Skip to content

Failed

gprs:trx-lms+mod-bts0-egprs.ping.py (from gprs_trx-lms+mod-bts0-egprs)

Failing for the past 251 builds (Since #2139 )
Took 7 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=19676): Process ended prematurely: osmo-stp_10.42.42.5(pid=19676) [trial-2389↪gprs:trx-lms+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=19676)]

Standard Output

----------------------------------------------
trial-2389 gprs:trx-lms+mod-bts0-egprs ping.py
----------------------------------------------
12:23:28.803368 tst      gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
12:23:28.815317 tst      gprs:trx-lms+mod-bts0-egprs: Using 1 x bts (candidates: 1)
12:23:28.961278 tst                          ping.py: using LAC 33918
12:23:29.089501 tst                          ping.py: using RAC 3
12:23:29.218137 tst                          ping.py: using CellId 33918
12:23:29.344857 tst                          ping.py: using BVCI 33919
12:23:29.369744 tst      gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
12:23:29.381159 tst      gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
12:23:29.392234 tst      gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
12:23:29.403539 tst      gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
12:23:29.415105 tst      gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
12:23:29.426572 tst      gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
12:23:29.438259 tst      gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
12:23:29.449743 tst      gprs:trx-lms+mod-bts0-egprs: Using 1 x modem (candidates: 4)
12:23:29.743798 tst                       ping.py:19: start network...
12:23:29.878262 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
12:23:30.386913 run         create_hlr_db(pid=19670): Launched
12:23:30.574566 bus                          /gobi_6: Setting Powered False
12:23:31.597324 run         create_hlr_db(pid=19670): Terminated: ok {rc=0}
12:23:32.118289 run pcap-recorder_any(filters='host 10.42.42.2')(pid=19672): Launched
12:23:32.446029 run   osmo-hlr_10.42.42.2(pid=19673): Launched
12:23:32.564337 run              osmo-stp_10.42.42.5: Starting osmo-stp
12:23:33.129966 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=19675): Launched
12:23:33.453736 run   osmo-stp_10.42.42.5(pid=19676): Launched
12:23:33.570997 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
12:23:34.135778 run pcap-recorder_any(filters='host 10.42.42.6')(pid=19678): Launched
12:23:34.250807 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
12:23:34.531463 run              patchelf(pid=19679): Launched
12:23:34.719870 run   osmo-stp_10.42.42.5(pid=19676): ERR: Terminated: ERROR {rc=1}  [trial-2389↪gprs:trx-lms+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=19676)]
12:23:34.858154 run   osmo-stp_10.42.42.5(pid=19676): stdout: 
| (launched: 2022-12-13_12:23:33.293427)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
12:23:34.997190 run   osmo-stp_10.42.42.5(pid=19676): stderr: 
| �[0;m�[38;5;43m20221213122333484 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221213122333484 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221213122333484 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221213122333485 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221213122333485 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221213122333485 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221213122333485 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
12:23:35.131032 run   osmo-stp_10.42.42.5(pid=19676): stdout: 
| (launched: 2022-12-13_12:23:33.293427)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
12:23:35.263390 run   osmo-stp_10.42.42.5(pid=19676): stderr: 
| �[0;m�[38;5;43m20221213122333484 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221213122333484 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221213122333484 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221213122333485 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221213122333485 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221213122333485 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221213122333485 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
12:23:35.417218 run              patchelf(pid=19679): Terminating (SIGINT)
12:23:35.597824 run              patchelf(pid=19679): Terminated: ok {rc=0}
12:23:35.630477 tst                       ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=19676): Process ended prematurely: osmo-stp_10.42.42.5(pid=19676) [trial-2389↪gprs:trx-lms+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=19676)]  [trial-2389↪gprs:trx-lms+mod-bts0-egprs↪ping.py:22]
12:23:35.639989 tst                       ping.py:22: Test FAILED (6.8 sec)
12:23:35.703586 run   osmo-hlr_10.42.42.2(pid=19673): ERR: Terminated: ERROR {rc=237}  [trial-2389↪gprs:trx-lms+mod-bts0-egprs↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=19673)]
12:23:35.755399 run   osmo-hlr_10.42.42.2(pid=19673): stdout: 
| (launched: 2022-12-13_12:23:32.285793) 
12:23:35.807818 run   osmo-hlr_10.42.42.2(pid=19673): stderr: 
| �[0;m�[1;31m20221213122332481 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221213122332481 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221213122332481 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221213122332481 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221213122332482 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221213122332482 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221213122332494 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2389/run.2022-12-13_11-32-52/gprs:trx-lms+mod-bts0-egprs/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221213122332503 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221213122332503 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221213122332503 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
12:23:35.852549 run pcap-recorder_any(filters='host 10.42.42.2')(pid=19672): Terminating (SIGTERM)
12:23:35.894793 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=19675): Terminating (SIGTERM)
12:23:35.937112 run pcap-recorder_any(filters='host 10.42.42.6')(pid=19678): Terminating (SIGTERM)
12:23:35.946903 ---      ParallelTerminationStrategy: PID 19672 died...
12:23:36.004471 run pcap-recorder_any(filters='host 10.42.42.2')(pid=19672): Terminated: ok {rc=0}
12:23:36.014854 ---      ParallelTerminationStrategy: PID 19675 died...
12:23:36.071720 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=19675): Terminated: ok {rc=0}
12:23:36.081903 ---      ParallelTerminationStrategy: PID 19678 died...
12:23:36.138545 run pcap-recorder_any(filters='host 10.42.42.6')(pid=19678): Terminated: ok {rc=0}
12:23:36.225652 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module>
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=19676): Process ended prematurely: osmo-stp_10.42.42.5(pid=19676) [trial-2389↪gprs:trx-lms+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=19676)]