Skip to content
[Jenkins]Jenkins
log in | sign up

Failed

gprs:trx-sysmocell5000+mod-bts0-dynts-osmo.iperf3.py (from gprs_trx-sysmocell5000+mod-bts0-dynts-osmo)

Failing for the past 244 builds (Since #2139 )
Took 8 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=28537): Process ended prematurely: osmo-stp_10.42.42.5(pid=28537) [trial-2382↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28537)]

Standard Output

----------------------------------------------
trial-2382 gprs:trx-sysmocell5000+mod-bts0-dynts-osmo iperf3.py
----------------------------------------------
21:11:44.819158 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
21:11:44.831033 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1)
21:11:44.998946 tst                        iperf3.py: using LAC 31530
21:11:45.124130 tst                        iperf3.py: using RAC 165
21:11:45.249387 tst                        iperf3.py: using CellId 31530
21:11:45.375947 tst                        iperf3.py: using BVCI 31531
21:11:45.399926 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
21:11:45.411194 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
21:11:45.422189 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
21:11:45.433342 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
21:11:45.444435 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
21:11:45.455524 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
21:11:45.466793 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
21:11:45.477809 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
21:11:45.489043 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4)
21:11:45.775342 tst                      iperf3.py:8: start iperfv3 server 10.42.42.10:5003...
21:11:45.914902 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
21:11:46.287318 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28529): Launched
21:11:46.585200 run iperf3-srv_10.42.42.10(pid=28530): Launched
21:11:46.780644 tst                      iperf3.py:8: start network...
21:11:46.915041 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
21:11:47.422735 run         create_hlr_db(pid=28531): Launched
21:11:47.603170 bus                          /gobi_6: Setting Powered False
21:11:48.624801 run         create_hlr_db(pid=28531): Terminated: ok {rc=0}
21:11:49.071494 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28533): Launched
21:11:49.409817 run   osmo-hlr_10.42.42.2(pid=28534): Launched
21:11:49.534447 run              osmo-stp_10.42.42.5: Starting osmo-stp
21:11:50.122565 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28536): Launched
21:11:50.461291 run   osmo-stp_10.42.42.5(pid=28537): Launched
21:11:50.585361 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
21:11:51.173992 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28539): Launched
21:11:51.295446 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
21:11:51.590947 run              patchelf(pid=28540): Launched
21:11:51.787739 run   osmo-stp_10.42.42.5(pid=28537): ERR: Terminated: ERROR {rc=1}  [trial-2382↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28537)]
21:11:51.931752 run   osmo-stp_10.42.42.5(pid=28537): stdout: 
| (launched: 2022-12-12_21:11:50.294592)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
21:11:52.075396 run   osmo-stp_10.42.42.5(pid=28537): stderr: 
| �[0;m�[38;5;43m20221212211150487 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221212211150487 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221212211150487 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221212211150488 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221212211150488 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221212211150488 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221212211150488 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
21:11:52.214785 run   osmo-stp_10.42.42.5(pid=28537): stdout: 
| (launched: 2022-12-12_21:11:50.294592)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
21:11:52.353030 run   osmo-stp_10.42.42.5(pid=28537): stderr: 
| �[0;m�[38;5;43m20221212211150487 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221212211150487 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221212211150487 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221212211150488 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221212211150488 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221212211150488 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221212211150488 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
21:11:52.514185 run              patchelf(pid=28540): Terminating (SIGINT)
21:11:52.703452 run              patchelf(pid=28540): Terminated: ok {rc=0}
21:11:52.738394 tst                      iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=28537): Process ended prematurely: osmo-stp_10.42.42.5(pid=28537) [trial-2382↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28537)]  [trial-2382↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪iperf3.py:8]
21:11:52.748533 tst                      iperf3.py:8: Test FAILED (8.0 sec)
21:11:52.814290 run   osmo-hlr_10.42.42.2(pid=28534): ERR: Terminated: ERROR {rc=237}  [trial-2382↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=28534)]
21:11:52.867687 run   osmo-hlr_10.42.42.2(pid=28534): stdout: 
| (launched: 2022-12-12_21:11:49.243866) 
21:11:52.921866 run   osmo-hlr_10.42.42.2(pid=28534): stderr: 
| �[0;m�[1;31m20221212211149446 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221212211149446 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221212211149446 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221212211149446 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221212211149446 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221212211149446 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221212211149460 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2382/run.2022-12-12_20-36-34/gprs:trx-sysmocell5000+mod-bts0-dynts-osmo/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221212211149470 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221212211149470 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221212211149470 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
21:11:52.967519 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28529): Terminating (SIGTERM)
21:11:53.010752 run iperf3-srv_10.42.42.10(pid=28530): Terminating (SIGTERM)
21:11:53.054263 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28533): Terminating (SIGTERM)
21:11:53.097324 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28536): Terminating (SIGTERM)
21:11:53.140714 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28539): Terminating (SIGTERM)
21:11:53.151070 ---      ParallelTerminationStrategy: PID 28529 died...
21:11:53.208916 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28529): Terminated: ok {rc=0}
21:11:53.219194 ---      ParallelTerminationStrategy: PID 28530 died...
21:11:53.276079 run iperf3-srv_10.42.42.10(pid=28530): Terminated {rc=256}
21:11:53.287012 ---      ParallelTerminationStrategy: PID 28533 died...
21:11:53.344551 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28533): Terminated: ok {rc=0}
21:11:53.354855 ---      ParallelTerminationStrategy: PID 28536 died...
21:11:53.412132 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28536): Terminated: ok {rc=0}
21:11:53.422428 ---      ParallelTerminationStrategy: PID 28539 died...
21:11:53.479906 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28539): Terminated: ok {rc=0}
21:11:53.569392 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module>
    setup_run_iperf3_test_parallel(1)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=28537): Process ended prematurely: osmo-stp_10.42.42.5(pid=28537) [trial-2382↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28537)]