Enable osmo-bsc SS7 multi-homing and IPv6 features in tests
—
laforge /
detail
- bsc CBSP: apply new cbc config
—
Neels Hofmeyr /
detail
- jenkins-common.sh: Add function to print docker network related
—
Pau Espin Pedrol /
detail
- ttcn3-stp: Configure M3UA setup to use IPv6 together with IPv4
—
laforge /
detail
- ttcn3-mgw-test: Removing the e1 config options on latest
—
dwillmann /
detail
- msc: Disable expecting CommonID when testing 'latest'
—
laforge /
detail
- osmo-mgw.cfg: fix config file + add E1 trunk
—
pmaier@sysmocom.de /
detail
- debian-stretch-jenkins: install osmo-python-tests for python2
—
lynxis /
detail
- ttcn3-ggsn-test: Add static IPv6 addresses to containers
—
laforge /
detail
- ttcn3-ggsn-test: Use IPv6 address of the tester as "DNS1"
—
laforge /
detail
- migrate ttcn3-msc-test from 172.18.1.0/24 to 172.18.20.0/24
—
laforge /
detail
- Update bsc tester config to enable stats testing
—
dwillmann /
detail
- ttcn3-bts-test/jenkins.sh: do not create unused directory
—
laforge /
detail
- ttcn3-bts-test/jenkins.sh: use bts-tester-{generic,oml,virtphy,hopping}
—
laforge /
detail
- ttcn3-bts-test/fh: fix: properly include BTS_Tests.cfg
—
laforge /
detail
- ttcn3-bts-test/fh: fix: do not run BTS_Tests.control twice
—
laforge /
detail
- ttcn3-bts-test/fh: fix: properly rename classnames
—
laforge /
detail
- Enable IPv6 in docker networking
—
laforge /
detail
- bsc-sccplite CBSP: fix osmo-bsc.cfg to contain 3 BTS with a CBCH
—
Neels Hofmeyr /
detail
- bsc CBSP: fix osmo-bsc.cfg to contain 3 BTS with a CBCH
—
Neels Hofmeyr /
detail
- jenkins-common.sh: exit early on full disk
—
laforge /
detail
- ttcn3-bts-test/jenkins.sh: enable frequency hopping test cases
—
Vadim Yanitskiy /
detail
- ttcn3-bts-test/osmo-bsc.cfg: do not enable CBCH slots by default
—
Vadim Yanitskiy /
detail
- ttcn3-bts-test/osmo-bsc.cfg: change pchan config for TRX#1..3
—
Vadim Yanitskiy /
detail
- ttcn3-bts-test: add configuration with frequency hopping parameters
—
Vadim Yanitskiy /
detail
- make: use $(nproc) instead of hard-coded number of cores
—
Vadim Yanitskiy /
detail
- ttcn3-bts: Fix most OML test failing after osmo-bts shutdown
—
Pau Espin Pedrol /
detail
- ttcn3-msc-test latest: do not require VLR cell id match in latest build
—
Neels Hofmeyr /
detail
- ttcn3-bts-test/osmo-bts.cfg: use logging level 'notice' by default
—
Vadim Yanitskiy /
detail
- ttcn3-bts-test/osmo-bsc.cfg: use logging level 'notice' by default
—
Vadim Yanitskiy /
detail
- Makefile: Support overriding LIBOSMOCORE_BRANCH
—
Pau Espin Pedrol /
detail
- bsc: Store osmo-bts-omldummy logs out of docker container
—
Pau Espin Pedrol /
detail
- ttcn3-bsc-test latest: remove MSC pooling specific bits in latest build
—
Neels Hofmeyr /
detail
- MSC_Tests.cfg: tweak comments
—
Neels Hofmeyr /
detail
- ttcn3-bts-test/BTS_Tests.cfg: configure number of transceivers
—
Vadim Yanitskiy /
detail
- collect core dumps: '--ulimit core=-1' and WORKDIR=/data everywhere
—
laforge /
detail
- bsc.cfg: SCCPlite = AoIP: adjust logging config
—
Neels Hofmeyr /
detail
- attempt to capture core dump from osmo-stp during ttcn3-bsc-test run
—
Neels Hofmeyr /
detail
- bsc: adjust osmo-bsc.cfg for MSC pooling tests
—
Neels Hofmeyr /
detail
- bsc.cfg: SCCPlite = AoIP: adjust handover config
—
Neels Hofmeyr /
detail
- bsc.cfg: SCCPlite = AoIP: adjust si2quater config
—
Neels Hofmeyr /
detail
- BSC_Tests.cfg for SCCPlite: adjust cfg for multiple MSCs
—
Neels Hofmeyr /
detail
- BSC_Tests.cfg: adjust cfg for multiple MSCs
—
Neels Hofmeyr /
detail
