Skip to content
[Jenkins]Jenkins
log in | sign up

Failed

gprs:nanobts+band-1900+mod-bts0-dynts-ipa.iperf3.py (from gprs_nanobts+band-1900+mod-bts0-dynts-ipa)

Failing for the past 243 builds (Since #2139 )
Took 8 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=23170): Process ended prematurely: osmo-stp_10.42.42.5(pid=23170) [trial-2381↪gprs:nanobts+band-1900+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=23170)]

Standard Output

----------------------------------------------
trial-2381 gprs:nanobts+band-1900+mod-bts0-dynts-ipa iperf3.py
----------------------------------------------
20:14:47.725425 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
20:14:47.738000 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1)
20:14:47.897674 tst                        iperf3.py: using LAC 31235
20:14:48.025802 tst                        iperf3.py: using RAC 125
20:14:48.156544 tst                        iperf3.py: using CellId 31235
20:14:48.284625 tst                        iperf3.py: using BVCI 31236
20:14:48.309778 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
20:14:48.321467 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
20:14:48.332899 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
20:14:48.344756 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
20:14:48.356491 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
20:14:48.368121 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
20:14:48.379970 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
20:14:48.391514 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
20:14:48.403709 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4)
20:14:48.686482 tst                      iperf3.py:8: start iperfv3 server 10.42.42.10:5003...
20:14:48.814310 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
20:14:49.137477 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=23162): Launched
20:14:49.405898 run iperf3-srv_10.42.42.10(pid=23163): Launched
20:14:49.593068 tst                      iperf3.py:8: start network...
20:14:49.721406 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
20:14:50.216789 run         create_hlr_db(pid=23164): Launched
20:14:50.393096 bus                          /gobi_6: Setting Powered False
20:14:51.416130 run         create_hlr_db(pid=23164): Terminated: ok {rc=0}
20:14:51.829314 run pcap-recorder_any(filters='host 10.42.42.2')(pid=23166): Launched
20:14:52.140531 run   osmo-hlr_10.42.42.2(pid=23167): Launched
20:14:52.256844 run              osmo-stp_10.42.42.5: Starting osmo-stp
20:14:52.798651 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=23169): Launched
20:14:53.110335 run   osmo-stp_10.42.42.5(pid=23170): Launched
20:14:53.221853 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
20:14:53.760152 run pcap-recorder_any(filters='host 10.42.42.6')(pid=23172): Launched
20:14:53.869687 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
20:14:54.142010 run              patchelf(pid=23173): Launched
20:14:54.322752 run   osmo-stp_10.42.42.5(pid=23170): ERR: Terminated: ERROR {rc=1}  [trial-2381↪gprs:nanobts+band-1900+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=23170)]
20:14:54.454875 run   osmo-stp_10.42.42.5(pid=23170): stdout: 
| (launched: 2022-12-12_20:14:52.955188)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
20:14:54.587510 run   osmo-stp_10.42.42.5(pid=23170): stderr: 
| �[0;m�[38;5;43m20221212201453129 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221212201453130 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221212201453130 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221212201453130 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221212201453131 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221212201453131 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221212201453131 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
20:14:54.714738 run   osmo-stp_10.42.42.5(pid=23170): stdout: 
| (launched: 2022-12-12_20:14:52.955188)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
20:14:54.842005 run   osmo-stp_10.42.42.5(pid=23170): stderr: 
| �[0;m�[38;5;43m20221212201453129 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221212201453130 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221212201453130 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221212201453130 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221212201453131 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221212201453131 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221212201453131 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
20:14:54.989224 run              patchelf(pid=23173): Terminating (SIGINT)
20:14:55.162994 run              patchelf(pid=23173): Terminated: ok {rc=0}
20:14:55.194809 tst                      iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=23170): Process ended prematurely: osmo-stp_10.42.42.5(pid=23170) [trial-2381↪gprs:nanobts+band-1900+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=23170)]  [trial-2381↪gprs:nanobts+band-1900+mod-bts0-dynts-ipa↪iperf3.py:8]
20:14:55.204124 tst                      iperf3.py:8: Test FAILED (7.5 sec)
20:14:55.265489 run   osmo-hlr_10.42.42.2(pid=23167): ERR: Terminated: ERROR {rc=237}  [trial-2381↪gprs:nanobts+band-1900+mod-bts0-dynts-ipa↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=23167)]
20:14:55.315373 run   osmo-hlr_10.42.42.2(pid=23167): stdout: 
| (launched: 2022-12-12_20:14:51.985591) 
20:14:55.366294 run   osmo-hlr_10.42.42.2(pid=23167): stderr: 
| �[0;m�[1;31m20221212201452165 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221212201452165 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221212201452165 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221212201452165 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221212201452165 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221212201452165 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221212201452177 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2381/run.2022-12-12_19-09-05/gprs:nanobts+band-1900+mod-bts0-dynts-ipa/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221212201452186 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221212201452187 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221212201452187 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
20:14:55.409243 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=23162): Terminating (SIGTERM)
20:14:55.449577 run iperf3-srv_10.42.42.10(pid=23163): Terminating (SIGTERM)
20:14:55.489910 run pcap-recorder_any(filters='host 10.42.42.2')(pid=23166): Terminating (SIGTERM)
20:14:55.530239 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=23169): Terminating (SIGTERM)
20:14:55.570612 run pcap-recorder_any(filters='host 10.42.42.6')(pid=23172): Terminating (SIGTERM)
20:14:55.580004 ---      ParallelTerminationStrategy: PID 23162 died...
20:14:55.634602 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=23162): Terminated: ok {rc=0}
20:14:55.644409 ---      ParallelTerminationStrategy: PID 23163 died...
20:14:55.698649 run iperf3-srv_10.42.42.10(pid=23163): Terminated {rc=256}
20:14:55.708364 ---      ParallelTerminationStrategy: PID 23166 died...
20:14:55.762437 run pcap-recorder_any(filters='host 10.42.42.2')(pid=23166): Terminated: ok {rc=0}
20:14:55.772229 ---      ParallelTerminationStrategy: PID 23169 died...
20:14:55.826724 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=23169): Terminated: ok {rc=0}
20:14:55.836512 ---      ParallelTerminationStrategy: PID 23172 died...
20:14:55.890986 run pcap-recorder_any(filters='host 10.42.42.6')(pid=23172): Terminated: ok {rc=0}
20:14:55.981971 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module>
    setup_run_iperf3_test_parallel(1)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=23170): Process ended prematurely: osmo-stp_10.42.42.5(pid=23170) [trial-2381↪gprs:nanobts+band-1900+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=23170)]