Skip to content
[Jenkins]Jenkins
log in | sign up

Failed

gprs:trx-sysmocell5000+mod-bts0-dynts-osmo.iperf3.py (from gprs_trx-sysmocell5000+mod-bts0-dynts-osmo)

Failing for the past 243 builds (Since #2139 )
Took 8 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=20441): Process ended prematurely: osmo-stp_10.42.42.5(pid=20441) [trial-2381↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20441)]

Standard Output

----------------------------------------------
trial-2381 gprs:trx-sysmocell5000+mod-bts0-dynts-osmo iperf3.py
----------------------------------------------
19:43:36.587246 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
19:43:36.599080 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1)
19:43:36.760259 tst                        iperf3.py: using LAC 31069
19:43:36.881577 tst                        iperf3.py: using RAC 214
19:43:37.000189 tst                        iperf3.py: using CellId 31069
19:43:37.121186 tst                        iperf3.py: using BVCI 31070
19:43:37.144459 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
19:43:37.155532 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
19:43:37.166529 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
19:43:37.177521 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
19:43:37.188291 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
19:43:37.199086 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
19:43:37.210126 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
19:43:37.220852 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
19:43:37.231852 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4)
19:43:37.529361 tst                      iperf3.py:8: start iperfv3 server 10.42.42.10:5003...
19:43:37.666884 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
19:43:38.007788 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20433): Launched
19:43:38.292656 run iperf3-srv_10.42.42.10(pid=20434): Launched
19:43:38.494479 tst                      iperf3.py:8: start network...
19:43:38.632388 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
19:43:39.149637 run         create_hlr_db(pid=20435): Launched
19:43:39.340313 bus                          /gobi_6: Setting Powered False
19:43:40.362013 run         create_hlr_db(pid=20435): Terminated: ok {rc=0}
19:43:40.775643 run pcap-recorder_any(filters='host 10.42.42.2')(pid=20437): Launched
19:43:41.082829 run   osmo-hlr_10.42.42.2(pid=20438): Launched
19:43:41.195507 run              osmo-stp_10.42.42.5: Starting osmo-stp
19:43:41.727807 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=20440): Launched
19:43:42.036123 run   osmo-stp_10.42.42.5(pid=20441): Launched
19:43:42.147195 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
19:43:42.682372 run pcap-recorder_any(filters='host 10.42.42.6')(pid=20443): Launched
19:43:42.791025 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
19:43:43.059011 run              patchelf(pid=20444): Launched
19:43:43.238871 run   osmo-stp_10.42.42.5(pid=20441): ERR: Terminated: ERROR {rc=1}  [trial-2381↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20441)]
19:43:43.370815 run   osmo-stp_10.42.42.5(pid=20441): stdout: 
| (launched: 2022-12-12_19:43:41.884450)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
19:43:43.502840 run   osmo-stp_10.42.42.5(pid=20441): stderr: 
| �[0;m�[38;5;43m20221212194342055 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221212194342055 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221212194342055 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221212194342056 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221212194342056 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221212194342056 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221212194342056 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
19:43:43.629723 run   osmo-stp_10.42.42.5(pid=20441): stdout: 
| (launched: 2022-12-12_19:43:41.884450)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
19:43:43.755173 run   osmo-stp_10.42.42.5(pid=20441): stderr: 
| �[0;m�[38;5;43m20221212194342055 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221212194342055 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221212194342055 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221212194342056 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221212194342056 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221212194342056 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221212194342056 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
19:43:43.902348 run              patchelf(pid=20444): Terminating (SIGINT)
19:43:44.075424 run              patchelf(pid=20444): Terminated: ok {rc=0}
19:43:44.107148 tst                      iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=20441): Process ended prematurely: osmo-stp_10.42.42.5(pid=20441) [trial-2381↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20441)]  [trial-2381↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪iperf3.py:8]
19:43:44.116423 tst                      iperf3.py:8: Test FAILED (7.6 sec)
19:43:44.177033 run   osmo-hlr_10.42.42.2(pid=20438): ERR: Terminated: ERROR {rc=237}  [trial-2381↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=20438)]
19:43:44.226635 run   osmo-hlr_10.42.42.2(pid=20438): stdout: 
| (launched: 2022-12-12_19:43:40.931404) 
19:43:44.276978 run   osmo-hlr_10.42.42.2(pid=20438): stderr: 
| �[0;m�[1;31m20221212194341106 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221212194341106 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221212194341106 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221212194341106 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221212194341106 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221212194341106 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221212194341119 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2381/run.2022-12-12_19-09-05/gprs:trx-sysmocell5000+mod-bts0-dynts-osmo/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221212194341127 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221212194341127 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221212194341127 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
19:43:44.319832 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20433): Terminating (SIGTERM)
19:43:44.360014 run iperf3-srv_10.42.42.10(pid=20434): Terminating (SIGTERM)
19:43:44.400666 run pcap-recorder_any(filters='host 10.42.42.2')(pid=20437): Terminating (SIGTERM)
19:43:44.441335 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=20440): Terminating (SIGTERM)
19:43:44.481707 run pcap-recorder_any(filters='host 10.42.42.6')(pid=20443): Terminating (SIGTERM)
19:43:44.491048 ---      ParallelTerminationStrategy: PID 20433 died...
19:43:44.545023 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20433): Terminated: ok {rc=0}
19:43:44.554874 ---      ParallelTerminationStrategy: PID 20434 died...
19:43:44.608811 run iperf3-srv_10.42.42.10(pid=20434): Terminated {rc=256}
19:43:44.618404 ---      ParallelTerminationStrategy: PID 20437 died...
19:43:44.671911 run pcap-recorder_any(filters='host 10.42.42.2')(pid=20437): Terminated: ok {rc=0}
19:43:44.681804 ---      ParallelTerminationStrategy: PID 20440 died...
19:43:44.735456 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=20440): Terminated: ok {rc=0}
19:43:44.745108 ---      ParallelTerminationStrategy: PID 20443 died...
19:43:44.798522 run pcap-recorder_any(filters='host 10.42.42.6')(pid=20443): Terminated: ok {rc=0}
19:43:44.883277 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module>
    setup_run_iperf3_test_parallel(1)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=20441): Process ended prematurely: osmo-stp_10.42.42.5(pid=20441) [trial-2381↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20441)]