- debian-stretch-jenkins/Dockerfile: Install source-highlight
—
laforge /
detail
- osmo-gsm-tester: Update resources.conf syntax changes
—
Pau Espin Pedrol /
detail
- ttcn3-bts-test/jenkins.sh: fix latest: enable IPA stream ID patching
—
Vadim Yanitskiy /
detail
- ttcn3-bts: Update cfg for test TC_tx_power_start_ramp_up_bcch
—
Pau Espin Pedrol /
detail
- ttcn3-bts-test/jenkins.sh: fix: properly start virtphy
—
Vadim Yanitskiy /
detail
- ttcn3-bts: jenkins.sh: Log fake_trx stdout to file
—
laforge /
detail
- debian-stretch-titan: do not install unneeded dependencies
—
Vadim Yanitskiy /
detail
- ttcn3-msc-test: fix osmo-msc.cfg: make it work with latest
—
Vadim Yanitskiy /
detail
- osmo-{bsc,msc}.cfg: eliminate 'periodic location update 30'
—
Vadim Yanitskiy /
detail
- centos8-build: new image
—
Oliver Smith /
detail
- docker_images_require: scope of i: local
—
Oliver Smith /
detail
- docker_images_require: build depends too
—
Oliver Smith /
detail
- ttcn3-*-test: remove implicit dependencies
—
Oliver Smith /
detail
- make/Makefile: add DISTRO argument
—
Oliver Smith /
detail
- jenkins-common.sh: support osmo-*-centos8 images
—
Oliver Smith /
detail
- osmo-*-master: support centos8
—
Oliver Smith /
detail
- osmo-bsc.cfg: drop deprecated '11bit_rach_support_for_egprs'
—
Vadim Yanitskiy /
detail
- osmo-bsc.cfg: drop non-existing 'access-list-name bsc-list'
—
Vadim Yanitskiy /
detail
- osmo-bsc.cfg: drop deprecated 'ip.access rtp-base' parameter
—
Vadim Yanitskiy /
detail
- ttcn3-bts-test: enable 3 additional transceivers for BTS#0
—
Vadim Yanitskiy /
detail
- debian-repo-install-test: move scripts to osmo-ci
—
Oliver Smith /
detail
- centos-repo-install-test: new image
—
Oliver Smith /
detail
- bsc: drop access-list-name from osmo-bsc.cfg
—
Neels Hofmeyr /
detail
- ttcn3-hlr-tests: enable DGSM tests
—
Oliver Smith /
detail
- bsc/osmo-bsc.cfg: remove legacy 'rtp-base' config
—
Neels Hofmeyr /
detail
- osmo-gsm-tester: Fix typo in path in jenkins.sh
—
Pau Espin Pedrol /
detail
- osmo-gsm-tester: Point config parameter to file instead of its dirname
—
Pau Espin Pedrol /
detail
- cgit: change URL for gerrit change-ids
—
laforge /
detail
- osmo-gsm-tester: Pass conf dir through -c cmd line arg instead of env
—
Pau Espin Pedrol /
detail
- ttcn3-*-test/jenkins*.sh: add $DOCKER_ARGS
—
Oliver Smith /
detail
- osmo-hlr-master: run ldconfig
—
Oliver Smith /
detail
- gerrit: Update to 2.16.18
—
laforge /
detail
- ttcn3-pcu: Fix cfgn content after ttcn3 module renaming
—
Pau Espin Pedrol /
detail
- open5gs: Add pgw.sh
—
laforge /
detail
- add osmo-uecups-master container
—
laforge /
detail
- add open5gs-master docker container
—
laforge /
detail
- debian-stretch-jenkins: Add osmo-uecups dependencies
—
laforge /
detail
- ttcn3-bts-test: enable time / date logging for fake_trx.py
—
Vadim Yanitskiy /
detail
- osmo-gsm-tester: Update path to sysmocom's specific setup
—
Pau Espin Pedrol /
detail
- ttcn3-bts-test/virtphy: remove deprecated 'ms-power-control dsp'
—
Vadim Yanitskiy /
detail
- osmo-bsc-{latest,master}/osmo-bsc.cfg: Remove 'nat' from logging
—
Vadim Yanitskiy /
detail
- ttcn3-bts-test/osmo-bsc.cfg: Remove 'nat' from logging
—
Vadim Yanitskiy /
detail
- ttcn3-bsc-test: Remove 'nat' from logging
—
laforge /
detail
- osmo-gsm-tester/resources.conf: Add 2g,4g modem features attr
—
Pau Espin Pedrol /
detail
- osmo-gsm-tester: Require debian-stretch-jenkins as Dockerfile suggests
—
Pau Espin Pedrol /
detail
- ttcn3-bsc-test: Enable CBSP tests
—
laforge /
detail
- update OBS Release.key; the old one expired today.
