Skip to content
[Jenkins]Jenkins
log in | sign up

Failed

gprs:nanobts+band-1900+mod-bts0-dynts-ipa.iperf3.py (from gprs_nanobts+band-1900+mod-bts0-dynts-ipa)

Failing for the past 244 builds (Since #2139 )
Took 8 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=31372): Process ended prematurely: osmo-stp_10.42.42.5(pid=31372) [trial-2382↪gprs:nanobts+band-1900+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=31372)]

Standard Output

----------------------------------------------
trial-2382 gprs:nanobts+band-1900+mod-bts0-dynts-ipa iperf3.py
----------------------------------------------
21:43:54.853049 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
21:43:54.865186 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1)
21:43:55.026664 tst                        iperf3.py: using LAC 31696
21:43:55.155443 tst                        iperf3.py: using RAC 76
21:43:55.286599 tst                        iperf3.py: using CellId 31696
21:43:55.410615 tst                        iperf3.py: using BVCI 31697
21:43:55.434572 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
21:43:55.445704 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
21:43:55.456375 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
21:43:55.467161 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
21:43:55.477979 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
21:43:55.488748 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
21:43:55.500647 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
21:43:55.511317 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
21:43:55.522810 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4)
21:43:55.821145 tst                      iperf3.py:8: start iperfv3 server 10.42.42.10:5003...
21:43:55.958967 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
21:43:56.298347 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31364): Launched
21:43:56.580482 run iperf3-srv_10.42.42.10(pid=31365): Launched
21:43:56.783277 tst                      iperf3.py:8: start network...
21:43:56.921755 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
21:43:57.439923 run         create_hlr_db(pid=31366): Launched
21:43:57.630822 bus                          /gobi_6: Setting Powered False
21:43:58.652748 run         create_hlr_db(pid=31366): Terminated: ok {rc=0}
21:43:59.088426 run pcap-recorder_any(filters='host 10.42.42.2')(pid=31368): Launched
21:43:59.418555 run   osmo-hlr_10.42.42.2(pid=31369): Launched
21:43:59.540624 run              osmo-stp_10.42.42.5: Starting osmo-stp
21:44:00.112091 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=31371): Launched
21:44:00.442581 run   osmo-stp_10.42.42.5(pid=31372): Launched
21:44:00.563466 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
21:44:01.169847 run pcap-recorder_any(filters='host 10.42.42.6')(pid=31374): Launched
21:44:01.290867 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
21:44:01.595200 run              patchelf(pid=31375): Launched
21:44:01.792277 run   osmo-stp_10.42.42.5(pid=31372): ERR: Terminated: ERROR {rc=1}  [trial-2382↪gprs:nanobts+band-1900+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=31372)]
21:44:01.937210 run   osmo-stp_10.42.42.5(pid=31372): stdout: 
| (launched: 2022-12-12_21:44:00.280275)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
21:44:02.082265 run   osmo-stp_10.42.42.5(pid=31372): stderr: 
| �[0;m�[38;5;43m20221212214400473 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221212214400473 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221212214400473 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221212214400474 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221212214400474 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221212214400474 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221212214400474 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
21:44:02.222712 run   osmo-stp_10.42.42.5(pid=31372): stdout: 
| (launched: 2022-12-12_21:44:00.280275)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
21:44:02.358488 run   osmo-stp_10.42.42.5(pid=31372): stderr: 
| �[0;m�[38;5;43m20221212214400473 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221212214400473 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221212214400473 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221212214400474 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221212214400474 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221212214400474 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221212214400474 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
21:44:02.516292 run              patchelf(pid=31375): Terminating (SIGINT)
21:44:02.703108 run              patchelf(pid=31375): Terminated: ok {rc=0}
21:44:02.737024 tst                      iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=31372): Process ended prematurely: osmo-stp_10.42.42.5(pid=31372) [trial-2382↪gprs:nanobts+band-1900+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=31372)]  [trial-2382↪gprs:nanobts+band-1900+mod-bts0-dynts-ipa↪iperf3.py:8]
21:44:02.747280 tst                      iperf3.py:8: Test FAILED (7.9 sec)
21:44:02.812651 run   osmo-hlr_10.42.42.2(pid=31369): ERR: Terminated: ERROR {rc=237}  [trial-2382↪gprs:nanobts+band-1900+mod-bts0-dynts-ipa↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=31369)]
21:44:02.865624 run   osmo-hlr_10.42.42.2(pid=31369): stdout: 
| (launched: 2022-12-12_21:43:59.256491) 
21:44:02.919268 run   osmo-hlr_10.42.42.2(pid=31369): stderr: 
| �[0;m�[1;31m20221212214359460 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221212214359460 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221212214359460 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221212214359460 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221212214359460 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221212214359460 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221212214359472 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2382/run.2022-12-12_20-36-34/gprs:nanobts+band-1900+mod-bts0-dynts-ipa/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221212214359480 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221212214359481 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221212214359481 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
21:44:02.964693 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31364): Terminating (SIGTERM)
21:44:03.008091 run iperf3-srv_10.42.42.10(pid=31365): Terminating (SIGTERM)
21:44:03.051190 run pcap-recorder_any(filters='host 10.42.42.2')(pid=31368): Terminating (SIGTERM)
21:44:03.094291 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=31371): Terminating (SIGTERM)
21:44:03.137307 run pcap-recorder_any(filters='host 10.42.42.6')(pid=31374): Terminating (SIGTERM)
21:44:03.147663 ---      ParallelTerminationStrategy: PID 31364 died...
21:44:03.205640 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31364): Terminated: ok {rc=0}
21:44:03.216380 ---      ParallelTerminationStrategy: PID 31365 died...
21:44:03.274009 run iperf3-srv_10.42.42.10(pid=31365): Terminated {rc=256}
21:44:03.284304 ---      ParallelTerminationStrategy: PID 31368 died...
21:44:03.341951 run pcap-recorder_any(filters='host 10.42.42.2')(pid=31368): Terminated: ok {rc=0}
21:44:03.352316 ---      ParallelTerminationStrategy: PID 31371 died...
21:44:03.409765 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=31371): Terminated: ok {rc=0}
21:44:03.420187 ---      ParallelTerminationStrategy: PID 31374 died...
21:44:03.477401 run pcap-recorder_any(filters='host 10.42.42.6')(pid=31374): Terminated: ok {rc=0}
21:44:03.567203 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module>
    setup_run_iperf3_test_parallel(1)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=31372): Process ended prematurely: osmo-stp_10.42.42.5(pid=31372) [trial-2382↪gprs:nanobts+band-1900+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=31372)]