Skip to content
[Jenkins]Jenkins
log insign up

Changes

#630 (Oct 28, 2024, 10:01:06 AM)

  1. Remove ttcn3 testsuites ported to testenv, part 2 — Oliver Smith / detail

#629 (Oct 17, 2024, 7:56:06 AM)

  1. osmo-gsm-tester: use debian-bookworm-build — Oliver Smith / detail

#628 (Oct 16, 2024, 8:56:09 AM)

  1. make/Makefile: Update git branch references for asterisk and pjproject — Pau Espin Pedrol / detail

#627 (Oct 12, 2024, 4:51:06 PM)

  1. upgrade gerrit to 3.8.6 — laforge / detail
  2. upgrade gerrit to 3.9.5 — laforge / detail
  3. redmine: upgrade our docker container to redmine 5.1.3 — laforge / detail

#626 (Oct 7, 2024, 7:01:08 AM)

  1. fpga-build: Update RISC-V toolchain to riscv-none-elf — Sylvain Munaut / detail

#625 (Sep 20, 2024, 12:51:06 PM)

  1. debian-bookworm-titan: chown 1000 for deps — Oliver Smith / detail

#624 (Sep 12, 2024, 2:11:06 PM)

  1. debian-buster-jenkins: remove pysim — Oliver Smith / detail

#623 (Sep 12, 2024, 1:56:07 PM)

  1. osmo-stp-master: libosmo-sccp -> libosmo-sigtran — Oliver Smith / detail

#622 (Sep 11, 2024, 8:21:10 AM)

  1. debian-bookworm-build-arm: FROM: add arm32v7 — Oliver Smith / detail

#621 (Sep 10, 2024, 7:56:07 AM)

  1. osmo-*-master: don't install libosmo-sccp-dev — Oliver Smith / detail

#620 (Sep 9, 2024, 7:11:06 AM)

  1. Remove ttcn3 testsuites ported to testenv, part 1 — Oliver Smith / detail

#619 (Aug 23, 2024, 11:41:06 AM)

  1. ttcn3-epdg-test: restore osmo-epdg.latest.config — Oliver Smith / detail

#618 (Aug 13, 2024, 10:36:06 AM)

  1. ttcn3-epdg-test: fix osmo-epdg path for latest — Oliver Smith / detail

#617 (Aug 9, 2024, 8:01:08 AM)

  1. ttcn3-epdg-test: remove "cp osmo-epdg.latest.config" — Oliver Smith / detail

#616 (Aug 8, 2024, 9:21:08 AM)

  1. ttcn3-epdg-test: remove latest code path — Oliver Smith / detail

#615 (Aug 8, 2024, 9:11:08 AM)

  1. common/Release.key: update — Oliver Smith / detail

#614 (Aug 5, 2024, 12:31:09 PM)

  1. debian-bookworm-build: update sphinx-argparse branch — Oliver Smith / detail

#613 (Aug 2, 2024, 1:26:07 PM)

  1. scripts/kernel-test/smoke-test.sh: Log qemu output to stdout — Pau Espin Pedrol / detail

#612 (Aug 2, 2024, 9:31:06 AM)

  1. ttcn3-ggsn-test: Reduce timers for ggsn-test-kernel-torvalds — dwillmann / detail

#611 (Jul 27, 2024, 8:41:06 AM)

  1. ttcn3-stp-test: remove <= 1.8.x code path — Oliver Smith / detail

#610 (Jul 24, 2024, 3:26:08 PM)

  1. ttcn3-sgsn: Use new 172.18.8.104 in emulated RNC — Pau Espin Pedrol / detail

#609 (Jul 24, 2024, 3:16:08 PM)

  1. ttcn3-sgsn: Use 2nd IP address on emulated HNBGW — Pau Espin Pedrol / detail

#608 (Jul 24, 2024, 10:31:10 AM)

  1. asterisk: Enable use of EVS codec — Pau Espin Pedrol / detail

#607 (Jul 18, 2024, 10:11:09 AM)

  1. asterisk: extensions.conf: Allow extra MO call from SIP UA which HOLDed — Pau Espin Pedrol / detail

#606 (Jul 16, 2024, 5:51:07 PM)

  1. ttcn3-asterisk: pjsip.conf: Update config name s/ims_aka/volte/g — Pau Espin Pedrol / detail

#605 (Jul 16, 2024, 5:41:07 PM)

  1. ttcn3-asterisk: extensions.conf: Reject subsequent MO/MT calls in VoLTE — Pau Espin Pedrol / detail
  2. ttcn3-asterisk: extensions.conf: Reject calls if all SIP UAs busy in — Pau Espin Pedrol / detail

#604 (Jul 12, 2024, 10:41:08 AM)

  1. asterisk: dnsmasq.conf: Avoid forwarding queries to other DNS servers — Pau Espin Pedrol / detail
  2. asterisk: timeout ping DNS validations after 3 seconds — Pau Espin Pedrol / detail
  3. asterisk: Wait for Asterisk ready before starting testsuite — Pau Espin Pedrol / detail

#603 (Jul 12, 2024, 9:11:07 AM)

  1. centos7: use vault.centos.org — Oliver Smith / detail

#602 (Jul 11, 2024, 1:56:07 PM)

  1. asterisk: Wait for dnsmasq resolver ready before starting Asterisk — Pau Espin Pedrol / detail

#601 (Jul 11, 2024, 1:16:07 PM)

  1. dnsmasq: Log additional query info with --log-queries=extra — Pau Espin Pedrol / detail

#600 (Jul 10, 2024, 11:26:09 AM)

  1. asterisk: pjsip.conf: Forward Hold/Resume SIP UA -> IMS Core — Pau Espin Pedrol / detail

#599 (Jul 9, 2024, 4:16:07 PM)

  1. ttcn3-s1gw-test: update logging config in osmo-s1gw.config — Vadim Yanitskiy / detail

#598 (Jul 9, 2024, 2:26:07 PM)

  1. seccomp_profile: import — Oliver Smith / detail
  2. seccomp_profile: enable io_uring — Oliver Smith / detail

#597 (Jul 8, 2024, 8:21:07 AM)

  1. ttcn3-asterisk: Allow running testsuite with IPv4 and IPv6 configs — Pau Espin Pedrol / detail

#596 (Jul 5, 2024, 4:51:05 PM)

  1. ttcn3-asterisk: Small improvements to ease introducing IPv6 support — Pau Espin Pedrol / detail

#595 (Jul 4, 2024, 7:06:07 PM)

  1. osmo-epdg: add support for testing for latest — lynxis / detail

#594 (Jul 4, 2024, 1:31:05 PM)

  1. jenkins-common.sh: Store IP subnet prefix in global variable — Pau Espin Pedrol / detail

#593 (Jul 4, 2024, 12:51:10 PM)

  1. ttcn3-asterisk: Move ttcn3 docker related files to ttcn3/ subdir — Pau Espin Pedrol / detail

#592 (Jul 4, 2024, 12:46:08 PM)

  1. asterisk: conf: Handle precondition through app_waitforprecondition.so — Pau Espin Pedrol / detail
  2. asterisk: Allow alaw code from IMS until evs is supported — Pau Espin Pedrol / detail

#591 (Jul 3, 2024, 12:11:08 PM)

  1. ttcn3-ggsn-test/jenkins: tweak loop logic — Oliver Smith / detail

#590 (Jul 2, 2024, 5:16:08 PM)

  1. asterisk: pjsip.conf: Set IMEI — Pau Espin Pedrol / detail

#589 (Jul 2, 2024, 1:46:06 PM)

  1. ttcn3-asterisk: Fix ICSI value encoding — Pau Espin Pedrol / detail

#588 (Jun 26, 2024, 9:56:05 AM)

  1. asterisk: logger.conf: Log milliseconds in timestamps — Pau Espin Pedrol / detail
  2. asterisk-master: Fetch required branch directly — Pau Espin Pedrol / detail
  3. asterisk-master: Build from jolly/work branch by default — Pau Espin Pedrol / detail

#587 (Jun 25, 2024, 3:51:10 PM)

  1. ttcn3-asterisk: pjsip.conf: Avoid advertising support for +g.3gpp.smsip — Pau Espin Pedrol / detail
  2. ttcn3-asterisk: pjsip.conf: Use reliable provisional responses if peer — Pau Espin Pedrol / detail
  3. ttcn3-asterisk: Set mp_ims_imei matching pjsip.conf — Pau Espin Pedrol / detail

#586 (Jun 23, 2024, 10:41:10 AM)

  1. ttcn3-s1gw-test: start osmo-s1gw container with --user=root — Vadim Yanitskiy / detail

#585 (Jun 22, 2024, 7:36:10 PM)

  1. debian-{bullseye,bookworm}-erlang: fix non-alphabetic pkg order — Vadim Yanitskiy / detail
  2. debian-{bullseye,bookworm}-erlang: install iproute2 — Vadim Yanitskiy / detail
  3. ttcn3-s1gw-test: fix using unassigned addr for osmo-s1gw — Vadim Yanitskiy / detail

#584 (Jun 18, 2024, 10:16:09 PM)

  1. ttcn3-s1gw-test: fixup: align with the moduleparam naming changes — Vadim Yanitskiy / detail

#583 (Jun 18, 2024, 7:06:08 PM)

  1. ttcn3-s1gw-test: align with the moduleparam naming changes — Vadim Yanitskiy / detail

#582 (Jun 17, 2024, 7:51:05 AM)

  1. s1gw: add osmo-s1gw-master — Vadim Yanitskiy / detail
  2. s1gw: add ttcn3-s1gw-test — Vadim Yanitskiy / detail

#581 (Jun 12, 2024, 8:41:08 PM)

  1. jenkins-common: Treat -asan builds the same as -master — dwillmann / detail

#580 (Jun 11, 2024, 1:01:09 PM)

  1. debian-bookworm-*: useradd -d -m instead of mkdir — Oliver Smith / detail

#579 (Jun 11, 2024, 10:11:09 AM)

  1. asterisk: extensions.conf: Route non-local extensions towards IMS side — Pau Espin Pedrol / detail
  2. ttcn3-asterisk: Add extra IP addr in ttcn3 docker for IMS Core — Pau Espin Pedrol / detail
  3. asterisk: extensions.conf: Forward call from VoLTE to all registered — Pau Espin Pedrol / detail

#578 (Jun 11, 2024, 9:31:08 AM)

  1. debian-bookworm-obs-asan: new container — Oliver Smith / detail

#577 (Jun 6, 2024, 11:46:10 AM)

  1. asterisk: pjsip.conf: Set default p_access_network_info — Pau Espin Pedrol / detail

#576 (Jun 5, 2024, 9:16:07 PM)

  1. asterisk: pjsip.conf: Update IMS port asterisk config — Pau Espin Pedrol / detail

#575 (Jun 5, 2024, 11:06:07 AM)

  1. Introduce dnsmasq docker container — Pau Espin Pedrol / detail
  2. ttcn3-asterisk: Use dnsmasq to let asterisk resolve IMS DNS — Pau Espin Pedrol / detail
  3. asterisk: pjsip.conf: Configure Contact field — Pau Espin Pedrol / detail
  4. asterisk: pjsip.conf: identify incoming register started by local SIP — Pau Espin Pedrol / detail

#574 (Jun 4, 2024, 10:06:08 PM)

  1. asterisk: pjsip.conf: Fix msisdn not used in From field during IMS — Pau Espin Pedrol / detail

#573 (Jun 4, 2024, 12:56:09 PM)

  1. asterisk-master: Install AMR enc/dec dependencies — Pau Espin Pedrol / detail

#572 (Jun 4, 2024, 8:31:08 AM)

  1. asterisk: pjsip.conf: Use TCP when forwarding INVITE to IMS core — Pau Espin Pedrol / detail
  2. asterisk: pjsip.conf: Disable remote bridging between local SIP and IMS — Pau Espin Pedrol / detail

#571 (May 29, 2024, 11:41:06 AM)

  1. asterisk: pjsip.conf: Stop Asterisk doing unexpected REGISTER on IMS — Pau Espin Pedrol / detail
  2. asterisk: pjsip.conf: Enable USIM Auth over AMI interface — Pau Espin Pedrol / detail

#570 (May 21, 2024, 9:06:09 AM)

  1. ttcn3-bts-test: also execute tests from BTS_Tests_ASCI — Vadim Yanitskiy / detail
  2. ttcn3-bsc-test: also execute tests from BSC_Tests_ASCI — Vadim Yanitskiy / detail

#569 (May 17, 2024, 12:51:06 PM)

  1. ttcn3-asterisk: Configure docker testsuite to be able to set up ipsec — Pau Espin Pedrol / detail

#568 (May 17, 2024, 10:46:10 AM)

  1. debian-*: install pylint from debian repos — Oliver Smith / detail

#567 (May 17, 2024, 9:46:09 AM)

  1. Revert "ttcn3-docker-run.sh: Fix dumpcap failing to access /data inside — Oliver Smith / detail

#566 (May 17, 2024, 8:36:09 AM)

  1. ttcn3-ggsn-test-ogs: run smf in 4g only mode — Oliver Smith / detail

#565 (May 16, 2024, 8:36:06 AM)

  1. ttcn3-asterisk: Configure asterisk for initial SIP register on IMS side — Pau Espin Pedrol / detail
  2. ttcn3-docker-run.sh: Fix dumpcap failing to access /data inside docker — Pau Espin Pedrol / detail

#564 (May 15, 2024, 12:01:10 PM)

  1. ttcn3-asterisk: Enable debug in log file — Pau Espin Pedrol / detail
  2. ttcn3-asterisk: Enable debug for pjproject — Pau Espin Pedrol / detail

#563 (May 13, 2024, 9:26:09 AM)

  1. asterisk: Enable capabilities required to set up ipsec — Pau Espin Pedrol / detail

#562 (May 10, 2024, 2:31:08 PM)

  1. ttcn3-asterisk: Update Asterisk_Tests.cfg to adapt to new AMI_Adapter — Pau Espin Pedrol / detail

#561 (May 10, 2024, 2:26:07 PM)

  1. asterisk: manager.conf: Give more permissions to AMI user — Pau Espin Pedrol / detail

#560 (May 10, 2024, 1:36:07 PM)

  1. asterisk: pjsip.conf: Mark templates accordingly — Pau Espin Pedrol / detail

#559 (May 9, 2024, 3:31:10 PM)

  1. ttcn3-asterisk: Configure new IMS ConnHdlr — Pau Espin Pedrol / detail

#558 (May 6, 2024, 6:56:07 PM)

  1. asterisk-master: Use pjproject from external git repo — Pau Espin Pedrol / detail

#557 (Apr 25, 2024, 8:47:41 AM)

  1. ttcn3-sgsn-test-sns: add missing symlink to osmo-stp.cfg — Vadim Yanitskiy / detail

#556 (Apr 23, 2024, 9:46:07 AM)

  1. ttcn3-sgsn-test: add missing SGSN_Tests_NS.control — Vadim Yanitskiy / detail
  2. ttcn3-sgsn-test: add config files for running SNS testcases — Vadim Yanitskiy / detail

#555 (Apr 18, 2024, 6:11:07 PM)

  1. ttcn3-hnbgw: Apply latest changes to 'with-pfcp' scenario — Vadim Yanitskiy / detail

#554 (Apr 18, 2024, 1:51:08 PM)

