Skip to content

Failed

gprs:trx-lms+mod-bts0-egprs.ping.py (from gprs_trx-lms+mod-bts0-egprs)

Failing for the past 252 builds (Since #2139 )
Took 7 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=28277): Process ended prematurely: osmo-stp_10.42.42.5(pid=28277) [trial-2390↪gprs:trx-lms+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28277)]

Standard Output

----------------------------------------------
trial-2390 gprs:trx-lms+mod-bts0-egprs ping.py
----------------------------------------------
13:51:26.840390 tst      gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
13:51:26.851704 tst      gprs:trx-lms+mod-bts0-egprs: Using 1 x bts (candidates: 1)
13:51:26.989368 tst                          ping.py: using LAC 34379
13:51:27.106150 tst                          ping.py: using RAC 209
13:51:27.222718 tst                          ping.py: using CellId 34379
13:51:27.339275 tst                          ping.py: using BVCI 34380
13:51:27.362149 tst      gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
13:51:27.372868 tst      gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
13:51:27.383451 tst      gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
13:51:27.394036 tst      gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
13:51:27.404563 tst      gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
13:51:27.415146 tst      gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
13:51:27.425951 tst      gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
13:51:27.436531 tst      gprs:trx-lms+mod-bts0-egprs: Using 1 x modem (candidates: 4)
13:51:27.725188 tst                       ping.py:19: start network...
13:51:27.857430 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
13:51:28.358999 run         create_hlr_db(pid=28271): Launched
13:51:28.543037 bus                          /gobi_6: Setting Powered False
13:51:29.563295 run         create_hlr_db(pid=28271): Terminated: ok {rc=0}
13:51:29.990808 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28273): Launched
13:51:30.311790 run   osmo-hlr_10.42.42.2(pid=28274): Launched
13:51:30.429430 run              osmo-stp_10.42.42.5: Starting osmo-stp
13:51:31.003690 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28276): Launched
13:51:31.462107 run   osmo-stp_10.42.42.5(pid=28277): Launched
13:51:31.660452 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
13:51:32.207636 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28279): Launched
13:51:32.315917 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
13:51:32.580911 run              patchelf(pid=28280): Launched
13:51:32.756375 run   osmo-stp_10.42.42.5(pid=28277): ERR: Terminated: ERROR {rc=1}  [trial-2390↪gprs:trx-lms+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28277)]
13:51:32.885132 run   osmo-stp_10.42.42.5(pid=28277): stdout: 
| (launched: 2022-12-13_13:51:31.158848)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
13:51:33.014033 run   osmo-stp_10.42.42.5(pid=28277): stderr: 
| �[0;m�[38;5;43m20221213135131378 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221213135131378 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221213135131378 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221213135131378 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221213135131379 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221213135131379 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221213135131379 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
13:51:33.137960 run   osmo-stp_10.42.42.5(pid=28277): stdout: 
| (launched: 2022-12-13_13:51:31.158848)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
13:51:33.260352 run   osmo-stp_10.42.42.5(pid=28277): stderr: 
| �[0;m�[38;5;43m20221213135131378 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221213135131378 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221213135131378 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221213135131378 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221213135131379 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221213135131379 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221213135131379 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
13:51:33.403467 run              patchelf(pid=28280): Terminating (SIGINT)
13:51:33.571696 run              patchelf(pid=28280): Terminated: ok {rc=0}
13:51:33.602478 tst                       ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=28277): Process ended prematurely: osmo-stp_10.42.42.5(pid=28277) [trial-2390↪gprs:trx-lms+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28277)]  [trial-2390↪gprs:trx-lms+mod-bts0-egprs↪ping.py:22]
13:51:33.611224 tst                       ping.py:22: Test FAILED (6.8 sec)
13:51:33.671501 run   osmo-hlr_10.42.42.2(pid=28274): ERR: Terminated: ERROR {rc=237}  [trial-2390↪gprs:trx-lms+mod-bts0-egprs↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=28274)]
13:51:33.720361 run   osmo-hlr_10.42.42.2(pid=28274): stdout: 
| (launched: 2022-12-13_13:51:30.153083) 
13:51:33.769898 run   osmo-hlr_10.42.42.2(pid=28274): stderr: 
| �[0;m�[1;31m20221213135130348 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221213135130348 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221213135130348 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221213135130348 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221213135130348 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221213135130348 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221213135130364 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2390/run.2022-12-13_13-01-08/gprs:trx-lms+mod-bts0-egprs/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221213135130374 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221213135130374 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221213135130374 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
13:51:33.812344 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28273): Terminating (SIGTERM)
13:51:33.852353 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28276): Terminating (SIGTERM)
13:51:33.892406 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28279): Terminating (SIGTERM)
13:51:33.902238 ---      ParallelTerminationStrategy: PID 28273 died...
13:51:33.957355 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28273): Terminated: ok {rc=0}
13:51:33.967133 ---      ParallelTerminationStrategy: PID 28276 died...
13:51:34.020743 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28276): Terminated: ok {rc=0}
13:51:34.030522 ---      ParallelTerminationStrategy: PID 28279 died...
13:51:34.084296 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28279): Terminated: ok {rc=0}
13:51:34.173331 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module>
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=28277): Process ended prematurely: osmo-stp_10.42.42.5(pid=28277) [trial-2390↪gprs:trx-lms+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28277)]