Skip to content
[Jenkins]Jenkins
log in | sign up

Failed

gprs:trx-sysmocell5000+mod-bts0-dynts-osmo.iperf3.py (from gprs_trx-sysmocell5000+mod-bts0-dynts-osmo)

Failing for the past 262 builds (Since #2139 )
Took 8 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=15440): Process ended prematurely: osmo-stp_10.42.42.5(pid=15440) [trial-2400↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15440)]

Standard Output

----------------------------------------------
trial-2400 gprs:trx-sysmocell5000+mod-bts0-dynts-osmo iperf3.py
----------------------------------------------
06:03:18.883906 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
06:03:18.896220 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1)
06:03:19.069477 tst                        iperf3.py: using LAC 38906
06:03:19.201653 tst                        iperf3.py: using RAC 146
06:03:19.331257 tst                        iperf3.py: using CellId 38906
06:03:19.457463 tst                        iperf3.py: using BVCI 38907
06:03:19.481666 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
06:03:19.492819 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
06:03:19.504028 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
06:03:19.515080 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
06:03:19.526690 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
06:03:19.537973 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
06:03:19.549359 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
06:03:19.560379 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
06:03:19.571701 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4)
06:03:19.875091 tst                      iperf3.py:8: start iperfv3 server 10.42.42.10:5003...
06:03:20.015814 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
06:03:20.363603 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=15432): Launched
06:03:20.652180 run iperf3-srv_10.42.42.10(pid=15433): Launched
06:03:20.859677 tst                      iperf3.py:8: start network...
06:03:21.000668 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
06:03:21.536396 run         create_hlr_db(pid=15434): Launched
06:03:21.730123 bus                          /gobi_6: Setting Powered False
06:03:22.750888 run         create_hlr_db(pid=15434): Terminated: ok {rc=0}
06:03:23.173129 run pcap-recorder_any(filters='host 10.42.42.2')(pid=15436): Launched
06:03:23.486694 run   osmo-hlr_10.42.42.2(pid=15437): Launched
06:03:23.610169 run              osmo-stp_10.42.42.5: Starting osmo-stp
06:03:24.165123 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=15439): Launched
06:03:24.478735 run   osmo-stp_10.42.42.5(pid=15440): Launched
06:03:24.594007 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
06:03:25.141978 run pcap-recorder_any(filters='host 10.42.42.6')(pid=15442): Launched
06:03:25.254747 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
06:03:25.529224 run              patchelf(pid=15443): Launched
06:03:25.712803 run   osmo-stp_10.42.42.5(pid=15440): ERR: Terminated: ERROR {rc=1}  [trial-2400↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15440)]
06:03:25.847524 run   osmo-stp_10.42.42.5(pid=15440): stdout: 
| (launched: 2022-12-14_06:03:24.324642)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
06:03:25.982582 run   osmo-stp_10.42.42.5(pid=15440): stderr: 
| �[0;m�[38;5;43m20221214060324497 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221214060324497 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221214060324497 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221214060324497 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221214060324498 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221214060324498 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221214060324498 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
06:03:26.112286 run   osmo-stp_10.42.42.5(pid=15440): stdout: 
| (launched: 2022-12-14_06:03:24.324642)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
06:03:26.241211 run   osmo-stp_10.42.42.5(pid=15440): stderr: 
| �[0;m�[38;5;43m20221214060324497 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221214060324497 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221214060324497 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221214060324497 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221214060324498 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221214060324498 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221214060324498 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
06:03:26.391237 run              patchelf(pid=15443): Terminating (SIGINT)
06:03:26.567826 run              patchelf(pid=15443): Terminated: ok {rc=0}
06:03:26.600197 tst                      iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=15440): Process ended prematurely: osmo-stp_10.42.42.5(pid=15440) [trial-2400↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15440)]  [trial-2400↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪iperf3.py:8]
06:03:26.609726 tst                      iperf3.py:8: Test FAILED (7.8 sec)
06:03:26.671259 run   osmo-hlr_10.42.42.2(pid=15437): ERR: Terminated: ERROR {rc=237}  [trial-2400↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=15437)]
06:03:26.720932 run   osmo-hlr_10.42.42.2(pid=15437): stdout: 
| (launched: 2022-12-14_06:03:23.332681) 
06:03:26.771612 run   osmo-hlr_10.42.42.2(pid=15437): stderr: 
| �[0;m�[1;31m20221214060323511 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221214060323511 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221214060323511 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221214060323511 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221214060323511 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221214060323511 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221214060323523 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2400/run.2022-12-14_05-28-31/gprs:trx-sysmocell5000+mod-bts0-dynts-osmo/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221214060323531 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221214060323531 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221214060323531 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
06:03:26.814606 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=15432): Terminating (SIGTERM)
06:03:26.855168 run iperf3-srv_10.42.42.10(pid=15433): Terminating (SIGTERM)
06:03:26.895638 run pcap-recorder_any(filters='host 10.42.42.2')(pid=15436): Terminating (SIGTERM)
06:03:26.935891 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=15439): Terminating (SIGTERM)
06:03:26.976560 run pcap-recorder_any(filters='host 10.42.42.6')(pid=15442): Terminating (SIGTERM)
06:03:26.985743 ---      ParallelTerminationStrategy: PID 15432 died...
06:03:27.039703 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=15432): Terminated: ok {rc=0}
06:03:27.049284 ---      ParallelTerminationStrategy: PID 15433 died...
06:03:27.102599 run iperf3-srv_10.42.42.10(pid=15433): Terminated {rc=256}
06:03:27.112055 ---      ParallelTerminationStrategy: PID 15436 died...
06:03:27.178342 run pcap-recorder_any(filters='host 10.42.42.2')(pid=15436): Terminated: ok {rc=0}
06:03:27.187954 ---      ParallelTerminationStrategy: PID 15439 died...
06:03:27.240088 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=15439): Terminated: ok {rc=0}
06:03:27.249455 ---      ParallelTerminationStrategy: PID 15442 died...
06:03:27.301681 run pcap-recorder_any(filters='host 10.42.42.6')(pid=15442): Terminated: ok {rc=0}
06:03:27.384364 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module>
    setup_run_iperf3_test_parallel(1)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=15440): Process ended prematurely: osmo-stp_10.42.42.5(pid=15440) [trial-2400↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15440)]