  1. ttcn3-asterisk: Set Asterisk AMI IP address in Asterisk_Tests — Pau Espin Pedrol / detail

#553 (Apr 16, 2024, 9:16:08 PM)

  1. ttcn3-hnbgw: osmo-hnbgw.cfg: Switch from deprecated 'mgcp' node to 'mgw' — Pau Espin Pedrol / detail
  2. ttcn3-hnbgw: osmo-hnbgw.cfg: Enable color in log file — Pau Espin Pedrol / detail

#552 (Apr 16, 2024, 12:41:10 PM)

  1. ttcn3-hnbgw: Set STATSVTY.CTRL_HOSTNAME to correct IP address — Pau Espin Pedrol / detail

#551 (Apr 16, 2024, 11:21:08 AM)

  1. ttcn3-asterisk: Configure AMI — Pau Espin Pedrol / detail

#550 (Apr 16, 2024, 11:01:07 AM)

  1. ttcn3-hnbgw: Set new mp_local_statsd_ip module paramter to correct IP — Pau Espin Pedrol / detail

#549 (Apr 5, 2024, 2:31:08 PM)

  1. {open5gs,osmo-uecups}-latest: don't hardcode UID — Oliver Smith / detail
  2. debian-bookworm-obs-latest: add build user — Oliver Smith / detail

#548 (Apr 5, 2024, 11:46:08 AM)

  1. debian-bookworm-build: add libnftnl-dev — Oliver Smith / detail

#547 (Apr 3, 2024, 12:46:08 PM)

  1. scripts/kernel-test: do shallow fetch — Oliver Smith / detail
  2. kernel-test/kernel-build: update net-next branch — Oliver Smith / detail
  3. jenkins-common: fix_perms: chown files too — Oliver Smith / detail
  4. scripts/kernel-test: put mknod commands in init.sh — Oliver Smith / detail
  5. scripts/kernel-test: build initrd+kernel as user — Oliver Smith / detail

#546 (Apr 3, 2024, 12:01:08 PM)

  1. debian-bookworm-build: add virtualenv — Oliver Smith / detail

#545 (Apr 2, 2024, 9:16:10 AM)

  1. Introduce asterisk-master docker image — Pau Espin Pedrol / detail
  2. Introduce ttcn3-asterisk-ims-ue-test — Pau Espin Pedrol / detail

#544 (Apr 2, 2024, 8:26:06 AM)

  1. */osmo-bsc.cfg: BTS type 'sysmobts' (deprecated) -> osmo-bts — Vadim Yanitskiy / detail
  2. ttcn3-bsc-test-sccplite: osmo-bsc.cfg: remove deprecated 'mgw remote-ip' — Vadim Yanitskiy / detail

#543 (Mar 26, 2024, 2:31:10 PM)

  1. ttcn3-bts-test: fix start_config_oml(): do not start BSC — Vadim Yanitskiy / detail

#542 (Mar 25, 2024, 5:36:08 PM)

  1. ttcn3-*-test: set OSMO_SUT_{HOST,PORT} for more testsuites — Vadim Yanitskiy / detail

#541 (Mar 25, 2024, 2:01:07 PM)

  1. ttcn3-ggsn-test: ignore failure to kill osmo-ggsn — Oliver Smith / detail

#540 (Mar 25, 2024, 1:36:07 PM)

  1. ttcn3-bts-test: use start_config functions — Oliver Smith / detail

#539 (Mar 25, 2024, 1:21:07 PM)

  1. ttcn3-bts-test: abort if missing osmo-config-merge — Oliver Smith / detail

#538 (Mar 25, 2024, 11:26:08 AM)

  1. ttcn3-bts-test: add env var to not run all configs — Oliver Smith / detail
  2. ttcn3-ggsn-test/jenkins: add functions for start ggsn/testsuite — Oliver Smith / detail
  3. ttcn3-ggsn-test: move confgs to subdirs — Oliver Smith / detail
  4. ttcn3-ggsn-test: run with multiple configurations — Oliver Smith / detail

#537 (Mar 20, 2024, 11:46:09 AM)

  1. openbts-umts: fix apt: use archive.debian.org — Vadim Yanitskiy / detail

#536 (Mar 18, 2024, 12:01:10 PM)

  1. debian-bookworm-build: add libbladerf-dev — Oliver Smith / detail

#535 (Mar 7, 2024, 12:01:10 PM)

  1. ttcn3-stp-test: enable M3UA-over-TCP testing for master — Vadim Yanitskiy / detail

#534 (Mar 4, 2024, 7:11:06 PM)

  1. ttcn3-epdg: Set up params to get GTP-U echo working — laforge / detail
  2. ttcn3-epdg: Test GTP-U userplane — laforge / detail

#533 (Mar 4, 2024, 12:01:10 PM)

  1. ttcn3-ggsn-test: enable dynamic debug — Oliver Smith / detail
  2. ttcn3-ggsn-test: tweak log options — Oliver Smith / detail
  3. cosmetic: .txt file shouldn't have execute permissions set — laforge / detail

#532 (Mar 4, 2024, 7:51:07 AM)

  1. scripts/kernel-test: add /dev/null — Oliver Smith / detail

#531 (Feb 28, 2024, 1:16:08 PM)

  1. ttcn3-pgw-test: Configure open5gs-smfd S2b/S6b/P-CSCF related bits — Pau Espin Pedrol / detail

#530 (Feb 28, 2024, 10:11:08 AM)

  1. ttcn3-ggsn-test: kernel-gtp: add ipv6 — Oliver Smith / detail

#529 (Feb 22, 2024, 4:16:08 PM)

  1. ttcn3-epdg: Create tun with iface name gtp0 — Pau Espin Pedrol / detail
  2. ttcn3-epdg: Give some time for osmo-epdg to start — Pau Espin Pedrol / detail

#528 (Feb 19, 2024, 9:41:06 AM)

  1. ttcn3-ggsn-test/fragment.config: add NET_NS, VETH — Oliver Smith / detail

#527 (Feb 15, 2024, 1:56:08 PM)

  1. epdg: Configure gtpu tunnel — Pau Espin Pedrol / detail

#526 (Feb 12, 2024, 6:06:07 PM)

  1. fixup: ttcn3-bts-test: do not start osmo-bts-virtual / virtphy — Vadim Yanitskiy / detail

#525 (Feb 9, 2024, 11:21:06 AM)

  1. ttcn3-bts-test: do not start osmo-bts-virtual / virtphy containers — Vadim Yanitskiy / detail

#524 (Jan 22, 2024, 4:01:06 PM)

  1. ttcn3-epdg: Run osmo-epdg with CAP_NET_ADMIN — Pau Espin Pedrol / detail

#523 (Jan 19, 2024, 1:46:08 PM)

  1. ttcn3-epdg: Add section to control logging — Pau Espin Pedrol / detail

#522 (Jan 18, 2024, 1:06:09 PM)

  1. osmo-epdg-master: Remove rebar.lock to force build against updated — Pau Espin Pedrol / detail

#521 (Jan 17, 2024, 3:56:07 PM)

  1. ttcn3-epdg: Set new osmo-epdg diameter connect/wathdog configs — Pau Espin Pedrol / detail
  2. ttcn3-epdg: Update renamed config fields — Pau Espin Pedrol / detail

#520 (Jan 10, 2024, 4:06:06 PM)

  1. debian-{buster,bullseye}-jenkins: Add python3-cryptography from debian — laforge / detail
  2. upgrade gerrit to 3.7.6 — laforge / detail

#519 (Jan 9, 2024, 3:51:09 PM)

  1. ttcn3-msc-test: also execute ASCI (VBS/VGCS) testcases — Vadim Yanitskiy / detail

#518 (Jan 9, 2024, 1:18:20 PM)

  1. ttcn3-msc-test: set 'hlr' / 'ipa-name' explicitly — Vadim Yanitskiy / detail

#517 (Jan 3, 2024, 12:26:07 PM)

  1. mme: Use LAC from SGSN with most significat bit set to 0 — Pau Espin Pedrol / detail

#516 (Jan 2, 2024, 11:01:10 AM)

  1. ttcn3-mme: Set log level of open5gs-mmed to debug — Pau Espin Pedrol / detail

#515 (Dec 15, 2023, 1:16:06 PM)

  1. ttcn3-pcu-test: set PCUIFv12 for both -master and -latest — Vadim Yanitskiy / detail
  2. ttcn3-bts-test: set PCUIFv12 for both -master and -latest — Vadim Yanitskiy / detail

#514 (Nov 29, 2023, 2:36:08 PM)

  1. ttcn3-pcu-test/sns: fix PCUIF version number (follow up patch) — pmaier@sysmocom.de / detail

#513 (Nov 29, 2023, 10:06:22 AM)

  1. Revert "ttcn3-pcu-test/sns: fix PCUIF version number" — pmaier@sysmocom.de / detail

#512 (Nov 29, 2023, 9:21:06 AM)

  1. ttcn3-pcu-test/sns: fix PCUIF version number — pmaier@sysmocom.de / detail

#511 (Nov 24, 2023, 8:36:06 AM)

  1. open5gs configs: duplicate cfgs for latest/master — Oliver Smith / detail
  2. open5gs configs: update to current format — Oliver Smith / detail

#510 (Nov 24, 2023, 8:21:06 AM)

  1. open5gs configs: remove comments — Oliver Smith / detail

#509 (Nov 21, 2023, 9:21:06 AM)

  1. ttcn3-bts/pcu-test: Use PCUIF v12 for current master and PCUIF v11 for — pmaier@sysmocom.de / detail

#508 (Nov 15, 2023, 9:56:09 PM)

  1. Use 2023q1 osmo-ttcn3-hacks branch for 2023q1 SUTs — laforge / detail

#507 (Nov 14, 2023, 8:41:09 PM)

  1. ttcn3-dia2gsup-test/osmo_dia2gsup: set connect timer to 200 ms — lynxis / detail

#506 (Nov 9, 2023, 10:31:07 AM)

  1. ttcn3-hnbgw-test: reduce X31 to 5s — Oliver Smith / detail
  2. ttcn3-hnbgw: Use new module param mp_hnbgw_timer_x31 — Oliver Smith / detail

#505 (Nov 7, 2023, 12:26:08 PM)

  1. redmine: run 'apt upgrade' in Dockerfile to get glibc fix from Debian — laforge / detail
  2. sigtran-tests: Add note on why this is still using buster — laforge / detail

#504 (Oct 24, 2023, 9:36:07 PM)

  1. ttcn3-epdg: Configure S6b interface — Pau Espin Pedrol / detail

#503 (Oct 23, 2023, 2:51:09 PM)

  1. ttcn3-epdg-test: Update config file to set up GTPv2C socket — Pau Espin Pedrol / detail

#502 (Oct 19, 2023, 9:16:10 AM)

  1. Introduce osmo-epdg-master — Pau Espin Pedrol / detail
  2. Introduce ttcn3-epdg-test — Pau Espin Pedrol / detail

#501 (Oct 16, 2023, 2:56:10 PM)

  1. debian-bookworm-erlang: use debian's rebar3 — Oliver Smith / detail

#500 (Oct 16, 2023, 8:56:08 AM)

  1. common/ttcn3-docker-run.sh: add TEST_NAME env var — Oliver Smith / detail

#499 (Oct 15, 2023, 9:51:09 PM)

  1. open5gs-latest: Support debian bookworm — Pau Espin Pedrol / detail
  2. Introduce ttcn3-hss-test-ogs — Pau Espin Pedrol / detail
  3. ttcn3-hss-test-ogs: Adapt mongodb db setup to pass new test — Pau Espin Pedrol / detail

#498 (Oct 12, 2023, 2:31:10 PM)

  1. debian-bookworm-titan: add ccache — Oliver Smith / detail

#497 (Oct 10, 2023, 4:46:09 PM)

  1. open5gs-master: Make mongodb available in the image — Pau Espin Pedrol / detail

#496 (Oct 10, 2023, 4:16:09 PM)

  1. open5gs-master: Install open5gs-dbctl to /usr/bin — Pau Espin Pedrol / detail

#495 (Oct 10, 2023, 3:41:09 PM)

  1. open5gs-master: Fix indentation — Pau Espin Pedrol / detail

#494 (Oct 10, 2023, 12:26:08 PM)

  1. ttcn3-pcu-test: use PFUIF v10 for 2023q1 — Oliver Smith / detail

#493 (Oct 5, 2023, 8:41:08 PM)

  1. Fix osmo_dia2gsup-master not pulling in debian-bookworm-erlang dep image — Pau Espin Pedrol / detail

#492 (Sep 29, 2023, 11:36:07 AM)

  1. make/Makefile: update DISTRO, UPSTREAM_DISTRO — Oliver Smith / detail

#491 (Sep 21, 2023, 8:41:07 PM)

  1. ttcn3-mme: Fix missing IP/port config for S11 interface — Pau Espin Pedrol / detail

#490 (Sep 13, 2023, 8:11:10 AM)

  1. ttcn3-bts: Use PCUIF v11 — laforge / detail
  2. ttcn3-hnbgw: Update config files for latest after osmo-hnbgw new release — laforge / detail

#489 (Sep 2, 2023, 1:16:06 PM)

  1. gerrit: update to 3.6.6 — laforge / detail
  2. gerrit: upgrade to 3.7.4 — laforge / detail

#488 (Aug 31, 2023, 9:41:09 AM)

  1. ttcn3-dia2gsup: Avoid retrieving unexisting talloc report — Pau Espin Pedrol / detail

#487 (Aug 29, 2023, 8:41:07 AM)

  1. dia2gsup: Fix logfile name — Pau Espin Pedrol / detail

#486 (Aug 28, 2023, 3:21:06 PM)

  1. Introduce osmo-dia2gsup-master, ttcn3-dia2gsup-test — Pau Espin Pedrol / detail

#485 (Aug 28, 2023, 12:26:10 PM)

  1. debian-*-erlang: Install libsctp to enable sctp support in erlang apps — Pau Espin Pedrol / detail

#484 (Aug 28, 2023, 11:21:09 AM)

  1. debian-bookworm-build: add curl — Oliver Smith / detail

#483 (Aug 25, 2023, 1:16:05 PM)

  1. debian-bookworm-build: add libnftables-dev — Oliver Smith / detail

#482 (Aug 22, 2023, 9:06:07 AM)

  1. debian-bookworm-build: inkscape -> librsvg2-bin — Oliver Smith / detail
  2. fpga-build: use debian-bookworm-build — Oliver Smith / detail
  3. release-tarball-build-dist: remove — Oliver Smith / detail
  4. Cosmetic: debian-buster-jenkins: update comment — Oliver Smith / detail

#481 (Aug 14, 2023, 9:31:07 AM)

  1. debian-bookworm-titan{,-master}: new containers — Oliver Smith / detail
  2. ttcn3: use debian-bookworm-titan — Oliver Smith / detail

#480 (Aug 10, 2023, 1:26:07 AM)

  1. hnbgw: fixup: with-pfcp cfg: missing 'pfcp' section — Neels Hofmeyr / detail

#479 (Aug 10, 2023, 12:46:06 AM)

  1. hnbgw: fixup: with-pfcp cfg: set missing x26 timer — Neels Hofmeyr / detail

#478 (Aug 8, 2023, 5:46:06 AM)

  1. ttcn3-hnbgw-latest: fixup for cnpool: bind CTRL to 0.0.0.0 — Neels Hofmeyr / detail

