Skip to content

Failed

gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend.iperf3.py (from gprs_trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend)

Failing for the past 233 builds (Since #2139 )
Took 8 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=10072): Process ended prematurely: osmo-stp_10.42.42.5(pid=10072) [trial-2371↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10072)]

Standard Output

----------------------------------------------
trial-2371 gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend iperf3.py
----------------------------------------------
07:20:44.652869 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
07:20:44.664855 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1)
07:20:44.806159 tst                        iperf3.py: using LAC 26764
07:20:44.922222 tst                        iperf3.py: using RAC 244
07:20:45.037322 tst                        iperf3.py: using CellId 26764
07:20:45.153363 tst                        iperf3.py: using BVCI 26765
07:20:45.175898 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
07:20:45.186986 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
07:20:45.198037 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
07:20:45.209263 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
07:20:45.220819 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
07:20:45.232152 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
07:20:45.243406 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
07:20:45.254584 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
07:20:45.266063 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4)
07:20:45.538451 tst                      iperf3.py:8: start iperfv3 server 10.42.42.10:5003...
07:20:45.661901 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
07:20:46.008309 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10064): Launched
07:20:46.322738 run iperf3-srv_10.42.42.10(pid=10065): Launched
07:20:46.524889 tst                      iperf3.py:8: start network...
07:20:46.662005 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
07:20:47.197620 run         create_hlr_db(pid=10066): Launched
07:20:47.381247 bus                          /gobi_6: Setting Powered False
07:20:48.402290 run         create_hlr_db(pid=10066): Terminated: ok {rc=0}
07:20:48.800023 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10068): Launched
07:20:49.095646 run   osmo-hlr_10.42.42.2(pid=10069): Launched
07:20:49.210258 run              osmo-stp_10.42.42.5: Starting osmo-stp
07:20:49.734289 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10071): Launched
07:20:50.029760 run   osmo-stp_10.42.42.5(pid=10072): Launched
07:20:50.137351 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
07:20:50.652382 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10074): Launched
07:20:50.758146 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
07:20:51.016457 run              patchelf(pid=10075): Launched
07:20:51.189809 run   osmo-stp_10.42.42.5(pid=10072): ERR: Terminated: ERROR {rc=1}  [trial-2371↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10072)]
07:20:51.316919 run   osmo-stp_10.42.42.5(pid=10072): stdout: 
| (launched: 2022-12-10_07:20:49.883983)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
07:20:51.444546 run   osmo-stp_10.42.42.5(pid=10072): stderr: 
| �[0;m�[38;5;43m20221210072050052 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221210072050052 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221210072050053 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221210072050053 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221210072050053 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221210072050054 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221210072050054 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
07:20:51.567085 run   osmo-stp_10.42.42.5(pid=10072): stdout: 
| (launched: 2022-12-10_07:20:49.883983)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
07:20:51.688371 run   osmo-stp_10.42.42.5(pid=10072): stderr: 
| �[0;m�[38;5;43m20221210072050052 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221210072050052 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221210072050053 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221210072050053 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221210072050053 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221210072050054 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221210072050054 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
07:20:51.830869 run              patchelf(pid=10075): Terminating (SIGINT)
07:20:51.998935 run              patchelf(pid=10075): Terminated: ok {rc=0}
07:20:52.029706 tst                      iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=10072): Process ended prematurely: osmo-stp_10.42.42.5(pid=10072) [trial-2371↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10072)]  [trial-2371↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8]
07:20:52.038662 tst                      iperf3.py:8: Test FAILED (7.4 sec)
07:20:52.098934 run   osmo-hlr_10.42.42.2(pid=10069): ERR: Terminated: ERROR {rc=237}  [trial-2371↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=10069)]
07:20:52.147646 run   osmo-hlr_10.42.42.2(pid=10069): stdout: 
| (launched: 2022-12-10_07:20:48.950210) 
07:20:52.196881 run   osmo-hlr_10.42.42.2(pid=10069): stderr: 
| �[0;m�[1;31m20221210072049124 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221210072049124 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221210072049124 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221210072049124 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221210072049124 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221210072049124 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221210072049136 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2371/run.2022-12-10_06-54-20/gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221210072049145 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221210072049146 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221210072049146 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
07:20:52.238901 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10064): Terminating (SIGTERM)
07:20:52.278979 run iperf3-srv_10.42.42.10(pid=10065): Terminating (SIGTERM)
07:20:52.318834 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10068): Terminating (SIGTERM)
07:20:52.358530 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10071): Terminating (SIGTERM)
07:20:52.398564 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10074): Terminating (SIGTERM)
07:20:52.407781 ---      ParallelTerminationStrategy: PID 10064 died...
07:20:52.460703 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10064): Terminated: ok {rc=0}
07:20:52.470721 ---      ParallelTerminationStrategy: PID 10065 died...
07:20:52.523328 run iperf3-srv_10.42.42.10(pid=10065): Terminated {rc=256}
07:20:52.533044 ---      ParallelTerminationStrategy: PID 10068 died...
07:20:52.585728 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10068): Terminated: ok {rc=0}
07:20:52.595421 ---      ParallelTerminationStrategy: PID 10071 died...
07:20:52.648807 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10071): Terminated: ok {rc=0}
07:20:52.658533 ---      ParallelTerminationStrategy: PID 10074 died...
07:20:52.711280 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10074): Terminated: ok {rc=0}
07:20:52.800440 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module>
    setup_run_iperf3_test_parallel(1)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=10072): Process ended prematurely: osmo-stp_10.42.42.5(pid=10072) [trial-2371↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10072)]