Skip to content

Failed

gprs:trx-sysmocell5000+mod-bts0-dynts-osmo.iperf3.py (from gprs_trx-sysmocell5000+mod-bts0-dynts-osmo)

Failing for the past 261 builds (Since #2139 )
Took 8 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=7049): Process ended prematurely: osmo-stp_10.42.42.5(pid=7049) [trial-2399↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7049)]

Standard Output

----------------------------------------------
trial-2399 gprs:trx-sysmocell5000+mod-bts0-dynts-osmo iperf3.py
----------------------------------------------
04:09:23.946311 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
04:09:23.958728 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1)
04:09:24.126394 tst                        iperf3.py: using LAC 38445
04:09:24.248664 tst                        iperf3.py: using RAC 195
04:09:24.375126 tst                        iperf3.py: using CellId 38445
04:09:24.500232 tst                        iperf3.py: using BVCI 38446
04:09:24.525811 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
04:09:24.537450 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
04:09:24.549181 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
04:09:24.560809 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
04:09:24.572907 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
04:09:24.585575 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
04:09:24.597939 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
04:09:24.609921 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
04:09:24.622478 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4)
04:09:24.914861 tst                      iperf3.py:8: start iperfv3 server 10.42.42.10:5003...
04:09:25.047448 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
04:09:25.381806 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7041): Launched
04:09:25.663208 run iperf3-srv_10.42.42.10(pid=7042): Launched
04:09:25.862078 tst                      iperf3.py:8: start network...
04:09:25.997725 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
04:09:26.510365 run          create_hlr_db(pid=7043): Launched
04:09:26.698318 bus                          /gobi_6: Setting Powered False
04:09:27.707700 run          create_hlr_db(pid=7043): Terminated: ok {rc=0}
04:09:28.148931 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7045): Launched
04:09:28.476692 run    osmo-hlr_10.42.42.2(pid=7046): Launched
04:09:28.590749 run              osmo-stp_10.42.42.5: Starting osmo-stp
04:09:29.116455 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7048): Launched
04:09:29.419779 run    osmo-stp_10.42.42.5(pid=7049): Launched
04:09:29.530044 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
04:09:30.057989 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7051): Launched
04:09:30.165838 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
04:09:30.430730 run               patchelf(pid=7052): Launched
04:09:30.608876 run    osmo-stp_10.42.42.5(pid=7049): ERR: Terminated: ERROR {rc=1}  [trial-2399↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7049)]
04:09:30.738503 run    osmo-stp_10.42.42.5(pid=7049): stdout: 
| (launched: 2022-12-14_04:09:29.270368)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
04:09:30.881543 run    osmo-stp_10.42.42.5(pid=7049): stderr: 
| �[0;m�[38;5;43m20221214040929440 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221214040929440 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221214040929441 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221214040929441 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221214040929442 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221214040929442 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221214040929442 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
04:09:31.023547 run    osmo-stp_10.42.42.5(pid=7049): stdout: 
| (launched: 2022-12-14_04:09:29.270368)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
04:09:31.163238 run    osmo-stp_10.42.42.5(pid=7049): stderr: 
| �[0;m�[38;5;43m20221214040929440 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221214040929440 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221214040929441 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221214040929441 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221214040929442 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221214040929442 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221214040929442 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
04:09:31.323377 run               patchelf(pid=7052): Terminating (SIGINT)
04:09:31.510617 run               patchelf(pid=7052): Terminated: ok {rc=0}
04:09:31.546066 tst                      iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=7049): Process ended prematurely: osmo-stp_10.42.42.5(pid=7049) [trial-2399↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7049)]  [trial-2399↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪iperf3.py:8]
04:09:31.557359 tst                      iperf3.py:8: Test FAILED (7.6 sec)
04:09:31.625144 run    osmo-hlr_10.42.42.2(pid=7046): ERR: Terminated: ERROR {rc=237}  [trial-2399↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=7046)]
04:09:31.682344 run    osmo-hlr_10.42.42.2(pid=7046): stdout: 
| (launched: 2022-12-14_04:09:28.314395) 
04:09:31.737915 run    osmo-hlr_10.42.42.2(pid=7046): stderr: 
| �[0;m�[1;31m20221214040928512 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221214040928512 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221214040928513 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221214040928513 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221214040928513 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221214040928513 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221214040928529 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2399/run.2022-12-14_03-34-50/gprs:trx-sysmocell5000+mod-bts0-dynts-osmo/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221214040928537 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221214040928537 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221214040928537 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
04:09:31.786415 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7041): Terminating (SIGTERM)
04:09:31.831007 run iperf3-srv_10.42.42.10(pid=7042): Terminating (SIGTERM)
04:09:31.878294 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7045): Terminating (SIGTERM)
04:09:31.925419 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7048): Terminating (SIGTERM)
04:09:31.971954 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7051): Terminating (SIGTERM)
04:09:31.983013 ---      ParallelTerminationStrategy: PID 7041 died...
04:09:32.044578 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7041): Terminated: ok {rc=0}
04:09:32.056518 ---      ParallelTerminationStrategy: PID 7042 died...
04:09:32.116329 run iperf3-srv_10.42.42.10(pid=7042): Terminated {rc=256}
04:09:32.128089 ---      ParallelTerminationStrategy: PID 7045 died...
04:09:32.187860 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7045): Terminated: ok {rc=0}
04:09:32.198833 ---      ParallelTerminationStrategy: PID 7048 died...
04:09:32.256357 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7048): Terminated: ok {rc=0}
04:09:32.266711 ---      ParallelTerminationStrategy: PID 7051 died...
04:09:32.324523 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7051): Terminated: ok {rc=0}
04:09:32.412839 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module>
    setup_run_iperf3_test_parallel(1)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=7049): Process ended prematurely: osmo-stp_10.42.42.5(pid=7049) [trial-2399↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7049)]