Skip to content

Failed

gprs:nanobts+band-900+mod-bts0-dynts-ipa.iperf3.py (from gprs_nanobts+band-900+mod-bts0-dynts-ipa)

Failing for the past 266 builds (Since #2139 )
Took 8 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=22790): Process ended prematurely: osmo-stp_10.42.42.5(pid=22790) [trial-2404↪gprs:nanobts+band-900+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22790)]

Standard Output

----------------------------------------------
trial-2404 gprs:nanobts+band-900+mod-bts0-dynts-ipa iperf3.py
----------------------------------------------
12:37:49.107235 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
12:37:49.118849 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1)
12:37:49.274393 tst                        iperf3.py: using LAC 40949
12:37:49.391752 tst                        iperf3.py: using RAC 149
12:37:49.511439 tst                        iperf3.py: using CellId 40949
12:37:49.632675 tst                        iperf3.py: using BVCI 40950
12:37:49.655837 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
12:37:49.666843 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
12:37:49.677728 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
12:37:49.688355 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
12:37:49.699398 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
12:37:49.710425 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
12:37:49.721660 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
12:37:49.732493 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
12:37:49.743611 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4)
12:37:50.021248 tst                      iperf3.py:8: start iperfv3 server 10.42.42.10:5003...
12:37:50.147609 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
12:37:50.463477 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22782): Launched
12:37:50.726767 run iperf3-srv_10.42.42.10(pid=22783): Launched
12:37:50.911415 tst                      iperf3.py:8: start network...
12:37:51.037585 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
12:37:51.514844 run         create_hlr_db(pid=22784): Launched
12:37:51.689295 bus                          /gobi_6: Setting Powered False
12:37:52.711659 run         create_hlr_db(pid=22784): Terminated: ok {rc=0}
12:37:53.145683 run pcap-recorder_any(filters='host 10.42.42.2')(pid=22786): Launched
12:37:53.474188 run   osmo-hlr_10.42.42.2(pid=22787): Launched
12:37:53.597531 run              osmo-stp_10.42.42.5: Starting osmo-stp
12:37:54.163685 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=22789): Launched
12:37:54.489083 run   osmo-stp_10.42.42.5(pid=22790): Launched
12:37:54.608244 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
12:37:55.175334 run pcap-recorder_any(filters='host 10.42.42.6')(pid=22792): Launched
12:37:55.290952 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
12:37:55.575022 run              patchelf(pid=22793): Launched
12:37:55.764667 run   osmo-stp_10.42.42.5(pid=22790): ERR: Terminated: ERROR {rc=1}  [trial-2404↪gprs:nanobts+band-900+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22790)]
12:37:55.903215 run   osmo-stp_10.42.42.5(pid=22790): stdout: 
| (launched: 2022-12-14_12:37:54.328613)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
12:37:56.041984 run   osmo-stp_10.42.42.5(pid=22790): stderr: 
| �[0;m�[38;5;43m20221214123754523 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221214123754524 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221214123754524 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221214123754524 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221214123754525 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221214123754525 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221214123754525 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
12:37:56.176100 run   osmo-stp_10.42.42.5(pid=22790): stdout: 
| (launched: 2022-12-14_12:37:54.328613)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
12:37:56.308719 run   osmo-stp_10.42.42.5(pid=22790): stderr: 
| �[0;m�[38;5;43m20221214123754523 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221214123754524 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221214123754524 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221214123754524 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221214123754525 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221214123754525 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221214123754525 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
12:37:56.463701 run              patchelf(pid=22793): Terminating (SIGINT)
12:37:56.646893 run              patchelf(pid=22793): Terminated: ok {rc=0}
12:37:56.680443 tst                      iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=22790): Process ended prematurely: osmo-stp_10.42.42.5(pid=22790) [trial-2404↪gprs:nanobts+band-900+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22790)]  [trial-2404↪gprs:nanobts+band-900+mod-bts0-dynts-ipa↪iperf3.py:8]
12:37:56.690358 tst                      iperf3.py:8: Test FAILED (7.6 sec)
12:37:56.753023 run   osmo-hlr_10.42.42.2(pid=22787): ERR: Terminated: ERROR {rc=237}  [trial-2404↪gprs:nanobts+band-900+mod-bts0-dynts-ipa↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=22787)]
12:37:56.803923 run   osmo-hlr_10.42.42.2(pid=22787): stdout: 
| (launched: 2022-12-14_12:37:53.311590) 
12:37:56.855727 run   osmo-hlr_10.42.42.2(pid=22787): stderr: 
| �[0;m�[1;31m20221214123753512 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221214123753513 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221214123753514 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221214123753514 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221214123753514 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221214123753514 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221214123753529 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2404/run.2022-12-14_11-25-45/gprs:nanobts+band-900+mod-bts0-dynts-ipa/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221214123753537 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221214123753537 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221214123753537 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
12:37:56.899941 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22782): Terminating (SIGTERM)
12:37:56.942032 run iperf3-srv_10.42.42.10(pid=22783): Terminating (SIGTERM)
12:37:56.983526 run pcap-recorder_any(filters='host 10.42.42.2')(pid=22786): Terminating (SIGTERM)
12:37:57.025161 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=22789): Terminating (SIGTERM)
12:37:57.066953 run pcap-recorder_any(filters='host 10.42.42.6')(pid=22792): Terminating (SIGTERM)
12:37:57.076708 ---      ParallelTerminationStrategy: PID 22782 died...
12:37:57.133093 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22782): Terminated: ok {rc=0}
12:37:57.143174 ---      ParallelTerminationStrategy: PID 22783 died...
12:37:57.198558 run iperf3-srv_10.42.42.10(pid=22783): Terminated {rc=256}
12:37:57.208555 ---      ParallelTerminationStrategy: PID 22786 died...
12:37:57.263923 run pcap-recorder_any(filters='host 10.42.42.2')(pid=22786): Terminated: ok {rc=0}
12:37:57.274040 ---      ParallelTerminationStrategy: PID 22789 died...
12:37:57.329212 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=22789): Terminated: ok {rc=0}
12:37:57.339199 ---      ParallelTerminationStrategy: PID 22792 died...
12:37:57.394484 run pcap-recorder_any(filters='host 10.42.42.6')(pid=22792): Terminated: ok {rc=0}
12:37:57.480367 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module>
    setup_run_iperf3_test_parallel(1)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=22790): Process ended prematurely: osmo-stp_10.42.42.5(pid=22790) [trial-2404↪gprs:nanobts+band-900+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22790)]