Skip to content

Failed

gprs:sysmo+mod-bts0-egprs.ping.py (from gprs_sysmo+mod-bts0-egprs)

Failing for the past 73 builds (Since #2331 )
Took 8 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=4276): Process ended prematurely: osmo-stp_10.42.42.5(pid=4276) [trial-2403↪gprs:sysmo+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4276)]

Standard Output

----------------------------------------------
trial-2403 gprs:sysmo+mod-bts0-egprs ping.py
----------------------------------------------
10:00:12.524939 tst        gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
10:00:12.536832 tst        gprs:sysmo+mod-bts0-egprs: Using 1 x bts (candidates: 1)
10:00:12.666077 tst                          ping.py: using LAC 40146
10:00:12.788191 tst                          ping.py: using RAC 111
10:00:12.908532 tst                          ping.py: using CellId 40146
10:00:13.029447 tst                          ping.py: using BVCI 40147
10:00:13.052439 tst        gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
10:00:13.063255 tst        gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
10:00:13.074009 tst        gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
10:00:13.084588 tst        gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
10:00:13.096056 tst        gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
10:00:13.107637 tst        gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
10:00:13.119185 tst        gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
10:00:13.130701 tst        gprs:sysmo+mod-bts0-egprs: Using 1 x modem (candidates: 4)
10:00:13.431057 tst                       ping.py:19: start network...
10:00:13.567177 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
10:00:14.088263 run          create_hlr_db(pid=4270): Launched
10:00:14.277463 bus                          /gobi_6: Setting Powered False
10:00:15.298116 run          create_hlr_db(pid=4270): Terminated: ok {rc=0}
10:00:15.734235 run pcap-recorder_any(filters='host 10.42.42.2')(pid=4272): Launched
10:00:16.175383 run    osmo-hlr_10.42.42.2(pid=4273): Launched
10:00:16.424348 run              osmo-stp_10.42.42.5: Starting osmo-stp
10:00:17.009076 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=4275): Launched
10:00:17.336680 run    osmo-stp_10.42.42.5(pid=4276): Launched
10:00:17.459439 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
10:00:18.025232 run pcap-recorder_any(filters='host 10.42.42.6')(pid=4278): Launched
10:00:18.140882 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
10:00:18.426584 run               patchelf(pid=4279): Launched
10:00:18.616718 run    osmo-stp_10.42.42.5(pid=4276): ERR: Terminated: ERROR {rc=1}  [trial-2403↪gprs:sysmo+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4276)]
10:00:18.755234 run    osmo-stp_10.42.42.5(pid=4276): stdout: 
| (launched: 2022-12-14_10:00:17.175956)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
10:00:18.895103 run    osmo-stp_10.42.42.5(pid=4276): stderr: 
| �[0;m�[38;5;43m20221214100017371 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221214100017371 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221214100017371 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221214100017372 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221214100017372 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221214100017372 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221214100017372 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
10:00:19.029417 run    osmo-stp_10.42.42.5(pid=4276): stdout: 
| (launched: 2022-12-14_10:00:17.175956)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
10:00:19.162359 run    osmo-stp_10.42.42.5(pid=4276): stderr: 
| �[0;m�[38;5;43m20221214100017371 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221214100017371 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221214100017371 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221214100017372 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221214100017372 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221214100017372 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221214100017372 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
10:00:19.317532 run               patchelf(pid=4279): Terminating (SIGINT)
10:00:19.499627 run               patchelf(pid=4279): Terminated: ok {rc=0}
10:00:19.533232 tst                       ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=4276): Process ended prematurely: osmo-stp_10.42.42.5(pid=4276) [trial-2403↪gprs:sysmo+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4276)]  [trial-2403↪gprs:sysmo+mod-bts0-egprs↪ping.py:22]
10:00:19.542826 tst                       ping.py:22: Test FAILED (7.0 sec)
10:00:19.607092 run    osmo-hlr_10.42.42.2(pid=4273): ERR: Terminated: ERROR {rc=237}  [trial-2403↪gprs:sysmo+mod-bts0-egprs↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=4273)]
10:00:19.659024 run    osmo-hlr_10.42.42.2(pid=4273): stdout: 
| (launched: 2022-12-14_10:00:15.916759) 
10:00:19.711954 run    osmo-hlr_10.42.42.2(pid=4273): stderr: 
| �[0;m�[1;31m20221214100016223 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221214100016223 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221214100016224 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221214100016224 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221214100016224 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221214100016224 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221214100016247 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2403/run.2022-12-14_09-52-37/gprs:sysmo+mod-bts0-egprs/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221214100016263 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221214100016263 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221214100016263 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
10:00:19.756996 run pcap-recorder_any(filters='host 10.42.42.2')(pid=4272): Terminating (SIGTERM)
10:00:19.799667 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=4275): Terminating (SIGTERM)
10:00:19.842180 run pcap-recorder_any(filters='host 10.42.42.6')(pid=4278): Terminating (SIGTERM)
10:00:19.851949 ---      ParallelTerminationStrategy: PID 4272 died...
10:00:19.908541 run pcap-recorder_any(filters='host 10.42.42.2')(pid=4272): Terminated: ok {rc=0}
10:00:19.918848 ---      ParallelTerminationStrategy: PID 4275 died...
10:00:19.974854 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=4275): Terminated: ok {rc=0}
10:00:19.985091 ---      ParallelTerminationStrategy: PID 4278 died...
10:00:20.042795 run pcap-recorder_any(filters='host 10.42.42.6')(pid=4278): Terminated: ok {rc=0}
10:00:20.130885 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module>
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=4276): Process ended prematurely: osmo-stp_10.42.42.5(pid=4276) [trial-2403↪gprs:sysmo+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4276)]