0%
WDescription%
Test Result: 3 tests failing out of a total of 3 tests.0
Build stability: 1 out of the last 5 builds failed.80
Build History
x
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Changes

#2746 (Nov 11, 2020 11:19:00 PM)

  1. enb: Support cells from different ENBs in ncell_list — pespin / detail
  2. sysmocom: Introduce suite 4g2enb — pespin / detail
  3. resource: Support waiting for reserved resources until available — pespin / detail
  4. iperf3_{dl,ul}: adapt pass/fail threshold — andre / detail
  5. {enb,ms}_srs: Add DL QAM-256 support — andre / detail
  6. epc_srs.py: Fixed reference in local execution — andre / detail
  7. enb-cells_2ca: add missing cell params — andre / detail
  8. schema: allow empty lists in resource schema — andre / detail

#2744 (Nov 9, 2020 11:19:00 PM)

  1. srsenb_rr.conf: add PCI, TAC and root_seq_idx as cell param — pespin / detail

#2729 (Oct 26, 2020 5:41:19 PM)

  1. enb: Fix non-1st ENB gnubreaker remote address — pespin / detail

#2728 (Oct 25, 2020 1:50:10 AM)

  1. Copy gnuradio zmq broker at runtime — pespin / detail
  2. enb: Name preferrably by label, use it in remote run dir — pespin / detail

#2725 (Oct 22, 2020 1:01:46 PM)

  1. sysmocom: emergency_preemptive_call.py: Avoid test failure if 2nd call not fully established — pespin / detail

#2723 (Oct 19, 2020 11:19:00 PM)

  1. gnuradio zmq broker refactoring — pespin / detail

#2720 (Oct 17, 2020 2:16:40 AM)

  1. enb: add basic TDD config option — pespin / detail
  2. mod-enb-cell-2ca: fix EARFCN — pespin / detail
  3. rfemu_gnuradio_zmq: fix amplitude conversion — pespin / detail
  4. mod-gr-broker: add scenario to easily enable the GR broker — pespin / detail
  5. intra-freq-ho{-sameport}.conf: add scenarios for intra-freq HO cells — pespin / detail

#2719 (Oct 15, 2020 11:19:00 PM)

  1. enb/ue: Assign zmq binding ports dynamically at runtime — pespin / detail
  2. ms: Fix and use ms msisdn() getter — pespin / detail
  3. 4g: Introduce ZMQ GnuRadio stream broker — pespin / detail
  4. ms: Allocate default msisdn internally — pespin / detail
  5. sysmocom: Introduce suite to test emergency calls — pespin / detail
  6. sysmocom: Enable emergency call testing in default-suites.conf — pespin / detail
  7. sysmocom: Introduce test to verify emergency call preemption — pespin / detail

#2718 (Oct 14, 2020 11:19:00 PM)

  1. templates/osmo-bts-trx: Increase osmo-trx rx-gain — pespin / detail
  2. scenarios: Introduce mod-enb-cells-2ca.conf — pespin / detail
  3. enb-cells-2ca: fix config to match cell-id and cc idx — andre / detail

#2717 (Oct 13, 2020 11:19:00 PM)

  1. enb_amarisoft: temporary reduce max UL rate on 2nd CC — andre / detail
  2. srsenb_rr.conf.example: comment CQI and SR specific subframes — andre / detail
  3. reduce max expected UL rate for 4xCA 100 PRB — andre / detail
  4. {enb,epc,ms}_srs: refactor start/stop and KPI helpers — andre / detail
  5. srsenb_rr.conf.tmpl: set TAC for cells to 0x0007 — andre / detail
  6. ms_srs: fix ZMQ config for 4xCA — andre / detail
  7. amarisoft_sib23.asn.tmpl: set p-b value in SIB23 depending on TM — andre / detail
  8. amarisoft_enb.cfg.tmpl: use default tac 0007 — andre / detail
  9. lte: update UHD device args for MIMO usage — andre / detail
  10. amarisoft_enb.cfg.tmpl: increas threshold for failed UL retransmissions — andre / detail
  11. enb_amarisoft: reduce max achievable UL rate for 100 PRB — andre / detail
  12. amarisoft_enb.cfg.tmpl: seperate PRACH root sequences for cells — andre / detail
  13. srslte_common: add get_num_phy_errors() method — andre / detail
  14. srslte_common: fix indent in whole file — andre / detail
  15. ms_srs: add freq_offset as resource param — andre / detail
  16. jenkins-build-amarisoft: fix build script for ZMQ module — andre / detail
  17. enb_amarisoft: add rf_dev_sync option to specify the sync type — andre / detail
  18. srs{enb,ue}: add rf_dev_sync option to config templates — andre / detail
  19. Introduce RFemu stdin implementation for srsENB — andre / detail
  20. srsenb: Fix ECI in handover cell list — andre / detail
  21. srsenb: Activate handover in config file — andre / detail
  22. {enb,epc,ms}_srs: remove uneeded class variable — andre / detail
  23. rfemu_srsenb_stdin: use negative dB value to set attenuation — andre / detail