—
laforge /
detail
- osmo-gsm-tester: Use non 'inst' name as target install dir, and remove
—
Pau Espin Pedrol /
detail
- osmo-gsm-tester: Allow changing host's trial directory
—
Pau Espin Pedrol /
detail
- osmo-gsm-tester: Print colored run output succes/failure
—
Pau Espin Pedrol /
detail
- osmo-gsm-tester: Build srsLTE inside the docker instance if inst not
—
Pau Espin Pedrol /
detail
- osmo-gsm-tester: Base docker image on debian-stretch-jenkins
—
Pau Espin Pedrol /
detail
- osmo-gsm-tester: Allow setting rtprio inside the container
—
Pau Espin Pedrol /
detail
- osmo-gsm-tester: Allow passing osmo-gsm-tester params from jenkins.sh
—
Pau Espin Pedrol /
detail
- remsim: Enable "classic" client tests (client in separate container)
—
laforge /
detail
- osmo-remism-latest: Actually use 'latest', not 'nightly' feed
—
laforge /
detail
- debian-stretch-jenkins: Install libulfius from osmocom OBS repos
—
Pau Espin Pedrol /
detail
- osmo-gsm-tester: new versions require python3-numpy
—
Pau Espin Pedrol /
detail
- osmo-gsm-tester: Add missing srsLTE dependencies (soapy)
—
Pau Espin Pedrol /
detail
- osmo-gsm-tester: Improvements anv fixes to run 4G network with latest
—
Pau Espin Pedrol /
detail
- osmo-gsm-tester: Copy limits.d files to docker image
—
Pau Espin Pedrol /
detail
- Introduce osmo-gsm-tester docker setup
—
laforge /
detail
- osmo-remsim-master: Add vpcd + pcscd to Docker image
—
laforge /
detail
- remsim: Integrate pcscd+ifd-vpcd for bankd tests
—
laforge /
detail
- update gerrit to 2.16.16
—
laforge /
detail
- redmine: We no longer need the hmac diff
—
laforge /
detail
- ttcn3-hlr-test: mp_hlr_supports_dgsm := false
—
Oliver Smith /
detail
- ttcn3-hlr-test: set mp_hlr_supports_dgsm
—
Oliver Smith /
detail
- sccp: Enable gsmtap log target and configure stderr logging
—
Pau Espin Pedrol /
detail
- stp-master/Dockerfile: Install sccp_devmo_user bin instead of libtool
—
Pau Espin Pedrol /
detail
- ttcn3-pcu: Bind VTY to assigned IP addr
—
Pau Espin Pedrol /
detail
- Introduce ttcn-sccp dockerized setup
—
Pau Espin Pedrol /
detail
- ttcn3-stp: Set default OSMO_TTCN3_BRANCH to master
—
Pau Espin Pedrol /
detail
- README.md: Document how to get gdb backtrace from process crash
—
Pau Espin Pedrol /
detail
- debian-stretch-jenkins: move from osmo-ci.git
—
Oliver Smith /
detail
- debian-buster-erlang: rename user to "build"
—
Oliver Smith /
detail
- Add debian-buster-simtrace2 Dockerfile
—
laforge /
detail
- start debian-buster-build as copy of debian-jessie-build
—
laforge /
detail
- debian-buster-build: actually switch to buster
—
laforge /
detail
- debian-*-build: Add {gcc,newlib}-arm-none-eabi for simtrace2 firmware
—
laforge /
detail
- docker-*-build: Add missign dependency to stow
—
laforge /
detail
![[Jenkins]](/jenkins/static/166fa6d8/images/svgs/logo.svg){kind=logo}
