Skip to content
[Jenkins]Jenkins
log in | sign up

Failed

gprs:trx-lms-limenet-micro+mod-bts0-egprs.iperf3.py (from gprs_trx-lms-limenet-micro+mod-bts0-egprs)

Failing for the past 258 builds (Since #2139 )
Took 8 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=17138): Process ended prematurely: osmo-stp_10.42.42.5(pid=17138) [trial-2396↪gprs:trx-lms-limenet-micro+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=17138)]

Standard Output

----------------------------------------------
trial-2396 gprs:trx-lms-limenet-micro+mod-bts0-egprs iperf3.py
----------------------------------------------
00:08:51.840392 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
00:08:51.852600 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x bts (candidates: 1)
00:08:51.989041 tst                        iperf3.py: using LAC 37185
00:08:52.105601 tst                        iperf3.py: using RAC 210
00:08:52.224618 tst                        iperf3.py: using CellId 37185
00:08:52.342608 tst                        iperf3.py: using BVCI 37186
00:08:52.365503 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
00:08:52.376591 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
00:08:52.387598 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
00:08:52.398572 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
00:08:52.409449 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
00:08:52.420259 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
00:08:52.431295 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
00:08:52.442110 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
00:08:52.453062 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x modem (candidates: 4)
00:08:52.734529 tst                      iperf3.py:8: start iperfv3 server 10.42.42.10:5003...
00:08:52.859081 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
00:08:53.168683 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=17130): Launched
00:08:53.425415 run iperf3-srv_10.42.42.10(pid=17131): Launched
00:08:53.607607 tst                      iperf3.py:8: start network...
00:08:53.732407 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
00:08:54.213329 run         create_hlr_db(pid=17132): Launched
00:08:54.385374 bus                          /gobi_6: Setting Powered False
00:08:55.407848 run         create_hlr_db(pid=17132): Terminated: ok {rc=0}
00:08:55.806524 run pcap-recorder_any(filters='host 10.42.42.2')(pid=17134): Launched
00:08:56.106833 run   osmo-hlr_10.42.42.2(pid=17135): Launched
00:08:56.223351 run              osmo-stp_10.42.42.5: Starting osmo-stp
00:08:56.751236 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=17137): Launched
00:08:57.049953 run   osmo-stp_10.42.42.5(pid=17138): Launched
00:08:57.158979 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
00:08:57.678116 run pcap-recorder_any(filters='host 10.42.42.6')(pid=17140): Launched
00:08:57.783980 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
00:08:58.045573 run              patchelf(pid=17141): Launched
00:08:58.219855 run   osmo-stp_10.42.42.5(pid=17138): ERR: Terminated: ERROR {rc=1}  [trial-2396↪gprs:trx-lms-limenet-micro+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=17138)]
00:08:58.347409 run   osmo-stp_10.42.42.5(pid=17138): stdout: 
| (launched: 2022-12-14_00:08:56.903268)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
00:08:58.475229 run   osmo-stp_10.42.42.5(pid=17138): stderr: 
| �[0;m�[38;5;43m20221214000857074 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221214000857074 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221214000857075 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221214000857075 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221214000857076 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221214000857076 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221214000857076 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
00:08:58.598354 run   osmo-stp_10.42.42.5(pid=17138): stdout: 
| (launched: 2022-12-14_00:08:56.903268)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
00:08:58.720334 run   osmo-stp_10.42.42.5(pid=17138): stderr: 
| �[0;m�[38;5;43m20221214000857074 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221214000857074 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221214000857075 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221214000857075 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221214000857076 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221214000857076 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221214000857076 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
00:08:58.862952 run              patchelf(pid=17141): Terminating (SIGINT)
00:08:59.030543 run              patchelf(pid=17141): Terminated: ok {rc=0}
00:08:59.061877 tst                      iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=17138): Process ended prematurely: osmo-stp_10.42.42.5(pid=17138) [trial-2396↪gprs:trx-lms-limenet-micro+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=17138)]  [trial-2396↪gprs:trx-lms-limenet-micro+mod-bts0-egprs↪iperf3.py:8]
00:08:59.071184 tst                      iperf3.py:8: Test FAILED (7.3 sec)
00:08:59.130118 run   osmo-hlr_10.42.42.2(pid=17135): ERR: Terminated: ERROR {rc=237}  [trial-2396↪gprs:trx-lms-limenet-micro+mod-bts0-egprs↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=17135)]
00:08:59.178292 run   osmo-hlr_10.42.42.2(pid=17135): stdout: 
| (launched: 2022-12-14_00:08:55.959651) 
00:08:59.227186 run   osmo-hlr_10.42.42.2(pid=17135): stderr: 
| �[0;m�[1;31m20221214000856138 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221214000856138 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221214000856138 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221214000856138 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221214000856138 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221214000856138 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221214000856151 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2396/run.2022-12-13_23-11-51/gprs:trx-lms-limenet-micro+mod-bts0-egprs/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221214000856161 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221214000856162 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221214000856162 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
00:08:59.269001 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=17130): Terminating (SIGTERM)
00:08:59.308140 run iperf3-srv_10.42.42.10(pid=17131): Terminating (SIGTERM)
00:08:59.347387 run pcap-recorder_any(filters='host 10.42.42.2')(pid=17134): Terminating (SIGTERM)
00:08:59.386631 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=17137): Terminating (SIGTERM)
00:08:59.425762 run pcap-recorder_any(filters='host 10.42.42.6')(pid=17140): Terminating (SIGTERM)
00:08:59.434435 ---      ParallelTerminationStrategy: PID 17130 died...
00:08:59.486828 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=17130): Terminated: ok {rc=0}
00:08:59.496314 ---      ParallelTerminationStrategy: PID 17131 died...
00:08:59.548130 run iperf3-srv_10.42.42.10(pid=17131): Terminated {rc=256}
00:08:59.557587 ---      ParallelTerminationStrategy: PID 17134 died...
00:08:59.609747 run pcap-recorder_any(filters='host 10.42.42.2')(pid=17134): Terminated: ok {rc=0}
00:08:59.619118 ---      ParallelTerminationStrategy: PID 17137 died...
00:08:59.671310 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=17137): Terminated: ok {rc=0}
00:08:59.680797 ---      ParallelTerminationStrategy: PID 17140 died...
00:08:59.733017 run pcap-recorder_any(filters='host 10.42.42.6')(pid=17140): Terminated: ok {rc=0}
00:08:59.820539 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module>
    setup_run_iperf3_test_parallel(1)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=17138): Process ended prematurely: osmo-stp_10.42.42.5(pid=17138) [trial-2396↪gprs:trx-lms-limenet-micro+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=17138)]