#477 (Aug 8, 2023, 5:16:06 AM)

  1. hnbgw: fixup for cnpool: fix ASP IP addresses in osmo-stp.cfg — Neels Hofmeyr / detail

#476 (Aug 8, 2023, 4:31:05 AM)

  1. hnbgw: fixup for cnpool: re-add lost MGCP cfg — Neels Hofmeyr / detail
  2. hnbgw: fixup: adjust with-pfcp cfg like without-pfcp — Neels Hofmeyr / detail

#475 (Aug 8, 2023, 4:26:05 AM)

  1. hnbgw: tweak log — Neels Hofmeyr / detail

#474 (Aug 8, 2023, 4:06:05 AM)

  1. hnbgw-latest: fixup for cnpool: use correct osmo-stp.cfg file name — Neels Hofmeyr / detail

#473 (Aug 8, 2023, 3:51:10 AM)

  1. hnbgw-latest: fixup for cnpool: use correct cfg file name — Neels Hofmeyr / detail

#472 (Aug 8, 2023, 3:46:10 AM)

  1. hnbgw: fixup for cnpool: bind CTRL to 0.0.0.0 — Neels Hofmeyr / detail

#471 (Aug 8, 2023, 2:51:08 AM)

  1. hnbgw: adjust cfg for cnpool tests — Neels Hofmeyr / detail

#470 (Aug 7, 2023, 12:41:06 PM)

  1. ttcn3-mme-test-ogs: configure Gn interface — pmaier@sysmocom.de / detail

#469 (Aug 3, 2023, 12:41:09 PM)

  1. debian-bookworm-build{,-arm}: fix temp dir removal — Oliver Smith / detail

#468 (Jul 25, 2023, 3:26:08 PM)

  1. osmo-uecups-master: make osmocom user avilable — laforge / detail
  2. debian-bullseye-titan-*/Dockerfile: Replace inetutils-ping with — laforge / detail

#467 (Jul 25, 2023, 3:21:08 PM)

  1. ttcn3-hnbgw: fix disabling talloc report checks for hnbgw-latest — Pau Espin Pedrol / detail

#466 (Jul 21, 2023, 11:31:07 AM)

  1. scripts/kernel-test: add KERNEL_SKIP_REBUILD — Oliver Smith / detail
  2. scripts/kernel-test: add KERNEL_SKIP_SMOKE_TEST — Oliver Smith / detail
  3. kernel_test_prepare: use $DOCKER_ARGS — Oliver Smith / detail

#465 (Jul 21, 2023, 11:06:09 AM)

  1. open5gs-master: useradd: don't hardcode uid — Oliver Smith / detail
  2. open5gs-master: drop unknown option metrics_impl — Oliver Smith / detail

#464 (Jul 20, 2023, 8:06:09 AM)

  1. open5gs-master: use DISTRO variable — Oliver Smith / detail

#463 (Jul 18, 2023, 3:16:08 PM)

  1. Cosmetic: ttcn3-ggsn-test: env vars -> README — Oliver Smith / detail

#462 (Jul 18, 2023, 1:31:07 PM)

  1. hnbgw: Skip asn1 talloc mem checks in osmo-hnbgw-latest — Pau Espin Pedrol / detail

#461 (Jul 18, 2023, 1:11:07 PM)

  1. scripts/kernel-test: fixup for initrd_add_file — Oliver Smith / detail

#460 (Jul 18, 2023, 12:21:07 PM)

  1. scripts/kernel-test: adjust to usr-merge — Oliver Smith / detail
  2. scripts/kernel-test/run-qemu: set init=/init — Oliver Smith / detail
  3. scripts/kernel-test/run-qemu: update qemu args — Oliver Smith / detail

#459 (Jul 18, 2023, 11:46:06 AM)

  1. osmo-uecups-master: remove useradd — Oliver Smith / detail

#458 (Jul 17, 2023, 8:56:07 AM)

  1. jenkins-common: add + set default: debian bookworm — Oliver Smith / detail

#457 (Jul 17, 2023, 6:36:06 AM)

  1. debian-bookworm-build(-arm): new docker containers — laforge / detail
  2. debian-bookworm-erlang: new docker container — laforge / detail
  3. debian-bookworm-obs-latest: new container — laforge / detail

#456 (Jul 13, 2023, 3:26:10 PM)

  1. adjust HNBGW_Tests.cfg to changed HNBGW_Tests.ttcn — Neels Hofmeyr / detail

#455 (Jul 11, 2023, 2:51:07 PM)

  1. Install  liburing-dev in jenkins and build containers — laforge / detail

#454 (Jul 11, 2023, 2:31:07 PM)

  1. debian-bullseye-jenkins: add libcdk5-dev — Oliver Smith / detail

#453 (Jul 11, 2023, 1:56:10 PM)

  1. MME_Tests: add docker tests for MME — Pau Espin Pedrol / detail

#452 (Jul 9, 2023, 8:16:06 AM)

  1. ttcn3-bts-test/jenkins.sh: set mp_pcuif_version — laforge / detail

#451 (Jul 5, 2023, 1:51:06 PM)

  1. */osmo-stp.cfg: Explicitly define role & sctp-role — Pau Espin Pedrol / detail

#450 (Jul 5, 2023, 11:31:10 AM)

  1. redmine: fix auto-scan of repositories — Oliver Smith / detail

#449 (Jun 20, 2023, 12:56:10 PM)

  1. ttcn3-bts-test: fix config merge caching problem — Oliver Smith / detail

#448 (Jun 8, 2023, 7:01:06 PM)

  1. Explicitly configure ASPs asp-clnt-* as role=asp & sctp-role=client — Pau Espin Pedrol / detail

#447 (Apr 22, 2023, 1:56:06 AM)

  1. stp: Expand osmo-stp.cfg for "norctx" tests — laforge / detail

#446 (Apr 18, 2023, 10:06:06 AM)

  1. ttcn3-ggsn: Speed up tests by lowering retransmission T3,N3 timers — Pau Espin Pedrol / detail

#445 (Apr 5, 2023, 7:12:11 PM)

  1. debian-bullseye-jenkins: add iproute2 — Oliver Smith / detail

#444 (Mar 27, 2023, 12:16:10 PM)

  1. ttcn3-bts-test: enable running GPRS related tests with trxcon — Vadim Yanitskiy / detail

#443 (Mar 22, 2023, 9:16:05 AM)

  1. debian-bullseye-jenkins: sync with buster-jenkins — Oliver Smith / detail
  2. debian-bullseye-jenkins-arm: add new container — Oliver Smith / detail

#442 (Mar 20, 2023, 12:51:07 PM)

  1. README: add example: nightlies from different date — Oliver Smith / detail

#441 (Mar 17, 2023, 12:31:07 PM)

  1. debian-buster-jenkins: add ghostscript — Oliver Smith / detail

#440 (Mar 7, 2023, 9:06:08 AM)

  1. docker kill: wait until containers are stopped — Oliver Smith / detail

#439 (Mar 2, 2023, 2:01:09 PM)

  1. Introduce debian-bullseye-titan-master — Pau Espin Pedrol / detail

#438 (Feb 27, 2023, 10:46:06 AM)

  1. ttcn3-ggsn-test-ogs: update open5gs-{smf,upf} config files — Vadim Yanitskiy / detail

#437 (Feb 27, 2023, 8:51:07 AM)

  1. ttcn3-pgw-test: make the testsuite dir writable by all users — Vadim Yanitskiy / detail

#436 (Feb 24, 2023, 9:01:07 AM)

  1. ttcn3-pgw-test: update open5gs-{nrf,smf,upf} config files — Vadim Yanitskiy / detail

#435 (Feb 21, 2023, 8:29:01 AM)

  1. osmo-uecups-latest: install missing iputils-ping — Vadim Yanitskiy / detail
  2. open5gs-latest: install missing packages for ttcn3-pgw-test — Vadim Yanitskiy / detail
  3. open5gs-master: fix comment in Dockerfile — Vadim Yanitskiy / detail
  4. open5gs-latest: add osmocom user for ttcn3-pgw-test — Vadim Yanitskiy / detail

#434 (Feb 20, 2023, 11:25:31 AM)

  1. debian-bullseye-*: apt-key is deprecated, use [signed-by] instead — Vadim Yanitskiy / detail
  2. osmo-uecups-latest: new Dockerfile — Vadim Yanitskiy / detail
  3. ttcn3-pgw-test: allow using osmo-uecups from the latest feed — Vadim Yanitskiy / detail

#433 (Feb 19, 2023, 12:56:10 PM)

  1. upgrade to gerrit 3.6.3 — laforge / detail

#432 (Feb 13, 2023, 10:21:48 PM)

  1. ttcn3-bsc-test: sleep 1s before starting testsuite — Oliver Smith / detail

#431 (Feb 9, 2023, 8:21:09 AM)

  1. release-tarball: support git submodules — Oliver Smith / detail
  2. release-tarball: fix osmo-trx 1.5.0 — Oliver Smith / detail
  3. release-tarball: remove PARALLEL_MAKE variable — Oliver Smith / detail
  4. release-tarball: add var to use list from jenkins — Oliver Smith / detail
  5. release-tarball: add libosmo-pfcp, libgtpnl — Oliver Smith / detail

#430 (Feb 8, 2023, 1:26:07 PM)

  1. release-tarball: add missing cd /build — Oliver Smith / detail

#429 (Feb 8, 2023, 11:46:06 AM)

  1. ttcn3-*: Update test setup after Osmocom CNI release 202302 — Pau Espin Pedrol / detail

#428 (Feb 8, 2023, 10:56:06 AM)

  1. jenkins-common.sh: open5gs-latest does not require debian-bullseye-build — Vadim Yanitskiy / detail

#427 (Jan 30, 2023, 1:31:09 PM)

  1. FR testsuites: clean up all networks before start — Oliver Smith / detail

#426 (Jan 23, 2023, 1:11:09 PM)

  1. debian-buster-jenkins-arm: new image — Oliver Smith / detail

#425 (Jan 18, 2023, 4:31:09 PM)

  1. ttcn3-bts-test: replace subnets during 'make cfg' — Oliver Smith / detail

#424 (Jan 18, 2023, 9:21:07 AM)

  1. debian-buster-jenkins: install ccache — Oliver Smith / detail

#423 (Jan 17, 2023, 2:51:09 PM)

  1. kernel_test_wait_for_vm: increase timeout to 15s — Oliver Smith / detail

#422 (Jan 17, 2023, 12:51:09 PM)

  1. network_create: set NET_NAME after next SUBNET — Oliver Smith / detail

#421 (Jan 17, 2023, 12:36:09 PM)

  1. jenkins-common: replace subnet in scm files too — Oliver Smith / detail

#420 (Jan 17, 2023, 9:16:06 AM)

  1. network_create: put SUBNET in NET_NAME — Oliver Smith / detail

#419 (Jan 16, 2023, 3:21:05 PM)

  1. network_create: find free subnet automatically — Oliver Smith / detail

#418 (Jan 16, 2023, 11:46:08 AM)

  1. ttcn3-*/jenkins*.sh: use $SUBNET everywhere — Oliver Smith / detail

#417 (Jan 12, 2023, 2:46:06 PM)

  1. */Dockerfile: clone from gerrit.osmocom.org using https:// — Vadim Yanitskiy / detail

#416 (Jan 9, 2023, 4:21:07 PM)

  1. ttcn3-upf-test: fetch /tmp/commit from gerrit, not from cgit — Vadim Yanitskiy / detail

#415 (Dec 22, 2022, 3:16:07 PM)

  1. jenkins-common: tweak echo messages — Oliver Smith / detail
  2. ttcn3-ggsn-test: cp initrd-ggsn.sh to VOL_BASE_DIR — Oliver Smith / detail
  3. scripts/regen_doc: use SUBNET variable — Oliver Smith / detail

#414 (Dec 22, 2022, 2:24:01 PM)

  1. *-repo-install-test: remove — Oliver Smith / detail

#413 (Dec 2, 2022, 11:16:09 AM)

  1. ttcn3-docker-run.sh: Use interface "up" flag, not operstate — laforge / detail

#412 (Dec 1, 2022, 3:26:05 PM)

  1. osmo-gsm-tester: fix getting latest commit — Oliver Smith / detail

#411 (Nov 30, 2022, 4:46:09 PM)

  1. release-tarball-build-dist: order install pkgs — Oliver Smith / detail
  2. release-tarball-build-dist: move rsync into docker — Oliver Smith / detail
  3. release-tarball-build-dist: check exists on server — Oliver Smith / detail
  4. release-tarball-build-dist: fix missing dir crash — Oliver Smith / detail
  5. release-tarball-build-dist: fix permission errors — Oliver Smith / detail

#410 (Nov 30, 2022, 12:41:06 PM)

  1. upgrade gerrit to 3.4.8 — laforge / detail

#409 (Nov 21, 2022, 11:31:06 AM)

  1. ttcn3-{pgw,ggsn}-test: Update smf.yml with new metrics section location — Pau Espin Pedrol / detail

#408 (Nov 15, 2022, 7:41:05 PM)

  1. ttcn3-pgw-test: update freeDiameter-smf.conf — Vadim Yanitskiy / detail
  2. ttcn3-ggsn-test-ogs: update freeDiameter-smf.conf — Vadim Yanitskiy / detail
  3. open5gs-latest: migrate from debian:buster to debian:bullseye — Vadim Yanitskiy / detail

#407 (Nov 7, 2022, 10:23:46 AM)

  1. hnbgw: Only build with_pfcp on master — daniel / detail

#406 (Nov 4, 2022, 10:21:07 AM)

  1. debian-buster-jenkins: add more pysim related deps — Oliver Smith / detail

#405 (Nov 3, 2022, 4:36:08 PM)

  1. ttcn3-bsc-test: Fix ttcn3-bsc_sccplite-latest — dwillmann / detail

#404 (Oct 24, 2022, 2:16:06 PM)

  1. debian-buster-jenkins: add pysim doc/lint depends — Oliver Smith / detail

#403 (Oct 20, 2022, 2:56:09 PM)

  1. ttcn3-bsc: Update osmo-bsc cfg files to use mgw pooling VTY commands — Pau Espin Pedrol / detail

#402 (Oct 17, 2022, 9:41:10 AM)

  1. debian-buster-jenkins: skip llvm for arch !x86_64 — Oliver Smith / detail

#401 (Oct 14, 2022, 11:11:07 AM)

  1. Revert "debian-buster-build: add LLVMEmbeddedToolchainForArm" — Oliver Smith / detail
  2. debian-buster-jenkins: order pkgs alphabetically — Oliver Smith / detail
  3. debian-buster-jenkins: add LLVMEmbeddedToolchainForArm — Oliver Smith / detail

#400 (Oct 13, 2022, 11:51:06 AM)

  1. debian-buster-build: order pkgs alphabetically — Oliver Smith / detail
  2. debian-buster-build: add LLVMEmbeddedToolchainForArm — Oliver Smith / detail

#399 (Oct 12, 2022, 1:26:09 PM)

  1. ttcn3-mgw: Increase number of enpoints in osmo-mgw.cfg — Pau Espin Pedrol / detail

#398 (Oct 11, 2022, 7:26:06 PM)

  1. ttcn3-mgw: jenkins.sh Fix centos tests — Pau Espin Pedrol / detail

#397 (Oct 5, 2022, 8:46:06 AM)

