Skip to content
[Jenkins]Jenkins
log in | sign up

Failed

gprs:trx-sysmocell5000+mod-bts0-dynts-osmo.iperf3.py (from gprs_trx-sysmocell5000+mod-bts0-dynts-osmo)

Failing for the past 259 builds (Since #2139 )
Took 8 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=22838): Process ended prematurely: osmo-stp_10.42.42.5(pid=22838) [trial-2397↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22838)]

Standard Output

----------------------------------------------
trial-2397 gprs:trx-sysmocell5000+mod-bts0-dynts-osmo iperf3.py
----------------------------------------------
01:14:51.249976 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
01:14:51.261806 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1)
01:14:51.433307 tst                        iperf3.py: using LAC 37523
01:14:51.564084 tst                        iperf3.py: using RAC 38
01:14:51.694696 tst                        iperf3.py: using CellId 37523
01:14:51.823116 tst                        iperf3.py: using BVCI 37524
01:14:51.848483 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
01:14:51.860207 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
01:14:51.871696 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
01:14:51.883132 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
01:14:51.894887 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
01:14:51.906589 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
01:14:51.918786 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
01:14:51.930460 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
01:14:51.942319 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4)
01:14:52.224378 tst                      iperf3.py:8: start iperfv3 server 10.42.42.10:5003...
01:14:52.352407 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
01:14:52.674664 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22830): Launched
01:14:52.942100 run iperf3-srv_10.42.42.10(pid=22831): Launched
01:14:53.129767 tst                      iperf3.py:8: start network...
01:14:53.257866 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
01:14:53.753030 run         create_hlr_db(pid=22832): Launched
01:14:53.930554 bus                          /gobi_6: Setting Powered False
01:14:54.951879 run         create_hlr_db(pid=22832): Terminated: ok {rc=0}
01:14:55.391453 run pcap-recorder_any(filters='host 10.42.42.2')(pid=22834): Launched
01:14:55.722554 run   osmo-hlr_10.42.42.2(pid=22835): Launched
01:14:55.846841 run              osmo-stp_10.42.42.5: Starting osmo-stp
01:14:56.423960 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=22837): Launched
01:14:56.755037 run   osmo-stp_10.42.42.5(pid=22838): Launched
01:14:56.875246 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
01:14:57.452298 run pcap-recorder_any(filters='host 10.42.42.6')(pid=22840): Launched
01:14:57.570439 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
01:14:57.860042 run              patchelf(pid=22841): Launched
01:14:58.053153 run   osmo-stp_10.42.42.5(pid=22838): ERR: Terminated: ERROR {rc=1}  [trial-2397↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22838)]
01:14:58.194950 run   osmo-stp_10.42.42.5(pid=22838): stdout: 
| (launched: 2022-12-14_01:14:56.591140)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
01:14:58.336624 run   osmo-stp_10.42.42.5(pid=22838): stderr: 
| �[0;m�[38;5;43m20221214011456783 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221214011456783 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221214011456783 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221214011456783 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221214011456784 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221214011456784 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221214011456784 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
01:14:58.473270 run   osmo-stp_10.42.42.5(pid=22838): stdout: 
| (launched: 2022-12-14_01:14:56.591140)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
01:14:58.608221 run   osmo-stp_10.42.42.5(pid=22838): stderr: 
| �[0;m�[38;5;43m20221214011456783 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221214011456783 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221214011456783 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221214011456783 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221214011456784 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221214011456784 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221214011456784 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
01:14:58.765727 run              patchelf(pid=22841): Terminating (SIGINT)
01:14:58.951087 run              patchelf(pid=22841): Terminated: ok {rc=0}
01:14:58.985004 tst                      iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=22838): Process ended prematurely: osmo-stp_10.42.42.5(pid=22838) [trial-2397↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22838)]  [trial-2397↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪iperf3.py:8]
01:14:58.995145 tst                      iperf3.py:8: Test FAILED (7.8 sec)
01:14:59.059156 run   osmo-hlr_10.42.42.2(pid=22835): ERR: Terminated: ERROR {rc=237}  [trial-2397↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=22835)]
01:14:59.111279 run   osmo-hlr_10.42.42.2(pid=22835): stdout: 
| (launched: 2022-12-14_01:14:55.559181) 
01:14:59.164139 run   osmo-hlr_10.42.42.2(pid=22835): stderr: 
| �[0;m�[1;31m20221214011455756 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221214011455756 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221214011455756 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221214011455756 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221214011455756 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221214011455756 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221214011455769 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2397/run.2022-12-14_00-40-22/gprs:trx-sysmocell5000+mod-bts0-dynts-osmo/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221214011455780 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221214011455780 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221214011455780 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
01:14:59.209361 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22830): Terminating (SIGTERM)
01:14:59.252362 run iperf3-srv_10.42.42.10(pid=22831): Terminating (SIGTERM)
01:14:59.294914 run pcap-recorder_any(filters='host 10.42.42.2')(pid=22834): Terminating (SIGTERM)
01:14:59.337358 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=22837): Terminating (SIGTERM)
01:14:59.380071 run pcap-recorder_any(filters='host 10.42.42.6')(pid=22840): Terminating (SIGTERM)
01:14:59.389945 ---      ParallelTerminationStrategy: PID 22830 died...
01:14:59.446890 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22830): Terminated: ok {rc=0}
01:14:59.457078 ---      ParallelTerminationStrategy: PID 22831 died...
01:14:59.513717 run iperf3-srv_10.42.42.10(pid=22831): Terminated {rc=256}
01:14:59.523914 ---      ParallelTerminationStrategy: PID 22834 died...
01:14:59.580659 run pcap-recorder_any(filters='host 10.42.42.2')(pid=22834): Terminated: ok {rc=0}
01:14:59.590994 ---      ParallelTerminationStrategy: PID 22837 died...
01:14:59.647883 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=22837): Terminated: ok {rc=0}
01:14:59.658133 ---      ParallelTerminationStrategy: PID 22840 died...
01:14:59.714913 run pcap-recorder_any(filters='host 10.42.42.6')(pid=22840): Terminated: ok {rc=0}
01:14:59.802955 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module>
    setup_run_iperf3_test_parallel(1)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=22838): Process ended prematurely: osmo-stp_10.42.42.5(pid=22838) [trial-2397↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22838)]