Skip to content
[Jenkins]Jenkins
log in | sign up

Failed

gprs:trx-sysmocell5000+mod-bts0-dynts-osmo.iperf3.py (from gprs_trx-sysmocell5000+mod-bts0-dynts-osmo)

Failing for the past 258 builds (Since #2139 )
Took 8 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=14696): Process ended prematurely: osmo-stp_10.42.42.5(pid=14696) [trial-2396↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14696)]

Standard Output

----------------------------------------------
trial-2396 gprs:trx-sysmocell5000+mod-bts0-dynts-osmo iperf3.py
----------------------------------------------
23:46:02.517468 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
23:46:02.529666 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1)
23:46:02.695958 tst                        iperf3.py: using LAC 37062
23:46:02.821477 tst                        iperf3.py: using RAC 87
23:46:02.954580 tst                        iperf3.py: using CellId 37062
23:46:03.090250 tst                        iperf3.py: using BVCI 37063
23:46:03.114530 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
23:46:03.125988 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
23:46:03.137382 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
23:46:03.148518 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
23:46:03.160078 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
23:46:03.171621 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
23:46:03.183362 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
23:46:03.194843 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
23:46:03.206542 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4)
23:46:03.481132 tst                      iperf3.py:8: start iperfv3 server 10.42.42.10:5003...
23:46:03.605134 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
23:46:03.913321 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14688): Launched
23:46:04.169194 run iperf3-srv_10.42.42.10(pid=14689): Launched
23:46:04.351256 tst                      iperf3.py:8: start network...
23:46:04.475277 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
23:46:04.955195 run         create_hlr_db(pid=14690): Launched
23:46:05.138697 bus                          /gobi_6: Setting Powered False
23:46:06.161180 run         create_hlr_db(pid=14690): Terminated: ok {rc=0}
23:46:06.583095 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14692): Launched
23:46:06.901865 run   osmo-hlr_10.42.42.2(pid=14693): Launched
23:46:07.022100 run              osmo-stp_10.42.42.5: Starting osmo-stp
23:46:07.576528 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14695): Launched
23:46:07.894489 run   osmo-stp_10.42.42.5(pid=14696): Launched
23:46:08.011134 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
23:46:08.566388 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14698): Launched
23:46:08.680499 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
23:46:08.951129 run              patchelf(pid=14699): Launched
23:46:09.126884 run   osmo-stp_10.42.42.5(pid=14696): ERR: Terminated: ERROR {rc=1}  [trial-2396↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14696)]
23:46:09.254888 run   osmo-stp_10.42.42.5(pid=14696): stdout: 
| (launched: 2022-12-13_23:46:07.738969)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
23:46:09.383379 run   osmo-stp_10.42.42.5(pid=14696): stderr: 
| �[0;m�[38;5;43m20221213234607933 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221213234607933 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221213234607934 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221213234607934 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221213234607934 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221213234607934 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221213234607934 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
23:46:09.507327 run   osmo-stp_10.42.42.5(pid=14696): stdout: 
| (launched: 2022-12-13_23:46:07.738969)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
23:46:09.630247 run   osmo-stp_10.42.42.5(pid=14696): stderr: 
| �[0;m�[38;5;43m20221213234607933 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221213234607933 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221213234607934 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221213234607934 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221213234607934 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221213234607934 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221213234607934 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
23:46:09.773296 run              patchelf(pid=14699): Terminating (SIGINT)
23:46:09.943354 run              patchelf(pid=14699): Terminated: ok {rc=0}
23:46:09.974159 tst                      iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=14696): Process ended prematurely: osmo-stp_10.42.42.5(pid=14696) [trial-2396↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14696)]  [trial-2396↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪iperf3.py:8]
23:46:09.983333 tst                      iperf3.py:8: Test FAILED (7.5 sec)
23:46:10.042471 run   osmo-hlr_10.42.42.2(pid=14693): ERR: Terminated: ERROR {rc=237}  [trial-2396↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=14693)]
23:46:10.090757 run   osmo-hlr_10.42.42.2(pid=14693): stdout: 
| (launched: 2022-12-13_23:46:06.746241) 
23:46:10.139651 run   osmo-hlr_10.42.42.2(pid=14693): stderr: 
| �[0;m�[1;31m20221213234606946 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221213234606946 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221213234606946 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221213234606946 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221213234606946 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221213234606946 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221213234606959 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2396/run.2022-12-13_23-11-51/gprs:trx-sysmocell5000+mod-bts0-dynts-osmo/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221213234606968 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221213234606968 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221213234606968 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
23:46:10.181264 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14688): Terminating (SIGTERM)
23:46:10.220175 run iperf3-srv_10.42.42.10(pid=14689): Terminating (SIGTERM)
23:46:10.259291 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14692): Terminating (SIGTERM)
23:46:10.298536 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14695): Terminating (SIGTERM)
23:46:10.337742 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14698): Terminating (SIGTERM)
23:46:10.346775 ---      ParallelTerminationStrategy: PID 14688 died...
23:46:10.399377 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14688): Terminated: ok {rc=0}
23:46:10.408830 ---      ParallelTerminationStrategy: PID 14689 died...
23:46:10.460934 run iperf3-srv_10.42.42.10(pid=14689): Terminated {rc=256}
23:46:10.470282 ---      ParallelTerminationStrategy: PID 14692 died...
23:46:10.522456 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14692): Terminated: ok {rc=0}
23:46:10.531784 ---      ParallelTerminationStrategy: PID 14695 died...
23:46:10.583915 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14695): Terminated: ok {rc=0}
23:46:10.593339 ---      ParallelTerminationStrategy: PID 14698 died...
23:46:10.645217 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14698): Terminated: ok {rc=0}
23:46:10.732290 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module>
    setup_run_iperf3_test_parallel(1)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=14696): Process ended prematurely: osmo-stp_10.42.42.5(pid=14696) [trial-2396↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14696)]