  1. ttcn3-mgw: Set osmux bind-ip(-v6) VTY configs — Pau Espin Pedrol / detail

#396 (Oct 3, 2022, 9:16:06 AM)

  1. ttcn3-pcu-test: osmo-pcu.cfg: use 'gsmtap-category enable-all' — Vadim Yanitskiy / detail
  2. ttcn3-pcu-test: osmo-pcu.cfg: use 'gsmtap-remote-host' — Vadim Yanitskiy / detail

#395 (Sep 26, 2022, 12:16:06 PM)

  1. .gitignore vim swp files — Neels Hofmeyr / detail
  2. add osmo-upf-master — Neels Hofmeyr / detail
  3. add ttcn3-upf-test — Neels Hofmeyr / detail

#394 (Sep 21, 2022, 2:01:07 PM)

  1. ttcn3-hnbgw: Set different junit xml file name prefix for with-pfcp — Pau Espin Pedrol / detail
  2. ttcn3-hnbgw: sed junit file in the clean_up trap — Pau Espin Pedrol / detail

#393 (Sep 20, 2022, 12:41:08 PM)

  1. Use gerrit as osmo-ttcn3-hacks.git git remote — Pau Espin Pedrol / detail

#392 (Sep 15, 2022, 5:21:05 PM)

  1. add ttcn3-hnbgw-test variant with-pfcp — Neels Hofmeyr / detail

#391 (Sep 15, 2022, 12:56:08 PM)

  1. osmo-hnbgw-master: build with --enable-pfcp — Neels Hofmeyr / detail

#390 (Sep 14, 2022, 12:21:08 PM)

  1. ttcn3-bts: Add osmux configurations — Pau Espin Pedrol / detail

#389 (Sep 13, 2022, 12:01:07 PM)

  1. ttcn3-hnbgw: Enable gsmtap logging — Pau Espin Pedrol / detail

#388 (Sep 7, 2022, 9:41:09 AM)

  1. osmo-bts-master: Depend on libosmo-netif — Pau Espin Pedrol / detail

#387 (Sep 5, 2022, 11:31:08 AM)

  1. debian-bullseye-titan: Discontinue the use of git:// — laforge / detail

#386 (Aug 31, 2022, 11:06:06 AM)

  1. debian-bullseye-titan: Use gitea, not obsolete cgit — laforge / detail

#385 (Aug 30, 2022, 4:01:09 PM)

  1. ttcn3-bsc: Enable OSMUX feature in osmo-bts-omldummy — Pau Espin Pedrol / detail

#383 (Aug 17, 2022, 6:01:05 AM)

  1. osmo-hlr-master: install libsqlite3-dev/sqlite-devel — Vadim Yanitskiy / detail
  2. osmo-msc-master: install libsqlite3-dev/sqlite-devel — Vadim Yanitskiy / detail

#382 (Aug 4, 2022, 12:51:08 PM)

  1. fix_perms: use debian:bullseye — Oliver Smith / detail

#381 (Aug 4, 2022, 11:41:07 AM)

  1. ttcn3-cbc: Update osmo-cbc.cfg, CBC_Tests.cfg to latest ttcn3 testsuite — Pau Espin Pedrol / detail

#380 (Aug 3, 2022, 2:26:08 PM)

  1. osmo-hnodeb-latest: new container — Oliver Smith / detail

#379 (Aug 2, 2022, 8:41:08 AM)

  1. ttcn3-cbc: Adapt ports in osmo-cbc.git to default ttcn3 ones — Pau Espin Pedrol / detail
  2. ttcn3-cbc: Disable gsmtap_log debug for dasn1c category — Pau Espin Pedrol / detail

#378 (Jul 27, 2022, 11:56:07 AM)

  1. ttcn3-cbc: Set mode server in osmo-cbc.cfg — Pau Espin Pedrol / detail

#377 (Jul 22, 2022, 5:51:06 PM)

  1. ttcn3-cbc: Adapt osmo-cbc 'peer' node to new format — Pau Espin Pedrol / detail

#376 (Jul 22, 2022, 11:56:08 AM)

  1. ttcn3-cbc: Reorder osmo-cbc.cfg nodes — Pau Espin Pedrol / detail

#375 (Jul 20, 2022, 1:51:06 PM)

  1. osmo-cbc-master: Fix missing ldconfig — Pau Espin Pedrol / detail

#374 (Jul 19, 2022, 3:11:07 PM)

  1. ttcn3-cbc: Update osmo-cbc.cfg to test SBc-AP — Pau Espin Pedrol / detail

#373 (Jul 12, 2022, 2:46:08 PM)

  1. ttcn3-cbc: Enable gsmtap log — Pau Espin Pedrol / detail

#372 (Jul 12, 2022, 2:36:08 PM)

  1. debian-bullseye-jenkins: new container — Oliver Smith / detail

#371 (Jul 8, 2022, 8:26:07 PM)

  1. debian11-repo-install-test: add container — Oliver Smith / detail

#370 (Jul 6, 2022, 3:21:09 PM)

  1. Remove several unused containers — Oliver Smith / detail

#369 (Jul 6, 2022, 12:06:07 PM)

  1. release-tarball-build-dist/Makefile: update — Oliver Smith / detail
  2. */.release: remove — Oliver Smith / detail

#368 (Jun 29, 2022, 1:26:07 PM)

  1. release-tarball-build-dist: upgrade from debian 9 — Oliver Smith / detail
  2. release-tarball-build-dist: move osmo-ci code here — Oliver Smith / detail

#367 (Jun 29, 2022, 9:36:09 AM)

  1. osmo-gsm-tester: use debian's soapysdr-module-lms7 — Oliver Smith / detail

#366 (Jun 28, 2022, 3:37:18 PM)

  1. debian-stretch-jenkins: add apt-transport-https — Oliver Smith / detail

#365 (Jun 28, 2022, 2:11:08 PM)

  1. Install ca-certificates before Osmocom repo — Oliver Smith / detail
  2. Use Osmocom OBS — Oliver Smith / detail

#364 (Jun 20, 2022, 7:11:09 PM)

  1. cgit: fix Atom feed hostname from localhost to cgit.osmocom.org — laforge / detail
  2. cgit: Fix Atom feed scheme from http to https — laforge / detail

#363 (Jun 19, 2022, 2:21:09 PM)

  1. add debian-sid-jenkins — Neels Hofmeyr / detail

#362 (Jun 16, 2022, 9:56:07 PM)

  1. make: Allow passing OSMO_CBC_BRANCH to docker — Pau Espin Pedrol / detail

#361 (Jun 15, 2022, 8:36:09 PM)

  1. debian-bullseye-titan: Update libfftranscode 0.3->0.5 — Pau Espin Pedrol / detail

#360 (Jun 10, 2022, 4:06:08 AM)

  1. gerrit: update to 3.4.5 — laforge / detail
  2. cgit: more verbose logging format in access.log — laforge / detail

#359 (Jun 8, 2022, 7:01:06 PM)

  1. ttcn3-bsc-test/jenkins-sccplite.sh: configure 4 TRX for BTS2 — Vadim Yanitskiy / detail
  2. ttcn3-bsc-test/jenkins-sccplite.sh: fix missing osmo-bts-omldummy logs — Vadim Yanitskiy / detail

#358 (Jun 8, 2022, 12:41:08 PM)

  1. open5gs: Enable libmetrics prometheus implementation — Pau Espin Pedrol / detail

#357 (Jun 7, 2022, 10:31:09 AM)

  1. ttcn3-bsc-test-sccplite/osmo-bsc.cfg: configure 3 additional TRX — Vadim Yanitskiy / detail

#356 (Jun 7, 2022, 9:51:09 AM)

  1. ttcn3-bsc-test/osmo-bsc.cfg: configure 3 additional TRX instances for — Vadim Yanitskiy / detail

#355 (May 30, 2022, 11:41:10 AM)

  1. jenkins-common: docker_depends: add open5gs — Oliver Smith / detail

#354 (May 30, 2022, 11:31:10 AM)

  1. common/Release.key: update — Oliver Smith / detail

#353 (May 30, 2022, 9:11:08 AM)

  1. osmo-bsc.cfg: change logging level nm info -> notice — Vadim Yanitskiy / detail

#352 (May 19, 2022, 7:36:10 PM)

  1. common/Release.key: update — Oliver Smith / detail

#351 (May 15, 2022, 8:11:06 AM)

  1. */Dockerfile: drop MAINTAINER line — Oliver Smith / detail

#350 (May 13, 2022, 4:21:06 PM)

  1. osmocom-bb-host-master: modernize — Oliver Smith / detail

#349 (May 4, 2022, 9:16:06 AM)

  1. debian-bullseye-build: add libmnl-dev — Oliver Smith / detail

#348 (May 3, 2022, 4:19:48 PM)

  1. ttcn3-bsc-test: set osmo-bts-omldummy features — Oliver Smith / detail

#347 (May 3, 2022, 9:11:10 AM)

  1. ttcn3-ggsn-test-ogs: set CAP_NET_RAW for open5gs-upfd — Pau Espin Pedrol / detail

#346 (Apr 24, 2022, 4:21:08 PM)

  1. debian-buster-jenkins: install libelf-dev — laforge / detail

#345 (Apr 22, 2022, 10:01:06 AM)

  1. ttcn3-pgw: Configure Gy interface — Pau Espin Pedrol / detail

#344 (Apr 17, 2022, 2:16:09 PM)

  1. ttcn3-bsc-test/osmo-bsc.cfg: set AMR link adaptation params — Vadim Yanitskiy / detail

#343 (Apr 17, 2022, 1:16:06 PM)

  1. Revert "osmo-bsc-{master,latest}/osmo-bsc.cfg: set AMR link adaptation — Vadim Yanitskiy / detail

#342 (Apr 15, 2022, 4:56:06 AM)

  1. osmo-bsc-{master,latest}/osmo-bsc.cfg: set AMR link adaptation params — Vadim Yanitskiy / detail

#341 (Apr 14, 2022, 4:56:06 PM)

  1. open5gs-latest: fix Dockerfile: avoid using curl for downloading keys — Vadim Yanitskiy / detail

#340 (Apr 12, 2022, 12:21:08 PM)

  1. ttcn-pgw-test: Improve osmo-uecups cfg file — Pau Espin Pedrol / detail

#339 (Apr 12, 2022, 11:41:08 AM)

  1. ttcn-ggsn: Configure open5gs-smfd to connect to TTCN3 OCS — Pau Espin Pedrol / detail

#338 (Apr 12, 2022, 10:01:05 AM)

  1. make: Allow passing OSMO_UECUPS_BRANCH — Pau Espin Pedrol / detail

#337 (Apr 11, 2022, 12:06:05 PM)

  1. ttcn3-pgw: Pass config file to osmo-uecups — Pau Espin Pedrol / detail
  2. ttcn3-pgw: Parallel docker container stop — Pau Espin Pedrol / detail

#336 (Apr 7, 2022, 6:51:06 PM)

  1. ttcn3-ggsn-ogs: Rename config files — Pau Espin Pedrol / detail
  2. ttcn3-pgw-test: Log stdout to find crashes — Pau Espin Pedrol / detail
  3. ttcn3-pgw-test: Use process name in log file — Pau Espin Pedrol / detail
  4. ttcn3-{pgw,ggsn}-tests: Add comment with procedure to get open5gs-smfd — Pau Espin Pedrol / detail
  5. ttcn3-pgw-tests: use same bootstrap for upfd as in ttcn-ggsn-tests-ogs — Pau Espin Pedrol / detail
  6. ttcn3-pgw-test: Log open5gs-nrfd stdout/stderr — Pau Espin Pedrol / detail
  7. ttcn3-{ggsn,pgw}-test: Avoid open5gs itself logging to a file — Pau Espin Pedrol / detail

#335 (Mar 27, 2022, 10:41:08 AM)

  1. gr-gsm-master: migrate from archlinux to debian-bullseye-build — Vadim Yanitskiy / detail

#334 (Mar 16, 2022, 12:56:09 PM)

  1. ttcn3-ggsn-ogs: Use new bind_dev config option for GTP sockets — Pau Espin Pedrol / detail

#333 (Mar 9, 2022, 1:16:09 PM)

  1. ttcn3-ggsn-ogs: Change diameter node id to pcrf — Pau Espin Pedrol / detail

#332 (Mar 7, 2022, 12:56:06 PM)

  1. centos8-repo-install-test: set UPSTREAM_DISTRO=almalinux:8 in Makefile — Vadim Yanitskiy / detail

#331 (Mar 1, 2022, 11:56:09 AM)

  1. debian-*-jenkins: git clone from gerrit — Oliver Smith / detail

#330 (Mar 1, 2022, 11:46:09 AM)

  1. ttcn3-ggsn: Modify configs to alloc bigger IPv4 pools — Pau Espin Pedrol / detail

#329 (Feb 22, 2022, 12:01:07 PM)

  1. ttcn3-fr-test/jenkins.sh: revert docker run --rm — Oliver Smith / detail
  2. ttcn3-fr-test/jenkins.sh: make use of clean_up() — Oliver Smith / detail

#328 (Feb 21, 2022, 10:41:08 AM)

  1. ttcn3-ggsn-test-ogs: Run all tests — Pau Espin Pedrol / detail

#327 (Feb 18, 2022, 3:16:08 PM)

  1. Add ttcn3-hnbgw-test docker container — dwillmann / detail

#326 (Feb 17, 2022, 7:36:08 PM)

  1. osmo-hnbgw-master: Fix build dependencies — dwillmann / detail

#325 (Feb 16, 2022, 7:31:07 PM)

  1. Remove debian-buster-erlang — Pau Espin Pedrol / detail

#324 (Feb 16, 2022, 5:48:34 PM)

  1. debian-bullseye-erlang: Build rebar3 from source — Pau Espin Pedrol / detail

#323 (Feb 16, 2022, 3:36:09 PM)

  1. Add debian-bullseye-erlang docker image — Pau Espin Pedrol / detail

#322 (Feb 14, 2022, 8:06:07 AM)

  1. treewide: fix missing --rm for "docker run" — Oliver Smith / detail

#321 (Feb 14, 2022, 7:51:07 AM)

  1. make/Makefile: always use docker run --rm — Oliver Smith / detail
  2. common/pipework: deduplicate — Oliver Smith / detail

#320 (Feb 11, 2022, 6:41:05 PM)

  1. ttcn3-ggsn-tests-ogs: Set correct DNS address to get ping working — Pau Espin Pedrol / detail
  2. ttcn3-ggsn-tests-ogs: Configuration fixes for IPv6 tests — Pau Espin Pedrol / detail

#319 (Feb 11, 2022, 12:06:07 PM)

  1. make/Makefile: allow overriding '-it' for target 'run' — Vadim Yanitskiy / detail

#318 (Feb 10, 2022, 4:56:09 PM)

  1. ttcn3-bts-test: use osmo-config-merge to generate config files — Vadim Yanitskiy / detail

#317 (Feb 10, 2022, 4:51:08 PM)

  1. ttcn3-bts-test: move generic config files into a directory — Vadim Yanitskiy / detail

#316 (Feb 8, 2022, 4:46:09 PM)

  1. ttcn3-ggsn-test-ogs: Configure correct GTP-U GGSN address — laforge / detail

#315 (Feb 7, 2022, 5:21:07 PM)

