Skip to content

Failed

gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend.iperf3.py (from gprs_trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend)

Failing for the past 232 builds (Since #2139 )
Took 8 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=585): Process ended prematurely: osmo-stp_10.42.42.5(pid=585) [trial-2370↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=585)]

Standard Output

----------------------------------------------
trial-2370 gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend iperf3.py
----------------------------------------------
05:54:20.159140 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
05:54:20.171247 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1)
05:54:20.314614 tst                        iperf3.py: using LAC 26303
05:54:20.440488 tst                        iperf3.py: using RAC 38
05:54:20.567530 tst                        iperf3.py: using CellId 26303
05:54:20.693447 tst                        iperf3.py: using BVCI 26304
05:54:20.718440 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
05:54:20.730236 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
05:54:20.741896 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
05:54:20.753491 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
05:54:20.764828 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
05:54:20.776196 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
05:54:20.787806 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
05:54:20.799246 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
05:54:20.810883 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4)
05:54:21.085515 tst                      iperf3.py:8: start iperfv3 server 10.42.42.10:5003...
05:54:21.210655 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
05:54:21.523264 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=577): Launched
05:54:21.783760 run  iperf3-srv_10.42.42.10(pid=578): Launched
05:54:21.967317 tst                      iperf3.py:8: start network...
05:54:22.092618 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
05:54:22.568276 run           create_hlr_db(pid=579): Launched
05:54:22.741261 bus                          /gobi_6: Setting Powered False
05:54:23.762629 run           create_hlr_db(pid=579): Terminated: ok {rc=0}
05:54:24.191971 run pcap-recorder_any(filters='host 10.42.42.2')(pid=581): Launched
05:54:24.515046 run     osmo-hlr_10.42.42.2(pid=582): Launched
05:54:24.632873 run              osmo-stp_10.42.42.5: Starting osmo-stp
05:54:25.195382 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=584): Launched
05:54:25.518890 run     osmo-stp_10.42.42.5(pid=585): Launched
05:54:25.637030 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
05:54:26.200821 run pcap-recorder_any(filters='host 10.42.42.6')(pid=587): Launched
05:54:26.315442 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
05:54:26.596397 run                patchelf(pid=588): Launched
05:54:26.785146 run     osmo-stp_10.42.42.5(pid=585): ERR: Terminated: ERROR {rc=1}  [trial-2370↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=585)]
05:54:26.922476 run     osmo-stp_10.42.42.5(pid=585): stdout: 
| (launched: 2022-12-10_05:54:25.359221)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
05:54:27.059830 run     osmo-stp_10.42.42.5(pid=585): stderr: 
| �[0;m�[38;5;43m20221210055425553 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221210055425553 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221210055425554 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221210055425554 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221210055425555 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221210055425555 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221210055425555 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
05:54:27.193496 run     osmo-stp_10.42.42.5(pid=585): stdout: 
| (launched: 2022-12-10_05:54:25.359221)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
05:54:27.325583 run     osmo-stp_10.42.42.5(pid=585): stderr: 
| �[0;m�[38;5;43m20221210055425553 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221210055425553 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221210055425554 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221210055425554 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221210055425555 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221210055425555 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221210055425555 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
05:54:27.479100 run                patchelf(pid=588): Terminating (SIGINT)
05:54:27.660114 run                patchelf(pid=588): Terminated: ok {rc=0}
05:54:27.693637 tst                      iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=585): Process ended prematurely: osmo-stp_10.42.42.5(pid=585) [trial-2370↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=585)]  [trial-2370↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8]
05:54:27.703837 tst                      iperf3.py:8: Test FAILED (7.6 sec)
05:54:27.766758 run     osmo-hlr_10.42.42.2(pid=582): ERR: Terminated: ERROR {rc=237}  [trial-2370↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=582)]
05:54:27.818274 run     osmo-hlr_10.42.42.2(pid=582): stdout: 
| (launched: 2022-12-10_05:54:24.356242) 
05:54:27.870517 run     osmo-hlr_10.42.42.2(pid=582): stderr: 
| �[0;m�[1;31m20221210055424556 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221210055424556 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221210055424556 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221210055424556 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221210055424556 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221210055424556 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221210055424568 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2370/run.2022-12-10_05-27-43/gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221210055424576 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221210055424576 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221210055424576 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
05:54:27.915000 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=577): Terminating (SIGTERM)
05:54:27.956931 run  iperf3-srv_10.42.42.10(pid=578): Terminating (SIGTERM)
05:54:27.999099 run pcap-recorder_any(filters='host 10.42.42.2')(pid=581): Terminating (SIGTERM)
05:54:28.041183 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=584): Terminating (SIGTERM)
05:54:28.083590 run pcap-recorder_any(filters='host 10.42.42.6')(pid=587): Terminating (SIGTERM)
05:54:28.093359 ---      ParallelTerminationStrategy: PID 577 died...
05:54:28.149699 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=577): Terminated: ok {rc=0}
05:54:28.159919 ---      ParallelTerminationStrategy: PID 578 died...
05:54:28.215691 run  iperf3-srv_10.42.42.10(pid=578): Terminated {rc=256}
05:54:28.225886 ---      ParallelTerminationStrategy: PID 581 died...
05:54:28.281791 run pcap-recorder_any(filters='host 10.42.42.2')(pid=581): Terminated: ok {rc=0}
05:54:28.291935 ---      ParallelTerminationStrategy: PID 584 died...
05:54:28.347823 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=584): Terminated: ok {rc=0}
05:54:28.358054 ---      ParallelTerminationStrategy: PID 587 died...
05:54:28.414102 run pcap-recorder_any(filters='host 10.42.42.6')(pid=587): Terminated: ok {rc=0}
05:54:28.501460 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module>
    setup_run_iperf3_test_parallel(1)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=585): Process ended prematurely: osmo-stp_10.42.42.5(pid=585) [trial-2370↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=585)]