Skip to content

Failed

gprs:nanobts+band-900+mod-bts0-dynts-ipa.iperf3.py (from gprs_nanobts+band-900+mod-bts0-dynts-ipa)

Failing for the past 267 builds (Since #2139 )
Took 8 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=30804): Process ended prematurely: osmo-stp_10.42.42.5(pid=30804) [trial-2405↪gprs:nanobts+band-900+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30804)]

Standard Output

----------------------------------------------
trial-2405 gprs:nanobts+band-900+mod-bts0-dynts-ipa iperf3.py
----------------------------------------------
14:05:00.744666 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
14:05:00.756254 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1)
14:05:00.939411 tst                        iperf3.py: using LAC 41410
14:05:01.110085 tst                        iperf3.py: using RAC 100
14:05:01.246420 tst                        iperf3.py: using CellId 41410
14:05:01.375413 tst                        iperf3.py: using BVCI 41411
14:05:01.401791 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
14:05:01.414224 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
14:05:01.426548 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
14:05:01.438883 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
14:05:01.452325 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
14:05:01.465737 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
14:05:01.480894 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
14:05:01.494196 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
14:05:01.507296 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4)
14:05:01.813475 tst                      iperf3.py:8: start iperfv3 server 10.42.42.10:5003...
14:05:01.955660 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
14:05:02.314841 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30796): Launched
14:05:02.597682 run iperf3-srv_10.42.42.10(pid=30797): Launched
14:05:02.798458 tst                      iperf3.py:8: start network...
14:05:02.935438 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
14:05:03.448374 run         create_hlr_db(pid=30798): Launched
14:05:03.637210 bus                          /gobi_6: Setting Powered False
14:05:04.658710 run         create_hlr_db(pid=30798): Terminated: ok {rc=0}
14:05:05.067784 run pcap-recorder_any(filters='host 10.42.42.2')(pid=30800): Launched
14:05:05.373218 run   osmo-hlr_10.42.42.2(pid=30801): Launched
14:05:05.485235 run              osmo-stp_10.42.42.5: Starting osmo-stp
14:05:06.012600 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=30803): Launched
14:05:06.317930 run   osmo-stp_10.42.42.5(pid=30804): Launched
14:05:06.428239 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
14:05:06.957306 run pcap-recorder_any(filters='host 10.42.42.6')(pid=30806): Launched
14:05:07.065148 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
14:05:07.330121 run              patchelf(pid=30807): Launched
14:05:07.507320 run   osmo-stp_10.42.42.5(pid=30804): ERR: Terminated: ERROR {rc=1}  [trial-2405↪gprs:nanobts+band-900+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30804)]
14:05:07.637089 run   osmo-stp_10.42.42.5(pid=30804): stdout: 
| (launched: 2022-12-14_14:05:06.168034)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
14:05:07.767864 run   osmo-stp_10.42.42.5(pid=30804): stderr: 
| �[0;m�[38;5;43m20221214140506339 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221214140506339 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221214140506340 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221214140506340 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221214140506341 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221214140506341 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221214140506341 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
14:05:07.893459 run   osmo-stp_10.42.42.5(pid=30804): stdout: 
| (launched: 2022-12-14_14:05:06.168034)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
14:05:08.017503 run   osmo-stp_10.42.42.5(pid=30804): stderr: 
| �[0;m�[38;5;43m20221214140506339 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221214140506339 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221214140506340 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221214140506340 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221214140506341 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221214140506341 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221214140506341 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
14:05:08.163058 run              patchelf(pid=30807): Terminating (SIGINT)
14:05:08.333641 run              patchelf(pid=30807): Terminated: ok {rc=0}
14:05:08.364841 tst                      iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=30804): Process ended prematurely: osmo-stp_10.42.42.5(pid=30804) [trial-2405↪gprs:nanobts+band-900+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30804)]  [trial-2405↪gprs:nanobts+band-900+mod-bts0-dynts-ipa↪iperf3.py:8]
14:05:08.373922 tst                      iperf3.py:8: Test FAILED (7.7 sec)
14:05:08.433449 run   osmo-hlr_10.42.42.2(pid=30801): ERR: Terminated: ERROR {rc=237}  [trial-2405↪gprs:nanobts+band-900+mod-bts0-dynts-ipa↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=30801)]
14:05:08.482549 run   osmo-hlr_10.42.42.2(pid=30801): stdout: 
| (launched: 2022-12-14_14:05:05.223096) 
14:05:08.531883 run   osmo-hlr_10.42.42.2(pid=30801): stderr: 
| �[0;m�[1;31m20221214140505400 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221214140505400 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221214140505401 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221214140505401 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221214140505401 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221214140505401 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221214140505413 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2405/run.2022-12-14_12-53-19/gprs:nanobts+band-900+mod-bts0-dynts-ipa/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221214140505421 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221214140505422 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221214140505422 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
14:05:08.573531 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30796): Terminating (SIGTERM)
14:05:08.612661 run iperf3-srv_10.42.42.10(pid=30797): Terminating (SIGTERM)
14:05:08.651777 run pcap-recorder_any(filters='host 10.42.42.2')(pid=30800): Terminating (SIGTERM)
14:05:08.690970 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=30803): Terminating (SIGTERM)
14:05:08.730186 run pcap-recorder_any(filters='host 10.42.42.6')(pid=30806): Terminating (SIGTERM)
14:05:08.739389 ---      ParallelTerminationStrategy: PID 30796 died...
14:05:08.792190 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30796): Terminated: ok {rc=0}
14:05:08.801912 ---      ParallelTerminationStrategy: PID 30797 died...
14:05:08.854223 run iperf3-srv_10.42.42.10(pid=30797): Terminated {rc=256}
14:05:08.863695 ---      ParallelTerminationStrategy: PID 30800 died...
14:05:08.916172 run pcap-recorder_any(filters='host 10.42.42.2')(pid=30800): Terminated: ok {rc=0}
14:05:08.925845 ---      ParallelTerminationStrategy: PID 30803 died...
14:05:08.978422 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=30803): Terminated: ok {rc=0}
14:05:08.988068 ---      ParallelTerminationStrategy: PID 30806 died...
14:05:09.040636 run pcap-recorder_any(filters='host 10.42.42.6')(pid=30806): Terminated: ok {rc=0}
14:05:09.123893 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module>
    setup_run_iperf3_test_parallel(1)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=30804): Process ended prematurely: osmo-stp_10.42.42.5(pid=30804) [trial-2405↪gprs:nanobts+band-900+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30804)]