  1. make/Makefile: generalize passing additional build arguments — Vadim Yanitskiy / detail

#314 (Feb 7, 2022, 10:56:08 AM)

  1. open5gs-master: install dependencies using apt-get build-dep — Vadim Yanitskiy / detail
  2. open5gs-master: ensure consistent install paths with '-latest' — Vadim Yanitskiy / detail

#313 (Feb 7, 2022, 9:41:07 AM)

  1. fixup: debian-bullseye-titan: run 8 parallel jobs for 'make deps' — Vadim Yanitskiy / detail

#312 (Feb 7, 2022, 8:51:07 AM)

  1. Add ttcn3-ggsn-ogs testsuite — Pau Espin Pedrol / detail

#311 (Feb 4, 2022, 1:36:08 PM)

  1. debian-bullseye-titan: run 8 parallel jobs for 'make deps' — Vadim Yanitskiy / detail
  2. debian-{bullseye,buster,jessie}-build: install 'equivs' package — Vadim Yanitskiy / detail
  3. open5gs-master: migrate to debian-bullseye-build — Vadim Yanitskiy / detail

#310 (Feb 4, 2022, 1:16:08 PM)

  1. debian-stretch-jenkins: install libelf-dev — Oliver Smith / detail

#308 (Feb 4, 2022, 8:41:06 AM)

  1. make: Add OPEN5GS_BRANCH build arg — Pau Espin Pedrol / detail

#307 (Feb 3, 2022, 12:06:07 PM)

  1. ttcn3-pgw-test: configure the 'ogstun' device for open5gs-upfd — Vadim Yanitskiy / detail
  2. open5gs-master: remove both setup.sh and pgw.sh — Vadim Yanitskiy / detail

#306 (Feb 2, 2022, 5:46:09 PM)

  1. ttcn3-pgw-test: make osmo-uecups-daemon more verbose — Vadim Yanitskiy / detail
  2. osmo-uecups-master: install iputils-ping for ttcn3-pgw-test — Vadim Yanitskiy / detail
  3. ttcn3-pgw-test: set PGW_Tests.mp_run_prog_log_path to '/data' — Vadim Yanitskiy / detail

#305 (Feb 2, 2022, 10:06:06 AM)

  1. treewide: use almalinux instead of centos8 — laforge / detail

#304 (Jan 31, 2022, 9:56:08 AM)

  1. ttcn3-bsc-test-vamos: set OSMO_SUT_{HOST,PORT} — Vadim Yanitskiy / detail
  2. ttcn3-bsc-test-sccplite: set OSMO_SUT_{HOST,PORT} — Vadim Yanitskiy / detail

#303 (Jan 29, 2022, 1:01:08 PM)

  1. ttcn3-pgw-test: fix jenkins.sh: do not use bash specific syntax — Vadim Yanitskiy / detail

#302 (Jan 26, 2022, 4:51:17 PM)

  1. ttcn3-pgw-test: add Dockerfile, jenkins.sh and configs for open5gs — Vadim Yanitskiy / detail
  2. ttcn3-pgw-test: set '--ulimit core=-1' for open5gs-{nrf,upf,smf} — Vadim Yanitskiy / detail
  3. ttcn3-pgw-test: set '--ulimit core=-1' for osmo-uecups-daemon — Vadim Yanitskiy / detail
  4. osmo-uecups-master/Dockerfile: fix copy-pasted ARG OSMO_BSC_BRANCH — laforge / detail
  5. osmo-uecups-master: add more complete osmo-uecups-daemon.cfg — laforge / detail
  6. ttcn3-bsc-test/jenkins.sh: fix '--ulimit core=-1' set twice — laforge / detail

#301 (Jan 17, 2022, 5:31:06 PM)

  1. gerrit: upgrade to 3.3.9 based container — laforge / detail
  2. gerrit: Upgrade to 3.4.3 — laforge / detail

#300 (Jan 5, 2022, 5:46:06 PM)

  1. Use osmo-hnbgw from osmo-hnbgw.git instead of osmo-iuh.git — Pau Espin Pedrol / detail

#299 (Dec 24, 2021, 12:26:09 PM)

  1. osmo-hnodeb-master: no longer depend on libgtp — Pau Espin Pedrol / detail

#298 (Dec 24, 2021, 10:59:05 AM)

  1. osmo-remsim-test-latest: install client-shell — laforge / detail

#297 (Dec 23, 2021, 5:21:10 PM)

  1. jenkins-common.sh: add d9 to upstream_distro func — Oliver Smith / detail

#296 (Dec 17, 2021, 3:26:07 PM)

  1. scripts/kernel-test/run-qemu.sh: update qemu args — Oliver Smith / detail
  2. osmo-ggsn-*: install iproute2 for kernel tests — Oliver Smith / detail

#295 (Dec 16, 2021, 4:06:07 PM)

  1. debian-bullseye-titan: sort pkgs alphabetically — Oliver Smith / detail
  2. debian-bullseye-titan: install ping — Oliver Smith / detail

#294 (Dec 16, 2021, 1:41:06 PM)

  1. Add Dockerfile for OpenBTS-UMTS — Vadim Yanitskiy / detail

#293 (Dec 16, 2021, 12:11:05 PM)

  1. debian-bullseye-obs-latest: new image — Oliver Smith / detail

#292 (Dec 16, 2021, 10:56:09 AM)

  1. titan: move from debian-stetch-titan to debian-bullseye-titan — laforge / detail
  2. Switch ttcn3-* master tests from Debian stretch to bullseys — laforge / detail
  3. nplab: Switch from stretch to buster — laforge / detail
  4. sctp-test: Upgrade to bullseye — Oliver Smith / detail

#291 (Dec 16, 2021, 10:41:08 AM)

  1. jenkins-common.sh: non-jenkins: unique build tag — Oliver Smith / detail

#290 (Dec 15, 2021, 8:11:07 PM)

  1. nplab-*test: Fix printing of junit on stdout — laforge / detail

#289 (Dec 15, 2021, 6:06:06 PM)

  1. sync debian-buster-build with debian-stretch-build — laforge / detail
  2. Add debian-bullseye-build container — laforge / detail
  3. debian-{buster,stretch}-*: Explicitly specify DISTRO variables — laforge / detail
  4. bsc-test: Reduce log verbosity of osmo-stp — laforge / detail

#288 (Dec 15, 2021, 5:21:06 PM)

  1. osmo-remsim-latest: fix apt install command — Oliver Smith / detail
  2. osmo-remsim-latest: add logic for centos pkgs — Oliver Smith / detail

#287 (Dec 15, 2021, 2:41:05 PM)

  1. hnodeb: Update Dockerfile, configs with new deps, configs — Pau Espin Pedrol / detail

#286 (Dec 15, 2021, 2:31:09 PM)

  1. ttcn3-{sgsn,ggsn}-test: set OSMO_SUT_{HOST,PORT} — Vadim Yanitskiy / detail

#285 (Dec 14, 2021, 1:18:28 PM)

  1. ttcn3-bts-test/osmo-bts.cfg: use default {fn,rts}-advance values — laforge / detail

#284 (Dec 13, 2021, 3:31:06 PM)

  1. debian-stretch-build-dist: add python3-nwdiag — Oliver Smith / detail

#283 (Dec 13, 2021, 12:11:05 PM)

  1. osmo-pcap-master: doesn't need libosmo-netif — Oliver Smith / detail
  2. osmo-pcap-latest: fix install path for centos — Oliver Smith / detail

#282 (Dec 13, 2021, 12:01:05 PM)

  1. debian-stretch-build-dist: osmo-gsm-manuals deps — Oliver Smith / detail
  2. debian-stretch-build-dist: osmo-hnodeb deps — Oliver Smith / detail
  3. debian-stretch-build-dist: osmo-pcap deps — Oliver Smith / detail
  4. debian-stretch-build-dist: osmo-remsim deps — Oliver Smith / detail
  5. debian-stretch-build-dist: osmo-uecups deps — Oliver Smith / detail

#281 (Dec 11, 2021, 3:21:06 PM)

  1. Add centos7 containers — laforge / detail

#280 (Dec 10, 2021, 11:01:08 PM)

  1. osmo-pcap-latest: fix typo in Dockerfile: s/clint/client/ — Vadim Yanitskiy / detail

#279 (Dec 6, 2021, 9:26:09 AM)

  1. jenkins-common.sh: fix redundant titan image build — Oliver Smith / detail
  2. jenkins-common.sh: pull registry.osmocom.org imgs — Oliver Smith / detail

#278 (Dec 3, 2021, 12:41:05 PM)

  1. Revert "osmocom-bb-host-master: install python-enum as fake_trx — Vadim Yanitskiy / detail
  2. ttcn3-msc-test/osmo-msc.cfg: remove deprecated 'periodic location — Vadim Yanitskiy / detail
  3. ttcn3-msc-test/osmo-msc.cfg: disable encryption for UTRAN — Vadim Yanitskiy / detail

#277 (Dec 3, 2021, 11:31:06 AM)

  1. open5gs-latest: fix Dockerfile: remove custom mirror list — Vadim Yanitskiy / detail
  2. Revert "osmo-msc-latest: centos8: add libdbi-dbd-sqlite" — Vadim Yanitskiy / detail

#276 (Dec 1, 2021, 1:56:10 PM)

  1. ttcn3-sccp-test/jenkins.sh: fix typo — Oliver Smith / detail

#275 (Dec 1, 2021, 1:51:05 PM)

  1. ttcn3-{bts,bsc,msc,hlr}-test: set OSMO_SUT_{HOST,PORT} — Vadim Yanitskiy / detail

#274 (Dec 1, 2021, 11:41:09 AM)

  1. debian-stretch-titan/Dockerfile: install osmo-python-tests — Vadim Yanitskiy / detail

#273 (Dec 1, 2021, 10:41:08 AM)

  1. redmine: process changelogs every 10 minutes — Oliver Smith / detail

#272 (Nov 30, 2021, 7:21:10 AM)

  1. ttcn3: write Osmocom repository to configs — Oliver Smith / detail

#271 (Nov 24, 2021, 10:26:07 PM)

  1. Introduce Docker image for osmo-hnodeb-master — Pau Espin Pedrol / detail
  2. Introduce Docker image for ttcn-hnodeb-test — Pau Espin Pedrol / detail

#270 (Nov 23, 2021, 10:51:08 AM)

  1. make/Makefile: allow specifying optional command for 'run' — Vadim Yanitskiy / detail
  2. open5gs-latest: new Dockerfile for latest open5gs from packages — Vadim Yanitskiy / detail

#269 (Nov 19, 2021, 12:46:05 AM)

  1. open5gs-master: there is no 'master' anymore, use 'main' — Vadim Yanitskiy / detail
  2. open5gs-master: add missing dependencies — Vadim Yanitskiy / detail

#268 (Nov 18, 2021, 7:41:08 PM)

  1. ttcn3-stp-test: do not set mp_osmo_stp_newer_than_1_4_0 — Vadim Yanitskiy / detail

#267 (Nov 17, 2021, 10:41:07 AM)

  1. ttcn3-bsc-test: Leave mp_enable_dyn_sdcch8_test enabled in latest — Pau Espin Pedrol / detail
  2. ttcn3-sgsn: latest osmo-sgsn release supports RIM — Pau Espin Pedrol / detail
  3. ttcn3-sip: Don't force mncc version 7 for latest — Pau Espin Pedrol / detail
  4. ttcn3-pcu: Update config for latest after new osmo-pcu release — Pau Espin Pedrol / detail
  5. ttcn3-stp: osmo-stp in master is >1.4.0 now — Pau Espin Pedrol / detail

#266 (Oct 28, 2021, 2:41:05 PM)

  1. ttcn3-sip-test: use MNCCv7 for the '-latest' SUT — Vadim Yanitskiy / detail

#265 (Oct 27, 2021, 5:11:06 PM)

  1. upgrade to redmine 4.1 — laforge / detail
  2. redmine: upgrade to 4.2 — laforge / detail

#264 (Oct 24, 2021, 1:11:07 PM)

  1. upgrade gerrit to 3.2.12 — laforge / detail

#263 (Oct 19, 2021, 6:46:06 PM)

  1. ttcn3-ns-test-fr: fix wrong NS dialect — lynxis / detail
  2. ttcn3-ns-test-fr: set correct ns configuration to match tests — lynxis / detail

#262 (Oct 15, 2021, 4:56:08 PM)

  1. ttcn3-ns-test: add second NSVC to allow TC_tx_blocked_foreign_nsvc to — lynxis / detail

#261 (Sep 14, 2021, 9:16:06 AM)

  1. ttcn3-pcu: use new Neighbor Address Resolution interface in master — Pau Espin Pedrol / detail

#260 (Sep 7, 2021, 6:11:06 PM)

  1. ttcn3-ns-test: add second NSVC to allow SNS tests to work — lynxis / detail
  2. ttcn3-ns-test-sgsn-sns: add test run for ns sgsn role with sns — lynxis / detail

#259 (Aug 20, 2021, 9:21:06 AM)

  1. osmo-mgw.cfg: configure control interface — pmaier@sysmocom.de / detail

#258 (Aug 16, 2021, 9:36:08 AM)

  1. ttcn3-stp-test: rename mp_stp_has_asp_quirk — Oliver Smith / detail

#257 (Aug 12, 2021, 3:46:09 PM)

  1. osmo-mgw: add missing statsd configuration — pmaier@sysmocom.de / detail

#256 (Aug 10, 2021, 10:41:07 AM)

  1. ttcn3-pcu-test: add mp_osmo_pcu_newer_than_0_9_0 — Oliver Smith / detail

#255 (Aug 9, 2021, 9:02:42 AM)

  1. ttcn3-pcap-client-test: set vty port to 4227 — Oliver Smith / detail

#254 (Aug 6, 2021, 2:16:09 PM)

  1. MGCP_Test: set STATSVTY.CTRL_HOSTNAME — laforge / detail

#253 (Jul 28, 2021, 1:46:06 PM)

  1. debian-stretch-titan: Wait for interface to be _up_ not just its — dwillmann / detail

#252 (Jul 22, 2021, 11:01:08 AM)

  1. ttcn3-bsc: Disable dyn TS SDCCH8 tests for latest — Pau Espin Pedrol / detail
  2. ttcn3-bsc: Drop mp_enable_osmux_test — Pau Espin Pedrol / detail

#251 (Jul 19, 2021, 9:01:06 AM)

  1. ttcn3-bts-test: set bind address for the RTP Emulation — Vadim Yanitskiy / detail

#250 (Jul 12, 2021, 8:06:10 AM)

  1. jenkins-common.sh: add NO_LIST_OSMO_PACKAGES — Oliver Smith / detail

#249 (Jul 11, 2021, 5:46:09 PM)

  1. Revert "ttcn3-bsc-test: enable A5/4 support in osmo-bsc.cfg" — Oliver Smith / detail

#248 (Jun 29, 2021, 6:46:07 PM)

  1. jenkins-common.sh: add image_suffix_is_master() — Vadim Yanitskiy / detail
  2. ttcn3-bsc-test: enable A5/4 support in osmo-bsc.cfg — Vadim Yanitskiy / detail

#247 (Jun 28, 2021, 9:06:09 PM)

  1. bts-oml: Set mp_pcu_socket — Pau Espin Pedrol / detail

#246 (Jun 17, 2021, 2:11:08 PM)

