Skip to content

Failed

gprs:sysmo+mod-bts0-egprs.ping.py (from gprs_sysmo+mod-bts0-egprs)

Failing for the past 74 builds (Since #2331 )
Took 7 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=16643): Process ended prematurely: osmo-stp_10.42.42.5(pid=16643) [trial-2404↪gprs:sysmo+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16643)]

Standard Output

----------------------------------------------
trial-2404 gprs:sysmo+mod-bts0-egprs ping.py
----------------------------------------------
11:33:19.826098 tst        gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
11:33:19.837564 tst        gprs:sysmo+mod-bts0-egprs: Using 1 x bts (candidates: 1)
11:33:19.968566 tst                          ping.py: using LAC 40607
11:33:20.090068 tst                          ping.py: using RAC 62
11:33:20.221986 tst                          ping.py: using CellId 40607
11:33:20.352336 tst                          ping.py: using BVCI 40608
11:33:20.377155 tst        gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
11:33:20.388469 tst        gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
11:33:20.399684 tst        gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
11:33:20.410796 tst        gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
11:33:20.422320 tst        gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
11:33:20.433857 tst        gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
11:33:20.445763 tst        gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
11:33:20.457444 tst        gprs:sysmo+mod-bts0-egprs: Using 1 x modem (candidates: 4)
11:33:20.738052 tst                       ping.py:19: start network...
11:33:20.862641 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
11:33:21.337056 run         create_hlr_db(pid=16637): Launched
11:33:21.510992 bus                          /gobi_6: Setting Powered False
11:33:22.531706 run         create_hlr_db(pid=16637): Terminated: ok {rc=0}
11:33:22.933204 run pcap-recorder_any(filters='host 10.42.42.2')(pid=16639): Launched
11:33:23.233111 run   osmo-hlr_10.42.42.2(pid=16640): Launched
11:33:23.346739 run              osmo-stp_10.42.42.5: Starting osmo-stp
11:33:23.867369 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=16642): Launched
11:33:24.167654 run   osmo-stp_10.42.42.5(pid=16643): Launched
11:33:24.276450 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
11:33:24.798403 run pcap-recorder_any(filters='host 10.42.42.6')(pid=16645): Launched
11:33:24.904718 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
11:33:25.168541 run              patchelf(pid=16646): Launched
11:33:25.345377 run   osmo-stp_10.42.42.5(pid=16643): ERR: Terminated: ERROR {rc=1}  [trial-2404↪gprs:sysmo+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16643)]
11:33:25.474459 run   osmo-stp_10.42.42.5(pid=16643): stdout: 
| (launched: 2022-12-14_11:33:24.019419)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
11:33:25.603792 run   osmo-stp_10.42.42.5(pid=16643): stderr: 
| �[0;m�[38;5;43m20221214113324187 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221214113324187 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221214113324188 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221214113324188 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221214113324189 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221214113324189 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221214113324189 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
11:33:25.728248 run   osmo-stp_10.42.42.5(pid=16643): stdout: 
| (launched: 2022-12-14_11:33:24.019419)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
11:33:25.851367 run   osmo-stp_10.42.42.5(pid=16643): stderr: 
| �[0;m�[38;5;43m20221214113324187 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221214113324187 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221214113324188 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221214113324188 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221214113324189 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221214113324189 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221214113324189 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
11:33:25.994872 run              patchelf(pid=16646): Terminating (SIGINT)
11:33:26.162989 run              patchelf(pid=16646): Terminated: ok {rc=0}
11:33:26.193456 tst                       ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=16643): Process ended prematurely: osmo-stp_10.42.42.5(pid=16643) [trial-2404↪gprs:sysmo+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16643)]  [trial-2404↪gprs:sysmo+mod-bts0-egprs↪ping.py:22]
11:33:26.202676 tst                       ping.py:22: Test FAILED (6.4 sec)
11:33:26.263891 run   osmo-hlr_10.42.42.2(pid=16640): ERR: Terminated: ERROR {rc=237}  [trial-2404↪gprs:sysmo+mod-bts0-egprs↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=16640)]
11:33:26.313858 run   osmo-hlr_10.42.42.2(pid=16640): stdout: 
| (launched: 2022-12-14_11:33:23.084863) 
11:33:26.364207 run   osmo-hlr_10.42.42.2(pid=16640): stderr: 
| �[0;m�[1;31m20221214113323255 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221214113323255 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221214113323255 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221214113323255 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221214113323255 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221214113323255 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221214113323266 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2404/run.2022-12-14_11-25-45/gprs:sysmo+mod-bts0-egprs/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221214113323274 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221214113323274 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221214113323274 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
11:33:26.407387 run pcap-recorder_any(filters='host 10.42.42.2')(pid=16639): Terminating (SIGTERM)
11:33:26.448649 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=16642): Terminating (SIGTERM)
11:33:26.490003 run pcap-recorder_any(filters='host 10.42.42.6')(pid=16645): Terminating (SIGTERM)
11:33:26.499333 ---      ParallelTerminationStrategy: PID 16639 died...
11:33:26.553910 run pcap-recorder_any(filters='host 10.42.42.2')(pid=16639): Terminated: ok {rc=0}
11:33:26.563665 ---      ParallelTerminationStrategy: PID 16642 died...
11:33:26.618047 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=16642): Terminated: ok {rc=0}
11:33:26.627656 ---      ParallelTerminationStrategy: PID 16645 died...
11:33:26.681847 run pcap-recorder_any(filters='host 10.42.42.6')(pid=16645): Terminated: ok {rc=0}
11:33:26.767313 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module>
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=16643): Process ended prematurely: osmo-stp_10.42.42.5(pid=16643) [trial-2404↪gprs:sysmo+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16643)]