Skip to content
[Jenkins]Jenkins
log in | sign up

Failed

gprs:trx-lms-limenet-micro+mod-bts0-egprs.iperf3.py (from gprs_trx-lms-limenet-micro+mod-bts0-egprs)

Failing for the past 259 builds (Since #2139 )
Took 8 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=24723): Process ended prematurely: osmo-stp_10.42.42.5(pid=24723) [trial-2397↪gprs:trx-lms-limenet-micro+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24723)]

Standard Output

----------------------------------------------
trial-2397 gprs:trx-lms-limenet-micro+mod-bts0-egprs iperf3.py
----------------------------------------------
01:37:50.293104 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
01:37:50.305353 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x bts (candidates: 1)
01:37:50.446018 tst                        iperf3.py: using LAC 37646
01:37:50.564573 tst                        iperf3.py: using RAC 161
01:37:50.683608 tst                        iperf3.py: using CellId 37646
01:37:50.800594 tst                        iperf3.py: using BVCI 37647
01:37:50.823223 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
01:37:50.834310 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
01:37:50.845133 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
01:37:50.855922 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
01:37:50.867095 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
01:37:50.878507 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
01:37:50.889952 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
01:37:50.901078 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
01:37:50.912371 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x modem (candidates: 4)
01:37:51.202383 tst                      iperf3.py:8: start iperfv3 server 10.42.42.10:5003...
01:37:51.335033 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
01:37:51.665296 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24715): Launched
01:37:51.938451 run iperf3-srv_10.42.42.10(pid=24716): Launched
01:37:52.132765 tst                      iperf3.py:8: start network...
01:37:52.265334 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
01:37:52.770585 run         create_hlr_db(pid=24717): Launched
01:37:52.954467 bus                          /gobi_6: Setting Powered False
01:37:53.976454 run         create_hlr_db(pid=24717): Terminated: ok {rc=0}
01:37:54.378261 run pcap-recorder_any(filters='host 10.42.42.2')(pid=24719): Launched
01:37:54.676283 run   osmo-hlr_10.42.42.2(pid=24720): Launched
01:37:54.785456 run              osmo-stp_10.42.42.5: Starting osmo-stp
01:37:55.302933 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=24722): Launched
01:37:55.599877 run   osmo-stp_10.42.42.5(pid=24723): Launched
01:37:55.707363 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
01:37:56.225502 run pcap-recorder_any(filters='host 10.42.42.6')(pid=24725): Launched
01:37:56.331121 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
01:37:56.590430 run              patchelf(pid=24726): Launched
01:37:56.763976 run   osmo-stp_10.42.42.5(pid=24723): ERR: Terminated: ERROR {rc=1}  [trial-2397↪gprs:trx-lms-limenet-micro+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24723)]
01:37:56.891348 run   osmo-stp_10.42.42.5(pid=24723): stdout: 
| (launched: 2022-12-14_01:37:55.452758)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
01:37:57.019069 run   osmo-stp_10.42.42.5(pid=24723): stderr: 
| �[0;m�[38;5;43m20221214013755618 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221214013755618 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221214013755619 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221214013755619 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221214013755620 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221214013755620 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221214013755620 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
01:37:57.141309 run   osmo-stp_10.42.42.5(pid=24723): stdout: 
| (launched: 2022-12-14_01:37:55.452758)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
01:37:57.262059 run   osmo-stp_10.42.42.5(pid=24723): stderr: 
| �[0;m�[38;5;43m20221214013755618 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221214013755618 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221214013755619 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221214013755619 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221214013755620 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221214013755620 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221214013755620 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
01:37:57.403052 run              patchelf(pid=24726): Terminating (SIGINT)
01:37:57.569502 run              patchelf(pid=24726): Terminated: ok {rc=0}
01:37:57.600270 tst                      iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=24723): Process ended prematurely: osmo-stp_10.42.42.5(pid=24723) [trial-2397↪gprs:trx-lms-limenet-micro+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24723)]  [trial-2397↪gprs:trx-lms-limenet-micro+mod-bts0-egprs↪iperf3.py:8]
01:37:57.609488 tst                      iperf3.py:8: Test FAILED (7.4 sec)
01:37:57.668543 run   osmo-hlr_10.42.42.2(pid=24720): ERR: Terminated: ERROR {rc=237}  [trial-2397↪gprs:trx-lms-limenet-micro+mod-bts0-egprs↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=24720)]
01:37:57.716578 run   osmo-hlr_10.42.42.2(pid=24720): stdout: 
| (launched: 2022-12-14_01:37:54.528537) 
01:37:57.765257 run   osmo-hlr_10.42.42.2(pid=24720): stderr: 
| �[0;m�[1;31m20221214013754701 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221214013754701 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221214013754701 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221214013754701 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221214013754701 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221214013754701 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221214013754714 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2397/run.2022-12-14_00-40-22/gprs:trx-lms-limenet-micro+mod-bts0-egprs/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221214013754722 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221214013754722 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221214013754722 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
01:37:57.806818 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24715): Terminating (SIGTERM)
01:37:57.845825 run iperf3-srv_10.42.42.10(pid=24716): Terminating (SIGTERM)
01:37:57.884822 run pcap-recorder_any(filters='host 10.42.42.2')(pid=24719): Terminating (SIGTERM)
01:37:57.923917 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=24722): Terminating (SIGTERM)
01:37:57.962961 run pcap-recorder_any(filters='host 10.42.42.6')(pid=24725): Terminating (SIGTERM)
01:37:57.971999 ---      ParallelTerminationStrategy: PID 24715 died...
01:37:58.024352 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24715): Terminated: ok {rc=0}
01:37:58.033789 ---      ParallelTerminationStrategy: PID 24716 died...
01:37:58.085783 run iperf3-srv_10.42.42.10(pid=24716): Terminated {rc=256}
01:37:58.095177 ---      ParallelTerminationStrategy: PID 24719 died...
01:37:58.147166 run pcap-recorder_any(filters='host 10.42.42.2')(pid=24719): Terminated: ok {rc=0}
01:37:58.156477 ---      ParallelTerminationStrategy: PID 24722 died...
01:37:58.208532 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=24722): Terminated: ok {rc=0}
01:37:58.218010 ---      ParallelTerminationStrategy: PID 24725 died...
01:37:58.270243 run pcap-recorder_any(filters='host 10.42.42.6')(pid=24725): Terminated: ok {rc=0}
01:37:58.358519 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module>
    setup_run_iperf3_test_parallel(1)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=24723): Process ended prematurely: osmo-stp_10.42.42.5(pid=24723) [trial-2397↪gprs:trx-lms-limenet-micro+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24723)]