  1. Don't run "dpkg --add-architecture i386" on ARM — Oliver Smith / detail

#244 (Jun 7, 2021, 2:32:21 PM)

  1. debian-stretch-jenkins: install libcdk5-dev — Oliver Smith / detail

#243 (Jun 5, 2021, 8:36:08 PM)

  1. add ttcn3-bsc-test-vamos — Neels Hofmeyr / detail

#242 (Jun 4, 2021, 9:51:05 PM)

  1. ttcn3-bts-test/BTS_Tests.cfg: execute VAMOS specific test cases — Vadim Yanitskiy / detail

#241 (May 28, 2021, 4:56:07 PM)

  1. ttcn3-gbproxy-test*: Update gbproxy NS timers — dwillmann / detail

#240 (May 21, 2021, 3:41:07 PM)

  1. jenkins-common.sh: add image_suffix_is_latest — Oliver Smith / detail

#239 (May 21, 2021, 3:36:08 PM)

  1. ttcn3-sgsn-test: fix config sed for latest — Oliver Smith / detail

#238 (May 19, 2021, 11:41:07 AM)

  1. ttcn3-sgsn: Update config to test RIM over GTPCv1 — Pau Espin Pedrol / detail

#237 (May 13, 2021, 8:46:08 PM)

  1. ttcn3-stp-test: Add mp_stp_has_asp_quirk:=false for latest — laforge / detail

#236 (May 12, 2021, 5:41:06 PM)

  1. osmo-gsm-tester: Update srsLTE references to srsRAN — Pau Espin Pedrol / detail

#235 (May 4, 2021, 12:11:08 PM)

  1. jenkins-common.sh: support 2021q1 feed — Oliver Smith / detail

#234 (May 4, 2021, 10:06:06 AM)

  1. centos8-build: use nightly URL to invalidate cache — Oliver Smith / detail
  2. centos8: don't download .repo file — Oliver Smith / detail
  3. make: add OSMOCOM_REPO_PATH — Oliver Smith / detail
  4. make: add OSMOCOM_REPO_TESTSUITE_MIRROR — Oliver Smith / detail
  5. centos8-obs-latest: use OSMOCOM_REPO_VERSION — Oliver Smith / detail
  6. osmo-*-latest: use OSMOCOM_REPO_VERSION — Oliver Smith / detail

#233 (May 3, 2021, 2:21:06 PM)

  1. arm-none-eabi-gcc-4.8.2: install missing packages — Vadim Yanitskiy / detail

#232 (Apr 29, 2021, 1:11:06 PM)

  1. make: add UID as --build-arg — Oliver Smith / detail
  2. debian10-obs-submit: new container — Oliver Smith / detail

#231 (Apr 28, 2021, 5:31:05 PM)

  1. osmo-mgw: Use DSCP value in valid range (<= 63) — laforge / detail

#230 (Apr 27, 2021, 1:36:06 PM)

  1. remove deprecated 'logging level all everything' from configs — laforge / detail

#229 (Apr 25, 2021, 11:21:07 AM)

  1. Add osmo-pcap-master — laforge / detail
  2. Add osmo-pcap-latest — laforge / detail
  3. Add ttcn3-pcap-client-test — laforge / detail

#228 (Apr 14, 2021, 12:46:10 PM)

  1. ttcn3-pcu-sns: add vty parameter to allow ttcn3 to connect — daniel / detail

#227 (Apr 14, 2021, 11:46:10 AM)

  1. osmo-gsm-tester: open5gs deps only for x86_64 — Oliver Smith / detail

#226 (Apr 12, 2021, 1:41:11 PM)

  1. gbproxy: Switch to IP-SNS on the BSS side — laforge / detail

#225 (Apr 12, 2021, 12:16:10 PM)

  1. ogt: Add support to build open5gs — Pau Espin Pedrol / detail

#224 (Apr 12, 2021, 8:11:07 AM)

  1. gbproxy: Add mp_gbproxy_ip to check BVC FSM state — laforge / detail

#223 (Apr 7, 2021, 6:41:08 PM)

  1. docker_images_require: list installed Osmocom pkgs — laforge / detail

#222 (Apr 7, 2021, 4:50:21 PM)

  1. Check in GCC 4.8.2 based cross compiler for ARM EABI target — laforge / detail

#221 (Mar 31, 2021, 8:21:09 AM)

  1. Add ttcn3-ns-test-sns container — laforge / detail
  2. Add ttcn3-ns-test-fr container — laforge / detail

#220 (Mar 30, 2021, 6:36:07 PM)

  1. add osmo-ns-master container with osmo-ns-dummy binary — laforge / detail
  2. Add ttcn3-ns-test container — laforge / detail

#219 (Mar 22, 2021, 11:41:06 AM)

  1. ogt: Update base image to debian buster — Pau Espin Pedrol / detail

#218 (Mar 19, 2021, 7:21:05 AM)

  1. Add debian-buster-jenkins docker setup — laforge / detail

#217 (Mar 18, 2021, 1:41:09 AM)

  1. ttcn3-bts-test: use 'gsmtap-remote-host' parameter — Vadim Yanitskiy / detail
  2. ttcn3-bts-test: use 'gsmtap-sapi enable-all' parameter — Vadim Yanitskiy / detail
  3. ttcn3-bts-test: OML tests ivolve no GSMTAP Um logging — Vadim Yanitskiy / detail

#216 (Mar 16, 2021, 4:26:07 PM)

  1. fr: kill the frnet container before trying to 'rm' it — laforge / detail

#215 (Mar 16, 2021, 3:56:07 PM)

  1. ogt: Drop old arfcn leftovers from resources.conf — Pau Espin Pedrol / detail

#214 (Mar 16, 2021, 3:11:07 PM)

  1. ttcn3-docker-prepare.sh: fix handling of multiple PROJECTs — Vadim Yanitskiy / detail

#213 (Mar 16, 2021, 3:01:07 PM)

  1. ttcn3-fr-test: store execution logs for both containers — Vadim Yanitskiy / detail

#212 (Mar 16, 2021, 10:31:10 AM)

  1. ttcn3-fr-test: add missing TTCN3_PCAP_PATH for '-frnet' container — Vadim Yanitskiy / detail

#211 (Mar 15, 2021, 4:21:06 PM)

  1. ttcn3-sgsn-test/osmo-sgsn.cfg: drop deperecated log categories — Vadim Yanitskiy / detail

#210 (Mar 13, 2021, 9:16:09 AM)

  1. debian-stretch-build: add missing respawn.sh — laforge / detail

#209 (Mar 12, 2021, 11:56:07 AM)

  1. ttcn3-pcu: Disable sending all DATA.ind on pcu -latest — Pau Espin Pedrol / detail

#208 (Mar 11, 2021, 2:11:08 PM)

  1. make/Makefile: use git to get the project's root directory — Vadim Yanitskiy / detail
  2. Make respawn.sh a common part of *-build/-obs images — Vadim Yanitskiy / detail
  3. Share a single instance of Release.key between all images — Vadim Yanitskiy / detail

#207 (Mar 10, 2021, 2:46:09 PM)

  1. debian-stretch-build-dist: use -obs-latest — Oliver Smith / detail

#206 (Mar 10, 2021, 10:56:08 AM)

  1. osmo-msc-latest: centos8: add libdbi-dbd-sqlite — Oliver Smith / detail

#205 (Mar 9, 2021, 1:36:07 PM)

  1. */osmo-bsc.cfg: remove obsolete no-op parameters — Vadim Yanitskiy / detail

#204 (Mar 9, 2021, 12:46:07 PM)

  1. */osmo-bts.cfg: remove obsolete 'uplink-power-target' — Vadim Yanitskiy / detail
  2. fix ttcn3-bsc-test under CentOS: install missing osmo-bts-omldummy — Vadim Yanitskiy / detail

#203 (Mar 9, 2021, 10:36:06 AM)

  1. debian-stretch-jenkins: install osmo-trx depends — Oliver Smith / detail
  2. osmo-remsim-master/Dockerfile: add missing libcsv-devel dependency — Vadim Yanitskiy / detail

#202 (Mar 8, 2021, 7:36:07 PM)

  1. Revert "ttcn3-pcu: Disable sending all DATA.ind on pcu -latest" — Pau Espin Pedrol / detail

#201 (Mar 8, 2021, 9:36:08 AM)

  1. ttcn3-pcu: Disable sending all DATA.ind on pcu -latest — Pau Espin Pedrol / detail

#200 (Mar 8, 2021, 8:36:07 AM)

  1. debian-stretch-obs-latest: new container — Oliver Smith / detail
  2. osmo-*-latest: support centos8 — Oliver Smith / detail
  3. osmo-*-master: move common code to *-build — Oliver Smith / detail

#199 (Mar 5, 2021, 4:01:06 PM)

  1. osmo-ggsn-latest: add more kernel build depends — Oliver Smith / detail
  2. osmo-msc-latest: implicit libdbd-sqlite3 install — Oliver Smith / detail

#198 (Mar 2, 2021, 12:21:10 PM)

  1. Add osmo-gbproxy-latest container — laforge / detail

#197 (Mar 2, 2021, 11:21:10 AM)

  1. add osmo-smlc-latest container — laforge / detail

#196 (Mar 1, 2021, 12:31:10 PM)

  1. kernel-test: verify REMOTE_NAME and URL — Oliver Smith / detail
  2. README.md: describe OSMO_*_BRANCH — Oliver Smith / detail

#195 (Feb 28, 2021, 10:21:09 AM)

  1. ttcn3-cbc-test: fix copy+paste error regarding osmo-stp.cfg — laforge / detail

#194 (Feb 26, 2021, 4:21:06 PM)

  1. kernel-test: don't try to use KVM if not available — Oliver Smith / detail

#193 (Feb 26, 2021, 3:36:05 PM)

  1. Get rid of uneeded param StatsD_Checker.mp_enable_stats — Pau Espin Pedrol / detail
  2. ttcn3-bsc: Get rid of uneeded param BSC_Tests.mp_media_mgw_offer_ipv6 — Pau Espin Pedrol / detail
  3. bts-test: Drop uneeded module param RSL_Emulation.mp_rslem_patch_ipa_cid — Pau Espin Pedrol / detail
  4. ttcn3-hlr: Drop uneeded module param HLR_Tests.mp_hlr_supports_dgsm — Pau Espin Pedrol / detail
  5. ttcn3-msc: Drop uneeded module params — Pau Espin Pedrol / detail
  6. ttcn3-sip: Drop uneeded module param MNCC_Emulation.mp_mncc_version — Pau Espin Pedrol / detail

#192 (Feb 26, 2021, 8:36:08 AM)

  1. jenkins-common.sh: add common clean up trap — Oliver Smith / detail
  2. */jenkins.sh: set -e after setting clean up trap — Oliver Smith / detail
  3. jenkins-common: put fix_perms() in clean_up_common — Oliver Smith / detail
  4. osmo-ggsn-master: add configure --enable-gtp-linux — Oliver Smith / detail
  5. ttcn3-ggsn-test: add kernel test — Oliver Smith / detail

#191 (Feb 25, 2021, 4:51:06 PM)

  1. Remove test backward compatibility with older osmo-* versions — Pau Espin Pedrol / detail

#190 (Feb 23, 2021, 7:56:06 PM)

  1. add osmo-cbc-latest container — laforge / detail

#189 (Feb 22, 2021, 1:46:10 PM)

  1. cbc: Add osmo-cbc-master container — laforge / detail
  2. cbc: New ttcn3-cbc-test container — laforge / detail

#188 (Feb 19, 2021, 5:16:05 PM)

  1. gbproxy: update sns configuration to use ip-sns-bind — lynxis / detail

#187 (Feb 16, 2021, 5:41:09 PM)

  1. ttcn3-gbproxy-test: remove broken merge logs cmd — laforge / detail

#186 (Feb 15, 2021, 11:31:08 AM)

  1. gerrit: update to 3.2.7 for security reasons — laforge / detail

#185 (Feb 15, 2021, 7:11:07 AM)

  1. Revert "RFC: allow to set configuration and/or specific testcases" — Oliver Smith / detail

#184 (Feb 12, 2021, 3:01:09 PM)

  1. ttcn3: use REGISTRY arg with debian-stretch-titan — Oliver Smith / detail

#183 (Feb 11, 2021, 3:11:08 PM)

  1. ttcn3: remove /root/projects/git symlink — Oliver Smith / detail
  2. ttcn3: move initial clone to debian-stretch-titan — Oliver Smith / detail
  3. debian-stretch-titan: update deps on change — Oliver Smith / detail
  4. ttcn3: move prepare code to shared script — Oliver Smith / detail
  5. debian-stretch-titan: prepare: run 'make deps' — Oliver Smith / detail
  6. debian-stretch-titan: prepare: start/stop links — Oliver Smith / detail
  7. ttcn3: move shared run code to script — Oliver Smith / detail
  8. ttcn3-{fr,gbproxy}-test: use ttcn3-docker-run too — Oliver Smith / detail

#182 (Feb 11, 2021, 11:56:07 AM)

  1. osmo-sip-master: Don't install packages not required — laforge / detail

#181 (Feb 10, 2021, 4:01:08 PM)

  1. redmine: Make changeset keywords work with OS# annotation — laforge / detail

#180 (Feb 10, 2021, 1:11:07 PM)

  1. gbproxy: Fix ip-sns VTY config — dwillmann / detail

#179 (Feb 4, 2021, 8:51:07 PM)

  1. Add osmo-gbproxy-* container for osmo-gbproxy — dwillmann / detail

#178 (Feb 4, 2021, 2:13:19 PM)

  1. ttcn3-fr-tests: Configure MTU to 1700 — laforge / detail

#177 (Feb 4, 2021, 9:41:08 AM)

  1. ttcn3-fr-tests: Disable junit-xml generation for FRNET_Tests — laforge / detail

#176 (Feb 3, 2021, 9:26:09 PM)

  1. New ttcn3-fr-test container — laforge / detail

#175 (Feb 1, 2021, 1:46:07 PM)

  1. osmo-pcu-master/Dockerfile: add missing libosmoctrl dependency — Vadim Yanitskiy / detail

#174 (Feb 1, 2021, 11:26:06 AM)

  1. ttcn3-pcu: Update configs to support NACC tests — Pau Espin Pedrol / detail

#173 (Jan 28, 2021, 9:26:07 PM)

  1. sgsn: change configuration to the new NS2 — lynxis / detail

#172 (Jan 25, 2021, 12:51:07 PM)

  1. ttcn3-gbproxy-test: s/sgsn/gbproxy/ — laforge / detail

#171 (Jan 25, 2021, 9:26:06 AM)

  1. debian-repo-install-test: remove Release.key — Oliver Smith / detail
  2. rename {debian => debian9}-repo-install-test — Oliver Smith / detail
  3. debian10-repo-install-test: new container — Oliver Smith / detail

#170 (Jan 25, 2021, 8:56:06 AM)

  1. ttcn3-pcu-test-sns: Fix syntax errors in config file of previous commit — laforge / detail

#169 (Jan 24, 2021, 3:16:08 PM)

  1. ttcn3-pcu-test-sns: fix DTE 'Encoding an unbound integer value' — Vadim Yanitskiy / detail

#168 (Jan 21, 2021, 7:56:08 PM)

  1. osmo-gbproxy: fix configuration — laforge / detail

#167 (Jan 21, 2021, 9:46:06 AM)

