Skip to content
[Jenkins]Jenkins
log in | sign up

Failed

gprs:trx-sysmocell5000+mod-bts0-dynts-osmo.iperf3.py (from gprs_trx-sysmocell5000+mod-bts0-dynts-osmo)

Failing for the past 260 builds (Since #2139 )
Took 8 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=30876): Process ended prematurely: osmo-stp_10.42.42.5(pid=30876) [trial-2398↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30876)]

Standard Output

----------------------------------------------
trial-2398 gprs:trx-sysmocell5000+mod-bts0-dynts-osmo iperf3.py
----------------------------------------------
02:41:56.916604 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
02:41:56.928028 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1)
02:41:57.088265 tst                        iperf3.py: using LAC 37984
02:41:57.208508 tst                        iperf3.py: using RAC 244
02:41:57.332706 tst                        iperf3.py: using CellId 37984
02:41:57.462332 tst                        iperf3.py: using BVCI 37985
02:41:57.487523 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
02:41:57.499087 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
02:41:57.510929 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
02:41:57.522761 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
02:41:57.534841 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
02:41:57.546497 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
02:41:57.558574 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
02:41:57.570036 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
02:41:57.581873 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4)
02:41:57.860008 tst                      iperf3.py:8: start iperfv3 server 10.42.42.10:5003...
02:41:57.985797 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
02:41:58.299241 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30866): Launched
02:41:58.561097 run iperf3-srv_10.42.42.10(pid=30867): Launched
02:41:58.745286 tst                      iperf3.py:8: start network...
02:41:58.872464 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
02:41:59.359652 run         create_hlr_db(pid=30868): Launched
02:41:59.533387 bus                          /gobi_6: Setting Powered False
02:42:00.555531 run         create_hlr_db(pid=30868): Terminated: ok {rc=0}
02:42:01.076369 run pcap-recorder_any(filters='host 10.42.42.2')(pid=30871): Launched
02:42:01.621792 run   osmo-hlr_10.42.42.2(pid=30873): Launched
02:42:01.818962 run              osmo-stp_10.42.42.5: Starting osmo-stp
02:42:02.433838 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=30875): Launched
02:42:02.740397 run   osmo-stp_10.42.42.5(pid=30876): Launched
02:42:02.850823 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
02:42:03.374107 run pcap-recorder_any(filters='host 10.42.42.6')(pid=30878): Launched
02:42:03.480592 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
02:42:03.741774 run              patchelf(pid=30879): Launched
02:42:03.916866 run   osmo-stp_10.42.42.5(pid=30876): ERR: Terminated: ERROR {rc=1}  [trial-2398↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30876)]
02:42:04.046574 run   osmo-stp_10.42.42.5(pid=30876): stdout: 
| (launched: 2022-12-14_02:42:02.588107)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
02:42:04.174944 run   osmo-stp_10.42.42.5(pid=30876): stderr: 
| �[0;m�[38;5;43m20221214024202764 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221214024202764 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221214024202764 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221214024202765 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221214024202765 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221214024202765 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221214024202766 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
02:42:04.298976 run   osmo-stp_10.42.42.5(pid=30876): stdout: 
| (launched: 2022-12-14_02:42:02.588107)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
02:42:04.421929 run   osmo-stp_10.42.42.5(pid=30876): stderr: 
| �[0;m�[38;5;43m20221214024202764 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221214024202764 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221214024202764 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221214024202765 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221214024202765 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221214024202765 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221214024202766 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
02:42:04.565702 run              patchelf(pid=30879): Terminating (SIGINT)
02:42:04.735116 run              patchelf(pid=30879): Terminated: ok {rc=0}
02:42:04.766257 tst                      iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=30876): Process ended prematurely: osmo-stp_10.42.42.5(pid=30876) [trial-2398↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30876)]  [trial-2398↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪iperf3.py:8]
02:42:04.775541 tst                      iperf3.py:8: Test FAILED (7.9 sec)
02:42:04.835240 run   osmo-hlr_10.42.42.2(pid=30873): ERR: Terminated: ERROR {rc=237}  [trial-2398↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=30873)]
02:42:04.884640 run   osmo-hlr_10.42.42.2(pid=30873): stdout: 
| (launched: 2022-12-14_02:42:01.294044) 
02:42:04.933906 run   osmo-hlr_10.42.42.2(pid=30873): stderr: 
| �[0;m�[1;31m20221214024201540 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221214024201540 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221214024201540 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221214024201540 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221214024201540 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221214024201540 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221214024201556 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2398/run.2022-12-14_02-07-46/gprs:trx-sysmocell5000+mod-bts0-dynts-osmo/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221214024201570 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221214024201570 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221214024201570 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
02:42:04.975880 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30866): Terminating (SIGTERM)
02:42:05.015278 run iperf3-srv_10.42.42.10(pid=30867): Terminating (SIGTERM)
02:42:05.054860 run pcap-recorder_any(filters='host 10.42.42.2')(pid=30871): Terminating (SIGTERM)
02:42:05.094325 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=30875): Terminating (SIGTERM)
02:42:05.133983 run pcap-recorder_any(filters='host 10.42.42.6')(pid=30878): Terminating (SIGTERM)
02:42:05.143144 ---      ParallelTerminationStrategy: PID 30866 died...
02:42:05.195944 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30866): Terminated: ok {rc=0}
02:42:05.205420 ---      ParallelTerminationStrategy: PID 30867 died...
02:42:05.257427 run iperf3-srv_10.42.42.10(pid=30867): Terminated {rc=256}
02:42:05.266808 ---      ParallelTerminationStrategy: PID 30871 died...
02:42:05.319124 run pcap-recorder_any(filters='host 10.42.42.2')(pid=30871): Terminated: ok {rc=0}
02:42:05.328668 ---      ParallelTerminationStrategy: PID 30875 died...
02:42:05.381096 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=30875): Terminated: ok {rc=0}
02:42:05.390543 ---      ParallelTerminationStrategy: PID 30878 died...
02:42:05.443026 run pcap-recorder_any(filters='host 10.42.42.6')(pid=30878): Terminated: ok {rc=0}
02:42:05.526360 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module>
    setup_run_iperf3_test_parallel(1)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=30876): Process ended prematurely: osmo-stp_10.42.42.5(pid=30876) [trial-2398↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30876)]