  1. gbproxy,pcu,sgsn: Update config files — laforge / detail
  2. gbproxy: Use separate NS-VC for data + signaling — laforge / detail

#166 (Jan 19, 2021, 3:46:06 PM)

  1. ttcn3-pcu-test/sns: add configuration for 2nd and 3rd nsvc — lynxis / detail

#165 (Jan 17, 2021, 6:31:10 PM)

  1. gbproxy: Update configs for SGSN poool with 2 SGSN, NRI, ... — laforge / detail

#164 (Jan 13, 2021, 3:01:08 PM)

  1. fpga-build: add osmo-ci — Oliver Smith / detail
  2. debian-stretch-jenkins,fpga-build: add gsm-manuals — Oliver Smith / detail
  3. Cosmetic: debian-stretch-jenkins, osmo-gsm-tester: fix indent — Oliver Smith / detail
  4. fpga-build: don't write path to /etc/environment — Oliver Smith / detail

#163 (Jan 12, 2021, 6:06:09 PM)

  1. ttcn3-gbproxy-test-fr: fix SNS ip address — lynxis / detail
  2. make osmo-gbproxy.cfg in ttcn3-gbproxy and ttcn3-gbproxy-fr to look — lynxis / detail

#162 (Jan 12, 2021, 8:31:07 AM)

  1. debian-stretch-jenkins, osmo-gsm-tester: add osmo-ci — laforge / detail

#161 (Jan 12, 2021, 8:26:07 AM)

  1. gbproxy-fr: Enable IP-SNS towards SGSN — lynxis / detail

#160 (Jan 11, 2021, 12:26:08 PM)

  1. gbproxy: Enable IP-SNS towards SGSN — dwillmann / detail

#159 (Jan 11, 2021, 3:36:06 AM)

  1. ttcn3-gbproxy-test: Fix pcap capture with dumpcap — dwillmann / detail

#158 (Jan 5, 2021, 6:01:10 PM)

  1. ttcn3-gbproxy-test: Fix osmo-gbproxy config — dwillmann / detail

#157 (Dec 29, 2020, 11:21:10 PM)

  1. osmo-gbproxy: Change config file to comply with change in upstream — laforge / detail

#156 (Dec 18, 2020, 11:46:09 AM)

  1. Introduce osmo-ran docker image set up — laforge / detail

#155 (Dec 17, 2020, 4:16:07 PM)

  1. fpga-build: install missing toosls required for 'publish' and manuals — laforge / detail

#154 (Dec 17, 2020, 3:36:37 PM)

  1. fpga-build: Make sure PATH is also set for non-root users — laforge / detail

#153 (Dec 17, 2020, 2:41:07 PM)

  1. fpga-build: Add packages required for rendering manuals — laforge / detail
  2. fpga-build: Create 'build' user like in 'debian-stretch-jenkins' — laforge / detail

#152 (Dec 16, 2020, 2:11:07 PM)

  1. ttcn3-bts-test: fix: sleep 1 second before respawning the IUT — Vadim Yanitskiy / detail

#151 (Dec 16, 2020, 10:01:06 AM)

  1. migrate from CentOS_8_Stream to CentOS_8 — laforge / detail
  2. centos8-build: Make 'make' work again — laforge / detail
  3. fpga-build: Make riscv + fpga toolchain version configurable — laforge / detail

#150 (Dec 11, 2020, 5:16:10 PM)

  1. gbproxy-test-fr: Avoid dumpcap failing to write to /data — laforge / detail

#149 (Dec 11, 2020, 3:31:09 PM)

  1. debian-stretch-titan: Add wireshark-common for dumpcap — laforge / detail

#148 (Dec 11, 2020, 2:51:09 PM)

  1. ttcn3-gbproxy-test: Use dumpcap instead of tcpdump — laforge / detail

#147 (Dec 11, 2020, 11:21:08 AM)

  1. ttcn3-gbproxy-test-fr: depend also on osmo-sgsn-master — laforge / detail

#146 (Dec 10, 2020, 3:21:10 PM)

  1. debian-stretch-titan: use dpkg to install libfftranscode — daniel / detail

#145 (Dec 9, 2020, 6:31:08 PM)

  1. ttcn3-gbproxy-test-fr: Fix hdlcnet device names — laforge / detail

#144 (Dec 9, 2020, 4:42:30 PM)

  1. centos8-build: Use arg OSMOCOM_REPO_MIRROR — laforge / detail

#143 (Dec 9, 2020, 4:11:48 PM)

  1. centos8-repo-install-test: Upstream requires 'powertools' not — laforge / detail

#142 (Dec 9, 2020, 11:11:06 AM)

  1. gbproxy-test-fr: Fix syntax error in config file — laforge / detail

#141 (Dec 9, 2020, 10:16:06 AM)

  1. centos8-build: Upstream requires 'powertools' not 'PowerTools' — laforge / detail

#140 (Dec 8, 2020, 9:41:10 AM)

  1. gbproxy: Enable test of load-sharing when running over FR — laforge / detail

#139 (Dec 8, 2020, 7:41:09 AM)

  1. gbproxy: update ttcn3 configuration to reflect osmo-gbproxy.cfg — laforge / detail

#138 (Dec 7, 2020, 1:38:01 PM)

  1. Rename centos-repo-install-test/Dockerfile to centos8 — Pau Espin Pedrol / detail

#137 (Dec 7, 2020, 1:11:09 PM)

  1. ttcn3-gbproxy-test-fr: Catch up with config changes — dwillmann / detail

#136 (Dec 2, 2020, 9:12:27 PM)

  1. common: Introduce OSMOCOM_REPO_MIRROR param — Pau Espin Pedrol / detail

#135 (Dec 1, 2020, 11:53:19 AM)

  1. common: Automatize UPSTREAM_DISTRO name based on image name — laforge / detail

#134 (Nov 30, 2020, 8:51:07 PM)

  1. osmo-gbproxy-master (derived from osmo-sgsn-master) — laforge / detail
  2. Add ttcn3-gbproxy-test-fr for FR related testing — laforge / detail

#133 (Nov 17, 2020, 10:21:14 AM)

  1. debian-stretch-titan: use libfftranscode 0.3 (latest version) — laforge / detail
  2. debian-stretch-titan: Use correct architecture of libfftranscode — laforge / detail

#132 (Nov 13, 2020, 8:26:05 AM)

  1. NS_Configuration: Adjust config regarding support for NS-VCG — laforge / detail

#131 (Nov 11, 2020, 10:01:08 PM)

  1. ogt: Install dependency python3-watchdog — Pau Espin Pedrol / detail

#130 (Nov 2, 2020, 4:36:52 PM)

  1. introduce 'REGISTRY' argument to all Dockerfiles — laforge / detail

#129 (Oct 25, 2020, 10:51:10 AM)

  1. osmo-mgw-master: Add missing libosmo-abis dependency on CentOS — laforge / detail

#128 (Oct 21, 2020, 12:36:07 PM)

  1. ogt: Create grbroker target directory — Pau Espin Pedrol / detail

#127 (Oct 21, 2020, 11:56:07 AM)

  1. ttcn3-bts: Enable gsmtap sapi for tch in osmo-bts.cfg — laforge / detail

#126 (Oct 20, 2020, 10:51:05 PM)

  1. fix ttcn3-smlc-test/Dockerfile — Neels Hofmeyr / detail

#125 (Oct 19, 2020, 3:03:00 PM)

  1. gbproxy: Fix docker config for SGSN NS port — laforge / detail

#124 (Oct 16, 2020, 5:01:06 PM)

  1. osmo-gsm-tester: Install gnuradio dependency — Pau Espin Pedrol / detail

#123 (Oct 16, 2020, 1:56:08 PM)

  1. bsc: add missing 'smlc / enable' for LCS tests — Neels Hofmeyr / detail

#122 (Oct 16, 2020, 12:56:08 PM)

  1. osmo-*-master: Invalidate docker cache when CentOS repo changes — laforge / detail

#121 (Oct 16, 2020, 1:08:17 AM)

  1. osmo-sgsn-*: Expose ports for gbproxy as well — dwillmann / detail
  2. Add GBProxy_Test — dwillmann / detail

#120 (Oct 15, 2020, 10:11:09 AM)

  1. osmo-pcu-test: Only handle SNS where we test IP-SNS — dwillmann / detail

#119 (Oct 15, 2020, 5:56:08 AM)

  1. bsc: enable LCS tests for normal bsc master tests — Neels Hofmeyr / detail

#118 (Oct 15, 2020, 4:11:07 AM)

  1. add osmo-smlc-master — Neels Hofmeyr / detail
  2. add ttcn3-smlc-test — Neels Hofmeyr / detail

#117 (Oct 15, 2020, 2:56:07 AM)

  1. bsc: enable Lb routing between BSC <-> virtual SMLC — Neels Hofmeyr / detail

#116 (Oct 15, 2020, 2:16:07 AM)

  1. bsc: add mp_enable_lcs_tests := false — Neels Hofmeyr / detail

#115 (Oct 9, 2020, 10:31:09 AM)

  1. ttcn3-pcu-test: fix latest: tolerate CellId IE in BVC-RESET for BVCO=0 — Vadim Yanitskiy / detail

#114 (Oct 6, 2020, 2:06:05 PM)

  1. ogt: Update installed patchelf to required version 0.11 — Pau Espin Pedrol / detail

#113 (Oct 3, 2020, 2:06:07 PM)

  1. gerrit: upgrade to 3.2.3 — laforge / detail

#112 (Oct 3, 2020, 2:01:07 PM)

  1. gerrit: upgrade to 2.16.22 — laforge / detail

#111 (Oct 3, 2020, 11:16:08 AM)

  1. cgit: osmo-commit-filter.py: migrate from deprecated cgi.escape to — laforge / detail
  2. cgit: Don't depend on unmaintained upstream; work directly with debian — laforge / detail
  3. cgit: Increase fastcgi timeout from default 60s to 120s — laforge / detail

#110 (Sep 29, 2020, 10:41:08 PM)

  1. BSC_Tests: disable IPV6 parameter mp_media_mgw_offer_ipv6 for latest — pmaier@sysmocom.de / detail

#109 (Sep 28, 2020, 2:16:08 PM)

  1. PCU+SGSN: Adjust to new "provider" structure of NSConfiguration — laforge / detail

#108 (Sep 25, 2020, 1:01:06 PM)

  1. ttcn3-pcu-test: Change config to support statsd — dwillmann / detail

#107 (Sep 22, 2020, 6:42:47 AM)

  1. ttcn3-pcu-test-sns: use PCUIFv9 for 'latest' images — Vadim Yanitskiy / detail

#106 (Sep 21, 2020, 7:06:06 PM)

  1. ttcn3-{pcu,bts}-test: use PCUIFv9 for 'latest' images — Vadim Yanitskiy / detail

#105 (Sep 21, 2020, 6:41:45 AM)

  1. PCU+SGSN tests: Set address_family field of NSConfiguration — laforge / detail

#104 (Sep 18, 2020, 8:40:11 AM)

  1. ttcn3-bsc: Set new BSC_Tests_CBSP module parameters — laforge / detail

#103 (Sep 16, 2020, 10:41:08 AM)

  1. ttcn3-sip: Update default mp_mncc_version — Pau Espin Pedrol / detail
  2. ttcn3-msc: Force MNCCv6 on ttcn3-msc-test-latest — Pau Espin Pedrol / detail

#102 (Sep 15, 2020, 8:56:09 PM)

  1. ttcn3-msc: Update module params against new osmo-ttcn3-hacks.git — laforge / detail

#101 (Sep 15, 2020, 8:51:09 PM)

  1. New fpga-build image for building iCE40 gateware + RISC-V firmware — laforge / detail

#100 (Sep 14, 2020, 9:14:37 AM)

  1. ttcn3-bts-test/fh: do not configure CBCH slots statically — Vadim Yanitskiy / detail

#99 (Sep 9, 2020, 1:56:05 PM)

  1. ttcn3-mgw: Update module param addresses naming to support ipv6 — Pau Espin Pedrol / detail

#98 (Sep 2, 2020, 10:26:08 AM)

  1. ttcn3-bsc-sccplite: Bind osmo-bsc SS7 instance to container's local — Pau Espin Pedrol / detail

#97 (Aug 30, 2020, 4:21:49 PM)

  1. ttcn3-msc: Enable osmo-msc SS7 multi-homing and IPv6 features in tests — laforge / detail
  2. ttcn3-sgsn: Enable osmo-sgsn SS7 multi-homing and IPv6 features in tests — laforge / detail

#96 (Aug 30, 2020, 2:16:06 PM)

  1. ttcn3-bsc: Enable osmo-bsc SS7 multi-homing and IPv6 features in tests — laforge / detail

#95 (Aug 29, 2020, 8:06:39 AM)

  1. bsc CBSP: apply new cbc config — Neels Hofmeyr / detail

#94 (Aug 27, 2020, 3:04:56 PM)

  1. jenkins-common.sh: Add function to print docker network related — Pau Espin Pedrol / detail

#93 (Aug 27, 2020, 10:51:06 AM)

  1. ttcn3-stp: Configure M3UA setup to use IPv6 together with IPv4 — laforge / detail

#92 (Aug 25, 2020, 12:16:10 PM)

  1. ttcn3-mgw-test: Removing the e1 config options on latest — dwillmann / detail

#91 (Aug 19, 2020, 7:31:10 AM)

  1. msc: Disable expecting CommonID when testing 'latest' — laforge / detail

#90 (Aug 19, 2020, 7:16:10 AM)

  1. osmo-mgw.cfg: fix config file + add E1 trunk — pmaier@sysmocom.de / detail

#89 (Aug 17, 2020, 8:36:09 AM)

  1. debian-stretch-jenkins: install osmo-python-tests for python2 — lynxis / detail

#88 (Aug 16, 2020, 12:56:10 PM)

  1. ttcn3-ggsn-test: Add static IPv6 addresses to containers — laforge / detail
  2. ttcn3-ggsn-test: Use IPv6 address of the tester as "DNS1" — laforge / detail

#87 (Aug 14, 2020, 6:30:36 AM)

  1. migrate ttcn3-msc-test from 172.18.1.0/24 to 172.18.20.0/24 — laforge / detail

#86 (Aug 13, 2020, 9:26:09 PM)

  1. Update bsc tester config to enable stats testing — dwillmann / detail

#85 (Aug 13, 2020, 7:31:09 PM)

  1. ttcn3-bts-test/jenkins.sh: do not create unused directory — laforge / detail
  2. ttcn3-bts-test/jenkins.sh: use bts-tester-{generic,oml,virtphy,hopping} — laforge / detail
  3. ttcn3-bts-test/fh: fix: properly include BTS_Tests.cfg — laforge / detail
  4. ttcn3-bts-test/fh: fix: do not run BTS_Tests.control twice — laforge / detail
  5. ttcn3-bts-test/fh: fix: properly rename classnames — laforge / detail

#84 (Aug 13, 2020, 3:20:43 PM)

  1. Enable IPv6 in docker networking — laforge / detail

#83 (Aug 13, 2020, 1:16:08 PM)

  1. bsc-sccplite CBSP: fix osmo-bsc.cfg to contain 3 BTS with a CBCH — Neels Hofmeyr / detail

#82 (Aug 13, 2020, 5:46:05 AM)

  1. bsc CBSP: fix osmo-bsc.cfg to contain 3 BTS with a CBCH — Neels Hofmeyr / detail

#81 (Aug 12, 2020, 6:36:08 PM)

  1. jenkins-common.sh: exit early on full disk — laforge / detail

#80 (Aug 11, 2020, 7:06:06 AM)

  1. ttcn3-bts-test/jenkins.sh: enable frequency hopping test cases — Vadim Yanitskiy / detail

#79 (Jul 31, 2020, 7:01:05 AM)

  1. ttcn3-bts-test/osmo-bsc.cfg: do not enable CBCH slots by default — Vadim Yanitskiy / detail

#78 (Jul 21, 2020, 7:51:08 PM)

  1. ttcn3-bts-test/osmo-bsc.cfg: change pchan config for TRX#1..3 — Vadim Yanitskiy / detail
  2. ttcn3-bts-test: add configuration with frequency hopping parameters — Vadim Yanitskiy / detail

#77 (Jul 14, 2020, 10:47:13 AM)

  1. make: use $(nproc) instead of hard-coded number of cores — Vadim Yanitskiy / detail

#76 (Jul 8, 2020, 12:41:07 PM)

  1. ttcn3-bts: Fix most OML test failing after osmo-bts shutdown — Pau Espin Pedrol / detail

#75 (Jul 8, 2020, 1:46:10 AM)

  1. ttcn3-msc-test latest: do not require VLR cell id match in latest build — Neels Hofmeyr / detail

#74 (Jul 6, 2020, 7:46:10 PM)

  1. ttcn3-bts-test/osmo-bts.cfg: use logging level 'notice' by default — Vadim Yanitskiy / detail
  2. ttcn3-bts-test/osmo-bsc.cfg: use logging level 'notice' by default — Vadim Yanitskiy / detail

#73 (Jul 1, 2020, 4:23:05 PM)

  1. Makefile: Support overriding LIBOSMOCORE_BRANCH — Pau Espin Pedrol / detail

#72 (Jun 25, 2020, 9:46:07 PM)

  1. bsc: Store osmo-bts-omldummy logs out of docker container — Pau Espin Pedrol / detail

#71 (Jun 24, 2020, 6:41:07 PM)

  1. ttcn3-bsc-test latest: remove MSC pooling specific bits in latest build — Neels Hofmeyr / detail

#70 (Jun 22, 2020, 4:20:54 PM)

  1. MSC_Tests.cfg: tweak comments — Neels Hofmeyr / detail

#69 (Jun 22, 2020, 1:29:27 PM)

  1. ttcn3-bts-test/BTS_Tests.cfg: configure number of transceivers — Vadim Yanitskiy / detail

#68 (Jun 21, 2020, 9:01:09 PM)

  1. collect core dumps: '--ulimit core=-1' and WORKDIR=/data everywhere — laforge / detail

#67 (Jun 20, 2020, 8:06:10 PM)

  1. bsc.cfg: SCCPlite = AoIP: adjust logging config — Neels Hofmeyr / detail

#66 (Jun 20, 2020, 4:46:06 PM)

  1. attempt to capture core dump from osmo-stp during ttcn3-bsc-test run — Neels Hofmeyr / detail

#65 (Jun 20, 2020, 2:11:05 PM)

  1. bsc: adjust osmo-bsc.cfg for MSC pooling tests — Neels Hofmeyr / detail

#64 (Jun 16, 2020, 10:01:08 AM)

  1. bsc.cfg: SCCPlite = AoIP: adjust handover config — Neels Hofmeyr / detail
  2. bsc.cfg: SCCPlite = AoIP: adjust si2quater config — Neels Hofmeyr / detail

#63 (Jun 15, 2020, 10:56:10 PM)

  1. BSC_Tests.cfg for SCCPlite: adjust cfg for multiple MSCs — Neels Hofmeyr / detail

#62 (Jun 14, 2020, 11:21:43 AM)

  1. BSC_Tests.cfg: adjust cfg for multiple MSCs — Neels Hofmeyr / detail

#61 (Jun 12, 2020, 2:56:06 PM)

  1. debian-stretch-jenkins/Dockerfile: Install source-highlight — laforge / detail

#60 (Jun 11, 2020, 3:21:05 PM)

  1. osmo-gsm-tester: Update resources.conf syntax changes — Pau Espin Pedrol / detail

#59 (Jun 9, 2020, 2:31:07 PM)

  1. ttcn3-bts-test/jenkins.sh: fix latest: enable IPA stream ID patching — Vadim Yanitskiy / detail

#58 (Jun 9, 2020, 10:56:07 AM)

  1. ttcn3-bts: Update cfg for test TC_tx_power_start_ramp_up_bcch — Pau Espin Pedrol / detail

#57 (Jun 7, 2020, 8:51:18 PM)

  1. ttcn3-bts-test/jenkins.sh: fix: properly start virtphy — Vadim Yanitskiy / detail

#56 (Jun 7, 2020, 7:31:05 PM)

  1. ttcn3-bts: jenkins.sh: Log fake_trx stdout to file — laforge / detail

#55 (Jun 5, 2020, 4:26:37 PM)

  1. debian-stretch-titan: do not install unneeded dependencies — Vadim Yanitskiy / detail

#54 (Jun 2, 2020, 12:06:10 PM)

  1. ttcn3-msc-test: fix osmo-msc.cfg: make it work with latest — Vadim Yanitskiy / detail

#53 (May 31, 2020, 6:46:09 PM)

  1. osmo-{bsc,msc}.cfg: eliminate 'periodic location update 30' — Vadim Yanitskiy / detail

#52 (May 30, 2020, 9:41:10 AM)

  1. centos8-build: new image — Oliver Smith / detail
  2. docker_images_require: scope of i: local — Oliver Smith / detail
  3. docker_images_require: build depends too — Oliver Smith / detail
  4. ttcn3-*-test: remove implicit dependencies — Oliver Smith / detail
  5. make/Makefile: add DISTRO argument — Oliver Smith / detail
  6. jenkins-common.sh: support osmo-*-centos8 images — Oliver Smith / detail
  7. osmo-*-master: support centos8 — Oliver Smith / detail

#51 (May 29, 2020, 2:06:05 PM)

  1. osmo-bsc.cfg: drop deprecated '11bit_rach_support_for_egprs' — Vadim Yanitskiy / detail

#50 (May 29, 2020, 12:21:10 PM)

  1. osmo-bsc.cfg: drop non-existing 'access-list-name bsc-list' — Vadim Yanitskiy / detail
  2. osmo-bsc.cfg: drop deprecated 'ip.access rtp-base' parameter — Vadim Yanitskiy / detail

#49 (May 28, 2020, 10:41:59 AM)

  1. ttcn3-bts-test: enable 3 additional transceivers for BTS#0 — Vadim Yanitskiy / detail

#48 (May 28, 2020, 9:56:10 AM)

  1. debian-repo-install-test: move scripts to osmo-ci — Oliver Smith / detail

#47 (May 28, 2020, 9:31:52 AM)

  1. centos-repo-install-test: new image — Oliver Smith / detail

#46 (May 19, 2020, 8:25:32 PM)

  1. bsc: drop access-list-name from osmo-bsc.cfg — Neels Hofmeyr / detail

#45 (May 16, 2020, 8:26:45 PM)

  1. ttcn3-hlr-tests: enable DGSM tests — Oliver Smith / detail

#44 (May 13, 2020, 4:41:06 PM)

  1. bsc/osmo-bsc.cfg: remove legacy 'rtp-base' config — Neels Hofmeyr / detail

#43 (May 12, 2020, 2:46:07 PM)

  1. osmo-gsm-tester: Fix typo in path in jenkins.sh — Pau Espin Pedrol / detail

#42 (May 12, 2020, 1:01:36 PM)

  1. osmo-gsm-tester: Point config parameter to file instead of its dirname — Pau Espin Pedrol / detail

#41 (May 8, 2020, 6:06:09 PM)

  1. cgit: change URL for gerrit change-ids — laforge / detail

#40 (May 7, 2020, 5:26:09 PM)

  1. osmo-gsm-tester: Pass conf dir through -c cmd line arg instead of env — Pau Espin Pedrol / detail

#39 (May 6, 2020, 6:31:31 AM)

  1. ttcn3-*-test/jenkins*.sh: add $DOCKER_ARGS — Oliver Smith / detail

#38 (May 5, 2020, 7:36:06 PM)

  1. osmo-hlr-master: run ldconfig — Oliver Smith / detail

#37 (May 4, 2020, 11:43:55 AM)

  1. gerrit: Update to 2.16.18 — laforge / detail

#36 (Apr 30, 2020, 11:16:09 AM)

  1. ttcn3-pcu: Fix cfgn content after ttcn3 module renaming — Pau Espin Pedrol / detail

#35 (Apr 29, 2020, 9:23:12 AM)

  1. open5gs: Add pgw.sh — laforge / detail

#34 (Apr 27, 2020, 7:41:06 AM)

  1. add osmo-uecups-master container — laforge / detail
  2. add open5gs-master docker container — laforge / detail

#33 (Apr 17, 2020, 1:26:08 PM)

  1. debian-stretch-jenkins: Add osmo-uecups dependencies — laforge / detail

#32 (Apr 14, 2020, 6:01:06 PM)

  1. ttcn3-bts-test: enable time / date logging for fake_trx.py — Vadim Yanitskiy / detail

#31 (Apr 11, 2020, 3:41:10 PM)

  1. osmo-gsm-tester: Update path to sysmocom's specific setup — Pau Espin Pedrol / detail

#30 (Apr 7, 2020, 11:31:09 AM)

  1. ttcn3-bts-test/virtphy: remove deprecated 'ms-power-control dsp' — Vadim Yanitskiy / detail

#29 (Apr 4, 2020, 6:16:07 PM)

  1. osmo-bsc-{latest,master}/osmo-bsc.cfg: Remove 'nat' from logging — Vadim Yanitskiy / detail

#28 (Apr 4, 2020, 5:11:07 PM)

  1. ttcn3-bts-test/osmo-bsc.cfg: Remove 'nat' from logging — Vadim Yanitskiy / detail

#27 (Apr 4, 2020, 5:06:07 PM)

  1. ttcn3-bsc-test: Remove 'nat' from logging — laforge / detail

#26 (Apr 3, 2020, 6:56:08 PM)

  1. osmo-gsm-tester/resources.conf: Add 2g,4g modem features attr — Pau Espin Pedrol / detail

#25 (Apr 1, 2020, 11:21:10 AM)

  1. osmo-gsm-tester: Require debian-stretch-jenkins as Dockerfile suggests — Pau Espin Pedrol / detail

#24 (Mar 30, 2020, 6:06:06 PM)

  1. ttcn3-bsc-test: Enable CBSP tests — laforge / detail

#23 (Mar 30, 2020, 4:25:13 PM)

  1. update OBS Release.key; the old one expired today. — laforge / detail

#22 (Mar 20, 2020, 6:31:08 PM)

  1. osmo-gsm-tester: Use non 'inst' name as target install dir, and remove — Pau Espin Pedrol / detail
  2. osmo-gsm-tester: Allow changing host's trial directory — Pau Espin Pedrol / detail
  3. osmo-gsm-tester: Print colored run output succes/failure — Pau Espin Pedrol / detail

#21 (Mar 20, 2020, 4:21:37 PM)

  1. osmo-gsm-tester: Build srsLTE inside the docker instance if inst not — Pau Espin Pedrol / detail

#20 (Mar 12, 2020, 3:56:08 PM)

  1. osmo-gsm-tester: Base docker image on debian-stretch-jenkins — Pau Espin Pedrol / detail

#19 (Mar 12, 2020, 3:51:08 PM)

  1. osmo-gsm-tester: Allow setting rtprio inside the container — Pau Espin Pedrol / detail
  2. osmo-gsm-tester: Allow passing osmo-gsm-tester params from jenkins.sh — Pau Espin Pedrol / detail

#18 (Mar 12, 2020, 9:36:07 AM)

  1. remsim: Enable "classic" client tests (client in separate container) — laforge / detail

#17 (Mar 11, 2020, 9:06:56 AM)

  1. osmo-remism-latest: Actually use 'latest', not 'nightly' feed — laforge / detail

#16 (Mar 9, 2020, 4:51:35 PM)

  1. debian-stretch-jenkins: Install libulfius from osmocom OBS repos — Pau Espin Pedrol / detail

#15 (Mar 3, 2020, 9:21:10 AM)

  1. osmo-gsm-tester: new versions require python3-numpy — Pau Espin Pedrol / detail
  2. osmo-gsm-tester: Add missing srsLTE dependencies (soapy) — Pau Espin Pedrol / detail
  3. osmo-gsm-tester: Improvements anv fixes to run 4G network with latest — Pau Espin Pedrol / detail
  4. osmo-gsm-tester: Copy limits.d files to docker image — Pau Espin Pedrol / detail

#14 (Mar 1, 2020, 7:26:08 PM)

  1. Introduce osmo-gsm-tester docker setup — laforge / detail

#13 (Feb 18, 2020, 8:26:07 AM)

  1. osmo-remsim-master: Add vpcd + pcscd to Docker image — laforge / detail
  2. remsim: Integrate pcscd+ifd-vpcd for bankd tests — laforge / detail

#12 (Feb 16, 2020, 9:51:07 AM)

  1. update gerrit to 2.16.16 — laforge / detail
  2. redmine: We no longer need the hmac diff — laforge / detail

#11 (Feb 10, 2020, 7:31:10 AM)

  1. ttcn3-hlr-test: mp_hlr_supports_dgsm := false — Oliver Smith / detail

#10 (Feb 10, 2020, 7:26:10 AM)

  1. ttcn3-hlr-test: set mp_hlr_supports_dgsm — Oliver Smith / detail

#9 (Jan 21, 2020, 1:06:08 PM)

  1. sccp: Enable gsmtap log target and configure stderr logging — Pau Espin Pedrol / detail
  2. stp-master/Dockerfile: Install sccp_devmo_user bin instead of libtool — Pau Espin Pedrol / detail

#8 (Jan 20, 2020, 2:56:09 PM)

  1. ttcn3-pcu: Bind VTY to assigned IP addr — Pau Espin Pedrol / detail

#7 (Jan 17, 2020, 9:11:08 PM)

  1. Introduce ttcn-sccp dockerized setup — Pau Espin Pedrol / detail

#6 (Jan 16, 2020, 8:31:07 PM)

  1. ttcn3-stp: Set default OSMO_TTCN3_BRANCH to master — Pau Espin Pedrol / detail
  2. README.md: Document how to get gdb backtrace from process crash — Pau Espin Pedrol / detail

#5 (Jan 15, 2020, 12:56:08 PM)

  1. debian-stretch-jenkins: move from osmo-ci.git — Oliver Smith / detail
  2. debian-buster-erlang: rename user to "build" — Oliver Smith / detail

#4 (Jan 9, 2020, 10:26:09 PM)

  1. Add debian-buster-simtrace2 Dockerfile — laforge / detail

#3 (Jan 9, 2020, 10:16:09 PM)

  1. start debian-buster-build as copy of debian-jessie-build — laforge / detail
  2. debian-buster-build: actually switch to buster — laforge / detail
  3. debian-*-build: Add {gcc,newlib}-arm-none-eabi for simtrace2 firmware — laforge / detail
  4. docker-*-build: Add missign dependency to stow — laforge / detail